>>> py3-shapely: Building community/py3-shapely 1.8.5-r1 (using abuild 3.10.0_rc1-r2) started Wed, 02 Nov 2022 02:32:32 +0000 >>> py3-shapely: Checking sanity of /home/buildozer/aports/community/py3-shapely/APKBUILD... >>> py3-shapely: Analyzing dependencies... >>> py3-shapely: Installing for build: build-base py3-numpy geos-dev py3-matplotlib py3-numpy-dev py3-packaging py3-setuptools python3-dev cython py3-pytest (1/61) Installing libgfortran (12.2.1_git20220924-r3) (2/61) Installing openblas (0.3.21-r0) (3/61) Installing py3-numpy (1.23.4-r0) (4/61) Installing geos (3.11.0-r0) (5/61) Installing geos-dev (3.11.0-r0) (6/61) Installing libxau (1.0.10-r0) (7/61) Installing libmd (1.0.4-r0) (8/61) Installing libbsd (0.11.7-r0) (9/61) Installing libxdmcp (1.1.3-r1) (10/61) Installing libxcb (1.15-r0) (11/61) Installing libx11 (1.8.1-r1) (12/61) Installing libxext (1.3.5-r0) (13/61) Installing libxrender (0.9.11-r0) (14/61) Installing libpng (1.6.38-r0) (15/61) Installing freetype (2.12.1-r0) (16/61) Installing fontconfig (2.14.1-r0) (17/61) Installing pixman (0.42.0-r0) (18/61) Installing cairo (1.17.6-r3) (19/61) Installing py3-cairo (1.21.0-r1) (20/61) Installing libffi (3.4.4-r0) (21/61) Installing gdbm (1.23-r0) (22/61) Installing mpdecimal (2.5.1-r1) (23/61) Installing readline (8.2.0-r0) (24/61) Installing sqlite-libs (3.39.4-r0) (25/61) Installing python3 (3.10.8-r3) (26/61) Installing py3-certifi (2022.9.24-r0) (27/61) Installing py3-cycler (0.11.0-r0) (28/61) Installing py3-six (1.16.0-r3) (29/61) Installing py3-dateutil (2.8.2-r1) (30/61) Installing py3-fonttools (4.38.0-r0) (31/61) Installing py3-kiwisolver (1.2.0-r3) (32/61) Installing py3-parsing (3.0.9-r0) (33/61) Installing py3-packaging (21.3-r2) (34/61) Installing py3-olefile (0.46-r6) (35/61) Installing libimagequant (4.0.4-r0) (36/61) Installing libjpeg-turbo (2.1.4-r0) (37/61) Installing lcms2 (2.13.1-r0) (38/61) Installing openjpeg (2.5.0-r0) (39/61) Installing libwebp (1.2.4-r1) (40/61) Installing tiff (4.4.0-r1) (41/61) Installing py3-pillow (9.3.0-r0) (42/61) Installing py3-tz (2022.6-r0) (43/61) Installing tzdata (2022f-r0) (44/61) Installing tcl (8.6.12-r1) (45/61) Installing libxft (2.3.6-r0) (46/61) Installing tk (8.6.12-r1) (47/61) Installing python3-tkinter (3.10.8-r1) (48/61) Installing py3-contourpy (1.0.6-r0) (49/61) Installing qhull (2020.2-r2) (50/61) Installing py3-matplotlib (3.6.1-r0) (51/61) Installing py3-numpy-dev (1.23.4-r0) (52/61) Installing py3-setuptools (65.5.0-r0) (53/61) Installing python3-dev (3.10.8-r3) (54/61) Installing cython (0.29.32-r0) (55/61) Installing py3-attrs (22.1.0-r0) (56/61) Installing py3-iniconfig (1.1.1-r3) (57/61) Installing py3-pluggy (1.0.0-r1) (58/61) Installing py3-py (1.11.0-r0) (59/61) Installing py3-tomli (2.0.1-r1) (60/61) Installing py3-pytest (7.1.3-r1) (61/61) Installing .makedepends-py3-shapely (20221102.023233) Executing busybox-1.35.0-r27.trigger OK: 443 MiB in 158 packages >>> py3-shapely: Cleaning up srcdir >>> py3-shapely: Cleaning up pkgdir >>> py3-shapely: Fetching https://distfiles.alpinelinux.org/distfiles/v3.17/Shapely-1.8.5.tar.gz >>> py3-shapely: Fetching https://distfiles.alpinelinux.org/distfiles/v3.17/Shapely-1.8.5.tar.gz >>> py3-shapely: Checking sha512sums... Shapely-1.8.5.tar.gz: OK 10-packaging.patch: OK >>> py3-shapely: Unpacking /var/cache/distfiles/v3.17/Shapely-1.8.5.tar.gz... >>> py3-shapely: 10-packaging.patch patching file setup.py Hunk #1 succeeded at 67 with fuzz 2 (offset -6 lines). running build running build_py creating build creating build/lib.linux-armv8l-cpython-310 creating build/lib.linux-armv8l-cpython-310/shapely copying shapely/topology.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/ops.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/errors.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/_buildcfg.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/wkt.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/geos.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/strtree.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/predicates.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/ctypes_declarations.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/validation.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/wkb.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/linref.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/prepared.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/impl.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/coords.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/iterops.py -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/affinity.py -> build/lib.linux-armv8l-cpython-310/shapely creating build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/geo.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/multipoint.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/proxy.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/base.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/polygon.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/linestring.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/point.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/collection.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/multilinestring.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/multipolygon.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry copying shapely/geometry/conftest.py -> build/lib.linux-armv8l-cpython-310/shapely/geometry creating build/lib.linux-armv8l-cpython-310/shapely/algorithms copying shapely/algorithms/polylabel.py -> build/lib.linux-armv8l-cpython-310/shapely/algorithms copying shapely/algorithms/cga.py -> build/lib.linux-armv8l-cpython-310/shapely/algorithms copying shapely/algorithms/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely/algorithms creating build/lib.linux-armv8l-cpython-310/shapely/examples copying shapely/examples/geoms.py -> build/lib.linux-armv8l-cpython-310/shapely/examples copying shapely/examples/dissolve.py -> build/lib.linux-armv8l-cpython-310/shapely/examples copying shapely/examples/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely/examples copying shapely/examples/intersect.py -> build/lib.linux-armv8l-cpython-310/shapely/examples creating build/lib.linux-armv8l-cpython-310/shapely/speedups copying shapely/speedups/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely/speedups creating build/lib.linux-armv8l-cpython-310/shapely/vectorized copying shapely/vectorized/__init__.py -> build/lib.linux-armv8l-cpython-310/shapely/vectorized running egg_info writing Shapely.egg-info/PKG-INFO writing dependency_links to Shapely.egg-info/dependency_links.txt writing requirements to Shapely.egg-info/requires.txt writing top-level names to Shapely.egg-info/top_level.txt reading manifest file 'Shapely.