>>> quagga: Building main/quagga 1.2.4-r8 (using abuild 3.11.0_rc13-r1) started Sat, 06 May 2023 00:15:45 +0000 >>> quagga: Checking sanity of /home/buildozer/aports/main/quagga/APKBUILD... >>> quagga: Analyzing dependencies... >>> quagga: Installing for build: build-base iproute2 linux-headers readline-dev ncurses-dev c-ares-dev net-snmp-dev gawk texinfo perl (1/34) Installing libbz2 (1.0.8-r5) (2/34) Installing musl-fts (1.2.7-r4) (3/34) Installing xz-libs (5.4.3-r0) (4/34) Installing libelf (0.189-r1) (5/34) Installing libmnl (1.0.5-r1) (6/34) Installing iproute2-minimal (6.3.0-r0) (7/34) Installing libnftnl (1.2.5-r1) (8/34) Installing iptables (1.8.9-r2) (9/34) Installing iproute2-tc (6.3.0-r0) (10/34) Installing iproute2-ss (6.3.0-r0) (11/34) Installing iproute2 (6.3.0-r0) Executing iproute2-6.3.0-r0.post-install (12/34) Installing linux-headers (6.3-r0) (13/34) Installing libhistory (8.2.1-r1) (14/34) Installing libformw (6.4_p20230429-r0) (15/34) Installing libmenuw (6.4_p20230429-r0) (16/34) Installing libpanelw (6.4_p20230429-r0) (17/34) Installing libncurses++ (6.4_p20230429-r0) (18/34) Installing ncurses-dev (6.4_p20230429-r0) (19/34) Installing readline (8.2.1-r1) (20/34) Installing readline-dev (8.2.1-r1) (21/34) Installing c-ares-dev (1.19.0-r3) (22/34) Installing openssl-dev (3.1.0-r4) (23/34) Installing net-snmp-libs (5.9.3-r3) (24/34) Installing net-snmp-agent-libs (5.9.3-r3) (25/34) Installing net-snmp-dev (5.9.3-r3) (26/34) Installing gawk (5.2.1-r2) (27/34) Installing perl (5.36.1-r1) (28/34) Installing texinfo (7.0.3-r1) (29/34) Installing .makedepends-quagga (20230506.001546) (30/34) Installing ifupdown-ng-iproute2 (0.12.1-r2) (31/34) Installing iptables-openrc (1.8.9-r2) (32/34) Installing perl-error (0.17029-r1) (33/34) Installing perl-git (2.40.1-r0) (34/34) Installing git-perl (2.40.1-r0) Executing busybox-1.36.0-r9.trigger OK: 474 MiB in 132 packages >>> quagga: Cleaning up srcdir >>> quagga: Cleaning up pkgdir >>> quagga: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/quagga-1.2.4.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 2857k 100 2857k 0 0 18.2M 0 --:--:-- --:--:-- --:--:-- 18.3M >>> quagga: Fetching https://distfiles.alpinelinux.org/distfiles/v3.18/quagga-1.2.4.tar.gz >>> quagga: Checking sha512sums... quagga-1.2.4.tar.gz: OK 0001-nhrpd-change-ipsec-SA-count-to-32-bit.patch: OK 1001-bgpd-allow-using-ebgp-multihop-for-ibgp-connections.patch: OK dont-hook-core-signals.patch: OK bgpd.initd: OK zebra.initd: OK zebra.confd: OK >>> quagga: Unpacking /var/cache/distfiles/v3.18/quagga-1.2.4.tar.gz... >>> quagga: 0001-nhrpd-change-ipsec-SA-count-to-32-bit.patch patching file nhrpd/nhrpd.h >>> quagga: 1001-bgpd-allow-using-ebgp-multihop-for-ibgp-connections.patch patching file bgpd/bgp_vty.c Hunk #1 succeeded at 277 (offset 1 line). patching file bgpd/bgpd.c Hunk #1 succeeded at 2869 (offset 4 lines). patching file bgpd/bgpd.h Hunk #1 succeeded at 832 (offset 1 line). >>> quagga: dont-hook-core-signals.patch patching file lib/sigevent.c Hunk #1 succeeded at 246 (offset 2 lines). Hunk #2 succeeded at 264 (offset 2 lines). checking build system type... x86_64-alpine-linux-musl checking host system type... x86_64-alpine-linux-musl checking target system type... x86_64-alpine-linux-musl checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for perl... /usr/bin/perl checking for gawk... gawk checking for x86_64-alpine-linux-musl-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for x86_64-alpine-linux-musl-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for gcc option to accept ISO C99... none needed checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/x86_64-alpine-linux-musl/bin/ld checking if the linker (/usr/x86_64-alpine-linux-musl/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking how to convert x86_64-alpine-linux-musl file names to x86_64-alpine-linux-musl format... func_convert_file_noop checking how to convert x86_64-alpine-linux-musl file names to toolchain