>>> py3-cu2qu: Building community/py3-cu2qu 1.6.7-r4 (using abuild 3.10.0_rc1-r2) started Thu, 03 Nov 2022 15:29:20 +0000
>>> py3-cu2qu: Checking sanity of /home/buildozer/aports/community/py3-cu2qu/APKBUILD...
>>> py3-cu2qu: Analyzing dependencies...
>>> py3-cu2qu: Installing for build: build-base python3 py3-fonttools py3-fs py3-setuptools py3-setuptools_scm python3-dev cython py3-pytest py3-coverage py3-defcon py3-pytest-runner
(1/31) Installing libbz2 (1.0.8-r3)
(2/31) Installing libffi (3.4.4-r0)
(3/31) Installing gdbm (1.23-r0)
(4/31) Installing xz-libs (5.2.7-r0)
(5/31) Installing mpdecimal (2.5.1-r1)
(6/31) Installing readline (8.2.0-r0)
(7/31) Installing sqlite-libs (3.39.4-r0)
(8/31) Installing python3 (3.10.8-r3)
(9/31) Installing py3-fonttools (4.38.0-r0)
(10/31) Installing py3-appdirs (1.4.4-r4)
(11/31) Installing py3-six (1.16.0-r3)
(12/31) Installing py3-tz (2022.6-r0)
(13/31) Installing py3-fs (2.4.16-r0)
(14/31) Installing py3-parsing (3.0.9-r0)
(15/31) Installing py3-packaging (21.3-r2)
(16/31) Installing py3-setuptools (65.5.0-r0)
(17/31) Installing py3-tomli (2.0.1-r1)
(18/31) Installing py3-typing-extensions (4.4.0-r0)
(19/31) Installing py3-setuptools_scm (7.0.5-r0)
(20/31) Installing python3-dev (3.10.8-r3)
(21/31) Installing cython (0.29.32-r0)
(22/31) Installing py3-attrs (22.1.0-r0)
(23/31) Installing py3-iniconfig (1.1.1-r3)
(24/31) Installing py3-pluggy (1.0.0-r1)
(25/31) Installing py3-py (1.11.0-r0)
(26/31) Installing py3-pytest (7.1.3-r1)
(27/31) Installing py3-coverage (5.5-r2)
(28/31) Installing py3-unicodedata2 (15.0.0-r0)
(29/31) Installing py3-defcon (0.10.2-r0)
(30/31) Installing py3-pytest-runner (5.3.2-r1)
(31/31) Installing .makedepends-py3-cu2qu (20221103.152924)
Executing busybox-1.35.0-r27.trigger
OK: 381 MiB in 123 packages
>>> py3-cu2qu: Cleaning up srcdir
>>> py3-cu2qu: Cleaning up pkgdir
>>> py3-cu2qu: Fetching https://distfiles.alpinelinux.org/distfiles/v3.17/py3-cu2qu-1.6.7.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 81401  100 81401    0     0   161k      0 --:--:-- --:--:-- --:--:--  161k
>>> py3-cu2qu: Fetching https://distfiles.alpinelinux.org/distfiles/v3.17/py3-cu2qu-1.6.7.tar.gz
>>> py3-cu2qu: Checking sha512sums...
py3-cu2qu-1.6.7.tar.gz: OK
>>> py3-cu2qu: Unpacking /var/cache/distfiles/v3.17/py3-cu2qu-1.6.7.tar.gz...
/usr/lib/python3.10/site-packages/setuptools/config/setupcfg.py:508: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead.
  warnings.warn(msg, warning_class)
running build
running build_py
creating build
creating build/lib.linux-s390x-cpython-310
creating build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/cu2qu.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/_version.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/__init__.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/ufo.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/errors.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/__main__.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/pens.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/cython.py -> build/lib.linux-s390x-cpython-310/cu2qu
copying Lib/cu2qu/cli.py -> build/lib.linux-s390x-cpython-310/cu2qu
running egg_info
creating Lib/cu2qu.egg-info
writing Lib/cu2qu.egg-info/PKG-INFO
writing dependency_links to Lib/cu2qu.egg-info/dependency_links.txt
writing entry points to Lib/cu2qu.egg-info/entry_points.txt
writing requirements to Lib/cu2qu.egg-info/requires.txt
writing top-level names to Lib/cu2qu.egg-info/top_level.txt
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
Compiling Lib/cu2qu/cu2qu.py because it changed.
[1/1] Cythonizing Lib/cu2qu/cu2qu.py
reading manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
copying Lib/cu2qu/cu2qu.c -> build/lib.linux-s390x-cpython-310/cu2qu
running build_ext
building 'cu2qu.cu2qu' extension
creating build/temp.linux-s390x-cpython-310
creating build/temp.linux-s390x-cpython-310/Lib
creating build/temp.linux-s390x-cpython-310/Lib/cu2qu
gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x200000 -Os -Os -fPIC -DCYTHON_TRACE_NOGIL=1 -I/usr/include/python3.10 -c Lib/cu2qu/cu2qu.c -o build/temp.linux-s390x-cpython-310/Lib/cu2qu/cu2qu.o
gcc -shared -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Wl,--as-needed,-O1,--sort-common -Os -Os build/temp.linux-s390x-cpython-310/Lib/cu2qu/cu2qu.o -L/usr/lib -o build/lib.linux-s390x-cpython-310/cu2qu/cu2qu.cpython-310-s390x-linux-gnu.so
============================= test session starts ==============================
platform linux -- Python 3.10.8, pytest-7.1.3, pluggy-1.0.0 -- /usr/bin/python3
cachedir: .pytest_cache
rootdir: /home/buildozer/aports/community/py3-cu2qu/src/cu2qu-1.6.7, configfile: setup.cfg, testpaths: tests
collecting ... collected 67 items

