>>> py3-cu2qu: Building community/py3-cu2qu 1.6.7-r0 (using abuild 3.7.0_rc1-r1) started Mon, 21 Dec 2020 10:05:31 +0000
>>> py3-cu2qu: Checking sanity of /home/buildozer/aports/community/py3-cu2qu/APKBUILD...
>>> py3-cu2qu: Analyzing dependencies...
>>> py3-cu2qu: Installing for build: build-base python3 py3-fonttools py3-defcon py3-setuptools python3-dev cython py3-pytest py3-coverage
(1/35) Installing libbz2 (1.0.8-r1)
(2/35) Installing libffi (3.3-r2)
(3/35) Installing gdbm (1.18.1-r0)
(4/35) Installing xz-libs (5.2.5-r0)
(5/35) Installing readline (8.0.4-r0)
(6/35) Installing sqlite-libs (3.34.0-r0)
(7/35) Installing python3 (3.8.6-r0)
(8/35) Installing py3-ordered-set (4.0.2-r0)
(9/35) Installing py3-appdirs (1.4.4-r1)
(10/35) Installing py3-parsing (2.4.7-r1)
(11/35) Installing py3-six (1.15.0-r0)
(12/35) Installing py3-packaging (20.8-r0)
(13/35) Installing py3-setuptools (51.0.0-r0)
(14/35) Installing libgpg-error (1.39-r0)
(15/35) Installing libgcrypt (1.8.7-r0)
(16/35) Installing libxml2 (2.9.10-r5)
(17/35) Installing libxslt (1.1.34-r0)
(18/35) Installing py3-lxml (4.6.2-r0)
(19/35) Installing py3-tz (2020.4-r0)
(20/35) Installing py3-fs (2.4.11-r1)
(21/35) Installing cython (0.29.21-r0)
(22/35) Installing python3-dev (3.8.6-r0)
(23/35) Installing py3-fonttools (4.18.1-r0)
(24/35) Installing py3-defcon (0.7.2-r0)
(25/35) Installing py3-atomicwrites (1.4.0-r0)
(26/35) Installing py3-attrs (20.3.0-r0)
(27/35) Installing py3-more-itertools (8.6.0-r0)
(28/35) Installing py3-iniconfig (1.1.1-r0)
(29/35) Installing py3-pluggy (0.13.1-r1)
(30/35) Installing py3-py (1.10.0-r0)
(31/35) Installing py3-wcwidth (0.2.5-r0)
(32/35) Installing py3-toml (0.10.2-r0)
(33/35) Installing py3-pytest (6.2.1-r0)
(34/35) Installing py3-coverage (5.3-r0)
(35/35) Installing .makedepends-py3-cu2qu (20201221.100539)
Executing busybox-1.32.0-r8.trigger
OK: 424 MiB in 121 packages
>>> py3-cu2qu: Cleaning up srcdir
>>> py3-cu2qu: Cleaning up pkgdir
>>> py3-cu2qu: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/py3-cu2qu-1.6.7.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 81401  100 81401    0     0  1324k      0 --:--:-- --:--:-- --:--:-- 1347k
>>> py3-cu2qu: Fetching https://distfiles.alpinelinux.org/distfiles/v3.13/py3-cu2qu-1.6.7.tar.gz
>>> py3-cu2qu: Checking sha512sums...
py3-cu2qu-1.6.7.tar.gz: OK
>>> py3-cu2qu: Unpacking /var/cache/distfiles/v3.13/py3-cu2qu-1.6.7.tar.gz...
Initialized empty Git repository in /home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.git/
WARNING: The pip package is not available, falling back to EasyInstall for handling setup_requires/test_requires; this is deprecated and will be removed in a future version.
running build
running build_py
creating build
creating build/lib.linux-i686-3.8
creating build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/cli.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/ufo.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/__init__.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/errors.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/__main__.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/_version.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/cu2qu.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/pens.py -> build/lib.linux-i686-3.8/cu2qu
copying Lib/cu2qu/cython.py -> build/lib.linux-i686-3.8/cu2qu
running egg_info
creating Lib/cu2qu.egg-info
writing Lib/cu2qu.egg-info/PKG-INFO
writing dependency_links to Lib/cu2qu.egg-info/dependency_links.txt
writing entry points to Lib/cu2qu.egg-info/entry_points.txt
writing requirements to Lib/cu2qu.egg-info/requires.txt
writing top-level names to Lib/cu2qu.egg-info/top_level.txt
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
Compiling Lib/cu2qu/cu2qu.py because it changed.
[1/1] Cythonizing Lib/cu2qu/cu2qu.py
fatal: not a valid object name: HEAD
listing git files failed - pretending there aren't any
Traceback (most recent call last):
  File "/usr/lib/python3.8/tarfile.py", line 2313, in next
    tarinfo = self.tarinfo.fromtarfile(self)
  File "/usr/lib/python3.8/tarfile.py", line 1103, in fromtarfile
    obj = cls.frombuf(buf, tarfile.encoding, tarfile.errors)
  File "/usr/lib/python3.8/tarfile.py", line 1039, in frombuf
    raise EmptyHeaderError("empty header")
tarfile.EmptyHeaderError: empty header

