>>> xset: Building community/xset 1.2.4-r0 (using abuild 3.8.0_rc3-r2) started Sat, 22 May 2021 02:49:28 +0000
>>> xset: Checking sanity of /home/buildozer/aports/community/xset/APKBUILD...
>>> xset: Analyzing dependencies...
>>> xset: Installing for build: build-base libxmu-dev libx11-dev libxext-dev util-macros
(1/47) Installing libblkid (2.36.2-r2)
(2/47) Installing blkid (2.36.2-r2)
(3/47) Installing libcap-ng (0.8.2-r0)
(4/47) Installing setpriv (2.36.2-r2)
(5/47) Installing libmount (2.36.2-r2)
(6/47) Installing libsmartcols (2.36.2-r2)
(7/47) Installing findmnt (2.36.2-r2)
(8/47) Installing mcookie (2.36.2-r2)
(9/47) Installing hexdump (2.36.2-r2)
(10/47) Installing lsblk (2.36.2-r2)
(11/47) Installing libuuid (2.36.2-r2)
(12/47) Installing libfdisk (2.36.2-r2)
(13/47) Installing sfdisk (2.36.2-r2)
(14/47) Installing cfdisk (2.36.2-r2)
(15/47) Installing partx (2.36.2-r2)
(16/47) Installing flock (2.36.2-r2)
(17/47) Installing logger (2.36.2-r2)
(18/47) Installing uuidgen (2.36.2-r2)
(19/47) Installing libeconf (0.3.8-r1)
(20/47) Installing util-linux (2.36.2-r2)
(21/47) Installing util-linux-dev (2.36.2-r2)
(22/47) Installing libxau (1.0.9-r0)
(23/47) Installing libmd (1.0.3-r0)
(24/47) Installing libbsd (0.11.3-r0)
(25/47) Installing libxdmcp (1.1.3-r0)
(26/47) Installing libxcb (1.14-r2)
(27/47) Installing libx11 (1.7.1-r0)
(28/47) Installing libxext (1.3.4-r0)
(29/47) Installing libice (1.0.10-r0)
(30/47) Installing libsm (1.2.3-r0)
(31/47) Installing libxt (1.2.1-r0)
(32/47) Installing libxmu (1.1.3-r0)
(33/47) Installing xorgproto (2021.4-r0)
(34/47) Installing libxau-dev (1.0.9-r0)
(35/47) Installing xcb-proto (1.14.1-r2)
(36/47) Installing libxdmcp-dev (1.1.3-r0)
(37/47) Installing libxcb-dev (1.14-r2)
(38/47) Installing xtrans (1.4.0-r1)
(39/47) Installing libx11-dev (1.7.1-r0)
(40/47) Installing libxext-dev (1.3.4-r0)
(41/47) Installing libice-dev (1.0.10-r0)
(42/47) Installing libsm-dev (1.2.3-r0)
(43/47) Installing libxt-dev (1.2.1-r0)
(44/47) Installing libxmu-dev (1.1.3-r0)
(45/47) Installing util-macros (1.19.3-r0)
(46/47) Installing .makedepends-xset (20210522.024943)
(47/47) Installing util-linux-openrc (2.36.2-r2)
Executing busybox-1.33.1-r1.trigger
OK: 1034 MiB in 148 packages
>>> xset: Cleaning up srcdir
>>> xset: Cleaning up pkgdir
>>> xset: Fetching https://distfiles.alpinelinux.org/distfiles/v3.14/xset-1.2.4.tar.bz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0   341    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (22) The requested URL returned error: 404
>>> xset: Fetching https://www.x.org/releases/individual/app/xset-1.2.4.tar.bz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
 33  142k   33 49152    0     0  61748      0  0:00:02 --:--:--  0:00:02 61671
100  142k  100  142k    0     0   150k      0 --:--:-- --:--:-- --:--:--  149k
>>> xset: Fetching https://distfiles.alpinelinux.org/distfiles/v3.14/xset-1.2.4.tar.bz2
>>> xset: Checking sha512sums...