tests/cli_test.py::MainTest::test_single_input_no_output PASSED
tests/cli_test.py::MainTest::test_single_input_output_file PASSED
tests/cli_test.py::MainTest::test_multiple_inputs_output_dir PASSED
tests/cli_test.py::MainTest::test_interpolatable_inplace PASSED
tests/cli_test.py::MainTest::test_copytree[normal] PASSED
tests/cli_test.py::MainTest::test_copytree[interpolatable] PASSED
tests/cli_test.py::MainTest::test_multiprocessing PASSED
tests/cli_test.py::MainTest::test_keep_direction PASSED
tests/cli_test.py::MainTest::test_conversion_error PASSED
tests/cli_test.py::MainTest::test_conversion_error_short PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_does_not_exceed_tolerance PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_does_not_exceed_tolerance_multiple PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_results_unchanged PASSED
tests/cu2qu_test.py::CurveToQuadraticTest::test_results_unchanged_multiple PASSED
single errors
1.6: # (1)
2.4: # (4)
2.5: # (1)
2.6: ### (26)
2.7: #### (36)
2.8: ####### (61)
2.9: ####### (67)
3.0: ####### (64)
3.1: ####### (63)
3.2: ###### (51)
3.3: ###### (51)
3.4: ###### (54)
3.5: ##### (40)
3.6: ##### (44)
3.7: ###### (52)
3.8: ###### (55)
3.9: ##### (48)
4.0: #### (34)
4.1: ### (27)
4.2: ##### (43)
4.3: #### (32)
4.4: #### (30)
4.5: ### (27)
4.6: #### (32)
4.7: ## (18)
4.8: ### (21)
4.9: ## (17)
5.0: # (1)

compatible errors
0.2: # (2)
0.3: # (4)
0.4: # (4)
0.5: # (2)
0.6: # (4)
0.7: # (4)
0.8: # (6)
0.9: # (6)
1.0: # (5)
1.1: # (4)
1.2: # (8)
1.3: # (6)
1.4: # (2)
1.5: ## (11)
1.6: # (3)
1.7: ## (10)
1.8: # (4)
1.9: ## (11)
2.0: # (5)
2.1: # (4)
2.2: # (7)
2.3: ## (10)
2.4: # (3)
2.5: # (5)
2.6: ## (11)
2.7: ## (11)
2.8: ## (12)
2.9: ## (13)
3.0: ## (13)
3.1: ## (12)
3.2: ## (10)
3.3: # (5)
3.4: ## (10)
3.5: # (6)
3.6: # (6)
3.7: # (6)
3.8: # (7)
3.9: # (5)
4.0: # (5)
4.1: # (5)
4.2: # (7)
4.3: # (1)
4.4: # (6)
4.5: # (8)
4.6: # (6)
4.7: # (2)
4.8: # (2)
4.9: # (1)