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 51, in _git_ls_files_and_dirs
    return _git_interpret_archive(proc.stdout, toplevel)
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 32, in _git_interpret_archive
    with tarfile.open(fileobj=fd, mode="r|*") as tf:
  File "/usr/lib/python3.8/tarfile.py", line 1631, in open
    t = cls(name, filemode, stream, **kwargs)
  File "/usr/lib/python3.8/tarfile.py", line 1512, in __init__
    self.firstmember = self.next()
  File "/usr/lib/python3.8/tarfile.py", line 2328, in next
    raise ReadError("empty file")
tarfile.ReadError: empty file
reading manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
copying Lib/cu2qu/cu2qu.c -> build/lib.linux-i686-3.8/cu2qu
running build_ext
building 'cu2qu.cu2qu' extension
creating build/temp.linux-i686-3.8
creating build/temp.linux-i686-3.8/Lib
creating build/temp.linux-i686-3.8/Lib/cu2qu
gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fomit-frame-pointer -g -fno-semantic-interposition -fomit-frame-pointer -g -fno-semantic-interposition -fomit-frame-pointer -g -fno-semantic-interposition -DTHREAD_STACK_SIZE=0x100000 -Os -fomit-frame-pointer -Os -fomit-frame-pointer -fPIC -DCYTHON_TRACE_NOGIL=1 -I/usr/include/python3.8 -c Lib/cu2qu/cu2qu.c -o build/temp.linux-i686-3.8/Lib/cu2qu/cu2qu.o
gcc -shared -Wl,--as-needed -Wl,--as-needed -Wl,--as-needed -Os -fomit-frame-pointer -Os -fomit-frame-pointer build/temp.linux-i686-3.8/Lib/cu2qu/cu2qu.o -L/usr/lib -o build/lib.linux-i686-3.8/cu2qu/cu2qu.cpython-38-i386-linux-gnu.so
WARNING: The pip package is not available, falling back to EasyInstall for handling setup_requires/test_requires; this is deprecated and will be removed in a future version.
WARNING: The pip package is not available, falling back to EasyInstall for handling setup_requires/test_requires; this is deprecated and will be removed in a future version.
running pytest
running egg_info
writing Lib/cu2qu.egg-info/PKG-INFO
writing dependency_links to Lib/cu2qu.egg-info/dependency_links.txt
writing entry points to Lib/cu2qu.egg-info/entry_points.txt
writing requirements to Lib/cu2qu.egg-info/requires.txt
writing top-level names to Lib/cu2qu.egg-info/top_level.txt
fatal: not a valid object name: HEAD
listing git files failed - pretending there aren't any
Traceback (most recent call last):
  File "/usr/lib/python3.8/tarfile.py", line 2313, in next
    tarinfo = self.tarinfo.fromtarfile(self)
  File "/usr/lib/python3.8/tarfile.py", line 1103, in fromtarfile
    obj = cls.frombuf(buf, tarfile.encoding, tarfile.errors)
  File "/usr/lib/python3.8/tarfile.py", line 1039, in frombuf
    raise EmptyHeaderError("empty header")
tarfile.EmptyHeaderError: empty header

