>>> ccid: Building community/ccid 1.4.34-r0 (using abuild 3.7.0-r0) started Mon, 25 Jan 2021 05:08:19 +0000
>>> ccid: Checking sanity of /home/buildozer/aports/community/ccid/APKBUILD...
>>> ccid: Analyzing dependencies...
>>> ccid: Installing for build: build-base pcsc-lite perl libusb-dev pcsc-lite-dev
(1/20) Installing eudev-libs (3.2.9-r3)
(2/20) Installing pcsc-lite (1.9.0-r0)
Executing pcsc-lite-1.9.0-r0.pre-install
(3/20) Installing libbz2 (1.0.8-r1)
(4/20) Installing perl (5.32.0-r0)
(5/20) Installing libusb (1.0.24-r0)
(6/20) Installing libusb-dev (1.0.24-r0)
(7/20) Installing udev-init-scripts (34-r0)
Executing udev-init-scripts-34-r0.post-install
(8/20) Installing libblkid (2.36.1-r1)
(9/20) Installing xz-libs (5.2.5-r0)
(10/20) Installing kmod-libs (28-r0)
(11/20) Installing eudev (3.2.9-r3)
(12/20) Installing eudev-dev (3.2.9-r3)
(13/20) Installing pcsc-lite-libs (1.9.0-r0)
(14/20) Installing pcsc-lite-dev (1.9.0-r0)
(15/20) Installing .makedepends-ccid (20210125.050820)
(16/20) Installing udev-init-scripts-openrc (34-r0)
(17/20) Installing eudev-openrc (3.2.9-r3)
(18/20) Installing perl-error (0.17029-r1)
(19/20) Installing perl-git (2.30.0-r0)
(20/20) Installing git-perl (2.30.0-r0)
Executing busybox-1.32.1-r2.trigger
Executing eudev-3.2.9-r3.trigger
OK: 344 MiB in 106 packages
>>> ccid: Cleaning up srcdir
>>> ccid: Cleaning up pkgdir
>>> ccid: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/ccid-1.4.34.tar.bz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  651k  100  651k    0     0  7759k      0 --:--:-- --:--:-- --:--:-- 7759k
>>> ccid: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/ccid-1.4.34.tar.bz2
>>> ccid: Checking sha512sums...
ccid-1.4.34.tar.bz2: OK
>>> ccid: Unpacking /var/cache/distfiles/v3.13/ccid-1.4.34.tar.bz2...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... i586-alpine-linux-musl
checking host system type... i586-alpine-linux-musl
checking whether to enable maintainer-specific portions of Makefiles... no
checking for i586-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... yes
checking for flex... no
checking for lex... no
checking for i586-alpine-linux-musl-ar... no
checking for i586-alpine-linux-musl-lib... no
checking for i586-alpine-linux-musl-link... no
checking for ar... ar
checking the archiver (ar) interface... ar
checking for i586-alpine-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libpcsclite >= 1.8.3... yes
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking ifdhandler.h usability... yes
checking ifdhandler.h presence... yes
checking for ifdhandler.h... yes
checking reader.h usability... yes
checking reader.h presence... yes
checking for reader.h... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/i586-alpine-linux-musl/bin/ld
checking if the linker (/usr/i586-alpine-linux-musl/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 98304
checking how to convert i586-alpine-linux-musl file names to i586-alpine-linux-musl format... func_convert_file_noop
checking how to convert i586-alpine-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/i586-alpine-linux-musl/bin/ld option to reload object files... -r
checking for i586-alpine-linux-musl-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for i586-alpine-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for i586-alpine-linux-musl-ar... ar
checking for archiver @FILE support... @
checking for i586-alpine-linux-musl-strip... no
checking for strip... strip
checking for i586-alpine-linux-musl-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for i586-alpine-linux-musl-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/i586-alpine-linux-musl/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for ANSI C header files... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking for string.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for select... yes
checking for strerror... yes
checking for strncpy... yes
checking for memcpy... yes
checking for strlcpy... yes
checking for strlcat... yes
checking for libusb-1.0 >= 1.0.9... yes
checking libusb.h usability... yes
checking libusb.h presence... yes
checking for libusb.h... yes
checking for libusb_init... yes
checking for -fvisibility=hidden... yes
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for SCardEstablishContext... yes

libccid has been configured with following options:

Version:             1.4.34
User binaries:       /usr/bin
Configuration files: /etc


Host:                i586-alpine-linux-musl
Compiler:            gcc
Preprocessor flags:  -Os -fomit-frame-pointer
Compiler flags:      -Os -fomit-frame-pointer
Preprocessor flags:  -Os -fomit-frame-pointer
Linker flags:        -Wl,--as-needed
Libraries:           

