>>> py3-shapely: Building community/py3-shapely 2.0.1-r3 (using abuild 3.11.0_rc13-r0) started Sat, 29 Apr 2023 16:19:53 +0000 >>> py3-shapely: Checking sanity of /home/buildozer/aports/community/py3-shapely/APKBUILD... >>> py3-shapely: Analyzing dependencies... >>> py3-shapely: Installing for build: build-base py3-numpy geos-dev py3-matplotlib py3-numpy-dev py3-packaging py3-setuptools python3-dev cython py3-pytest (1/84) Installing libgfortran (12.2.1_git20220924-r10) (2/84) Installing openblas (0.3.23-r0) (3/84) Installing libbz2 (1.0.8-r5) (4/84) Installing libffi (3.4.4-r2) (5/84) Installing gdbm (1.23-r1) (6/84) Installing xz-libs (5.4.2-r1) (7/84) Installing mpdecimal (2.5.1-r2) (8/84) Installing libpanelw (6.4_p20230424-r0) (9/84) Installing readline (8.2.1-r1) (10/84) Installing sqlite-libs (3.41.2-r2) (11/84) Installing python3 (3.11.3-r10) (12/84) Installing python3-pycache-pyc0 (3.11.3-r10) (13/84) Installing pyc (0.1-r0) (14/84) Installing py3-numpy-pyc (1.24.3-r0) (15/84) Installing python3-pyc (3.11.3-r10) (16/84) Installing py3-numpy (1.24.3-r0) (17/84) Installing geos (3.11.2-r0) (18/84) Installing geos-dev (3.11.2-r0) (19/84) Installing libxau (1.0.11-r1) (20/84) Installing libmd (1.0.4-r2) (21/84) Installing libbsd (0.11.7-r1) (22/84) Installing libxdmcp (1.1.4-r1) (23/84) Installing libxcb (1.15-r1) (24/84) Installing libx11 (1.8.4-r2) (25/84) Installing libxext (1.3.5-r1) (26/84) Installing libxrender (0.9.11-r2) (27/84) Installing libpng (1.6.39-r3) (28/84) Installing freetype (2.13.0-r5) (29/84) Installing fontconfig (2.14.2-r3) (30/84) Installing pixman (0.42.2-r1) (31/84) Installing cairo (1.17.8-r1) (32/84) Installing py3-cairo (1.23.0-r4) (33/84) Installing py3-cairo-pyc (1.23.0-r4) (34/84) Installing py3-certifi (2022.12.7-r2) (35/84) Installing py3-certifi-pyc (2022.12.7-r2) (36/84) Installing py3-contourpy (1.0.7-r1) (37/84) Installing py3-contourpy-pyc (1.0.7-r1) (38/84) Installing py3-cycler (0.11.0-r2) (39/84) Installing py3-cycler-pyc (0.11.0-r2) (40/84) Installing py3-six (1.16.0-r6) (41/84) Installing py3-six-pyc (1.16.0-r6) (42/84) Installing py3-dateutil (2.8.2-r3) (43/84) Installing py3-dateutil-pyc (2.8.2-r3) (44/84) Installing py3-fonttools (4.39.3-r1) (45/84) Installing py3-fonttools-pyc (4.39.3-r1) (46/84) Installing py3-kiwisolver (1.4.4-r1) (47/84) Installing py3-kiwisolver-pyc (1.4.4-r1) (48/84) Installing py3-parsing (3.0.9-r2) (49/84) Installing py3-parsing-pyc (3.0.9-r2) (50/84) Installing py3-packaging (23.1-r1) (51/84) Installing py3-packaging-pyc (23.1-r1) (52/84) Installing libjpeg-turbo (2.1.5.1-r2) (53/84) Installing lcms2 (2.15-r1) (54/84) Installing openjpeg (2.5.0-r3) (55/84) Installing libwebp (1.3.0-r1) (56/84) Installing tiff (4.5.0-r6) (57/84) Installing py3-pillow (9.5.0-r1) (58/84) Installing py3-pillow-pyc (9.5.0-r1) (59/84) Installing py3-tz (2023.3-r1) (60/84) Installing py3-tz-pyc (2023.3-r1) (61/84) Installing tzdata (2023c-r1) (62/84) Installing tcl (8.6.13-r1) (63/84) Installing libxft (2.3.8-r0) (64/84) Installing tk (8.6.13-r1) (65/84) Installing python3-tkinter (3.11.3-r1) (66/84) Installing python3-tkinter-pyc (3.11.3-r1) (67/84) Installing qhull (2020.2-r2) (68/84) Installing py3-matplotlib (3.7.1-r0) (69/84) Installing py3-matplotlib-pyc (3.7.1-r0) (70/84) Installing py3-numpy-dev (1.24.3-r0) (71/84) Installing py3-setuptools (67.7.2-r0) (72/84) Installing py3-setuptools-pyc (67.7.2-r0) (73/84) Installing python3-dev (3.11.3-r10) (74/84) Installing cython (0.29.34-r2) (75/84) Installing cython-pyc (0.29.34-r2) (76/84) Installing py3-iniconfig (1.1.1-r6) (77/84) Installing py3-iniconfig-pyc (1.1.1-r6) (78/84) Installing py3-pluggy (1.0.0-r3) (79/84) Installing py3-pluggy-pyc (1.0.0-r3) (80/84) Installing py3-py (1.11.0-r2) (81/84) Installing py3-py-pyc (1.11.0-r2) (82/84) Installing py3-pytest (7.3.1-r1) (83/84) Installing py3-pytest-pyc (7.3.1-r1) (84/84) Installing .makedepends-py3-shapely (20230429.161954) Executing busybox-1.36.0-r8.trigger OK: 642 MiB in 182 packages >>> py3-shapely: Cleaning up srcdir >>> py3-shapely: Cleaning up pkgdir >>> py3-shapely: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/shapely-2.0.1.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 17 269k 17 49134 0 0 115k 0 0:00:02 --:--:-- 0:00:02 115k 100 269k 100 269k 0 0 179k 0 0:00:01 0:00:01 --:--:-- 179k 100 269k 100 269k 0 0 179k 0 0:00:01 0:00:01 --:--:-- 179k >>> py3-shapely: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/shapely-2.0.1.tar.gz >>> py3-shapely: Checking sha512sums... shapely-2.0.1.tar.gz: OK >>> py3-shapely: Unpacking /var/cache/distfiles/v3.18/shapely-2.0.1.tar.gz... Compiling shapely/_geometry_helpers.pyx because it changed. Compiling shapely/_geos.pyx because it changed. [1/2] Cythonizing shapely/_geometry_helpers.pyx [2/2] Cythonizing shapely/_geos.pyx /usr/lib/python3.11/site-packages/setuptools/config/pyprojecttoml.py:66: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*. config = read_configuration(filepath, True, ignore_option_errors, dist) running build running build_py creating build creating build/lib.linux-s390x-cpython-311 creating build/lib.linux-s390x-cpython-311/shapely copying shapely/wkb.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/testing.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/_version.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/strtree.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/coords.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/__init__.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/coordinates.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/plotting.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/io.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/linear.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/_geometry.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/affinity.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/wkt.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/prepared.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/errors.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/creation.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/decorators.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/speedups.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/constructive.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/set_operations.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/_enum.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/measurement.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/ops.