>>> xinput: Building community/xinput 1.6.4-r1 (using abuild 3.11.0_rc13-r0) started Fri, 05 May 2023 02:11:11 +0000
>>> xinput: Checking sanity of /home/buildozer/aports/community/xinput/APKBUILD...
>>> xinput: Analyzing dependencies...
>>> xinput: Installing for build: build-base libx11-dev libxext-dev libxi-dev libxinerama-dev libxrandr-dev util-macros
(1/40) Installing libxau (1.0.11-r2)
(2/40) Installing xorgproto (2022.2-r0)
(3/40) Installing libxau-dev (1.0.11-r2)
(4/40) Installing libbz2 (1.0.8-r5)
(5/40) Installing libffi (3.4.4-r2)
(6/40) Installing gdbm (1.23-r1)
(7/40) Installing xz-libs (5.4.2-r1)
(8/40) Installing mpdecimal (2.5.1-r2)
(9/40) Installing libpanelw (6.4_p20230429-r0)
(10/40) Installing readline (8.2.1-r1)
(11/40) Installing sqlite-libs (3.41.2-r2)
(12/40) Installing python3 (3.11.3-r10)
(13/40) Installing python3-pycache-pyc0 (3.11.3-r10)
(14/40) Installing pyc (0.1-r0)
(15/40) Installing xcb-proto-pyc (1.15.2-r2)
(16/40) Installing python3-pyc (3.11.3-r10)
(17/40) Installing xcb-proto (1.15.2-r2)
(18/40) Installing libmd (1.0.4-r2)
(19/40) Installing libbsd (0.11.7-r1)
(20/40) Installing libxdmcp (1.1.4-r2)
(21/40) Installing libxcb (1.15-r1)
(22/40) Installing libxdmcp-dev (1.1.4-r2)
(23/40) Installing libxcb-dev (1.15-r1)
(24/40) Installing xtrans (1.4.0-r3)
(25/40) Installing libx11 (1.8.4-r3)
(26/40) Installing libx11-dev (1.8.4-r3)
(27/40) Installing libxext (1.3.5-r2)
(28/40) Installing libxext-dev (1.3.5-r2)
(29/40) Installing libxi (1.8.1-r0)
(30/40) Installing libxfixes (6.0.1-r2)
(31/40) Installing libxfixes-dev (6.0.1-r2)
(32/40) Installing libxi-dev (1.8.1-r0)
(33/40) Installing libxinerama (1.1.5-r2)
(34/40) Installing libxinerama-dev (1.1.5-r2)
(35/40) Installing libxrender (0.9.11-r3)
(36/40) Installing libxrandr (1.5.3-r2)
(37/40) Installing libxrender-dev (0.9.11-r3)
(38/40) Installing libxrandr-dev (1.5.3-r2)
(39/40) Installing util-macros (1.20.0-r0)
(40/40) Installing .makedepends-xinput (20230505.021111)
Executing busybox-1.36.0-r8.trigger
OK: 423 MiB in 138 packages
>>> xinput: Cleaning up srcdir
>>> xinput: Cleaning up pkgdir
>>> xinput: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/xinput-1.6.4.tar.xz
>>> xinput: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/xinput-1.6.4.tar.xz
>>> xinput: Checking sha512sums...
xinput-1.6.4.tar.xz: OK
>>> xinput: Unpacking /var/cache/distfiles/v3.18/xinput-1.6.4.tar.xz...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports the include directive... yes (GNU style)
checking for s390x-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for gcc options needed to detect all undeclared functions... none needed
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for s390x-alpine-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... s390x-alpine-linux-musl
checking host system type... s390x-alpine-linux-musl
checking for a sed that does not truncate output... /bin/sed
checking if gcc supports -Werror=unknown-warning-option... no
checking if gcc supports -Werror=unused-command-line-argument... no
checking if gcc supports -Wall... yes
checking if gcc supports -Wpointer-arith... yes
checking if gcc supports -Wmissing-declarations... yes
checking if gcc supports -Wformat=2... yes
checking if gcc supports -Wstrict-prototypes... yes
checking if gcc supports -Wmissing-prototypes... yes
checking if gcc supports -Wnested-externs... yes
checking if gcc supports -Wbad-function-cast... yes
checking if gcc supports -Wold-style-definition... yes
checking if gcc supports -Wdeclaration-after-statement... yes
checking if gcc supports -Wunused... yes
checking if gcc supports -Wuninitialized... yes
checking if gcc supports -Wshadow... yes
checking if gcc supports -Wmissing-noreturn... yes
checking if gcc supports -Wmissing-format-attribute... yes
checking if gcc supports -Wredundant-decls... yes
checking if gcc supports -Wlogical-op... yes
checking if gcc supports -Werror=implicit... yes
checking if gcc supports -Werror=nonnull... yes
checking if gcc supports -Werror=init-self... yes
checking if gcc supports -Werror=main... yes
checking if gcc supports -Werror=missing-braces... yes
checking if gcc supports -Werror=sequence-point... yes
checking if gcc supports -Werror=return-type... yes
checking if gcc supports -Werror=trigraphs... yes
checking if gcc supports -Werror=array-bounds... yes
checking if gcc supports -Werror=write-strings... yes
checking if gcc supports -Werror=address... yes
checking if gcc supports -Werror=int-to-pointer-cast... yes
checking if gcc supports -Werror=pointer-to-int-cast... yes
checking if gcc supports -pedantic... yes
checking if gcc supports -Werror... yes
checking if gcc supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for XINPUT... yes
checking for XI2... yes
checking for XI21... yes
checking for XI22... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
Making all in src
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
  CC       buttonmap.o
  CC       feedback.o
  CC       list.o
  CC       setint.o
  CC       setmode.o
  CC       state.o
  CC       setptr.o
  CC       property.o
  CC       test.o
  CC       xinput.o
  CC       hierarchy.o
  CC       setcp.o
  CC       test_xi2.o
  CC       transform.o
  CCLD     xinput
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
Making all in man
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
  GEN      xinput.1
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
make[1]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
>>> xinput: Entering fakeroot...