format... func_convert_file_noop checking for /usr/x86_64-alpine-linux-musl/bin/ld option to reload object files... -r checking for x86_64-alpine-linux-musl-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-alpine-linux-musl-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-alpine-linux-musl-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for x86_64-alpine-linux-musl-strip... no checking for strip... strip checking for x86_64-alpine-linux-musl-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for x86_64-alpine-linux-musl-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/x86_64-alpine-linux-musl/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.lt config.lt: creating libtool checking for sed... /bin/sed checking for pdflatex... /bin/false checking for latexmk... /bin/false configure: WARNING: Will not be able to make PDF versions of TeX documents checking for pandoc... /bin/false configure: WARNING: Will not be able to make PDF versions of MD documents checking which default CFLAGS to set... CFLAGS supplied by user checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for x86_64-alpine-linux-musl-ar... ar checking if make is GNU make... yes checking if zebra should be configurable to send Route Advertisements... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for C/C++ restrict keyword... __restrict checking for working volatile... yes checking for ANSI C header files... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for uid_t in sys/types.h... yes checking for mode_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking stropts.h usability... yes checking stropts.h presence... yes checking for stropts.h... yes checking sys/ksym.h usability... no checking sys/ksym.h presence... no checking for sys/ksym.h... no checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for sys/types.h... (cached) yes checking linux/version.h usability... yes checking linux/version.h presence... yes checking for linux/version.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking asm/types.h usability... yes checking asm/types.h presence... yes checking for asm/types.h... yes checking sys/cdefs.h usability... no checking sys/cdefs.h presence... no checking for sys/cdefs.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking features.h usability... yes checking features.h presence... yes checking for features.h... yes checking for net/if.h... yes checking for net/if_var.h... no checking for sys/un.h... yes checking for netinet/in_systm.h... yes checking for netinet/in_var.h... no checking for net/if_dl.h... no checking for net/netopt.h... no checking for net/route.h... yes checking for inet/nd.h... no checking for arpa/inet.h... yes checking for netinet/ip_icmp.h... yes checking for fcntl.h... yes checking for stddef.h... yes checking for sys/ioctl.h... yes checking for syslog.h... yes checking for wchar.h... yes checking for wctype.h... yes checking for sys/sysctl.h... no checking for sys/sockio.h... no checking for kvm.h... no checking for sys/conf.h... no checking for ucontext.h... yes checking for ucontext_t.uc_mcontext.uc_regs... no checking for ucontext_t.uc_mcontext.regs... no checking for ucontext_t.uc_mcontext.gregs... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for tputs in -ltermcap... no checking for tputs in -ltinfo... no checking for tputs in -lcurses... yes checking for main in -lreadline... yes checking readline/history.h usability... yes checking readline/history.h presence... yes checking for readline/history.h... yes checking for rl_completion_matches in -lreadline... yes checking whether byte ordering is bigendian... no checking for unistd.h... (cached) yes checking for working chown... yes checking for working POSIX fnmatch... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for working memcmp... yes checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for alarm... yes checking for working mktime... yes checking for strftime... yes checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking for strftime... (cached) yes checking for vprintf... yes checking for _doprnt... no checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking for pow in -lm... yes checking for pow... yes checking for dup2... yes checking for ftruncate... yes checking for getcwd... yes checking for gethostbyname... yes checking for getpagesize... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for inet_aton... yes checking for strnlen... yes checking for memchr... yes checking for memmove... yes checking for memset... yes checking for select... yes checking for socket... yes checking for strcasecmp... yes checking for strchr... yes checking for strcspn... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strndup... yes checking for strrchr... yes checking for strspn... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for strlcat... yes checking for strlcpy... yes checking for daemon... yes checking for snprintf... yes checking for vsnprintf... yes checking for if_nametoindex... yes checking for if_indextoname... yes checking for getifaddrs... yes checking for uname... yes checking for fcntl... yes checking for getgrouplist... yes checking asm-generic/unistd.h usability... yes checking asm-generic/unistd.h presence... yes checking for asm-generic/unistd.h... yes checking whether __NR_setns is declared... yes checking for setns... yes checking zebra between kernel interface method... netlink checking net/bpf.h usability... no checking net/bpf.h presence... no checking for net/bpf.h... no checking sys/dlpi.h usability... no checking sys/dlpi.h presence... no checking for sys/dlpi.h... no checking zebra IS-IS I/O method... pfpacket checking for broken CMSG_FIRSTHDR... no checking route read method... netlink checking interface looking up method... netlink checking for struct ip_mreqn.imr_ifindex... yes checking for linux/mroute.h... yes checking for BSD struct ip_mreq hack... no checking for RFC3678 protocol-independed API... yes checking for net/if.h... (cached) yes checking for net/if_media.h... no checking for net/if.h... (cached) yes checking for struct if_data.ifi_link_state... no checking for netinet/tcp.h... yes checking whether TCP_MD5SIG is declared... yes checking ipforward method... (cached) proc checking for getaddrinfo... yes checking whether does this OS have IPv6 stack... Linux IPv6 checking for netinet6/in6.h... no checking for netinet/in6_var.h... no checking for netinet/icmp6.h... yes checking for netinet6/in6_var.h... no checking for netinet6/nd6.h... no checking for inet_ntop in -lc... yes checking for inet_pton in -lc... yes checking for crypt in -lcrypt... yes checking for res_init in -lresolv... yes checking whether system has GNU regex... checking for regexec in -lc... yes checking for CARES... yes checking for x86_64-alpine-linux-musl-net-snmp-config... no checking for net-snmp-config... /usr/bin/net-snmp-config checking whether we can link to Net-SNMP... yes checking for struct sockaddr... yes checking for struct sockaddr_in... yes checking for struct sockaddr_in6... yes checking for struct sockaddr_un... yes checking for struct sockaddr_dl... no checking for socklen_t... yes checking for struct vifctl... no checking for struct mfcctl... no checking for struct sioc_sg_req... no checking for vifi_t... no checking for struct sioc_vif_req... no checking for struct igmpmsg... no checking for struct ifaliasreq... no checking for struct if6_aliasreq... no checking for struct in6_aliasreq... no checking for struct nd_opt_adv_interval... yes checking for struct rt_addrinfo... no checking for struct nd_opt_homeagent_info... no checking for struct nd_opt_adv_interval... (cached) yes checking for struct sockaddr.sa_len... no checking for struct sockaddr_in.sin_len... no checking for struct sockaddr_un.sun_len... no checking for struct sockaddr_in6.sin6_scope_id... yes checking for struct sockaddr_dl.sdl_len... no checking for struct if6_aliasreq.ifra_lifetime... no checking for struct nd_opt_adv_interval.nd_opt_ai_type... no