PCSC_CFLAGS:         -I/usr/include/PCSC 
PCSC_LIBS:           -lpcsclite 
PTHREAD_CFLAGS:      
PTHREAD_LIBS:        
BUNDLE_HOST:         Linux
DYN_LIB_EXT:         so
LIBUSB_CFLAGS:       -I/usr/include/libusb-1.0 
LIBUSB_LIBS:         -lusb-1.0 
SYMBOL_VISIBILITY:   -fvisibility=hidden
NOCLASS:             

libusb support:          yes
composite as multislot:  no
multi threading:         yes
bundle directory name:   ifd-ccid.bundle
USB drop directory:      /usr/lib/pcsc/drivers
serial Twin support:     no
serial twin install dir: /usr/lib/pcsc/drivers/serial
serial config directory: /etc/reader.conf.d
compiled for pcsc-lite:  yes
syslog debug:            no
os_log debug:            no
class driver:            yes

checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating readers/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/Kobil_mIDentity_switch/Makefile
config.status: creating contrib/RSA_SecurID/Makefile
config.status: creating examples/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
Making all in readers
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
Making all in examples
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
  CC       scardcontrol-scardcontrol.o
  CC       scardcontrol-PCSCv2part10.o
  CCLD     scardcontrol
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
Making all in contrib
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
Making all in Kobil_mIDentity_switch
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
  CC       Kobil_mIDentity_switch-Kobil_mIDentity_switch.o
  CCLD     Kobil_mIDentity_switch
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
Making all in RSA_SecurID
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
  CC       RSA_SecurID_getpasswd-RSA_SecurID_getpasswd.o
  CCLD     RSA_SecurID_getpasswd
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
Making all in src
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/src'
  CC       parse-parse.o
  CC       parse-debug.o
  CC       parse-ccid_usb.o
  LEX      tokenparser.c
  CC       parse-strlcpy.o
  CC       parse-simclist.o
  CC       libccid_la-ccid.lo
  CC       libccid_la-commands.lo
  CC       libccid_la-ifdhandler.lo
  CC       libccid_la-utils.lo
  CC       libccid_la-ccid_usb.lo
  CC       libccid_la-tokenparser.lo
  CC       libccid_la-strlcpy.lo
  CC       libccid_la-simclist.lo
  CC       parse-tokenparser.o
  CC       towitoko/libccid_la-atr.lo
  CC       towitoko/libccid_la-pps.lo
  CC       openct/libccid_la-buffer.lo
  CC       openct/libccid_la-checksum.lo
  CC       openct/libccid_la-proto-t1.lo
  CCLD     parse
  CCLD     libccid.la
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/src'
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
>>> WARNING: ccid: APKBUILD does not run any tests!
    Alpine policy will soon require that packages have any relevant testsuites run during the build process.
    To fix, either define a check() function, or declare !check in $options to indicate the package does not have a testsuite.
>>> ccid: Entering fakeroot...
Making install in readers
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/readers'
Making install in examples
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/examples'
Making install in contrib
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
Making install in Kobil_mIDentity_switch
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/Kobil_mIDentity_switch'
Making install in RSA_SecurID
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib/RSA_SecurID'
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[3]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/contrib'
Making install in src
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/src'
  LEX      tokenparser.c
./create_Info_plist.pl ./../readers/supported_readers.txt ./Info.plist.src --target=libccid.so --version=1.4.34  > Info.plist
/bin/sh /home/buildozer/aports/community/ccid/src/ccid-1.4.34/install-sh -d "/home/buildozer/aports/community/ccid/pkg/ccid/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/"
cp Info.plist "/home/buildozer/aports/community/ccid/pkg/ccid/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/"
cp .libs/libccid.so "/home/buildozer/aports/community/ccid/pkg/ccid/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so"
***************
copy the src/92_pcscd_ccid.rules file in udev directory (/etc/udev/rules.d/)
***************
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34/src'
make[1]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
make[2]: Entering directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
make[1]: Leaving directory '/home/buildozer/aports/community/ccid/src/ccid-1.4.34'
>>> ccid*: Running postcheck for ccid
>>> ccid*: Preparing package ccid...
>>> ccid*: Stripping binaries
>>> ccid*: Scanning shared objects
>>> ccid*: Tracing dependencies...
	pcsc-lite
	so:libc.musl-x86.so.1
	so:libusb-1.0.so.0
>>> ccid*: Package size: 208.0 KB
>>> ccid*: Compressing data...
>>> ccid*: Create checksum...
>>> ccid*: Create ccid-1.4.34-r0.apk
>>> ccid: Build complete at Mon, 25 Jan 2021 05:08:30 +0000 elapsed time 0h 0m 11s
>>> ccid: Cleaning up srcdir
>>> ccid: Cleaning up pkgdir
>>> ccid: Uninstalling dependencies...
(1/20) Purging .makedepends-ccid (20210125.050820)
(2/20) Purging pcsc-lite (1.9.0-r0)
(3/20) Purging libusb-dev (1.0.24-r0)
(4/20) Purging libusb (1.0.24-r0)
(5/20) Purging pcsc-lite-dev (1.9.0-r0)
(6/20) Purging eudev-dev (3.2.9-r3)
(7/20) Purging eudev-openrc (3.2.9-r3)
(8/20) Purging eudev (3.2.9-r3)
(9/20) Purging udev-init-scripts-openrc (34-r0)
(10/20) Purging udev-init-scripts (34-r0)
(11/20) Purging eudev-libs (3.2.9-r3)
(12/20) Purging pcsc-lite-libs (1.9.0-r0)
(13/20) Purging git-perl (2.30.0-r0)
(14/20) Purging perl-git (2.30.0-r0)
(15/20) Purging perl-error (0.17029-r1)
(16/20) Purging perl (5.32.0-r0)
(17/20) Purging libbz2 (1.0.8-r1)
(18/20) Purging libblkid (2.36.1-r1)
(19/20) Purging kmod-libs (28-r0)
(20/20) Purging xz-libs (5.2.5-r0)
Executing busybox-1.32.1-r2.trigger
OK: 310 MiB in 86 packages
>>> ccid: Updating the community/x86 repository index...
>>> ccid: Signing the index...