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/geos.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/validation.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/_ragged_array.py -> build/lib.linux-s390x-cpython-311/shapely copying shapely/predicates.py -> build/lib.linux-s390x-cpython-311/shapely creating build/lib.linux-s390x-cpython-311/shapely/vectorized copying shapely/vectorized/__init__.py -> build/lib.linux-s390x-cpython-311/shapely/vectorized creating build/lib.linux-s390x-cpython-311/shapely/algorithms copying shapely/algorithms/__init__.py -> build/lib.linux-s390x-cpython-311/shapely/algorithms copying shapely/algorithms/cga.py -> build/lib.linux-s390x-cpython-311/shapely/algorithms copying shapely/algorithms/polylabel.py -> build/lib.linux-s390x-cpython-311/shapely/algorithms creating build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_constructive.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_creation_indices.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/common.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/__init__.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_io.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_predicates.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_creation.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_geometry.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_misc.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_linear.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_set_operations.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_plotting.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_ragged_array.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_measurement.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_testing.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_coordinates.py -> build/lib.linux-s390x-cpython-311/shapely/tests copying shapely/tests/test_strtree.py -> build/lib.linux-s390x-cpython-311/shapely/tests creating build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/multipoint.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/__init__.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/polygon.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/linestring.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/multipolygon.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/geo.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/point.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/base.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/collection.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/conftest.py -> build/lib.linux-s390x-cpython-311/shapely/geometry copying shapely/geometry/multilinestring.py -> build/lib.linux-s390x-cpython-311/shapely/geometry creating build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_multi.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/__init__.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_polygon.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_geometry_base.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_format.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_point.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_emptiness.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_collection.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_multilinestring.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_multipoint.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_multipolygon.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_decimal.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_hash.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_coords.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/tests/geometry/test_linestring.py -> build/lib.linux-s390x-cpython-311/shapely/tests/geometry copying shapely/_pygeos_api.pxd -> build/lib.linux-s390x-cpython-311/shapely copying shapely/_geos.pxd -> build/lib.linux-s390x-cpython-311/shapely UPDATING build/lib.linux-s390x-cpython-311/shapely/_version.py set build/lib.linux-s390x-cpython-311/shapely/_version.py to '2.0.1' running build_ext building 'shapely.lib' extension creating build/temp.linux-s390x-cpython-311 creating build/temp.linux-s390x-cpython-311/src gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/c_api.c -o build/temp.linux-s390x-cpython-311/src/c_api.o gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/coords.c -o build/temp.linux-s390x-cpython-311/src/coords.o gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/geos.c -o build/temp.linux-s390x-cpython-311/src/geos.o gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/lib.c -o build/temp.linux-s390x-cpython-311/src/lib.o gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/pygeom.c -o build/temp.linux-s390x-cpython-311/src/pygeom.o gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/strtree.c -o build/temp.linux-s390x-cpython-311/src/strtree.o In file included from src/strtree.c:18: src/strtree.c: In function 'query_nearest_distance_callback': src/kvec.h:61:25: warning: value computed is not used [-Wunused-value] 61 | #define kv_pop(v) ((v).a[--(v).n]) | ~~~~~~^~~~~~~~~~ src/strtree.c:557:7: note: in expansion of macro 'kv_pop' 557 | kv_pop(*(params->dist_pairs)); | ^~~~~~ gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/ufuncs.c -o build/temp.linux-s390x-cpython-311/src/ufuncs.o src/ufuncs.c: In function 'Ydd_b_p_func': src/ufuncs.c:446:23: warning: passing argument 2 of 'func' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 446 | ret = func(ctx, prepared_geom_tmp, geom); | ^~~~~~~~~~~~~~~~~ src/ufuncs.c:446:23: note: expected 'void *' but argument is of type 'const GEOSPreparedGeometry *' {aka 'const struct GEOSPrepGeom_t *'} src/ufuncs.c: In function 'Y_i_func': src/ufuncs.c:1192:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1192 | int errcode = (int)((int**)data)[1]; | ^ src/ufuncs.c:1193:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1193 | int none_value = (int)((int**)data)[2]; | ^ src/ufuncs.c: In function 'polygonize_func': src/ufuncs.c:2205:51: warning: passing argument 2 of 'GEOSPolygonize_r' from incompatible pointer type [-Wincompatible-pointer-types] 2205 | GEOSGeometry* ret_ptr = GEOSPolygonize_r(ctx, geoms, n_geoms); | ^~~~~ | | | GEOSGeometry ** {aka struct GEOSGeom_t **} In file included from src/geos.h:15, from src/ufuncs.c:16: /usr/include/geos_c.h:926:31: note: expected 'const GEOSGeometry * const*' {aka 'const struct GEOSGeom_t * const*'} but argument is of type 'GEOSGeometry **' {aka 'struct GEOSGeom_t **'} 926 | const GEOSGeometry *const geoms[], | ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ In file included from src/ufuncs.c:15: src/ufuncs.c: In function 'linestrings_func': src/fast_loop_macros.h:83:21: warning: unused variable 'i_c2' [-Wunused-variable] 83 | npy_intp i, i_c1, i_c2; \ | ^~~~ src/ufuncs.c:2533:3: note: in expansion of macro 'DOUBLE_COREDIM_LOOP_OUTER' 2533 | DOUBLE_COREDIM_LOOP_OUTER { | ^~~~~~~~~~~~~~~~~~~~~~~~~ src/fast_loop_macros.h:83:15: warning: unused variable 'i_c1' [-Wunused-variable] 83 | npy_intp i, i_c1, i_c2; \ | ^~~~ src/ufuncs.c:2533:3: note: in expansion of macro 'DOUBLE_COREDIM_LOOP_OUTER' 2533 | DOUBLE_COREDIM_LOOP_OUTER { | ^~~~~~~~~~~~~~~~~~~~~~~~~ src/fast_loop_macros.h:80:47: warning: unused variable 'cp2' [-Wunused-variable] 80 | char *ip1 = args[0], *op1 = args[1], *cp1, *cp2; \ | ^~~ src/ufuncs.c:2533:3: note: in expansion of macro 'DOUBLE_COREDIM_LOOP_OUTER' 2533 | DOUBLE_COREDIM_LOOP_OUTER { | ^~~~~~~~~~~~~~~~~~~~~~~~~ src/fast_loop_macros.h:80:41: warning: unused variable 'cp1' [-Wunused-variable] 80 | char *ip1 = args[0], *op1 = args[1], *cp1, *cp2; \ | ^~~ src/ufuncs.c:2533:3: note: in expansion of macro 'DOUBLE_COREDIM_LOOP_OUTER' 2533 | DOUBLE_COREDIM_LOOP_OUTER { | ^~~~~~~~~~~~~~~~~~~~~~~~~ src/ufuncs.c: In function 'linearrings_func': src/fast_loop_macros.h:83:15: warning: unused variable 'i_c1' [-Wunused-variable] 83 | npy_intp i, i_c1, i_c2; \ | ^~~~ src/ufuncs.c:2588:3: note: in expansion of macro 'DOUBLE_COREDIM_LOOP_OUTER' 2588 | DOUBLE_COREDIM_LOOP_OUTER { | ^~~~~~~~~~~~~~~~~~~~~~~~~ src/ufuncs.c: In function 'bounds_func': src/ufuncs.c:2874:7: warning: unused variable 'size' [-Wunused-variable] 2874 | int size; | ^~~~ src/ufuncs.c:2873:28: warning: unused variable 'coord_seq' [-Wunused-variable] 2873 | const GEOSCoordSequence* coord_seq; | ^~~~~~~~~ src/ufuncs.c:2872:23: warning: unused variable 'ring' [-Wunused-variable] 2872 | const GEOSGeometry* ring; | ^~~~ gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c src/vector.c -o build/temp.linux-s390x-cpython-311/src/vector.o gcc -shared -Wl,--as-needed,-O1,--sort-common -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security build/temp.linux-s390x-cpython-311/src/c_api.o build/temp.linux-s390x-cpython-311/src/coords.o build/temp.linux-s390x-cpython-311/src/geos.o build/temp.linux-s390x-cpython-311/src/lib.o build/temp.linux-s390x-cpython-311/src/pygeom.o build/temp.linux-s390x-cpython-311/src/strtree.o build/temp.linux-s390x-cpython-311/src/ufuncs.o build/temp.linux-s390x-cpython-311/src/vector.o -L/usr/lib -L/usr/lib -lgeos_c -o build/lib.linux-s390x-cpython-311/shapely/lib.cpython-311-s390x-linux-musl.so building 'shapely._geometry_helpers' extension creating build/temp.linux-s390x-cpython-311/shapely gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -DGEOS_USE_ONLY_R_API -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c shapely/_geometry_helpers.c -o build/temp.linux-s390x-cpython-311/shapely/_geometry_helpers.o In file included from /usr/lib/python3.11/site-packages/numpy/core/include/numpy/ndarraytypes.h:1940, from /usr/lib/python3.11/site-packages/numpy/core/include/numpy/ndarrayobject.h:12, from /usr/lib/python3.11/site-packages/numpy/core/include/numpy/arrayobject.h:5, from shapely/_geometry_helpers.c:780: /usr/lib/python3.11/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:17:2: warning: #warning "Using deprecated NumPy API, disable it with " "#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] 17 | #warning "Using deprecated NumPy API, disable it with " \ | ^~~~~~~ gcc -shared -Wl,--as-needed,-O1,--sort-common -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security build/temp.linux-s390x-cpython-311/shapely/_geometry_helpers.o -L/usr/lib -L/usr/lib -lgeos_c -o build/lib.linux-s390x-cpython-311/shapely/_geometry_helpers.cpython-311-s390x-linux-musl.so building 'shapely._geos' extension gcc -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security -fPIC -DGEOS_USE_ONLY_R_API -I./src -I/usr/include -I/usr/include/python3.11 -I/usr/lib/python3.11/site-packages/numpy/core/include -c shapely/_geos.c -o build/temp.linux-s390x-cpython-311/shapely/_geos.o gcc -shared -Wl,--as-needed,-O1,--sort-common -Os -Wformat -Werror=format-security -Os -Wformat -Werror=format-security build/temp.linux-s390x-cpython-311/shapely/_geos.o -L/usr/lib -L/usr/lib -lgeos_c -o build/lib.linux-s390x-cpython-311/shapely/_geos.cpython-311-s390x-linux-musl.so /usr/lib/python3.11/site-packages/setuptools/config/pyprojecttoml.py:66: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*. config = read_configuration(filepath, True, ignore_option_errors, dist) running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. /usr/lib/python3.11/site-packages/setuptools/command/test.py:194: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated. !! ******************************************************************************** Requirements should be satisfied by a PEP 517 installer. If you are using pip, you can try `pip install --use-pep517`. ******************************************************************************** !! ir_d = dist.fetch_build_eggs(dist.install_requires) WARNING: The wheel package is not available. /usr/lib/python3.11/site-packages/setuptools/command/test.py:195: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated. !! ******************************************************************************** Requirements should be satisfied by a PEP 517 installer. If you are using pip, you can try `pip install --use-pep517`. ******************************************************************************** !! tr_d = dist.fetch_build_eggs(dist.tests_require or []) WARNING: The wheel package is not available. /usr/lib/python3.11/site-packages/setuptools/command/test.py:196: _DeprecatedInstaller: setuptools.installer and fetch_build_eggs are deprecated. !! ******************************************************************************** Requirements should be satisfied by a PEP 517 installer. If you are using pip, you can try `pip install --use-pep517`. ******************************************************************************** !! er_d = dist.fetch_build_eggs( WARNING: The wheel package is not available. running egg_info writing shapely.egg-info/PKG-INFO writing dependency_links to shapely.egg-info/dependency_links.txt writing requirements to shapely.egg-info/requires.txt writing top-level names to shapely.egg-info/top_level.txt reading manifest file 'shapely.