Making install in src
make[1]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
make[2]: Nothing to be done for 'install-data-am'.
 .././install-sh -c -d '/home/buildozer/aports/community/xinput/pkg/xinput/usr/bin'
  /usr/bin/install -c xinput '/home/buildozer/aports/community/xinput/pkg/xinput/usr/bin'
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
make[1]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/src'
Making install in man
make[1]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
make[2]: Nothing to be done for 'install-exec-am'.
 .././install-sh -c -d '/home/buildozer/aports/community/xinput/pkg/xinput/usr/share/man/man1'
 /usr/bin/install -c -m 644 xinput.1 '/home/buildozer/aports/community/xinput/pkg/xinput/usr/share/man/man1'
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
make[1]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4/man'
make[1]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
make[2]: Entering directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
make[1]: Leaving directory '/home/buildozer/aports/community/xinput/src/xinput-1.6.4'
>>> xinput-doc*: Running split function doc...
>>> xinput-doc*: Preparing subpackage xinput-doc...
>>> xinput-doc*: Running postcheck for xinput-doc
>>> xinput*: Running postcheck for xinput
>>> xinput*: Preparing package xinput...
>>> xinput*: Stripping binaries
>>> xinput-doc*: Scanning shared objects
>>> xinput*: Scanning shared objects
>>> xinput-doc*: Tracing dependencies...
>>> xinput-doc*: Package size: 24.0 KB
>>> xinput-doc*: Compressing data...
>>> xinput-doc*: Create checksum...
>>> xinput-doc*: Create xinput-doc-1.6.4-r1.apk
>>> xinput*: Tracing dependencies...
	so:libX11.so.6
	so:libXi.so.6
	so:libXinerama.so.1
	so:libXrandr.so.2
	so:libc.musl-s390x.so.1
>>> xinput*: Package size: 64.0 KB
>>> xinput*: Compressing data...
>>> xinput*: Create checksum...
>>> xinput*: Create xinput-1.6.4-r1.apk
>>> xinput: Build complete at Fri, 05 May 2023 02:11:14 +0000 elapsed time 0h 0m 3s
>>> xinput: Cleaning up srcdir
>>> xinput: Cleaning up pkgdir
>>> xinput: Uninstalling dependencies...
(1/40) Purging .makedepends-xinput (20230505.021111)
(2/40) Purging libxi-dev (1.8.1-r0)
(3/40) Purging libxi (1.8.1-r0)
(4/40) Purging libxinerama-dev (1.1.5-r2)
(5/40) Purging libxinerama (1.1.5-r2)
(6/40) Purging libxrandr-dev (1.5.3-r2)
(7/40) Purging libxrandr (1.5.3-r2)
(8/40) Purging util-macros (1.20.0-r0)
(9/40) Purging libxext-dev (1.3.5-r2)
(10/40) Purging libxext (1.3.5-r2)
(11/40) Purging libxfixes-dev (6.0.1-r2)
(12/40) Purging libxfixes (6.0.1-r2)
(13/40) Purging libxrender-dev (0.9.11-r3)
(14/40) Purging libxrender (0.9.11-r3)
(15/40) Purging python3-pyc (3.11.3-r10)
(16/40) Purging python3-pycache-pyc0 (3.11.3-r10)
(17/40) Purging xcb-proto-pyc (1.15.2-r2)
(18/40) Purging pyc (0.1-r0)
(19/40) Purging libx11-dev (1.8.4-r3)
(20/40) Purging xtrans (1.4.0-r3)
(21/40) Purging libx11 (1.8.4-r3)
(22/40) Purging libxcb-dev (1.15-r1)
(23/40) Purging libxcb (1.15-r1)
(24/40) Purging xcb-proto (1.15.2-r2)
(25/40) Purging python3 (3.11.3-r10)
(26/40) Purging gdbm (1.23-r1)
(27/40) Purging libxdmcp-dev (1.1.4-r2)
(28/40) Purging libxdmcp (1.1.4-r2)
(29/40) Purging libbsd (0.11.7-r1)
(30/40) Purging libbz2 (1.0.8-r5)
(31/40) Purging libffi (3.4.4-r2)
(32/40) Purging libmd (1.0.4-r2)
(33/40) Purging libpanelw (6.4_p20230429-r0)
(34/40) Purging libxau-dev (1.0.11-r2)
(35/40) Purging libxau (1.0.11-r2)
(36/40) Purging mpdecimal (2.5.1-r2)
(37/40) Purging readline (8.2.1-r1)
(38/40) Purging sqlite-libs (3.41.2-r2)
(39/40) Purging xorgproto (2022.2-r0)
(40/40) Purging xz-libs (5.4.2-r1)
Executing busybox-1.36.0-r8.trigger
OK: 370 MiB in 98 packages
>>> xinput: Updating the community/s390x repository index...
>>> xinput: Signing the index...