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'Shapely.egg-info/SOURCES.txt' copying shapely/_geos.pxi -> build/lib.linux-armv8l-cpython-310/shapely copying shapely/speedups/_speedups.c -> build/lib.linux-armv8l-cpython-310/shapely/speedups copying shapely/speedups/_speedups.pyx -> build/lib.linux-armv8l-cpython-310/shapely/speedups copying shapely/vectorized/_vectorized.pyx -> build/lib.linux-armv8l-cpython-310/shapely/vectorized running build_ext skipping 'shapely/vectorized/_vectorized.c' Cython extension (up-to-date) building 'shapely.speedups._speedups' extension creating build/temp.linux-armv8l-cpython-310 creating build/temp.linux-armv8l-cpython-310/shapely creating build/temp.linux-armv8l-cpython-310/shapely/speedups gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -DTHREAD_STACK_SIZE=0x100000 -Os -fomit-frame-pointer -Os -fomit-frame-pointer -fPIC -I/usr/include -I/usr/lib/python3.10/site-packages/numpy/core/include -I/usr/include/python3.10 -c shapely/speedups/_speedups.c -o build/temp.linux-armv8l-cpython-310/shapely/speedups/_speedups.o shapely/speedups/_speedups.c: In function '__pyx_pf_7shapely_8speedups_9_speedups_6geos_linearring_from_py': shapely/speedups/_speedups.c:5405:39: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 5405 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_14; __pyx_t_12+=1) { | ^ shapely/speedups/_speedups.c:5517:31: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 5517 | __pyx_t_5 = ((__pyx_v_M > __pyx_v_m) != 0); | ^ shapely/speedups/_speedups.c:6105:39: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 6105 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_14; __pyx_t_12+=1) { | ^ shapely/speedups/_speedups.c:6324:31: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 6324 | __pyx_t_4 = ((__pyx_v_M > __pyx_v_m) != 0); | ^ shapely/speedups/_speedups.c: In function '__pyx_f_7shapely_8speedups_9_speedups_transform': shapely/speedups/_speedups.c:7572:35: warning: comparison of integer expressions of different signedness: 'long int' and 'unsigned int' [-Wsign-compare] 7572 | for (__pyx_t_7 = 0; __pyx_t_7 < __pyx_t_6; __pyx_t_7+=1) { | ^ shapely/speedups/_speedups.c:7658:35: warning: comparison of integer expressions of different signedness: 'long int' and 'unsigned int' [-Wsign-compare] 7658 | for (__pyx_t_7 = 0; __pyx_t_7 < __pyx_t_6; __pyx_t_7+=1) { | ^ shapely/speedups/_speedups.c: At top level: shapely/speedups/_speedups.c:1966:30: warning: '__pyx_f_7shapely_8speedups_9_speedups_geos_from_prepared' defined but not used [-Wunused-function] 1966 | static GEOSPreparedGeometry *__pyx_f_7shapely_8speedups_9_speedups_geos_from_prepared(PyObject *__pyx_v_shapely_geom) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c:1880:28: warning: '__pyx_f_7shapely_8speedups_9_speedups_get_geos_context_handle' defined but not used [-Wunused-function] 1880 | static GEOSContextHandle_t __pyx_f_7shapely_8speedups_9_speedups_get_geos_context_handle(void) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function '__pyx_pf_7shapely_8speedups_9_speedups_8coordseq_ctypes', inlined from '__pyx_pw_7shapely_8speedups_9_speedups_9coordseq_ctypes' at shapely/speedups/_speedups.c:6719:13: shapely/speedups/_speedups.c:7062:14: warning: '__pyx_v_cs' may be used uninitialized [-Wmaybe-uninitialized] 7062 | (void)(GEOSCoordSeq_getZ_r(__pyx_v_handle, __pyx_v_cs, __pyx_v_i, (&__pyx_v_temp))); | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c: In function '__pyx_pw_7shapely_8speedups_9_speedups_9coordseq_ctypes': shapely/speedups/_speedups.c:6732:22: note: '__pyx_v_cs' was declared here 6732 | GEOSCoordSequence *__pyx_v_cs; | ^~~~~~~~~~ shapely/speedups/_speedups.c: In function '__pyx_f_7shapely_8speedups_9_speedups_affine_transform.constprop': shapely/speedups/_speedups.c:8558:17: warning: '__pyx_v_the_geom_t' may be used uninitialized [-Wmaybe-uninitialized] 8558 | __pyx_t_1 = __Pyx_PyInt_FromSize_t(((uintptr_t)__pyx_v_the_geom_t)); if (unlikely(!__pyx_t_1)) __PYX_ERR(0, 568, __pyx_L1_error) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c:7808:17: note: '__pyx_v_the_geom_t' was declared here 7808 | GEOSGeometry *__pyx_v_the_geom_t; | ^~~~~~~~~~~~~~~~~~ warning: no library file corresponding to '/usr/lib/python3.10/site-packages/numpy/core/include' found (skipping) gcc -shared -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Os -fomit-frame-pointer -Os -fomit-frame-pointer build/temp.linux-armv8l-cpython-310/shapely/speedups/_speedups.o -L/usr/lib -L/usr/lib -lgeos_c -o build/lib.linux-armv8l-cpython-310/shapely/speedups/_speedups.cpython-310-arm-linux-gnueabihf.so building 'shapely.vectorized._vectorized' extension creating build/temp.linux-armv8l-cpython-310/shapely/vectorized gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -DTHREAD_STACK_SIZE=0x100000 -Os -fomit-frame-pointer -Os -fomit-frame-pointer -fPIC -I/usr/include -I/usr/lib/python3.10/site-packages/numpy/core/include -I/usr/include/python3.10 -c shapely/vectorized/_vectorized.c -o build/temp.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.o In file included from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/ndarraytypes.h:1948, from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/ndarrayobject.h:12, from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/arrayobject.h:5, from shapely/vectorized/_vectorized.c:746: /usr/lib/python3.10/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:17:2: warning: #warning "Using deprecated NumPy API, disable it with " "#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] 17 | #warning "Using deprecated NumPy API, disable it with " \ | ^~~~~~~ shapely/vectorized/_vectorized.c: In function '__pyx_f_7shapely_10vectorized_11_vectorized__predicated_1d': shapely/vectorized/_vectorized.c:3799:41: warning: comparison of integer expressions of different signedness: 'Py_ssize_t' {aka 'int'} and 'unsigned int' [-Wsign-compare] 3799 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_11; __pyx_t_12+=1) { | ^ warning: no library file corresponding to '/usr/lib/python3.10/site-packages/numpy/core/include' found (skipping) gcc -shared -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Os -fomit-frame-pointer -Os -fomit-frame-pointer build/temp.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.o -L/usr/lib -L/usr/lib -lgeos_c -o build/lib.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.cpython-310-arm-linux-gnueabihf.so running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. running egg_info writing Shapely.egg-info/PKG-INFO writing dependency_links to Shapely.egg-info/dependency_links.txt writing requirements to Shapely.egg-info/requires.txt writing top-level names to Shapely.egg-info/top_level.txt reading manifest file 'Shapely.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'Shapely.egg-info/SOURCES.txt' running build_ext skipping 'shapely/vectorized/_vectorized.c' Cython extension (up-to-date) building 'shapely.speedups._speedups' extension gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -DTHREAD_STACK_SIZE=0x100000 -Os -fomit-frame-pointer -Os -fomit-frame-pointer -fPIC -I/usr/include -I/usr/lib/python3.10/site-packages/numpy/core/include -I/usr/include/python3.10 -c shapely/speedups/_speedups.c -o build/temp.linux-armv8l-cpython-310/shapely/speedups/_speedups.o shapely/speedups/_speedups.c: In function '__pyx_pf_7shapely_8speedups_9_speedups_6geos_linearring_from_py': shapely/speedups/_speedups.c:5405:39: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 5405 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_14; __pyx_t_12+=1) { | ^ shapely/speedups/_speedups.c:5517:31: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 5517 | __pyx_t_5 = ((__pyx_v_M > __pyx_v_m) != 0); | ^ shapely/speedups/_speedups.c:6105:39: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 6105 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_14; __pyx_t_12+=1) { | ^ shapely/speedups/_speedups.c:6324:31: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare] 