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 51, in _git_ls_files_and_dirs
    return _git_interpret_archive(proc.stdout, toplevel)
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 32, in _git_interpret_archive
    with tarfile.open(fileobj=fd, mode="r|*") as tf:
  File "/usr/lib/python3.8/tarfile.py", line 1631, in open
    t = cls(name, filemode, stream, **kwargs)
  File "/usr/lib/python3.8/tarfile.py", line 1512, in __init__
    self.firstmember = self.next()
  File "/usr/lib/python3.8/tarfile.py", line 2328, in next
    raise ReadError("empty file")
tarfile.ReadError: empty file
reading manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
running build_ext
copying build/lib.linux-i686-3.8/cu2qu/cu2qu.cpython-38-i386-linux-gnu.so -> Lib/cu2qu
============================= test session starts ==============================
platform linux -- Python 3.8.6, pytest-6.2.1, py-1.10.0, pluggy-0.13.1 -- /usr/bin/python3
cachedir: .pytest_cache
rootdir: /home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7, configfile: setup.cfg, testpaths: tests
collecting ... collected 67 items

tests/cli_test.py::MainTest::test_single_input_no_output PASSED
tests/cli_test.py::MainTest::test_single_input_output_file PASSED
tests/cli_test.py::MainTest::test_multiple_inputs_output_dir PASSED
tests/cli_test.py::MainTest::test_interpolatable_inplace PASSED
tests/cli_test.py::MainTest::test_copytree[normal] PASSED
tests/cli_test.py::MainTest::test_copytree[interpolatable] PASSED
tests/cli_test.py::MainTest::test_multiprocessing PASSED
tests/cli_test.py::MainTest::test_keep_direction PASSED
tests/cli_test.py::MainTest::test_conversion_error PASSED
tests/cli_test.py::MainTest::test_conversion_error_short PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_does_not_exceed_tolerance PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_does_not_exceed_tolerance_multiple PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_results_unchanged PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_results_unchanged_multiple PASSED
single errors
1.6: # (1)
2.4: # (4)
2.5: # (1)
2.6: ### (26)
2.7: #### (36)
2.8: ####### (61)
2.9: ####### (67)
3.0: ####### (64)
3.1: ####### (63)
3.2: ###### (51)
3.3: ###### (51)
3.4: ###### (54)
3.5: ##### (40)
3.6: ##### (44)
3.7: ###### (52)
3.8: ###### (55)
3.9: ##### (48)
4.0: #### (34)
4.1: ### (27)
4.2: ##### (43)
4.3: #### (32)
4.4: #### (30)
4.5: ### (27)
4.6: #### (32)
4.7: ## (18)
4.8: ### (21)
4.9: ## (17)
5.0: # (1)

compatible errors
0.2: # (2)
0.3: # (4)
0.4: # (4)
0.5: # (2)
0.6: # (4)
0.7: # (4)
0.8: # (6)
0.9: # (6)
1.0: # (5)
1.1: # (4)
1.2: # (8)
1.3: # (6)
1.4: # (2)
1.5: ## (11)
1.6: # (3)
1.7: ## (10)
1.8: # (4)
1.9: ## (11)
2.0: # (5)
2.1: # (4)
2.2: # (7)
2.3: ## (10)
2.4: # (3)
2.5: # (5)
2.6: ## (11)
2.7: ## (11)
2.8: ## (12)
2.9: ## (13)
3.0: ## (13)
3.1: ## (12)
3.2: ## (10)
3.3: # (5)
3.4: ## (10)
3.5: # (6)
3.6: # (6)
3.7: # (6)
3.8: # (7)
3.9: # (5)
4.0: # (5)
4.1: # (5)
4.2: # (7)
4.3: # (1)
4.4: # (6)
4.5: # (8)
4.6: # (6)
4.7: # (2)
4.8: # (2)
4.9: # (1)

single spline lengths
2: # (6)
3: ### (26)
4: ######### (82)
5: ######################## (232)
6: ##################################### (360)
7: ########################### (266)
8: ### (28)

compatible spline lengths
5: ## (11)
6: #### (35)
7: ##### (49)
8: # (5)