single spline lengths
2: # (6)
3: ### (26)
4: ######### (82)
5: ######################## (232)
6: ##################################### (360)
7: ########################### (266)
8: ### (28)

compatible spline lengths
5: ## (11)
6: #### (35)
7: ##### (49)
8: # (5)

tests/pens_test.py::TestCu2QuPen::test__check_contour_closed PASSED
tests/pens_test.py::TestCu2QuPen::test__check_contour_is_open PASSED
tests/pens_test.py::TestCu2QuPen::test_addComponent PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_composite_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_mixed_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_convert_simple_glyph PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_2_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_3_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_more_than_3_points PASSED
tests/pens_test.py::TestCu2QuPen::test_curveTo_no_points PASSED
tests/pens_test.py::TestCu2QuPen::test_ignore_single_points PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_more_than_1_point PASSED
tests/pens_test.py::TestCu2QuPen::test_qCurveTo_no_points PASSED
tests/pens_test.py::TestCu2QuPen::test_reverse_direction PASSED
tests/pens_test.py::TestCu2QuPen::test_stats PASSED
tests/pens_test.py::TestCu2QuPointPen::test__flushContour_restore_starting_point PASSED
tests/pens_test.py::TestCu2QuPointPen::test_addComponent PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_composite_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_mixed_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_convert_simple_glyph PASSED
tests/pens_test.py::TestCu2QuPointPen::test_quad_no_oncurve PASSED
tests/pens_test.py::TestCu2QuPointPen::test_reverse_direction PASSED
tests/pens_test.py::TestCu2QuPointPen::test_stats PASSED
tests/pens_test.py::TestCu2QuPointPen::test_super_bezier_curve PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_modified PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_stats PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_dump_stats PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_remember_curve_type PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_no_remember_curve_type PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_different_glyphsets PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_em_float PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_em_list PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_float PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_max_err_list PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_both_max_err_and_max_err_em PASSED
tests/ufo_test.py::FontsToQuadraticTest::test_single_font PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_modified[lines-only] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_modified[has-curves] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_stats PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_max_err_float PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_max_err_list PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_reverse_direction PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_single_glyph PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_glyphs[unequal-length] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_glyphs[different-segment-types] PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_incompatible_fonts PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_already_quadratic PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_open_paths PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_ignore_components PASSED
tests/ufo_test.py::GlyphsToQuadraticTest::test_overlapping_start_end_points PASSED
tests/utils.py::tests.utils._repr_pen_commands PASSED

=============================== warnings summary ===============================
../../../../../../../usr/lib/python3.10/site-packages/fontTools/misc/py23.py:13
  /usr/lib/python3.10/site-packages/fontTools/misc/py23.py:13: DeprecationWarning: The py23 module has been deprecated and will be removed in a future release. Please update your code.
    warnings.warn(