6324 | __pyx_t_4 = ((__pyx_v_M > __pyx_v_m) != 0); | ^ shapely/speedups/_speedups.c: In function '__pyx_f_7shapely_8speedups_9_speedups_transform': shapely/speedups/_speedups.c:7572:35: warning: comparison of integer expressions of different signedness: 'long int' and 'unsigned int' [-Wsign-compare] 7572 | for (__pyx_t_7 = 0; __pyx_t_7 < __pyx_t_6; __pyx_t_7+=1) { | ^ shapely/speedups/_speedups.c:7658:35: warning: comparison of integer expressions of different signedness: 'long int' and 'unsigned int' [-Wsign-compare] 7658 | for (__pyx_t_7 = 0; __pyx_t_7 < __pyx_t_6; __pyx_t_7+=1) { | ^ shapely/speedups/_speedups.c: At top level: shapely/speedups/_speedups.c:1966:30: warning: '__pyx_f_7shapely_8speedups_9_speedups_geos_from_prepared' defined but not used [-Wunused-function] 1966 | static GEOSPreparedGeometry *__pyx_f_7shapely_8speedups_9_speedups_geos_from_prepared(PyObject *__pyx_v_shapely_geom) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c:1880:28: warning: '__pyx_f_7shapely_8speedups_9_speedups_get_geos_context_handle' defined but not used [-Wunused-function] 1880 | static GEOSContextHandle_t __pyx_f_7shapely_8speedups_9_speedups_get_geos_context_handle(void) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function '__pyx_pf_7shapely_8speedups_9_speedups_8coordseq_ctypes', inlined from '__pyx_pw_7shapely_8speedups_9_speedups_9coordseq_ctypes' at shapely/speedups/_speedups.c:6719:13: shapely/speedups/_speedups.c:7062:14: warning: '__pyx_v_cs' may be used uninitialized [-Wmaybe-uninitialized] 7062 | (void)(GEOSCoordSeq_getZ_r(__pyx_v_handle, __pyx_v_cs, __pyx_v_i, (&__pyx_v_temp))); | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c: In function '__pyx_pw_7shapely_8speedups_9_speedups_9coordseq_ctypes': shapely/speedups/_speedups.c:6732:22: note: '__pyx_v_cs' was declared here 6732 | GEOSCoordSequence *__pyx_v_cs; | ^~~~~~~~~~ shapely/speedups/_speedups.c: In function '__pyx_f_7shapely_8speedups_9_speedups_affine_transform.constprop': shapely/speedups/_speedups.c:8558:17: warning: '__pyx_v_the_geom_t' may be used uninitialized [-Wmaybe-uninitialized] 8558 | __pyx_t_1 = __Pyx_PyInt_FromSize_t(((uintptr_t)__pyx_v_the_geom_t)); if (unlikely(!__pyx_t_1)) __PYX_ERR(0, 568, __pyx_L1_error) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ shapely/speedups/_speedups.c:7808:17: note: '__pyx_v_the_geom_t' was declared here 7808 | GEOSGeometry *__pyx_v_the_geom_t; | ^~~~~~~~~~~~~~~~~~ warning: no library file corresponding to '/usr/lib/python3.10/site-packages/numpy/core/include' found (skipping) gcc -shared -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Os -fomit-frame-pointer -Os -fomit-frame-pointer build/temp.linux-armv8l-cpython-310/shapely/speedups/_speedups.o -L/usr/lib -L/usr/lib -lgeos_c -o /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/speedups/_speedups.cpython-310-arm-linux-gnueabihf.so building 'shapely.vectorized._vectorized' extension gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -Os -fomit-frame-pointer -g -O2 -DTHREAD_STACK_SIZE=0x100000 -Os -fomit-frame-pointer -Os -fomit-frame-pointer -fPIC -I/usr/include -I/usr/lib/python3.10/site-packages/numpy/core/include -I/usr/include/python3.10 -c shapely/vectorized/_vectorized.c -o build/temp.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.o In file included from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/ndarraytypes.h:1948, from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/ndarrayobject.h:12, from /usr/lib/python3.10/site-packages/numpy/core/include/numpy/arrayobject.h:5, from shapely/vectorized/_vectorized.c:746: /usr/lib/python3.10/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:17:2: warning: #warning "Using deprecated NumPy API, disable it with " "#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] 17 | #warning "Using deprecated NumPy API, disable it with " \ | ^~~~~~~ shapely/vectorized/_vectorized.c: In function '__pyx_f_7shapely_10vectorized_11_vectorized__predicated_1d': shapely/vectorized/_vectorized.c:3799:41: warning: comparison of integer expressions of different signedness: 'Py_ssize_t' {aka 'int'} and 'unsigned int' [-Wsign-compare] 3799 | for (__pyx_t_12 = 0; __pyx_t_12 < __pyx_t_11; __pyx_t_12+=1) { | ^ warning: no library file corresponding to '/usr/lib/python3.10/site-packages/numpy/core/include' found (skipping) gcc -shared -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Os -fomit-frame-pointer -Os -fomit-frame-pointer build/temp.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.o -L/usr/lib -L/usr/lib -lgeos_c -o /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/vectorized/_vectorized.cpython-310-arm-linux-gnueabihf.so test_line1_interpolate (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_line1_project (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_line2_interpolate (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_line2_project (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_line_ends_interpolate (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_multiline_interpolate (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_multiline_project (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_not_on_line_project (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_not_supported_project (tests.test_linear_referencing.LinearReferencingTestCase) ... ok test_shared_paths_forward (tests.test_shared_paths.SharedPaths) ... ok test_shared_paths_forward2 (tests.test_shared_paths.SharedPaths) ... ok test_wrong_type (tests.test_shared_paths.SharedPaths) ... ok test_empty (tests.test_transform.IdentityTestCase) ... ok test_line (tests.test_transform.IdentityTestCase) ... ok test_linearring (tests.test_transform.IdentityTestCase) ... ok test_multipolygon (tests.test_transform.IdentityTestCase) ... ok test_point (tests.test_transform.IdentityTestCase) ... ok test_polygon (tests.test_transform.IdentityTestCase) ... ok test_line (tests.test_transform.LambdaTestCase) ... ok test_multipolygon (tests.test_transform.LambdaTestCase) ... ok test_point (tests.test_transform.LambdaTestCase) ... ok test_polygon (tests.test_transform.LambdaTestCase) ... ok test_geointerface (tests.test_geointerface.GeoInterfaceTestCase) ... ok test_geointerface_adapter (tests.test_geointerface.GeoInterfaceTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:25: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPoint()' or 'PointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Point()' constructor instead. shape = asShape(d) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:32: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPoint()' or 'PointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Point()' constructor instead. shape = asShape(thing) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:37: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asLineString()' or 'LineStringAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'LineString()' constructor instead. shape = asShape( /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:43: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPolygon()' or 'PolygonAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Polygon()' constructor instead. shape = asShape( /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:56: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiPoint()' or 'MultiPointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiPoint()' constructor instead. shape = asShape({'type': 'MultiPoint', /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:62: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiLineString()' or 'MultiLineStringAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiLineString()' constructor instead. shape = asShape({'type': 'MultiLineString', /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_geointerface.py:68: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiPolygon()' or 'MultiPolygonAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiPolygon()' constructor instead. shape = asShape( ok test_line_intersection (tests.test_products_z.ProductZTestCase) ... ok test_multipolygon (tests.test_multipolygon.MultiPolygonTestCase) ... ok test_multipolygon_adapter (tests.test_multipolygon.MultiPolygonTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_multipolygon.py:71: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiPolygon()' or 'MultiPolygonAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiPolygon()' constructor instead. mpa = asMultiPolygon([(coords, holes_coords)]) ok test_subgeom_access (tests.test_multipolygon.MultiPolygonTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_multi.py:8: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertEqual(geom[t(i)], geoms[i]) ok test_arrays (tests.test_xy.XYTestCase) ... ok test_digenerate (tests.test_minimum_rotated_rectangle.MinimumRotatedRectangleTestCase) ... ok test_minimum_rectangle (tests.test_minimum_rotated_rectangle.MinimumRotatedRectangleTestCase) ... ok test_create_multi_with_empty_component (tests.test_multipoint.MultiPointTestCase) ... ok test_multipoint (tests.test_multipoint.MultiPointTestCase) ... ok test_multipoint_adapter (tests.test_multipoint.MultiPointTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiPoint()' or 'MultiPointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiPoint()' constructor instead. method() ok test_multipoint_from_numpy (tests.test_multipoint.MultiPointTestCase) ... ok test_numpy (tests.test_multipoint.MultiPointTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The array interface is deprecated and will no longer work in Shapely 2.0. Convert the '.coords' to a numpy array instead. method() ok test_numpy_adapter (tests.test_multipoint.MultiPointTestCase) ... ok test_subgeom_access (tests.test_multipoint.MultiPointTestCase) ... ok test_ccw (tests.test_box.BoxTestCase) ... ok test_ccw_default (tests.test_box.BoxTestCase) ... ok test_cw (tests.test_box.BoxTestCase) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitClosedRing) ... ok test_split_closed_ring_with_point (tests.test_split.TestSplitClosedRing) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitGeometry) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitLine) ... ok test_split_line_with_line (tests.test_split.TestSplitLine) ... ok test_split_line_with_multiline (tests.test_split.TestSplitLine) ... ok test_split_line_with_multipoint (tests.test_split.TestSplitLine) ... ok test_split_line_with_multipolygon (tests.test_split.TestSplitLine) ... ok test_split_line_with_point (tests.test_split.TestSplitLine) ... ok test_split_line_with_polygon (tests.test_split.TestSplitLine) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitMulti) ... ok test_split_multiline_with_multipoint (tests.test_split.TestSplitMulti) ... ok test_split_multiline_with_point (tests.test_split.TestSplitMulti) ... ok test_split_multipolygon_with_line (tests.test_split.TestSplitMulti) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitPolygon) ... ok test_split_poly_with_line (tests.test_split.TestSplitPolygon) ... ok test_split_poly_with_multipoint (tests.test_split.TestSplitPolygon) ... ok test_split_poly_with_point (tests.test_split.TestSplitPolygon) ... ok test_split_poly_with_poly (tests.test_split.TestSplitPolygon) ... ok test_holes (tests.test_cga.PolygonOrienterTestCase) ... ok test_no_holes (tests.test_cga.PolygonOrienterTestCase) ... ok test_ccw (tests.test_cga.RingOrientationTestCase) ... ok test_cw (tests.test_cga.RingOrientationTestCase) ... ok test_defaultimpl (tests.test_delegated.WrapperTestCase) ... ok test_delegated (tests.test_delegated.WrapperTestCase) ... ok test_linestring (tests.test_ndarrays.TransposeTestCase) ... ok test_linestring_adapter (tests.test_ndarrays.TransposeTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asLineString()' or 'LineStringAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'LineString()' constructor instead. method() ok test_multipoint (tests.test_ndarrays.TransposeTestCase) ... ok test_multipoint_adapter (tests.test_ndarrays.TransposeTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiPoint()' or 'MultiPointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiPoint()' constructor instead. method() ok test_polygon (tests.test_ndarrays.TransposeTestCase) ... ok test_polygon_adapter (tests.test_ndarrays.TransposeTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPolygon()' or 'PolygonAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Polygon()' constructor instead. method() ok test_linemerge (tests.test_linemerge.LineMergeTestCase) ... ok test_snap (tests.test_snap.Snap) ... ok test_polygonize (tests.test_polygonize.PolygonizeTestCase) ... ok test_polygonize_full (tests.test_polygonize.PolygonizeTestCase) ... ok test_cascaded_union (tests.test_union.UnionTestCase) ... ok test_unary_union (tests.test_union.UnionTestCase) ... ok test_unary_union_multi (tests.test_union.UnionTestCase) ... ok test_empty_base (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_class (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_geometry_collection (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_linear_ring (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_linestring (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_multilinestring (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_multipoint (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_multipolygon (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_point (tests.test_emptiness.EmptinessTestCase) ... ok test_empty_polygon (tests.test_emptiness.EmptinessTestCase) ... ok test_emptying_point (tests.test_emptiness.EmptinessTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_emptiness.py:29: ShapelyDeprecationWarning: The 'empty()' method is deprecated and will be removed in Shapely 2.0 p.empty() ok test_none_geom (tests.test_emptiness.EmptinessTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/geometry/base.py:250: ShapelyDeprecationWarning: Setting the '_geom' attribute directly is deprecated, and will no longer be possible in Shapely 2.0. super().