tests/pens_test.py::TestCu2QuPen::test__check_contour_closed PASSED
tests/pens_test.py::TestCu2QuPen::test__check_contour_is_open PASSED
tests/pens_test.py::TestCu2QuPen::test_addComponent PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_composite_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_mixed_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_simple_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_2_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_3_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_more_than_3_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_no_points PASSED
tests/pens_test.py::TestCu2QuPen::test_ignore_single_points PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_more_than_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_no_points PASSED
tests/pens_test.py::TestCu2QuPen::test_reverse_direction PASSED
tests/pens_test.py::TestCu2QuPen::test_stats PASSED
tests/pens_test.py::TestCu2QuPointPen::test__flushContour_restore_starting_point PASSED
tests/pens_test.py::TestCu2QuPointPen::test_addComponent PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_composite_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_mixed_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_simple_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_quad_no_oncurve PASSED
tests/pens_test.py::TestCu2QuPointPen::test_reverse_direction PASSED
tests/pens_test.py::TestCu2QuPointPen::test_stats PASSED
tests/pens_test.py::TestCu2QuPointPen::test_super_bezier_curve PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_modified PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_stats PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_dump_stats PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_remember_curve_type PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_no_remember_curve_type PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_different_glyphsets PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_em_float PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_em_list PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_float PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_list PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_both_max_err_and_max_err_em PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_single_font PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_modified[lines-only] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_modified[has-curves] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_stats PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_max_err_float PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_max_err_list PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_reverse_direction PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_single_glyph PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_glyphs[unequal-length] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_glyphs[different-segment-types] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_fonts PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_already_quadratic PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_open_paths PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_ignore_components PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_overlapping_start_end_points PASSED
tests/utils.py::tests.utils._repr_pen_commands PASSED

=============================== warnings summary ===============================
../../../../../../../usr/lib/python3.8/site-packages/fontTools/misc/py23.py:11
  /usr/lib/python3.8/site-packages/fontTools/misc/py23.py:11: DeprecationWarning: The py23 module has been deprecated and will be removed in the next release. Please update your code.
    warnings.warn(

-- Docs: https://docs.pytest.org/en/stable/warnings.html
======================== 67 passed, 1 warning in 12.30s ========================
>>> py3-cu2qu: Entering fakeroot...
WARNING: The pip package is not available, falling back to EasyInstall for handling setup_requires/test_requires; this is deprecated and will be removed in a future version.
running install
running build
running build_py
copying Lib/cu2qu/_version.py -> build/lib.linux-i686-3.8/cu2qu
running egg_info
writing Lib/cu2qu.egg-info/PKG-INFO
writing dependency_links to Lib/cu2qu.egg-info/dependency_links.txt
writing entry points to Lib/cu2qu.egg-info/entry_points.txt
writing requirements to Lib/cu2qu.egg-info/requires.txt
writing top-level names to Lib/cu2qu.egg-info/top_level.txt
fatal: not a valid object name: HEAD
listing git files failed - pretending there aren't any
Traceback (most recent call last):
  File "/usr/lib/python3.8/tarfile.py", line 2313, in next
    tarinfo = self.tarinfo.fromtarfile(self)
  File "/usr/lib/python3.8/tarfile.py", line 1103, in fromtarfile
    obj = cls.frombuf(buf, tarfile.encoding, tarfile.errors)
  File "/usr/lib/python3.8/tarfile.py", line 1039, in frombuf
    raise EmptyHeaderError("empty header")
tarfile.EmptyHeaderError: empty header

