>>> logrotate: Building main/logrotate 3.18.0-r3 (using abuild 3.7.0-r0) started Tue, 21 Jun 2022 08:22:56 +0000
>>> logrotate: Checking sanity of /home/buildozer/aports/main/logrotate/APKBUILD...
>>> WARNING: logrotate: logrotate.post-upgrade: found chmod
             Permissions should be fixed in APKBUILD package()
>>> logrotate: Analyzing dependencies...
>>> logrotate: Installing for build: build-base popt-dev autoconf automake libtool coreutils
(1/19) Installing popt-dev (1.18-r0)
(2/19) Installing m4 (1.4.18-r2)
(3/19) Installing libbz2 (1.0.8-r1)
(4/19) Installing perl (5.32.0-r0)
(5/19) Installing autoconf (2.69-r3)
(6/19) Installing automake (1.16.3-r0)
(7/19) Installing readline (8.1.0-r0)
(8/19) Installing bash (5.1.16-r0)
Executing bash-5.1.16-r0.post-install
(9/19) Installing libltdl (2.4.6-r7)
(10/19) Installing libtool (2.4.6-r7)
(11/19) Installing skalibs (2.10.0.0-r0)
(12/19) Installing s6-ipcserver (2.10.0.0-r0)
(13/19) Installing utmps (0.1.0.0-r0)
Executing utmps-0.1.0.0-r0.pre-install
(14/19) Installing coreutils (8.32-r2)
(15/19) Installing .makedepends-logrotate (20220621.082256)
(16/19) Installing utmps-openrc (0.1.0.0-r0)
(17/19) Installing perl-error (0.17029-r1)
(18/19) Installing perl-git (2.30.3-r0)
(19/19) Installing git-perl (2.30.3-r0)
Executing busybox-1.32.1-r8.trigger
OK: 388 MiB in 107 packages
>>> logrotate: Cleaning up srcdir
>>> logrotate: Cleaning up pkgdir
>>> logrotate: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/logrotate-3.18.0.tar.xz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  158k  100  158k    0     0   214k      0 --:--:-- --:--:-- --:--:--  214k
>>> logrotate: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/logrotate-3.18.0.tar.xz
>>> logrotate: Checking sha512sums...
logrotate-3.18.0.tar.xz: OK
CVE-2022-1348.patch: OK
logrotate.cron: OK
logrotate.conf: OK
logrotate.confd: OK
>>> logrotate: Unpacking /var/cache/distfiles/v3.13/logrotate-3.18.0.tar.xz...
>>> logrotate: CVE-2022-1348.patch
patching file logrotate.c
Hunk #1 succeeded at 2564 (offset -100 lines).
Hunk #2 succeeded at 2901 (offset -106 lines).
Hunk #3 succeeded at 2908 (offset -109 lines).
Hunk #4 succeeded at 2930 (offset -109 lines).
patching file logrotate.spec.in
patching file test/test-0087.sh
The logrotate build system is now prepared.  To build here, run:
  ./configure && make
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make supports the include directive... yes (GNU style)
checking for aarch64-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for aarch64-alpine-linux-musl-gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking for struct stat.st_blksize... yes
checking for struct stat.st_blocks... yes
checking build system type... aarch64-alpine-linux-musl
checking host system type... aarch64-alpine-linux-musl
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking for poptParseArgvString in -lpopt... yes
checking for getfscreatecon_raw in -lselinux... no
checking for acl_get_file in -lacl... no
checking for asprintf... yes
checking for madvise... yes
checking for qsort... yes
checking for secure_getenv... yes
checking for strndup... yes
checking for strptime... yes
checking for utimensat... yes
checking for vsyslog... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating test/Makefile
config.status: creating logrotate.8
config.status: creating logrotate.spec
config.status: creating config.h
config.status: executing depfiles commands

  logrotate 3.18.0

  SELinux support:        no
  ACL support:            no
  default mail command:   /bin/mail
  compress command:       /bin/gzip
  uncompress command:     /bin/gunzip
  compress extension:     .gz
  statefile path:         /var/lib/logrotate.status

make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making all in .