xset-1.2.4.tar.bz2: OK
>>> xset: Unpacking /var/cache/distfiles/v3.14/xset-1.2.4.tar.bz2...
checking for i586-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking for gcc option to accept ISO C99... none needed
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for i586-alpine-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... i586-alpine-linux-musl
checking host system type... i586-alpine-linux-musl
checking for a sed that does not truncate output... /bin/sed
checking if gcc supports -Werror=unknown-warning-option... no
checking if gcc supports -Werror=unused-command-line-argument... no
checking if gcc supports -Wall... yes
checking if gcc supports -Wpointer-arith... yes
checking if gcc supports -Wmissing-declarations... yes
checking if gcc supports -Wformat=2... yes
checking if gcc supports -Wstrict-prototypes... yes
checking if gcc supports -Wmissing-prototypes... yes
checking if gcc supports -Wnested-externs... yes
checking if gcc supports -Wbad-function-cast... yes
checking if gcc supports -Wold-style-definition... yes
checking if gcc supports -Wdeclaration-after-statement... yes
checking if gcc supports -Wunused... yes
checking if gcc supports -Wuninitialized... yes
checking if gcc supports -Wshadow... yes
checking if gcc supports -Wmissing-noreturn... yes
checking if gcc supports -Wmissing-format-attribute... yes
checking if gcc supports -Wredundant-decls... yes
checking if gcc supports -Wlogical-op... yes
checking if gcc supports -Werror=implicit... yes
checking if gcc supports -Werror=nonnull... yes
checking if gcc supports -Werror=init-self... yes
checking if gcc supports -Werror=main... yes
checking if gcc supports -Werror=missing-braces... yes
checking if gcc supports -Werror=sequence-point... yes
checking if gcc supports -Werror=return-type... yes
checking if gcc supports -Werror=trigraphs... yes
checking if gcc supports -Werror=array-bounds... yes
checking if gcc supports -Werror=write-strings... yes
checking if gcc supports -Werror=address... yes
checking if gcc supports -Werror=int-to-pointer-cast... yes
checking if gcc supports -Werror=pointer-to-int-cast... yes
checking if gcc supports -pedantic... yes
checking if gcc supports -Werror... yes
checking if gcc supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for usleep... yes
checking for XSET... yes
checking for SET_X11... yes
checking for SET_XEXT... yes
checking for X11/extensions/dpms.h... yes
checking for X11/extensions/MITMisc.h... yes
checking for SET_XKB... yes
checking for X11/XKBlib.h... yes
checking for SET_XF86MISC... no
not found
checking for SET_FONTCACHE... no
not found
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
Making all in man
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
  GEN      xset.1
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
  CC       xset.o
  CCLD     xset
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
Making check in man
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[1]: Nothing to be done for 'check'.
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
>>> xset: Entering fakeroot...
Making install in man
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[2]: Nothing to be done for 'install-exec-am'.
 .././install-sh -c -d '/home/buildozer/aports/community/xset/pkg/xset/usr/share/man/man1'
 /usr/bin/install -c -m 644 xset.1 '/home/buildozer/aports/community/xset/pkg/xset/usr/share/man/man1'
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4/man'
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make[2]: Nothing to be done for 'install-data-am'.
 ./install-sh -c -d '/home/buildozer/aports/community/xset/pkg/xset/usr/bin'
  /usr/bin/install -c xset '/home/buildozer/aports/community/xset/pkg/xset/usr/bin'
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.4'
>>> xset-doc*: Running split function doc...
>>> xset-doc*: Preparing subpackage xset-doc...
>>> xset-doc*: Running postcheck for xset-doc
>>> xset*: Running postcheck for xset
>>> xset*: Preparing package xset...