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 51, in _git_ls_files_and_dirs
    return _git_interpret_archive(proc.stdout, toplevel)
  File "/home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7/.eggs/setuptools_scm-5.0.1-py3.8.egg/setuptools_scm/file_finder_git.py", line 32, in _git_interpret_archive
    with tarfile.open(fileobj=fd, mode="r|*") as tf:
  File "/usr/lib/python3.8/tarfile.py", line 1631, in open
    t = cls(name, filemode, stream, **kwargs)
  File "/usr/lib/python3.8/tarfile.py", line 1512, in __init__
    self.firstmember = self.next()
  File "/usr/lib/python3.8/tarfile.py", line 2328, in next
    raise ReadError("empty file")
tarfile.ReadError: empty file
reading manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
running build_ext
running install_lib
creating /home/buildozer/aports/community/py3-cu2qu/pkg
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/cli.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/cu2qu.c -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/ufo.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/cu2qu.cpython-38-i386-linux-gnu.so -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/__init__.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/errors.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/__main__.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/_version.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/cu2qu.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/pens.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
copying build/lib.linux-i686-3.8/cu2qu/cython.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/cli.py to cli.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/ufo.py to ufo.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/__init__.py to __init__.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/errors.py to errors.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/__main__.py to __main__.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/_version.py to _version.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/cu2qu.py to cu2qu.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/pens.py to pens.cpython-38.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu/cython.py to cython.cpython-38.pyc
running install_egg_info
Copying Lib/cu2qu.egg-info to /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.8/site-packages/cu2qu-0.1.dev0-py3.8.egg-info
running install_scripts
Installing cu2qu script to /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/bin
>>> py3-cu2qu*: Running postcheck for py3-cu2qu
>>> py3-cu2qu*: Preparing package py3-cu2qu...
>>> py3-cu2qu*: Stripping binaries
>>> py3-cu2qu*: Scanning shared objects
>>> py3-cu2qu*: Tracing dependencies...
	python3
	py3-fonttools
	py3-defcon
	so:libc.musl-x86.so.1
>>> py3-cu2qu*: Package size: 892.0 KB
>>> py3-cu2qu*: Compressing data...
>>> py3-cu2qu*: Create checksum...
>>> py3-cu2qu*: Create py3-cu2qu-1.6.7-r0.apk
>>> py3-cu2qu: Build complete at Mon, 21 Dec 2020 10:06:05 +0000 elapsed time 0h 0m 34s
>>> py3-cu2qu: Cleaning up srcdir
>>> py3-cu2qu: Cleaning up pkgdir
>>> py3-cu2qu: Uninstalling dependencies...
(1/35) Purging .makedepends-py3-cu2qu (20201221.100539)
(2/35) Purging py3-defcon (0.7.2-r0)
(3/35) Purging py3-fonttools (4.18.1-r0)
(4/35) Purging py3-lxml (4.6.2-r0)
(5/35) Purging py3-fs (2.4.11-r1)
(6/35) Purging py3-tz (2020.4-r0)
(7/35) Purging python3-dev (3.8.6-r0)
(8/35) Purging cython (0.29.21-r0)
(9/35) Purging py3-pytest (6.2.1-r0)
(10/35) Purging py3-atomicwrites (1.4.0-r0)
(11/35) Purging py3-attrs (20.3.0-r0)
(12/35) Purging py3-more-itertools (8.6.0-r0)
(13/35) Purging py3-iniconfig (1.1.1-r0)
(14/35) Purging py3-pluggy (0.13.1-r1)
(15/35) Purging py3-py (1.10.0-r0)
(16/35) Purging py3-wcwidth (0.2.5-r0)
(17/35) Purging py3-setuptools (51.0.0-r0)
(18/35) Purging py3-ordered-set (4.0.2-r0)
(19/35) Purging py3-appdirs (1.4.4-r1)
(20/35) Purging py3-packaging (20.8-r0)
(21/35) Purging py3-parsing (2.4.7-r1)
(22/35) Purging py3-six (1.15.0-r0)
(23/35) Purging py3-toml (0.10.2-r0)
(24/35) Purging python3 (3.8.6-r0)
(25/35) Purging py3-coverage (5.3-r0)
(26/35) Purging libbz2 (1.0.8-r1)
(27/35) Purging libffi (3.3-r2)
(28/35) Purging gdbm (1.18.1-r0)
(29/35) Purging libxslt (1.1.34-r0)
(30/35) Purging libxml2 (2.9.10-r5)
(31/35) Purging xz-libs (5.2.5-r0)
(32/35) Purging readline (8.0.4-r0)
(33/35) Purging sqlite-libs (3.34.0-r0)
(34/35) Purging libgcrypt (1.8.7-r0)
(35/35) Purging libgpg-error (1.39-r0)
Executing busybox-1.32.0-r8.trigger
OK: 310 MiB in 86 packages
>>> py3-cu2qu: Updating the community/x86 repository index...
>>> py3-cu2qu: Signing the index...