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
  CC       config.o
  CC       log.o
  CC       logrotate.o
  CCLD     logrotate
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making all in test
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
test .. = .. || ln -fs ../test/* .
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[1]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
make  check-recursive
make[1]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making check in .
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making check in test
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make  check-TESTS
make[3]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[4]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
SKIP: test-0032.sh
SKIP: test-0047.sh
SKIP: test-0035.sh
SKIP: test-0033.sh
SKIP: test-0048.sh
PASS: test-0034.sh
PASS: test-0059.sh
PASS: test-0051.sh
PASS: test-0021.sh
PASS: test-0040.sh
PASS: test-0022.sh
PASS: test-0019.sh
PASS: test-0020.sh
PASS: test-0067.sh
PASS: test-0066.sh
PASS: test-0065.sh
PASS: test-0036.sh
PASS: test-0046.sh
PASS: test-0025.sh
PASS: test-0064.sh
PASS: test-0058.sh
PASS: test-0030.sh
PASS: test-0049.sh
PASS: test-0028.sh
PASS: test-0017.sh
PASS: test-0002.sh
PASS: test-0061.sh
PASS: test-0031.sh
PASS: test-0027.sh
PASS: test-0053.sh
PASS: test-0029.sh
PASS: test-0013.sh
PASS: test-0023.sh
PASS: test-0045.sh
PASS: test-0012.sh
PASS: test-0016.sh
PASS: test-0024.sh
PASS: test-0014.sh
PASS: test-0060.sh
PASS: test-0026.sh
PASS: test-0069.sh
PASS: test-0038.sh
PASS: test-0052.sh
PASS: test-0011.sh
PASS: test-0018.sh
PASS: test-0009.sh
PASS: test-0057.sh
PASS: test-0015.sh
PASS: test-0037.sh
PASS: test-0044.sh
PASS: test-0041.sh
PASS: test-0008.sh
PASS: test-0063.sh
PASS: test-0062.sh
PASS: test-0039.sh
PASS: test-0006.sh
PASS: test-0043.sh
PASS: test-0004.sh
PASS: test-0005.sh
PASS: test-0042.sh
PASS: test-0007.sh
PASS: test-0071.sh
PASS: test-0050.sh
PASS: test-0010.sh
PASS: test-0080.sh
PASS: test-0081.sh
PASS: test-0083.sh
PASS: test-0088.sh
PASS: test-0079.sh
PASS: test-0084.sh
PASS: test-0078.sh
PASS: test-0074.sh
PASS: test-0077.sh
PASS: test-0001.sh
PASS: test-0076.sh
PASS: test-0075.sh
PASS: test-0100.sh
PASS: test-0101.sh
PASS: test-0070.sh
PASS: test-0073.sh
PASS: test-0085.sh
PASS: test-0086.sh
PASS: test-0072.sh
PASS: test-0003.sh
PASS: test-0056.sh
PASS: test-0054.sh
PASS: test-0082.sh
PASS: test-0055.sh
PASS: test-0087.sh
PASS: test-0068.sh
============================================================================
Testsuite summary for logrotate 3.18.0
============================================================================
# TOTAL: 90
# PASS:  85
# SKIP:  5
# XFAIL: 0
# FAIL:  0
# XPASS: 0
# ERROR: 0
============================================================================
make[4]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[3]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[1]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
>>> logrotate: Entering fakeroot...
make  install-recursive
make[1]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making install in .