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'shapely.egg-info/SOURCES.txt' running build_ext copying build/lib.linux-s390x-cpython-311/shapely/lib.cpython-311-s390x-linux-musl.so -> shapely copying build/lib.linux-s390x-cpython-311/shapely/_geometry_helpers.cpython-311-s390x-linux-musl.so -> shapely copying build/lib.linux-s390x-cpython-311/shapely/_geos.cpython-311-s390x-linux-musl.so -> shapely test_lines (tests.test_delaunay.DelaunayTriangulation.test_lines) ... ok test_point (tests.test_delaunay.DelaunayTriangulation.test_point) ... ok test_polys (tests.test_delaunay.DelaunayTriangulation.test_polys) ... ok test_cell_sorting (tests.test_polylabel.PolylabelTestCase.test_cell_sorting) Tests rich comparison operators of Cells for use in the polylabel ... ok test_concave_polygon (tests.test_polylabel.PolylabelTestCase.test_concave_polygon) Finds pole of inaccessibility for a concave polygon and ensures that ... ok test_invalid_polygon (tests.test_polylabel.PolylabelTestCase.test_invalid_polygon) Makes sure that the polylabel function throws an exception when provided ... ok test_polygon_with_hole (tests.test_polylabel.PolylabelTestCase.test_polygon_with_hole) Finds pole of inaccessibility for a polygon with a hole ... ok test_polylabel (tests.test_polylabel.PolylabelTestCase.test_polylabel) Finds pole of inaccessibility for a polygon with a tolerance of 10 ... ok test_rectangle_special_case (tests.test_polylabel.PolylabelTestCase.test_rectangle_special_case) The centroid algorithm used is vulnerable to floating point errors ... ok test_nearest (tests.test_nearest.Nearest.test_nearest) ... ok test_invalid_intersection (tests.test_invalid_geometries.InvalidGeometriesTestCase.test_invalid_intersection) ... ok test_polygonize (tests.test_polygonize.PolygonizeTestCase.test_polygonize) ... ok test_polygonize_full (tests.test_polygonize.PolygonizeTestCase.test_polygonize_full) ... ok test_linemerge (tests.test_linemerge.LineMergeTestCase.test_linemerge) ... ok test_binary_predicate_exceptions (tests.test_predicates.PredicatesTestCase.test_binary_predicate_exceptions) ... ok test_binary_predicates (tests.test_predicates.PredicatesTestCase.test_binary_predicates) ... ok test_relate_pattern (tests.test_predicates.PredicatesTestCase.test_relate_pattern) ... ok test_unary_predicates (tests.test_predicates.PredicatesTestCase.test_unary_predicates) ... ok test_geometrycollection (tests.test_orient.OrientTestCase.test_geometrycollection) ... ok test_linearring (tests.test_orient.OrientTestCase.test_linearring) ... ok test_linestring (tests.test_orient.OrientTestCase.test_linestring) ... ok test_multilinestring (tests.test_orient.OrientTestCase.test_multilinestring) ... ok test_multipoint (tests.test_orient.OrientTestCase.test_multipoint) ... ok test_multipolygon (tests.test_orient.OrientTestCase.test_multipolygon) ... ok test_point (tests.test_orient.OrientTestCase.test_point) ... ok test_polygon (tests.test_orient.OrientTestCase.test_polygon) ... ok test_geointerface (tests.test_geointerface.GeoInterfaceTestCase.test_geointerface) ... ok test_polygon_3 (tests.test_singularity.PolygonTestCase.test_polygon_3) ... ok test_polygon_5 (tests.test_singularity.PolygonTestCase.test_polygon_5) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitClosedRing.test_split_closed_line_with_point) ... ok test_split_closed_ring_with_point (tests.test_split.TestSplitClosedRing.test_split_closed_ring_with_point) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitGeometry.test_split_closed_line_with_point) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitLine.test_split_closed_line_with_point) ... ok test_split_line_with_line (tests.test_split.TestSplitLine.test_split_line_with_line) ... ok test_split_line_with_multiline (tests.test_split.TestSplitLine.test_split_line_with_multiline) ... ok test_split_line_with_multipoint (tests.test_split.TestSplitLine.test_split_line_with_multipoint) ... ok test_split_line_with_multipolygon (tests.test_split.TestSplitLine.test_split_line_with_multipolygon) ... ok test_split_line_with_point (tests.test_split.TestSplitLine.test_split_line_with_point) ... ok test_split_line_with_polygon (tests.test_split.TestSplitLine.test_split_line_with_polygon) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitMulti.test_split_closed_line_with_point) ... ok test_split_multiline_with_multipoint (tests.test_split.TestSplitMulti.test_split_multiline_with_multipoint) ... ok test_split_multiline_with_point (tests.test_split.TestSplitMulti.test_split_multiline_with_point) ... ok test_split_multipolygon_with_line (tests.test_split.TestSplitMulti.test_split_multipolygon_with_line) ... ok test_split_closed_line_with_point (tests.test_split.TestSplitPolygon.test_split_closed_line_with_point) ... ok test_split_poly_with_line (tests.test_split.TestSplitPolygon.test_split_poly_with_line) ... ok test_split_poly_with_other (tests.test_split.TestSplitPolygon.test_split_poly_with_other) ... ok test_wkt_locale (tests.test_locale.LocaleTestCase.test_wkt_locale) ... ok test_linestring (tests.test_ndarrays.TransposeTestCase.test_linestring) ... ok test_multipoint (tests.test_ndarrays.TransposeTestCase.test_multipoint) ... ok test_polygon (tests.test_ndarrays.TransposeTestCase.test_polygon) ... ok test_empty (tests.test_transform.IdentityTestCase.test_empty) ... ok test_line (tests.test_transform.IdentityTestCase.test_line) ... ok test_linearring (tests.test_transform.IdentityTestCase.test_linearring) ... ok test_multipolygon (tests.test_transform.IdentityTestCase.test_multipolygon) ... ok test_point (tests.test_transform.IdentityTestCase.test_point) ... ok test_polygon (tests.test_transform.IdentityTestCase.test_polygon) ... ok test_line (tests.test_transform.LambdaTestCase.test_line) ... ok test_multipolygon (tests.test_transform.LambdaTestCase.test_multipolygon) ... ok test_point (tests.test_transform.LambdaTestCase.test_point) ... ok test_polygon (tests.test_transform.LambdaTestCase.test_polygon) ... ok test_array_2d (tests.test_vectorized.VectorizedContainsTestCase.test_array_2d) ... ok test_array_dtype (tests.test_vectorized.VectorizedContainsTestCase.test_array_dtype) ... ok test_contains_linestring (tests.test_vectorized.VectorizedContainsTestCase.test_contains_linestring) ... ok test_contains_multipoly (tests.test_vectorized.VectorizedContainsTestCase.test_contains_multipoly) ... ok test_contains_point (tests.test_vectorized.VectorizedContainsTestCase.test_contains_point) ... ok test_contains_poly (tests.test_vectorized.VectorizedContainsTestCase.test_contains_poly) ... ok test_shapely_xy_attr_contains (tests.test_vectorized.VectorizedContainsTestCase.test_shapely_xy_attr_contains) ... ok test_x_array_order (tests.test_vectorized.VectorizedContainsTestCase.test_x_array_order) ... ok test_xy_array_order (tests.test_vectorized.VectorizedContainsTestCase.test_xy_array_order) ... ok test_y_array_order (tests.test_vectorized.VectorizedContainsTestCase.test_y_array_order) ... ok test_touches (tests.test_vectorized.VectorizedTouchesTestCase.test_touches) ... ok test_raise_type_error (tests.test_substring.SubstringTestCase.test_raise_type_error) ... ok test_return_endpoint (tests.test_substring.SubstringTestCase.test_return_endpoint) ... ok test_return_endsubstring (tests.test_substring.SubstringTestCase.test_return_endsubstring) ... ok test_return_endsubstring_reversed (tests.test_substring.SubstringTestCase.test_return_endsubstring_reversed) ... ok test_return_midpoint (tests.test_substring.SubstringTestCase.test_return_midpoint) ... ok test_return_midsubstring (tests.test_substring.SubstringTestCase.test_return_midsubstring) ... ok test_return_midsubstring_reversed (tests.test_substring.SubstringTestCase.test_return_midsubstring_reversed) ... ok test_return_startpoint (tests.test_substring.SubstringTestCase.test_return_startpoint) ... ok test_return_startsubstring (tests.test_substring.SubstringTestCase.test_return_startsubstring) ... ok test_return_startsubstring_reversed (tests.test_substring.SubstringTestCase.test_return_startsubstring_reversed) ... ok test_return_substring_issue682 (tests.test_substring.SubstringTestCase.test_return_substring_issue682) ... ok test_return_substring_issue848 (tests.test_substring.SubstringTestCase.test_return_substring_issue848) ... ok test_return_substring_with_vertices (tests.test_substring.SubstringTestCase.test_return_substring_with_vertices) ... ok test_collection (tests.test_svg.SvgTestCase.test_collection) ... ok test_linestring (tests.test_svg.SvgTestCase.test_linestring) ... ok test_multilinestring (tests.test_svg.SvgTestCase.test_multilinestring) ... ok test_multipoint (tests.test_svg.SvgTestCase.test_multipoint) ... ok test_multipolygon (tests.test_svg.SvgTestCase.test_multipolygon) ... ok test_point (tests.test_svg.SvgTestCase.test_point) ... ok test_polygon (tests.test_svg.SvgTestCase.test_polygon) ... ok test_ccw (tests.test_box.BoxTestCase.test_ccw) ... ok test_ccw_default (tests.test_box.BoxTestCase.test_ccw_default) ... ok test_cw (tests.test_box.BoxTestCase.test_cw) ... ok test_buffer_style (tests.test_buffer.BufferTests.test_buffer_style) ... ok test_cap_style (tests.test_buffer.BufferTests.test_cap_style) ... ok test_empty (tests.test_buffer.BufferTests.test_empty) ... ok test_enum_values (tests.test_buffer.BufferTests.test_enum_values) ... ok test_line (tests.test_buffer.BufferTests.test_line) ... ok test_line_single_sideded_left (tests.test_buffer.BufferTests.test_line_single_sideded_left) ... ok test_line_single_sideded_right (tests.test_buffer.BufferTests.test_line_single_sideded_right) ... ok test_point (tests.test_buffer.BufferTests.test_point) ... ok test_point_single_sidedd (tests.test_buffer.BufferTests.test_point_single_sidedd) ... ok test_polygon (tests.test_buffer.BufferTests.test_polygon) ... ok test_polygon_single_sideded (tests.test_buffer.BufferTests.test_polygon_single_sideded) ... ok test_line_intersection (tests.test_products_z.ProductZTestCase.test_line_intersection) ... ok test_affine_2d (tests.test_affinity.AffineTestCase.test_affine_2d) ... ok test_affine_3d (tests.test_affinity.AffineTestCase.test_affine_3d) ... ok test_affine_geom_types (tests.test_affinity.AffineTestCase.test_affine_geom_types) ... ok test_affine_params (tests.test_affinity.AffineTestCase.test_affine_params) ... ok test_rotate (tests.test_affinity.TransformOpsTestCase.test_rotate) ... ok test_rotate_angle_array (tests.test_affinity.TransformOpsTestCase.test_rotate_angle_array) ... ok test_rotate_empty (tests.test_affinity.TransformOpsTestCase.test_rotate_empty) ... ok test_scale (tests.test_affinity.TransformOpsTestCase.test_scale) ... ok test_scale_empty (tests.test_affinity.TransformOpsTestCase.test_scale_empty) ... ok test_skew (tests.test_affinity.TransformOpsTestCase.test_skew) ... ok test_skew_empty (tests.test_affinity.TransformOpsTestCase.test_skew_empty) ... ok test_skew_xs_ys_array (tests.test_affinity.TransformOpsTestCase.test_skew_xs_ys_array) ... ok test_translate (tests.test_affinity.TransformOpsTestCase.test_translate) ... ok test_translate_empty (tests.test_affinity.TransformOpsTestCase.test_translate_empty) ... ok test_empty_polygon (tests.test_mapping.MappingTestCase.test_empty_polygon) Empty polygons will round trip without error ... ok test_point (tests.test_mapping.MappingTestCase.test_point) ... ok test_alias_interpolate (tests.test_linear_referencing.LinearReferencingTestCase.test_alias_interpolate) ... ok test_alias_project (tests.test_linear_referencing.LinearReferencingTestCase.test_alias_project) ... ok test_line1_interpolate (tests.test_linear_referencing.LinearReferencingTestCase.test_line1_interpolate) ... ok test_line1_project (tests.test_linear_referencing.LinearReferencingTestCase.test_line1_project) ... ok test_line2_interpolate (tests.test_linear_referencing.LinearReferencingTestCase.test_line2_interpolate) ... ok test_line2_project (tests.test_linear_referencing.LinearReferencingTestCase.test_line2_project) ... ok test_line_ends_interpolate (tests.test_linear_referencing.LinearReferencingTestCase.test_line_ends_interpolate) ... ok test_multiline_interpolate (tests.test_linear_referencing.LinearReferencingTestCase.test_multiline_interpolate) ... ok test_multiline_project (tests.test_linear_referencing.LinearReferencingTestCase.test_multiline_project) ... ok test_not_on_line_project (tests.test_linear_referencing.LinearReferencingTestCase.test_not_on_line_project) ... ok test_not_supported_project (tests.test_linear_referencing.LinearReferencingTestCase.test_not_supported_project) ... ok test_hausdorff_distance (tests.test_operations.OperationsTestCase.test_hausdorff_distance) ... ok test_interpolate (tests.test_operations.OperationsTestCase.test_interpolate) ... ok test_normalize (tests.test_operations.OperationsTestCase.test_normalize) ... ok test_operations (tests.test_operations.OperationsTestCase.test_operations) ... ok test_relate (tests.test_operations.OperationsTestCase.test_relate) ... ok test_pickle (tests.test_persist.PersistTestCase.test_pickle) ... ok test_wkb (tests.test_persist.PersistTestCase.test_wkb) ... ok test_wkb_dumps_endianness (tests.test_persist.PersistTestCase.test_wkb_dumps_endianness) ... ok test_wkt (tests.test_persist.PersistTestCase.test_wkt) ... ok test_snap (tests.test_snap.Snap.test_snap) ... ok test_valid (tests.test_validation.ValidationTestCase.test_valid) ... ok test_shared_paths_forward (tests.test_shared_paths.SharedPaths.test_shared_paths_forward) ... ok test_shared_paths_forward2 (tests.test_shared_paths.SharedPaths.test_shared_paths_forward2) ... ok test_wrong_type (tests.test_shared_paths.SharedPaths.test_wrong_type) ... ok test_parallel_offset_linear_ring (tests.test_parallel_offset.OperationsTestCase.test_parallel_offset_linear_ring) ... ok test_parallel_offset_linestring (tests.test_parallel_offset.OperationsTestCase.test_parallel_offset_linestring) ... ok test_holes (tests.test_cga.PolygonOrienterTestCase.test_holes) ... ok test_no_holes (tests.test_cga.PolygonOrienterTestCase.test_no_holes) ... ok test_ccw (tests.test_cga.RingOrientationTestCase.test_ccw) ... ok test_cw (tests.test_cga.RingOrientationTestCase.test_cw) ... ok test_square (tests.test_cga.SignedAreaTestCase.test_square) ... ok test_triangle (tests.test_cga.SignedAreaTestCase.test_triangle) ... ok test_linestring (tests.test_operators.OperatorsTestCase.test_linestring) ... ok test_multipoint (tests.test_operators.OperatorsTestCase.test_multipoint) ... ok test_point (tests.test_operators.OperatorsTestCase.test_point) ... ok test_polygon (tests.test_operators.OperatorsTestCase.test_polygon) ... ok test_cascaded_union (tests.test_union.UnionTestCase.test_cascaded_union) ... ok test_unary_union (tests.test_union.UnionTestCase.test_unary_union) ... ok test_unary_union_multi (tests.test_union.UnionTestCase.test_unary_union_multi) ... ok ---------------------------------------------------------------------- Ran 162 tests in 0.330s OK Python version: 3.11.3 (main, Apr 18 2023, 19:33:01) [GCC 12.2.1 20220924] GEOS version: 3.11.2-CAPI-1.17.2 Numpy version: 1.24.3 >>> py3-shapely: Entering fakeroot... /usr/lib/python3.11/site-packages/setuptools/config/pyprojecttoml.py:66: _BetaConfiguration: Support for `[tool.setuptools]` in `pyproject.toml` is still *beta*. config = read_configuration(filepath, True, ignore_option_errors, dist) running install /usr/lib/python3.11/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer, pypa/build or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running install_lib creating /home/buildozer/aports/community/py3-shapely/pkg creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11 creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_geos.cpython-311-s390x-linux-musl.so -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/wkb.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/testing.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_version.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/strtree.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/coords.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/coordinates.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/plotting.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/io.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/linear.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_geometry.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/affinity.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/wkt.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/prepared.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/errors.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_geometry_helpers.cpython-311-s390x-linux-musl.so -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/creation.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/decorators.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/speedups.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/vectorized copying build/lib.linux-s390x-cpython-311/shapely/vectorized/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/vectorized copying build/lib.linux-s390x-cpython-311/shapely/constructive.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms copying build/lib.linux-s390x-cpython-311/shapely/algorithms/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms copying build/lib.linux-s390x-cpython-311/shapely/algorithms/cga.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms copying build/lib.linux-s390x-cpython-311/shapely/algorithms/polylabel.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms copying build/lib.linux-s390x-cpython-311/shapely/set_operations.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_enum.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/lib.cpython-311-s390x-linux-musl.so -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_constructive.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_creation_indices.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/common.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_io.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_predicates.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_creation.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_geometry.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_misc.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_linear.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_set_operations.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_plotting.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_ragged_array.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_measurement.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_testing.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_multi.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_polygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_geometry_base.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_format.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_point.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_emptiness.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_collection.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_multilinestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_multipoint.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_multipolygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_decimal.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_hash.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_coords.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/geometry/test_linestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry copying build/lib.linux-s390x-cpython-311/shapely/tests/test_coordinates.