__setattr__(name, value) ok test_valid (tests.test_validation.ValidationTestCase) ... ok test_fallbacks (tests.test_dlls.LoadingTestCase) ... ok test_load (tests.test_dlls.LoadingTestCase) ... ok test_array_2d (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_array_dtype (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_contains_linestring (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_contains_multipoly (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_contains_point (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_contains_poly (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_shapely_xy_attr_contains (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_x_array_order (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_xy_array_order (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_y_array_order (tests.test_vectorized.VectorizedContainsTestCase) ... ok test_touches (tests.test_vectorized.VectorizedTouchesTestCase) ... ok test_collection (tests.test_svg.SvgTestCase) ... INFO:shapely.geos:Too few points in geometry component at or near point 4 2 INFO:shapely.geos:Too few points in geometry component at or near point 4 2 ok test_linestring (tests.test_svg.SvgTestCase) ... INFO:shapely.geos:Too few points in geometry component at or near point 0 0 INFO:shapely.geos:Too few points in geometry component at or near point 0 0 ok test_multilinestring (tests.test_svg.SvgTestCase) ... INFO:shapely.geos:Too few points in geometry component at or near point 2 3 INFO:shapely.geos:Too few points in geometry component at or near point 2 3 ok test_multipoint (tests.test_svg.SvgTestCase) ... ok test_multipolygon (tests.test_svg.SvgTestCase) ... INFO:shapely.geos:Self-intersection at or near point 20 20 INFO:shapely.geos:Self-intersection at or near point 20 20 ok test_point (tests.test_svg.SvgTestCase) ... ok test_polygon (tests.test_svg.SvgTestCase) ... INFO:shapely.geos:Self-intersection at or near point 20 20 INFO:shapely.geos:Self-intersection at or near point 20 20 ok test_attribute_chains (tests.test_polygon.PolygonTestCase) ... ok test_dimensions (tests.test_polygon.PolygonTestCase) ... ok test_empty_equality (tests.test_polygon.PolygonTestCase) ... ok test_empty_polygon_exterior (tests.test_polygon.PolygonTestCase) ... ok test_from_bounds (tests.test_polygon.PolygonTestCase) ... ok test_linearring (tests.test_polygon.PolygonTestCase) ... ok test_linearring_adapter (tests.test_polygon.PolygonTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_polygon.py:233: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asLinearRing()' or 'LinearRingAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'LinearRing()' constructor instead. ra = asLinearRing(coords) ok test_linearring_empty (tests.test_polygon.PolygonTestCase) ... ok test_linearring_empty_mutate (tests.test_polygon.PolygonTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/geometry/base.py:250: ShapelyDeprecationWarning: Setting the 'coords' to mutate a Geometry in place is deprecated, and will not be possible any more in Shapely 2.0 super().__setattr__(name, value) ok test_linearring_mutate (tests.test_polygon.PolygonTestCase) ... ok test_polygon (tests.test_polygon.PolygonTestCase) ... ok test_polygon_adapter (tests.test_polygon.PolygonTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPolygon()' or 'PolygonAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Polygon()' constructor instead. method() ok test_polygon_exterior_array_interface (tests.test_polygon.PolygonTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The array interface is deprecated and will no longer work in Shapely 2.0. Convert the '.coords' to a numpy array instead. method() ok test_parallel_offset_linear_ring (tests.test_parallel_offset.OperationsTestCase) ... ok test_parallel_offset_linestring (tests.test_parallel_offset.OperationsTestCase) ... ok test_affine_2d (tests.test_affinity.AffineTestCase) ... ok test_affine_3d (tests.test_affinity.AffineTestCase) ... ok test_affine_geom_types (tests.test_affinity.AffineTestCase) ... ok test_affine_params (tests.test_affinity.AffineTestCase) ... ok test_rotate (tests.test_affinity.TransformOpsTestCase) ... ok test_rotate_angle_array (tests.test_affinity.TransformOpsTestCase) ... ok test_rotate_empty (tests.test_affinity.TransformOpsTestCase) ... ok test_scale (tests.test_affinity.TransformOpsTestCase) ... ok test_scale_empty (tests.test_affinity.TransformOpsTestCase) ... ok test_skew (tests.test_affinity.TransformOpsTestCase) ... ok test_skew_empty (tests.test_affinity.TransformOpsTestCase) ... ok test_skew_xs_ys_array (tests.test_affinity.TransformOpsTestCase) ... ok test_translate (tests.test_affinity.TransformOpsTestCase) ... ok test_translate_empty (tests.test_affinity.TransformOpsTestCase) ... ok test_nearest (tests.test_nearest.Nearest) ... ok test_empty_polygon (tests.test_mapping.MappingTestCase) Empty polygons will round trip without error ... ok test_point (tests.test_mapping.MappingTestCase) ... ok test_array_interface (tests.test_geomseq.MultiLineTestCase) ... ok test_data_destriding (tests.test_coords.CoordsTestCase) ... ok test_data_promotion (tests.test_coords.CoordsTestCase) ... ok test_raise_type_error (tests.test_substring.SubstringTestCase) ... ok test_return_endpoint (tests.test_substring.SubstringTestCase) ... ok test_return_endsubstring (tests.test_substring.SubstringTestCase) ... ok test_return_endsubstring_reversed (tests.test_substring.SubstringTestCase) ... ok test_return_midpoint (tests.test_substring.SubstringTestCase) ... ok test_return_midsubstring (tests.test_substring.SubstringTestCase) ... ok test_return_midsubstring_reversed (tests.test_substring.SubstringTestCase) ... ok test_return_startpoint (tests.test_substring.SubstringTestCase) ... ok test_return_startsubstring (tests.test_substring.SubstringTestCase) ... ok test_return_startsubstring_reversed (tests.test_substring.SubstringTestCase) ... ok test_return_substring_issue682 (tests.test_substring.SubstringTestCase) ... ok test_return_substring_issue848 (tests.test_substring.SubstringTestCase) ... ok test_return_substring_with_vertices (tests.test_substring.SubstringTestCase) ... ok test_polygon_3 (tests.test_singularity.PolygonTestCase) ... ok test_polygon_5 (tests.test_singularity.PolygonTestCase) ... ok test_wkt_locale (tests.test_locale.LocaleTestCase) ... ok test_cell_sorting (tests.test_polylabel.PolylabelTestCase) Tests rich comparison operators of Cells for use in the polylabel ... ok test_concave_polygon (tests.test_polylabel.PolylabelTestCase) Finds pole of inaccessibility for a concave polygon and ensures that ... ok test_invalid_polygon (tests.test_polylabel.PolylabelTestCase) Makes sure that the polylabel function throws an exception when provided ... INFO:shapely.geos:Ring Self-intersection at or near point 10 10 ok test_polygon_with_hole (tests.test_polylabel.PolylabelTestCase) Finds pole of inaccessibility for a polygon with a hole ... ok test_polylabel (tests.test_polylabel.PolylabelTestCase) Finds pole of inaccessibility for a polygon with a tolerance of 10 ... ok test_rectangle_special_case (tests.test_polylabel.PolylabelTestCase) The centroid algorithm used is vulnerable to floating point errors ... ok test_binary_predicate_exceptions (tests.test_predicates.PredicatesTestCase) ... ERROR:shapely.geos:TopologyException: side location conflict at 459 346. This can occur if the input geometry is invalid. INFO:shapely.geos:Self-intersection at or near point 379.33333333333331 299.66666666666669 ok test_binary_predicates (tests.test_predicates.PredicatesTestCase) ... ok test_relate_pattern (tests.test_predicates.PredicatesTestCase) ... ERROR:shapely.geos:IllegalArgumentException: IllegalArgumentException: Should be length 9, is [fail] instead ok test_unary_predicates (tests.test_predicates.PredicatesTestCase) ... ok test_pickle (tests.test_persist.PersistTestCase) ... ok test_wkb (tests.test_persist.PersistTestCase) ... ok test_wkb_dumps_endianness (tests.test_persist.PersistTestCase) ... ok test_wkt (tests.test_persist.PersistTestCase) ... ok