checking for struct in_pktinfo... yes checking for struct icmphdr... yes checking for IP_PKTINFO... yes checking for IP_RECVDSTADDR... no checking for IP_RECVIF... no checking whether getrusage is available... yes checking whether CLOCK_MONOTONIC is declared... yes checking for clock_gettime in -lrt... yes checking whether prctl PR_SET_KEEPCAPS is available... yes checking sys/capability.h usability... no checking sys/capability.h presence... no checking for sys/capability.h... no checking priv.h usability... no checking priv.h presence... no checking for priv.h... no checking whether gcc accepts function __attribute__((weak,alias()))... no checking whether gcc supports #pragma weak... yes checking whether gcc supports #pragma _HP_SECONDARY_DEF... no checking whether gcc supports #pragma _CRI duplicate... no checking how to create weak aliases with gcc... pragma checking whether gcc supports weak aliases across object file boundaries... yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking for malloc.h... yes checking whether mallinfo is available... no checking directory to use for state file... /var/run/quagga checking for working htonl... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating lib/Makefile config.status: creating qpb/Makefile config.status: creating zebra/Makefile config.status: creating ripd/Makefile config.status: creating ripngd/Makefile config.status: creating bgpd/Makefile config.status: creating ospfd/Makefile config.status: creating watchquagga/Makefile config.status: creating ospf6d/Makefile config.status: creating isisd/Makefile config.status: creating vtysh/Makefile config.status: creating doc/Makefile config.status: creating ospfclient/Makefile config.status: creating tests/Makefile config.status: creating m4/Makefile config.status: creating pimd/Makefile config.status: creating nhrpd/Makefile config.status: creating redhat/Makefile config.status: creating pkgsrc/Makefile config.status: creating fpm/Makefile config.status: creating redhat/quagga.spec config.status: creating redhat/quagga.sysconfig config.status: creating lib/version.h config.status: creating isisd/topology/Makefile config.status: creating pkgsrc/bgpd.sh config.status: creating pkgsrc/ospf6d.sh config.status: creating pkgsrc/ospfd.sh config.status: creating pkgsrc/ripd.sh config.status: creating pkgsrc/ripngd.sh config.status: creating pkgsrc/zebra.sh config.status: creating solaris/Makefile config.status: creating vtysh/extract.pl config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands Quagga configuration -------------------- quagga version : 1.2.4 host operating system : linux-musl source code location : . compiler : gcc compiler flags : -Os -Wformat -Werror=format-security -Werror=int-conversion -g -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -DNETSNMP_REMOVE_U64 -Os -Wformat -g -Ulinux -Dlinux=linux -Os -Wformat -Werror=format-security -I/usr/include -Os -Wformat -Werror=format-security -g make : make linker flags : -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -lresolv -lcrypt -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -L/usr/lib -lnetsnmpmibs -lnetsnmpagent -lnetsnmp -lssl -lssl -lcrypto -lrt -lreadline -lcurses -lm state file directory : /var/run/quagga config file directory : /etc/quagga example directory : /usr/share/doc/quagga/ user to run as : quagga group to run as : quagga group for vty sockets : quagga config file mask : 0600 log file mask : 0600 zebra protobuf enabled : no The above user and group must have read/write access to the state file directory and to the config files in the config file directory. make all-recursive make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' Making all in lib make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' true make all-am make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' CC network.lo CC pid_output.lo CC getopt.lo CC getopt1.lo CC daemon.lo CC checksum.lo CC vector.lo CC linklist.lo CC vty.lo CC command.lo