>>> xset: Building community/xset 1.2.5-r1 (using abuild 3.11.0_rc13-r0) started Fri, 05 May 2023 02:12:07 +0000
>>> xset: Checking sanity of /home/buildozer/aports/community/xset/APKBUILD...
>>> xset: Analyzing dependencies...
>>> xset: Installing for build: build-base libxmu-dev libx11-dev libxext-dev util-macros
(1/44) Installing libblkid (2.38.1-r7)
(2/44) Installing libuuid (2.38.1-r7)
(3/44) Installing libfdisk (2.38.1-r7)
(4/44) Installing libmount (2.38.1-r7)
(5/44) Installing libsmartcols (2.38.1-r7)
(6/44) Installing util-linux-dev (2.38.1-r7)
(7/44) Installing libxau (1.0.11-r2)
(8/44) Installing libmd (1.0.4-r2)
(9/44) Installing libbsd (0.11.7-r1)
(10/44) Installing libxdmcp (1.1.4-r2)
(11/44) Installing libxcb (1.15-r1)
(12/44) Installing libx11 (1.8.4-r3)
(13/44) Installing libxext (1.3.5-r2)
(14/44) Installing libice (1.1.1-r2)
(15/44) Installing libsm (1.2.4-r1)
(16/44) Installing libxt (1.3.0-r2)
(17/44) Installing libxmu (1.1.4-r2)
(18/44) Installing xorgproto (2022.2-r0)
(19/44) Installing libxau-dev (1.0.11-r2)
(20/44) Installing libbz2 (1.0.8-r5)
(21/44) Installing libffi (3.4.4-r2)
(22/44) Installing gdbm (1.23-r1)
(23/44) Installing xz-libs (5.4.2-r1)
(24/44) Installing mpdecimal (2.5.1-r2)
(25/44) Installing libpanelw (6.4_p20230429-r0)
(26/44) Installing readline (8.2.1-r1)
(27/44) Installing sqlite-libs (3.41.2-r2)
(28/44) Installing python3 (3.11.3-r10)
(29/44) Installing python3-pycache-pyc0 (3.11.3-r10)
(30/44) Installing pyc (0.1-r0)
(31/44) Installing xcb-proto-pyc (1.15.2-r2)
(32/44) Installing python3-pyc (3.11.3-r10)
(33/44) Installing xcb-proto (1.15.2-r2)
(34/44) Installing libxdmcp-dev (1.1.4-r2)
(35/44) Installing libxcb-dev (1.15-r1)
(36/44) Installing xtrans (1.4.0-r3)
(37/44) Installing libx11-dev (1.8.4-r3)
(38/44) Installing libxext-dev (1.3.5-r2)
(39/44) Installing libice-dev (1.1.1-r2)
(40/44) Installing libsm-dev (1.2.4-r1)
(41/44) Installing libxt-dev (1.3.0-r2)
(42/44) Installing libxmu-dev (1.1.4-r2)
(43/44) Installing util-macros (1.20.0-r0)
(44/44) Installing .makedepends-xset (20230505.021207)
Executing busybox-1.36.0-r8.trigger
OK: 335 MiB in 142 packages
>>> xset: Cleaning up srcdir
>>> xset: Cleaning up pkgdir
>>> xset: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/xset-1.2.5.tar.xz
>>> xset: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/xset-1.2.5.tar.xz
>>> xset: Checking sha512sums...
xset-1.2.5.tar.xz: OK
>>> xset: Unpacking /var/cache/distfiles/v3.18/xset-1.2.5.tar.xz...
checking for armv7-alpine-linux-musleabihf-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking for gcc options needed to detect all undeclared functions... none needed
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for armv7-alpine-linux-musleabihf-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... armv7-alpine-linux-musleabihf
checking host system type... armv7-alpine-linux-musleabihf
checking for a sed that does not truncate output... /bin/sed
checking if gcc supports -Werror=unknown-warning-option... no
checking if gcc supports -Werror=unused-command-line-argument... no
checking if gcc supports -Wall... yes
checking if gcc supports -Wpointer-arith... yes
checking if gcc supports -Wmissing-declarations... yes
checking if gcc supports -Wformat=2... yes
checking if gcc supports -Wstrict-prototypes... yes
checking if gcc supports -Wmissing-prototypes... yes
checking if gcc supports -Wnested-externs... yes
checking if gcc supports -Wbad-function-cast... yes
checking if gcc supports -Wold-style-definition... yes
checking if gcc supports -Wdeclaration-after-statement... yes
checking if gcc supports -Wunused... yes
checking if gcc supports -Wuninitialized... yes
checking if gcc supports -Wshadow... yes
checking if gcc supports -Wmissing-noreturn... yes
checking if gcc supports -Wmissing-format-attribute... yes
checking if gcc supports -Wredundant-decls... yes
checking if gcc supports -Wlogical-op... yes
checking if gcc supports -Werror=implicit... yes
checking if gcc supports -Werror=nonnull... yes
checking if gcc supports -Werror=init-self... yes
checking if gcc supports -Werror=main... yes
checking if gcc supports -Werror=missing-braces... yes
checking if gcc supports -Werror=sequence-point... yes
checking if gcc supports -Werror=return-type... yes
checking if gcc supports -Werror=trigraphs... yes
checking if gcc supports -Werror=array-bounds... yes
checking if gcc supports -Werror=write-strings... yes
checking if gcc supports -Werror=address... yes
checking if gcc supports -Werror=int-to-pointer-cast... yes
checking if gcc supports -Werror=pointer-to-int-cast... yes
checking if gcc supports -pedantic... yes
checking if gcc supports -Werror... yes
checking if gcc supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for usleep... yes
checking for XSET... yes
checking for SET_X11... yes
checking for SET_XEXT... yes
checking for X11/extensions/dpms.h... yes
checking for X11/extensions/MITMisc.h... yes
checking for SET_XKB... yes
checking for X11/XKBlib.h... yes
without xf86misc
checking for SET_FONTCACHE... no
not found
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
Making all in man
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
  GEN      xset.1
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
  CC       xset.o
  CCLD     xset
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
Making check in man
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[1]: Nothing to be done for 'check'.