test_empty (tests.test_buffer.BufferSingleSidedCase) ... ok test_line (tests.test_buffer.BufferSingleSidedCase) ... ok test_line_single_sideded_left (tests.test_buffer.BufferSingleSidedCase) ... ok test_line_single_sideded_right (tests.test_buffer.BufferSingleSidedCase) ... ok test_point (tests.test_buffer.BufferSingleSidedCase) ... ok test_point_single_sidedd (tests.test_buffer.BufferSingleSidedCase) ... ok test_polygon (tests.test_buffer.BufferSingleSidedCase) ... ok test_polygon_single_sideded (tests.test_buffer.BufferSingleSidedCase) ... ok test_index_2d_coords (tests.test_getitem.CoordsGetItemTestCase) ... ok test_index_3d_coords (tests.test_getitem.CoordsGetItemTestCase) ... ok test_index_coords_misc (tests.test_getitem.CoordsGetItemTestCase) ... ok test_slice_2d_coords (tests.test_getitem.CoordsGetItemTestCase) ... ok test_slice_3d_coords (tests.test_getitem.CoordsGetItemTestCase) ... ok test_index_linearring (tests.test_getitem.LinearRingGetItemTestCase) ... ok test_index_linearring_misc (tests.test_getitem.LinearRingGetItemTestCase) ... ok test_slice_linearring (tests.test_getitem.LinearRingGetItemTestCase) ... ok test_index_multigeom (tests.test_getitem.MultiGeomGetItemTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:56: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertTrue(g[i].equals(geometry.Point(c[i]))) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:57: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertRaises(IndexError, lambda: g[4]) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:58: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertRaises(IndexError, lambda: g[-5]) ok test_index_multigeom_misc (tests.test_getitem.MultiGeomGetItemTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:63: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertRaises(IndexError, lambda: g[0]) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:64: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertRaises(TypeError, lambda: g[0.0]) ok test_slice_multigeom (tests.test_getitem.MultiGeomGetItemTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:70: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertEqual(type(g[:]), type(g)) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:71: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertEqual(len(g[:]), len(g)) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:71: ShapelyDeprecationWarning: __len__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Check the length of the `geoms` property instead to get the number of parts of a multi-part geometry. self.assertEqual(len(g[:]), len(g)) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:72: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertTrue(g[1:].equals(geometry.MultiPoint(c[1:]))) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:73: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertTrue(g[:-1].equals(geometry.MultiPoint(c[:-1]))) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:74: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertTrue(g[::-1].equals(geometry.MultiPoint(c[::-1]))) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_getitem.py:75: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertTrue(g[4:].is_empty) ok test_create_multi_with_empty_component (tests.test_multilinestring.MultiLineStringTestCase) ... ok test_from_multilinestring_z (tests.test_multilinestring.MultiLineStringTestCase) ... ok test_multilinestring (tests.test_multilinestring.MultiLineStringTestCase) ... ok test_numpy (tests.test_multilinestring.MultiLineStringTestCase) ... ok test_numpy_adapter (tests.test_multilinestring.MultiLineStringTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asMultiLineString()' or 'MultiLineStringAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'MultiLineString()' constructor instead. method() ok test_subgeom_access (tests.test_multilinestring.MultiLineStringTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_multi.py:8: ShapelyDeprecationWarning: __getitem__ for multi-part geometries is deprecated and will be removed in Shapely 2.0. Use the `geoms` property to access the constituent parts of a multi-part geometry. self.assertEqual(geom[t(i)], geoms[i]) ok test_linestring (tests.test_operators.OperatorsTestCase) ... ok test_multipoint (tests.test_operators.OperatorsTestCase) ... ok test_point (tests.test_operators.OperatorsTestCase) ... ok test_polygon (tests.test_operators.OperatorsTestCase) ... ok test_hausdorff_distance (tests.test_operations.OperationsTestCase) ... ok test_interpolate (tests.test_operations.OperationsTestCase) ... ok test_normalize (tests.test_operations.OperationsTestCase) ... ok test_operations (tests.test_operations.OperationsTestCase) ... ok test_relate (tests.test_operations.OperationsTestCase) ... INFO:shapely.geos:Self-intersection at or near point 80 60 ERROR:shapely.geos:TopologyException: side location conflict at 60 60. This can occur if the input geometry is invalid. ok test_err (tests.test_iterops.IterOpsTestCase) ... INFO:shapely.geos:Self-intersection at or near point 0.5 0.5 /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:59: ShapelyDeprecationWarning: The 'intersects' function is deprecated and will be removed in Shapely 2.0 all([isinstance(x, Polygon) ok test_iterops (tests.test_iterops.IterOpsTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:23: ShapelyDeprecationWarning: The 'contains' function is deprecated and will be removed in Shapely 2.0 all([isinstance(x, Point) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:28: ShapelyDeprecationWarning: The 'contains' function is deprecated and will be removed in Shapely 2.0 all([isinstance(x, Point) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:33: ShapelyDeprecationWarning: The 'contains' function is deprecated and will be removed in Shapely 2.0 all([isinstance(x, Point) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:39: ShapelyDeprecationWarning: The 'contains' function is deprecated and will be removed in Shapely 2.0 list(iterops.contains(polygon, [(p, p.coords[:]) /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:46: ShapelyDeprecationWarning: The 'contains' function is deprecated and will be removed in Shapely 2.0 list(iterops.contains(polygon, iter((p, p.coords[:]) ok test_iterops_deprecated (tests.test_iterops.IterOpsTestCase) ... ok test_topological_error (tests.test_iterops.IterOpsTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_iterops.py:74: ShapelyDeprecationWarning: The 'within' function is deprecated and will be removed in Shapely 2.0 list(iterops.within(polygon1, [polygon2])) ERROR:shapely.geos:TopologyException: side location conflict at 459 346. This can occur if the input geometry is invalid. INFO:shapely.geos:Self-intersection at or near point 379.33333333333331 299.66666666666669 ok test_invalid_intersection (tests.test_invalid_geometries.InvalidGeometriesTestCase) ... INFO:shapely.geos:Self-intersection at or near point 0.33333333333333337 0.33333333333333337 ERROR:shapely.geos:TopologyException: Input geom 0 is invalid: Self-intersection at 0.33333333333333337 0.33333333333333337 INFO:shapely.geos:Self-intersection at or near point 0.33333333333333337 0.33333333333333337 ERROR:shapely.geos:TopologyException: Input geom 1 is invalid: Self-intersection at 0.33333333333333337 0.33333333333333337 INFO:shapely.geos:Self-intersection