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
make[3]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
 /bin/mkdir -p '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/share/man/man5'
 /bin/mkdir -p '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/share/man/man8'
 /usr/bin/install -c -m 644 logrotate.8 '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/share/man/man8'
 /usr/bin/install -c -m 644 logrotate.conf.5 '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/share/man/man5'
 /bin/mkdir -p '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/sbin'
  /usr/bin/install -c logrotate '/home/buildozer/aports/main/logrotate/pkg/logrotate/usr/sbin'
make[3]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
Making install in test
make[2]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[3]: Entering directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[2]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0/test'
make[1]: Leaving directory '/home/buildozer/aports/main/logrotate/src/logrotate-3.18.0'
>>> logrotate-doc*: Running split function doc...
>>> logrotate-doc*: Preparing subpackage logrotate-doc...
>>> logrotate-doc*: Running postcheck for logrotate-doc
>>> logrotate-openrc*: Running split function openrc...
>>> logrotate-openrc*: Preparing subpackage logrotate-openrc...
>>> logrotate-openrc*: Running postcheck for logrotate-openrc
>>> logrotate*: Running postcheck for logrotate
>>> logrotate*: Preparing package logrotate...
>>> logrotate*: Stripping binaries
>>> logrotate*: Script found. /bin/sh added as a dependency for logrotate-3.18.0-r3.apk
>>> logrotate*: Adding .post-upgrade
>>> logrotate-doc*: Scanning shared objects
>>> logrotate-openrc*: Scanning shared objects
>>> logrotate*: Scanning shared objects
>>> logrotate-doc*: Tracing dependencies...
>>> logrotate-doc*: Package size: 40.0 KB
>>> logrotate-doc*: Compressing data...
>>> logrotate-doc*: Create checksum...
>>> logrotate-doc*: Create logrotate-doc-3.18.0-r3.apk
>>> logrotate-openrc*: Tracing dependencies...
>>> logrotate-openrc*: Package size: 16.0 KB
>>> logrotate-openrc*: Compressing data...
>>> logrotate-openrc*: Create checksum...
>>> logrotate-openrc*: Create logrotate-openrc-3.18.0-r3.apk
>>> logrotate*: Tracing dependencies...
	/bin/sh
	so:libc.musl-aarch64.so.1
	so:libpopt.so.0
>>> logrotate*: Package size: 104.0 KB
>>> logrotate*: Compressing data...
>>> logrotate*: Create checksum...
>>> logrotate*: Create logrotate-3.18.0-r3.apk
>>> logrotate: Build complete at Tue, 21 Jun 2022 08:23:15 +0000 elapsed time 0h 0m 19s
>>> logrotate: Cleaning up srcdir
>>> logrotate: Cleaning up pkgdir
>>> logrotate: Uninstalling dependencies...
(1/19) Purging .makedepends-logrotate (20220621.082256)
(2/19) Purging popt-dev (1.18-r0)
(3/19) Purging autoconf (2.69-r3)
(4/19) Purging m4 (1.4.18-r2)
(5/19) Purging automake (1.16.3-r0)
(6/19) Purging libtool (2.4.6-r7)
(7/19) Purging bash (5.1.16-r0)
Executing bash-5.1.16-r0.pre-deinstall
(8/19) Purging libltdl (2.4.6-r7)
(9/19) Purging coreutils (8.32-r2)
Executing coreutils-8.32-r2.post-deinstall
(10/19) Purging utmps-openrc (0.1.0.0-r0)
(11/19) Purging git-perl (2.30.3-r0)
(12/19) Purging perl-git (2.30.3-r0)
(13/19) Purging perl-error (0.17029-r1)
(14/19) Purging perl (5.32.0-r0)
(15/19) Purging libbz2 (1.0.8-r1)
(16/19) Purging readline (8.1.0-r0)
(17/19) Purging utmps (0.1.0.0-r0)
(18/19) Purging s6-ipcserver (2.10.0.0-r0)
(19/19) Purging skalibs (2.10.0.0-r0)
Executing busybox-1.32.1-r8.trigger
OK: 342 MiB in 88 packages
>>> logrotate: Updating the main/aarch64 repository index...
>>> logrotate: Signing the index...