>>> xset*: Stripping binaries
>>> xset-doc*: Scanning shared objects
>>> xset*: Scanning shared objects
>>> xset-doc*: Tracing dependencies...
>>> xset-doc*: Package size: 28.0 KB
>>> xset-doc*: Compressing data...
>>> xset-doc*: Create checksum...
>>> xset-doc*: Create xset-doc-1.2.4-r0.apk
>>> xset*: Tracing dependencies...
	so:libX11.so.6
	so:libXext.so.6
	so:libXmuu.so.1
	so:libc.musl-x86.so.1
>>> xset*: Package size: 44.0 KB
>>> xset*: Compressing data...
>>> xset*: Create checksum...
>>> xset*: Create xset-1.2.4-r0.apk
>>> xset: Build complete at Sat, 22 May 2021 02:49:52 +0000 elapsed time 0h 0m 24s
>>> xset: Cleaning up srcdir
>>> xset: Cleaning up pkgdir
>>> xset: Uninstalling dependencies...
(1/47) Purging .makedepends-xset (20210522.024943)
(2/47) Purging libxmu-dev (1.1.3-r0)
(3/47) Purging util-linux-dev (2.36.2-r2)
(4/47) Purging util-linux-openrc (2.36.2-r2)
(5/47) Purging util-linux (2.36.2-r2)
(6/47) Purging blkid (2.36.2-r2)
(7/47) Purging setpriv (2.36.2-r2)
(8/47) Purging findmnt (2.36.2-r2)
(9/47) Purging mcookie (2.36.2-r2)
(10/47) Purging hexdump (2.36.2-r2)
(11/47) Purging lsblk (2.36.2-r2)
(12/47) Purging sfdisk (2.36.2-r2)
(13/47) Purging cfdisk (2.36.2-r2)
(14/47) Purging partx (2.36.2-r2)
(15/47) Purging flock (2.36.2-r2)
(16/47) Purging logger (2.36.2-r2)
(17/47) Purging uuidgen (2.36.2-r2)
(18/47) Purging libfdisk (2.36.2-r2)
(19/47) Purging libmount (2.36.2-r2)
(20/47) Purging libsmartcols (2.36.2-r2)
(21/47) Purging libxmu (1.1.3-r0)
(22/47) Purging libxext-dev (1.3.4-r0)
(23/47) Purging libxext (1.3.4-r0)
(24/47) Purging util-macros (1.19.3-r0)
(25/47) Purging libblkid (2.36.2-r2)
(26/47) Purging libcap-ng (0.8.2-r0)
(27/47) Purging libxt-dev (1.2.1-r0)
(28/47) Purging libxt (1.2.1-r0)
(29/47) Purging libsm-dev (1.2.3-r0)
(30/47) Purging libsm (1.2.3-r0)
(31/47) Purging libuuid (2.36.2-r2)
(32/47) Purging libeconf (0.3.8-r1)
(33/47) Purging libx11-dev (1.7.1-r0)
(34/47) Purging xtrans (1.4.0-r1)
(35/47) Purging libx11 (1.7.1-r0)
(36/47) Purging libxcb-dev (1.14-r2)
(37/47) Purging xcb-proto (1.14.1-r2)
(38/47) Purging libxcb (1.14-r2)
(39/47) Purging libxau-dev (1.0.9-r0)
(40/47) Purging libxau (1.0.9-r0)
(41/47) Purging libxdmcp-dev (1.1.3-r0)
(42/47) Purging libxdmcp (1.1.3-r0)
(43/47) Purging libbsd (0.11.3-r0)
(44/47) Purging libmd (1.0.3-r0)
(45/47) Purging libice-dev (1.0.10-r0)
(46/47) Purging libice (1.0.10-r0)
(47/47) Purging xorgproto (2021.4-r0)
Executing busybox-1.33.1-r1.trigger
OK: 1013 MiB in 101 packages
>>> xset: Updating the community/x86 repository index...
>>> xset: Signing the index...