at or near point 0.33333333333333337 0.33333333333333337 ok test_numpy_adapter (tests.test_point.PointTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asPoint()' or 'PointAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'Point()' constructor instead. method() /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/geometry/point.py:227: ShapelyDeprecationWarning: The 'array_interface' method is deprecated and will be removed in Shapely 2.0. return self.array_interface() ok test_numpy_asarray (tests.test_point.PointTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The array interface is deprecated and will no longer work in Shapely 2.0. Convert the '.coords' to a numpy array instead. method() ok test_point (tests.test_point.PointTestCase) ... ok test_point_adapter (tests.test_point.PointTestCase) ... ok test_point_empty (tests.test_point.PointTestCase) ... ok test_point_empty_mutate (tests.test_point.PointTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/shapely/geometry/base.py:250: ShapelyDeprecationWarning: Setting the 'coords' to mutate a Geometry in place is deprecated, and will not be possible any more in Shapely 2.0 super().__setattr__(name, value) ok test_point_mutate (tests.test_point.PointTestCase) ... ok test_geometrycollection (tests.test_orient.OrientTestCase) ... ok test_linearring (tests.test_orient.OrientTestCase) ... ok test_linestring (tests.test_orient.OrientTestCase) ... ok test_multilinestring (tests.test_orient.OrientTestCase) ... ok test_multipoint (tests.test_orient.OrientTestCase) ... ok test_multipolygon (tests.test_orient.OrientTestCase) ... ok test_point (tests.test_orient.OrientTestCase) ... ok test_polygon (tests.test_orient.OrientTestCase) ... ok test_cap (tests.test_styles.StylesTest) ... ok test_join (tests.test_styles.StylesTest) ... ok test_equals_argument_order (tests.test_linestring.LineStringTestCase) Test equals predicate functions correctly regardless of the order ... ok test_linestring (tests.test_linestring.LineStringTestCase) ... ok test_linestring_adapter (tests.test_linestring.LineStringTestCase) ... /usr/lib/python3.10/unittest/case.py:549: ShapelyDeprecationWarning: The proxy geometries (through the 'asShape()', 'asLineString()' or 'LineStringAdapter()' constructors) are deprecated and will be removed in Shapely 2.0. Use the 'shape()' function or the standard 'LineString()' constructor instead. method() ok test_linestring_empty (tests.test_linestring.LineStringTestCase) ... ok test_linestring_empty_mutate (tests.test_linestring.LineStringTestCase) ... ok test_linestring_mutate (tests.test_linestring.LineStringTestCase) ... ok test_numpy (tests.test_linestring.LineStringTestCase) ... ok test_numpy_adapter (tests.test_linestring.LineStringTestCase) ... ok test_numpy_asarray (tests.test_linestring.LineStringTestCase) ... /home/buildozer/aports/community/py3-shapely/src/Shapely-1.8.5/tests/test_linestring.py:270: ShapelyDeprecationWarning: Accessing the 'ctypes' attribute is deprecated, and will not be possible any more in Shapely 2.0 data = line.ctypes ok test_numpy_empty (tests.test_linestring.LineStringTestCase) ... ok test_numpy_linestring_coords (tests.test_linestring.LineStringTestCase) ... ok test_almost_equals (tests.test_equality.PointEqualityTestCase) ... ok test_almost_equals_default (tests.test_equality.PointEqualityTestCase) ... ok test_equals_exact (tests.test_equality.PointEqualityTestCase) ... ok test_lines (tests.test_delaunay.DelaunayTriangulation) ... ok test_point (tests.test_delaunay.DelaunayTriangulation) ... ok test_polys (tests.test_delaunay.DelaunayTriangulation) ... ok ---------------------------------------------------------------------- Ran 250 tests in 0.351s OK Python version: 3.10.8 (main, Oct 26 2022, 17:46:33) [GCC 12.2.1 20220924] GEOS version: 3.11.0-CAPI-1.17.0 Numpy version: 1.23.4 Cython speedups: True >>> py3-shapely: Entering fakeroot... running install /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py running egg_info writing Shapely.egg-info/PKG-INFO writing dependency_links to Shapely.egg-info/dependency_links.txt writing requirements to Shapely.egg-info/requires.txt writing top-level names to Shapely.egg-info/top_level.txt reading manifest file 'Shapely.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'Shapely.egg-info/SOURCES.txt' running build_ext skipping 'shapely/vectorized/_vectorized.c' Cython extension (up-to-date) running install_lib creating /home/buildozer/aports/community/py3-shapely/pkg creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10 creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/topology.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/ops.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/errors.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/_buildcfg.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/wkt.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/geos.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms copying build/lib.linux-armv8l-cpython-310/shapely/algorithms/polylabel.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms copying build/lib.linux-armv8l-cpython-310/shapely/algorithms/cga.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms copying build/lib.linux-armv8l-cpython-310/shapely/algorithms/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms copying build/lib.linux-armv8l-cpython-310/shapely/_geos.pxi -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/strtree.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/predicates.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/ctypes_declarations.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples copying build/lib.linux-armv8l-cpython-310/shapely/examples/geoms.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples copying build/lib.linux-armv8l-cpython-310/shapely/examples/dissolve.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples copying build/lib.linux-armv8l-cpython-310/shapely/examples/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples copying build/lib.linux-armv8l-cpython-310/shapely/examples/intersect.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples copying build/lib.linux-armv8l-cpython-310/shapely/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/validation.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/wkb.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/vectorized copying build/lib.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.cpython-310-arm-linux-gnueabihf.so -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/vectorized copying build/lib.linux-armv8l-cpython-310/shapely/vectorized/_vectorized.pyx -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/vectorized copying build/lib.linux-armv8l-cpython-310/shapely/vectorized/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/vectorized copying build/lib.linux-armv8l-cpython-310/shapely/linref.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/geo.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/multipoint.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/proxy.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/base.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/polygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/linestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/point.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/collection.