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/tests/test_strtree.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests copying build/lib.linux-s390x-cpython-311/shapely/measurement.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/ops.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_pygeos_api.pxd -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely creating /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/multipoint.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/__init__.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/polygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/linestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/multipolygon.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/geo.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/point.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/base.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/collection.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/conftest.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geometry/multilinestring.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry copying build/lib.linux-s390x-cpython-311/shapely/geos.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/validation.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_geos.pxd -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/_ragged_array.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely copying build/lib.linux-s390x-cpython-311/shapely/predicates.py -> /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/wkb.py to wkb.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/testing.py to testing.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/_version.py to _version.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/strtree.py to strtree.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/coords.py to coords.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/coordinates.py to coordinates.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/plotting.py to plotting.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/io.py to io.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/linear.py to linear.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/_geometry.py to _geometry.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/affinity.py to affinity.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/wkt.py to wkt.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/prepared.py to prepared.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/errors.py to errors.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/creation.py to creation.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/decorators.py to decorators.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/speedups.py to speedups.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/vectorized/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/constructive.py to constructive.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms/cga.py to cga.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms/polylabel.py to polylabel.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/set_operations.py to set_operations.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/_enum.py to _enum.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_constructive.py to test_constructive.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_creation_indices.py to test_creation_indices.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/common.py to common.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_io.py to test_io.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_predicates.py to test_predicates.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_creation.py to test_creation.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_geometry.py to test_geometry.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_misc.py to test_misc.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_linear.py to test_linear.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_set_operations.py to test_set_operations.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_plotting.py to test_plotting.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_ragged_array.py to test_ragged_array.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_measurement.py to test_measurement.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_testing.py to test_testing.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_multi.py to test_multi.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_polygon.py to test_polygon.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_geometry_base.py to test_geometry_base.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_format.py to test_format.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_point.py to test_point.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_emptiness.py to test_emptiness.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_collection.py to test_collection.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_multilinestring.py to test_multilinestring.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_multipoint.py to test_multipoint.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_multipolygon.py to test_multipolygon.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_decimal.py to test_decimal.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_hash.py to test_hash.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_coords.py to test_coords.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/geometry/test_linestring.py to test_linestring.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_coordinates.py to test_coordinates.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/tests/test_strtree.py to test_strtree.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/measurement.py to measurement.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/ops.py to ops.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/multipoint.py to multipoint.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/__init__.py to __init__.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/polygon.py to polygon.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/linestring.py to linestring.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/multipolygon.py to multipolygon.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/geo.py to geo.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/point.py to point.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/base.py to base.