-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
======================== 67 passed, 1 warning in 3.92s =========================
>>> py3-cu2qu: Entering fakeroot...
/usr/lib/python3.10/site-packages/setuptools/config/setupcfg.py:508: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead.
  warnings.warn(msg, warning_class)
running install
/usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
running build
running build_py
copying Lib/cu2qu/_version.py -> build/lib.linux-s390x-cpython-310/cu2qu
running egg_info
writing Lib/cu2qu.egg-info/PKG-INFO
writing dependency_links to Lib/cu2qu.egg-info/dependency_links.txt
writing entry points to Lib/cu2qu.egg-info/entry_points.txt
writing requirements to Lib/cu2qu.egg-info/requires.txt
writing top-level names to Lib/cu2qu.egg-info/top_level.txt
reading manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'Lib/cu2qu.egg-info/SOURCES.txt'
running build_ext
running install_lib
creating /home/buildozer/aports/community/py3-cu2qu/pkg
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/cu2qu.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
creating /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/ufo.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/pens.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/errors.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/__init__.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/cli.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/__pycache__/_version.cpython-310.pyc -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__pycache__
copying build/lib.linux-s390x-cpython-310/cu2qu/_version.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/__init__.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/ufo.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/errors.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/cu2qu.c -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/__main__.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/cu2qu.cpython-310-s390x-linux-gnu.so -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/pens.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/cython.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
copying build/lib.linux-s390x-cpython-310/cu2qu/cli.py -> /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/cu2qu.py to cu2qu.cpython-310.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/_version.py to _version.cpython-310.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/__main__.py to __main__.cpython-310.pyc
byte-compiling /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu/cython.py to cython.cpython-310.pyc
running install_egg_info
Copying Lib/cu2qu.egg-info to /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/lib/python3.10/site-packages/cu2qu-1.6.7-py3.10.egg-info
running install_scripts
Installing cu2qu script to /home/buildozer/aports/community/py3-cu2qu/pkg/py3-cu2qu/usr/bin
>>> py3-cu2qu*: Running postcheck for py3-cu2qu
>>> py3-cu2qu*: Preparing package py3-cu2qu...
>>> py3-cu2qu*: Stripping binaries
>>> py3-cu2qu*: Scanning shared objects
>>> py3-cu2qu*: Tracing dependencies...
	python3
	py3-fonttools
	py3-fs
	so:libc.musl-s390x.so.1
>>> py3-cu2qu*: Package size: 908.0 KB
>>> py3-cu2qu*: Compressing data...
>>> py3-cu2qu*: Create checksum...
>>> py3-cu2qu*: Create py3-cu2qu-1.6.7-r4.apk
>>> py3-cu2qu: Build complete at Thu, 03 Nov 2022 15:29:44 +0000 elapsed time 0h 0m 24s
>>> py3-cu2qu: Cleaning up srcdir
>>> py3-cu2qu: Cleaning up pkgdir
>>> py3-cu2qu: Uninstalling dependencies...
(1/31) Purging .makedepends-py3-cu2qu (20221103.152924)
(2/31) Purging py3-setuptools_scm (7.0.5-r0)
(3/31) Purging py3-typing-extensions (4.4.0-r0)
(4/31) Purging python3-dev (3.10.8-r3)
(5/31) Purging cython (0.29.32-r0)
(6/31) Purging py3-pytest (7.1.3-r1)
(7/31) Purging py3-attrs (22.1.0-r0)
(8/31) Purging py3-iniconfig (1.1.1-r3)
(9/31) Purging py3-pluggy (1.0.0-r1)
(10/31) Purging py3-py (1.11.0-r0)
(11/31) Purging py3-tomli (2.0.1-r1)
(12/31) Purging py3-coverage (5.5-r2)
(13/31) Purging py3-defcon (0.10.2-r0)
(14/31) Purging py3-fonttools (4.38.0-r0)
(15/31) Purging py3-fs (2.4.16-r0)
(16/31) Purging py3-appdirs (1.4.4-r4)
(17/31) Purging py3-six (1.16.0-r3)
(18/31) Purging py3-tz (2022.6-r0)
(19/31) Purging py3-unicodedata2 (15.0.0-r0)
(20/31) Purging py3-pytest-runner (5.3.2-r1)
(21/31) Purging py3-setuptools (65.5.0-r0)
(22/31) Purging py3-packaging (21.3-r2)
(23/31) Purging py3-parsing (3.0.9-r0)
(24/31) Purging python3 (3.10.8-r3)
(25/31) Purging libbz2 (1.0.8-r3)
(26/31) Purging libffi (3.4.4-r0)
(27/31) Purging gdbm (1.23-r0)
(28/31) Purging xz-libs (5.2.7-r0)
(29/31) Purging mpdecimal (2.5.1-r1)
(30/31) Purging readline (8.2.0-r0)
(31/31) Purging sqlite-libs (3.39.4-r0)
Executing busybox-1.35.0-r27.trigger
OK: 240 MiB in 92 packages
>>> py3-cu2qu: Updating the community/s390x repository index...
>>> py3-cu2qu: Signing the index...