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/multilinestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/multipolygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/geometry/conftest.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry copying build/lib.linux-armv8l-cpython-310/shapely/prepared.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/impl.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/coords.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely copying build/lib.linux-armv8l-cpython-310/shapely/iterops.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups copying build/lib.linux-armv8l-cpython-310/shapely/speedups/_speedups.cpython-310-arm-linux-gnueabihf.so -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups copying build/lib.linux-armv8l-cpython-310/shapely/speedups/_speedups.pyx -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups copying build/lib.linux-armv8l-cpython-310/shapely/speedups/_speedups.c -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups copying build/lib.linux-armv8l-cpython-310/shapely/speedups/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups copying build/lib.linux-armv8l-cpython-310/shapely/affinity.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/topology.py to topology.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/ops.py to ops.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/errors.py to errors.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/_buildcfg.py to _buildcfg.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/wkt.py to wkt.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geos.py to geos.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms/polylabel.py to polylabel.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms/cga.py to cga.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/algorithms/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/strtree.py to strtree.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/predicates.py to predicates.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/ctypes_declarations.py to ctypes_declarations.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples/geoms.py to geoms.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples/dissolve.py to dissolve.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/examples/intersect.py to intersect.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/validation.py to validation.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/wkb.py to wkb.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/vectorized/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/linref.py to linref.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/geo.py to geo.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/multipoint.py to multipoint.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/proxy.py to proxy.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/base.py to base.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/polygon.py to polygon.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/linestring.py to linestring.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/point.py to point.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/collection.py to collection.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/multilinestring.py to multilinestring.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/multipolygon.py to multipolygon.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/geometry/conftest.py to conftest.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/prepared.py to prepared.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/impl.py to impl.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/coords.py to coords.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/iterops.py to iterops.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/speedups/__init__.py to __init__.cpython-310.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/shapely/affinity.py to affinity.cpython-310.pyc writing byte-compilation script '/tmp/tmppb3vszl3.py' /usr/bin/python3 /tmp/tmppb3vszl3.py removing /tmp/tmppb3vszl3.py running install_egg_info Copying Shapely.egg-info to /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.10/site-packages/Shapely-1.8.5-py3.10.egg-info running install_scripts >>> py3-shapely*: Running postcheck for py3-shapely >>> py3-shapely*: Preparing package py3-shapely... >>> py3-shapely*: Stripping binaries >>> py3-shapely*: Scanning shared objects >>> py3-shapely*: Tracing dependencies... py3-numpy so:libc.musl-armhf.so.1 so:libgeos_c.so.1 >>> py3-shapely*: Package size: 1.9 MB >>> py3-shapely*: Compressing data... >>> py3-shapely*: Create checksum... >>> py3-shapely*: Create py3-shapely-1.8.5-r1.apk >>> py3-shapely: Build complete at Wed, 02 Nov 2022 02:32:54 +0000 elapsed time 0h 0m 22s >>> py3-shapely: Cleaning up srcdir >>> py3-shapely: Cleaning up pkgdir >>> py3-shapely: Uninstalling dependencies... (1/61) Purging .makedepends-py3-shapely (20221102.023233) (2/61) Purging geos-dev (3.11.0-r0) (3/61) Purging geos (3.11.0-r0) (4/61) Purging py3-matplotlib (3.6.1-r0) (5/61) Purging py3-cairo (1.21.0-r1) (6/61) Purging py3-certifi (2022.9.24-r0) (7/61) Purging py3-cycler (0.11.0-r0) (8/61) Purging py3-dateutil (2.8.2-r1) (9/61) Purging py3-six (1.16.0-r3) (10/61) Purging py3-fonttools (4.38.0-r0) (11/61) Purging py3-kiwisolver (1.2.0-r3) (12/61) Purging py3-pillow (9.3.0-r0) (13/61) Purging py3-olefile (0.46-r6) (14/61) Purging py3-tz (2022.6-r0) (15/61) Purging python3-tkinter (3.10.8-r1) (16/61) Purging py3-contourpy (1.0.6-r0) (17/61) Purging py3-numpy-dev (1.23.4-r0) (18/61) Purging py3-numpy (1.23.4-r0) (19/61) Purging py3-setuptools (65.5.0-r0) (20/61) Purging python3-dev (3.10.8-r3) (21/61) Purging cython (0.29.32-r0) (22/61) Purging py3-pytest (7.1.3-r1) (23/61) Purging py3-attrs (22.1.0-r0) (24/61) Purging py3-iniconfig (1.1.1-r3) (25/61) Purging py3-packaging (21.3-r2) (26/61) Purging py3-parsing (3.0.9-r0) (27/61) Purging py3-pluggy (1.0.0-r1) (28/61) Purging py3-py (1.11.0-r0) (29/61) Purging py3-tomli (2.0.1-r1) (30/61) Purging python3 (3.10.8-r3) (31/61) Purging openblas (0.3.21-r0) (32/61) Purging libgfortran (12.2.1_git20220924-r3) (33/61) Purging cairo (1.17.6-r3) (34/61) Purging libxext (1.3.5-r0) (35/61) Purging tk (8.6.12-r1) (36/61) Purging libxft (2.3.6-r0) (37/61) Purging libxrender (0.9.11-r0) (38/61) Purging libx11 (1.8.1-r1) (39/61) Purging libxcb (1.15-r0) (40/61) Purging libxau (1.0.10-r0) (41/61) Purging libxdmcp (1.1.3-r1) (42/61) Purging libbsd (0.11.7-r0) (43/61) Purging libmd (1.0.4-r0) (44/61) Purging fontconfig (2.14.1-r0) (45/61) Purging freetype (2.12.1-r0) (46/61) Purging libpng (1.6.38-r0) (47/61) Purging pixman (0.42.0-r0) (48/61) Purging libffi (3.4.4-r0) (49/61) Purging gdbm (1.23-r0) (50/61) Purging mpdecimal (2.5.1-r1) (51/61) Purging readline (8.2.0-r0) (52/61) Purging sqlite-libs (3.39.4-r0) (53/61) Purging libimagequant (4.0.4-r0) (54/61) Purging tiff (4.4.0-r1) (55/61) Purging libjpeg-turbo (2.1.4-r0) (56/61) Purging lcms2 (2.13.1-r0) (57/61) Purging openjpeg (2.5.0-r0) (58/61) Purging libwebp (1.2.4-r1) (59/61) Purging tcl (8.6.12-r1) (60/61) Purging tzdata (2022f-r0) (61/61) Purging qhull (2020.2-r2) Executing busybox-1.35.0-r27.trigger OK: 222 MiB in 97 packages >>> py3-shapely: Updating the community/armhf repository index... >>> py3-shapely: Signing the index...