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
>>> xset: Entering fakeroot...
Making install in man
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[2]: Nothing to be done for 'install-exec-am'.
 .././install-sh -c -d '/home/buildozer/aports/community/xset/pkg/xset/usr/share/man/man1'
 /usr/bin/install -c -m 644 xset.1 '/home/buildozer/aports/community/xset/pkg/xset/usr/share/man/man1'
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5/man'
make[1]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make[2]: Entering directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make[2]: Nothing to be done for 'install-data-am'.
 ./install-sh -c -d '/home/buildozer/aports/community/xset/pkg/xset/usr/bin'
  /usr/bin/install -c xset '/home/buildozer/aports/community/xset/pkg/xset/usr/bin'
make[2]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
make[1]: Leaving directory '/home/buildozer/aports/community/xset/src/xset-1.2.5'
>>> xset-doc*: Running split function doc...
>>> xset-doc*: Preparing subpackage xset-doc...
>>> xset-doc*: Running postcheck for xset-doc
>>> xset*: Running postcheck for xset
>>> xset*: Preparing package xset...
>>> xset*: Stripping binaries
>>> xset-doc*: Scanning shared objects
>>> xset*: Scanning shared objects
>>> xset-doc*: Tracing dependencies...
>>> xset-doc*: Package size: 28.0 KB
>>> xset-doc*: Compressing data...
>>> xset-doc*: Create checksum...
>>> xset-doc*: Create xset-doc-1.2.5-r1.apk
>>> xset*: Tracing dependencies...
	so:libX11.so.6
	so:libXext.so.6
	so:libXmuu.so.1
	so:libc.musl-armv7.so.1
>>> xset*: Package size: 36.0 KB
>>> xset*: Compressing data...
>>> xset*: Create checksum...
>>> xset*: Create xset-1.2.5-r1.apk
>>> xset: Build complete at Fri, 05 May 2023 02:12:11 +0000 elapsed time 0h 0m 4s
>>> xset: Cleaning up srcdir
>>> xset: Cleaning up pkgdir
>>> xset: Uninstalling dependencies...
(1/44) Purging .makedepends-xset (20230505.021207)
(2/44) Purging libxmu-dev (1.1.4-r2)
(3/44) Purging libxmu (1.1.4-r2)
(4/44) Purging libxext-dev (1.3.5-r2)
(5/44) Purging libxext (1.3.5-r2)
(6/44) Purging util-macros (1.20.0-r0)
(7/44) Purging libxt-dev (1.3.0-r2)
(8/44) Purging libxt (1.3.0-r2)
(9/44) Purging python3-pyc (3.11.3-r10)
(10/44) Purging python3-pycache-pyc0 (3.11.3-r10)
(11/44) Purging xcb-proto-pyc (1.15.2-r2)
(12/44) Purging pyc (0.1-r0)
(13/44) Purging libx11-dev (1.8.4-r3)
(14/44) Purging xtrans (1.4.0-r3)
(15/44) Purging libx11 (1.8.4-r3)
(16/44) Purging libxcb-dev (1.15-r1)
(17/44) Purging libxcb (1.15-r1)
(18/44) Purging xcb-proto (1.15.2-r2)
(19/44) Purging python3 (3.11.3-r10)
(20/44) Purging gdbm (1.23-r1)
(21/44) Purging libsm-dev (1.2.4-r1)
(22/44) Purging libsm (1.2.4-r1)
(23/44) Purging util-linux-dev (2.38.1-r7)
(24/44) Purging libfdisk (2.38.1-r7)
(25/44) Purging libmount (2.38.1-r7)
(26/44) Purging libsmartcols (2.38.1-r7)
(27/44) Purging libuuid (2.38.1-r7)
(28/44) Purging libblkid (2.38.1-r7)
(29/44) Purging libxdmcp-dev (1.1.4-r2)
(30/44) Purging libxdmcp (1.1.4-r2)
(31/44) Purging libbsd (0.11.7-r1)
(32/44) Purging libbz2 (1.0.8-r5)
(33/44) Purging libffi (3.4.4-r2)
(34/44) Purging libice-dev (1.1.1-r2)
(35/44) Purging libice (1.1.1-r2)
(36/44) Purging libmd (1.0.4-r2)
(37/44) Purging libpanelw (6.4_p20230429-r0)
(38/44) Purging libxau-dev (1.0.11-r2)
(39/44) Purging libxau (1.0.11-r2)
(40/44) Purging mpdecimal (2.5.1-r2)
(41/44) Purging readline (8.2.1-r1)
(42/44) Purging sqlite-libs (3.41.2-r2)
(43/44) Purging xorgproto (2022.2-r0)
(44/44) Purging xz-libs (5.4.2-r1)
Executing busybox-1.36.0-r8.trigger
OK: 283 MiB in 98 packages
>>> xset: Updating the community/armv7 repository index...
>>> xset: Signing the index...