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/collection.py to collection.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/conftest.py to conftest.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/multilinestring.py to multilinestring.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geos.py to geos.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/validation.py to validation.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/_ragged_array.py to _ragged_array.cpython-311.pyc byte-compiling /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/predicates.py to predicates.cpython-311.pyc running install_egg_info running egg_info writing shapely.egg-info/PKG-INFO writing dependency_links to shapely.egg-info/dependency_links.txt writing requirements to shapely.egg-info/requires.txt writing top-level names to shapely.egg-info/top_level.txt reading manifest file 'shapely.egg-info/SOURCES.txt' adding license file 'LICENSE.txt' writing manifest file 'shapely.egg-info/SOURCES.txt' Copying shapely.egg-info to /home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely-2.0.1-py3.11.egg-info running install_scripts >>> py3-shapely-pyc*: Running split function pyc... '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/__pycache__' -> '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely-pyc/usr/lib/python3.11/site-packages/shapely/__pycache__' '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/vectorized/__pycache__' -> '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely-pyc/usr/lib/python3.11/site-packages/shapely/vectorized/__pycache__' '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/algorithms/__pycache__' -> '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely-pyc/usr/lib/python3.11/site-packages/shapely/algorithms/__pycache__' '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely/usr/lib/python3.11/site-packages/shapely/geometry/__pycache__' -> '/home/buildozer/aports/community/py3-shapely/pkg/py3-shapely-pyc/usr/lib/python3.11/site-packages/shapely/geometry/__pycache__' >>> py3-shapely-pyc*: Preparing subpackage py3-shapely-pyc... >>> py3-shapely-pyc*: Running postcheck for py3-shapely-pyc >>> py3-shapely*: Running postcheck for py3-shapely >>> py3-shapely*: Preparing package py3-shapely... >>> py3-shapely*: Stripping binaries >>> py3-shapely-pyc*: Scanning shared objects >>> py3-shapely*: Scanning shared objects >>> py3-shapely-pyc*: Tracing dependencies... py3-numpy python3~3.11 >>> py3-shapely-pyc*: Package size: 572.0 KB >>> py3-shapely-pyc*: Compressing data... >>> py3-shapely-pyc*: Create checksum... >>> py3-shapely-pyc*: Create py3-shapely-pyc-2.0.1-r3.apk >>> py3-shapely*: Tracing dependencies... py3-numpy python3~3.11 so:libc.musl-s390x.so.1 so:libgeos_c.so.1 >>> py3-shapely*: Package size: 868.0 KB >>> py3-shapely*: Compressing data... >>> py3-shapely*: Create checksum... >>> py3-shapely*: Create py3-shapely-2.0.1-r3.apk >>> py3-shapely: Build complete at Sat, 29 Apr 2023 16:20:08 +0000 elapsed time 0h 0m 15s >>> py3-shapely: Cleaning up srcdir >>> py3-shapely: Cleaning up pkgdir >>> py3-shapely: Uninstalling dependencies... (1/84) Purging .makedepends-py3-shapely (20230429.161954) (2/84) Purging geos-dev (3.11.2-r0) (3/84) Purging geos (3.11.2-r0) (4/84) Purging py3-matplotlib-pyc (3.7.1-r0) (5/84) Purging py3-matplotlib (3.7.1-r0) (6/84) Purging py3-cairo-pyc (1.23.0-r4) (7/84) Purging py3-cairo (1.23.0-r4) (8/84) Purging py3-certifi-pyc (2022.12.7-r2) (9/84) Purging py3-certifi (2022.12.7-r2) (10/84) Purging py3-contourpy-pyc (1.0.7-r1) (11/84) Purging py3-contourpy (1.0.7-r1) (12/84) Purging py3-cycler-pyc (0.11.0-r2) (13/84) Purging py3-cycler (0.11.0-r2) (14/84) Purging py3-dateutil-pyc (2.8.2-r3) (15/84) Purging py3-dateutil (2.8.2-r3) (16/84) Purging py3-six-pyc (1.16.0-r6) (17/84) Purging py3-six (1.16.0-r6) (18/84) Purging py3-fonttools-pyc (4.39.3-r1) (19/84) Purging py3-fonttools (4.39.3-r1) (20/84) Purging py3-kiwisolver-pyc (1.4.4-r1) (21/84) Purging py3-kiwisolver (1.4.4-r1) (22/84) Purging py3-pillow-pyc (9.5.0-r1) (23/84) Purging py3-pillow (9.5.0-r1) (24/84) Purging py3-tz-pyc (2023.3-r1) (25/84) Purging py3-tz (2023.3-r1) (26/84) Purging python3-tkinter-pyc (3.11.3-r1) (27/84) Purging python3-tkinter (3.11.3-r1) (28/84) Purging py3-numpy-dev (1.24.3-r0) (29/84) Purging py3-numpy-pyc (1.24.3-r0) (30/84) Purging py3-numpy (1.24.3-r0) (31/84) Purging openblas (0.3.23-r0) (32/84) Purging py3-setuptools-pyc (67.7.2-r0) (33/84) Purging py3-setuptools (67.7.2-r0) (34/84) Purging python3-dev (3.11.3-r10) (35/84) Purging cython-pyc (0.29.34-r2) (36/84) Purging cython (0.29.34-r2) (37/84) Purging py3-pytest-pyc (7.3.1-r1) (38/84) Purging py3-pytest (7.3.1-r1) (39/84) Purging py3-iniconfig-pyc (1.1.1-r6) (40/84) Purging py3-iniconfig (1.1.1-r6) (41/84) Purging py3-packaging-pyc (23.1-r1) (42/84) Purging py3-packaging (23.1-r1) (43/84) Purging py3-parsing-pyc (3.0.9-r2) (44/84) Purging py3-parsing (3.0.9-r2) (45/84) Purging py3-pluggy-pyc (1.0.0-r3) (46/84) Purging py3-pluggy (1.0.0-r3) (47/84) Purging py3-py-pyc (1.11.0-r2) (48/84) Purging py3-py (1.11.0-r2) (49/84) Purging cairo (1.17.8-r1) (50/84) Purging lcms2 (2.15-r1) (51/84) Purging libgfortran (12.2.1_git20220924-r10) (52/84) Purging libxext (1.3.5-r1) (53/84) Purging openjpeg (2.5.0-r3) (54/84) Purging pixman (0.42.2-r1) (55/84) Purging python3-pyc (3.11.3-r10) (56/84) Purging python3-pycache-pyc0 (3.11.3-r10) (57/84) Purging pyc (0.1-r0) (58/84) Purging qhull (2020.2-r2) (59/84) Purging tiff (4.5.0-r6) (60/84) Purging tk (8.6.13-r1) (61/84) Purging libxft (2.3.8-r0) (62/84) Purging fontconfig (2.14.2-r3) (63/84) Purging freetype (2.13.0-r5) (64/84) Purging python3 (3.11.3-r10) (65/84) Purging gdbm (1.23-r1) (66/84) Purging libxrender (0.9.11-r2) (67/84) Purging libx11 (1.8.4-r2) (68/84) Purging libxcb (1.15-r1) (69/84) Purging libxdmcp (1.1.4-r1) (70/84) Purging libbsd (0.11.7-r1) (71/84) Purging libbz2 (1.0.8-r5) (72/84) Purging libffi (3.4.4-r2) (73/84) Purging libjpeg-turbo (2.1.5.1-r2) (74/84) Purging libmd (1.0.4-r2) (75/84) Purging libpanelw (6.4_p20230424-r0) (76/84) Purging libpng (1.6.39-r3) (77/84) Purging libwebp (1.3.0-r1) (78/84) Purging libxau (1.0.11-r1) (79/84) Purging mpdecimal (2.5.1-r2) (80/84) Purging readline (8.2.1-r1) (81/84) Purging sqlite-libs (3.41.2-r2) (82/84) Purging tcl (8.6.13-r1) (83/84) Purging tzdata (2023c-r1) (84/84) Purging xz-libs (5.4.2-r1) Executing busybox-1.36.0-r8.trigger OK: 371 MiB in 98 packages >>> py3-shapely: Updating the community/s390x repository index... >>> py3-shapely: Signing the index...