CC sockunion.lo CC prefix.lo CC thread.lo CC if.lo CC memory.lo CC buffer.lo CC table.lo CC hash.lo CC filter.lo CC routemap.lo CC distribute.lo CC stream.lo CC str.lo CC log.lo CC plist.lo CC zclient.lo CC sockopt.lo CC agentx.lo CC smux.lo CC snmp.lo CC md5.lo CC if_rmap.lo CC keychain.lo CC privs.lo CC sigevent.lo command.c: In function 'cmd_complete_command_real': command.c:2439:38: warning: comparison between pointer and zero character constant [-Wpointer-compare] 2439 | if (vector_slot (vline, index) == '\0') | ^~ In file included from command.c:31: vector.h:40:27: note: did you mean to dereference the pointer? 40 | #define vector_slot(V,I) ((V)->index[(I)]) | ^ command.c:2439:11: note: in expansion of macro 'vector_slot' 2439 | if (vector_slot (vline, index) == '\0') | ^~~~~~~~~~~ CC pqueue.lo CC jhash.lo CC memtypes.lo CC workqueue.lo CC vrf.lo CC event_counter.lo CC nexthop.lo CCLD libzebra.la make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' Making all in qpb make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make all-am make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' CC qpb.lo CCLD libquagga_pb.la make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' Making all in fpm make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make all-am make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' CC fpm_pb.lo CCLD libfpm_pb.la make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' Making all in zebra make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' CC test_main.o CC zebra_rib.o CC interface.o CC connected.o CC debug.o CC zebra_vty.o CC kernel_null.o CC redistribute_null.o CC ioctl_null.o CC misc_null.o CC zebra_rnh_null.o CC zserv.o CC main.o CC zebra_routemap.o CC redistribute.o CC rtadv.o CC zebra_snmp.o CC irdp_main.o CC irdp_interface.o CC irdp_packet.o CC router-id.o CC zebra_fpm.o CC zebra_rnh.o CC zebra_fpm_netlink.o CC ioctl.o CC ipforward_proc.o CC if_netlink.o CC rt_netlink.o CC rtread_netlink.o In file included from redistribute_null.c:26: ../zebra/redistribute.h:38:13: warning: 'redistribute_delete' alias between functions of incompatible types 'void(struct prefix *, struct rib *)' and 'void(struct prefix *, struct rib *, struct rib *)' [-Wattribute-alias=] 38 | extern void redistribute_delete (struct prefix *, struct rib *); | ^~~~~~~~~~~~~~~~~~~ redistribute_null.c:47:6: note: aliased declaration here 47 | void redistribute_add (struct prefix *a, struct rib *b, struct rib *c) | ^~~~~~~~~~~~~~~~ In file included from misc_null.c:25: ../zebra/rtadv.h:61:13: warning: 'rtadv_config_write' alias between functions of incompatible types 'void(struct vty *, struct interface *)' and 'void(void)' [-Wattribute-alias=] 61 | extern void rtadv_config_write (struct vty *, struct interface *); | ^~~~~~~~~~~~~~~~~~ misc_null.c:32:6: note: aliased declaration here 32 | void _quagga_noop (void) { return; } | ^~~~~~~~~~~~ In file included from ../zebra/interface.h:29, from ../zebra/rtadv.h:27: ../zebra/irdp.h:148:13: warning: 'irdp_config_write' alias between functions of incompatible types 'void(struct vty *, struct interface *)' and 'void(void)' [-Wattribute-alias=] 148 | extern void irdp_config_write (struct vty *, struct interface *); | ^~~~~~~~~~~~~~~~~ misc_null.c:32:6: note: aliased declaration here 32 | void _quagga_noop (void) { return; } | ^~~~~~~~~~~~ CCLD testzebra CCLD zebra make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' Making all in bgpd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' CC bgpd.o CC bgp_fsm.o CC bgp_aspath.o CC bgp_community.o CC bgp_attr.o CC bgp_debug.o CC bgp_route.o CC bgp_zebra.o CC bgp_open.o CC bgp_routemap.o CC bgp_packet.o CC bgp_network.o CC bgp_filter.o CC bgp_regex.o CC bgp_clist.o CC bgp_dump.o CC bgp_snmp.o CC bgp_ecommunity.o CC bgp_lcommunity.o CC bgp_mplsvpn.o CC bgp_nexthop.o CC bgp_damp.o CC bgp_table.o CC bgp_advertise.o CC bgp_vty.o CC bgp_mpath.o CC bgp_encap.o CC bgp_encap_tlv.o CC bgp_nht.o CC bgp_btoa.o CC bgp_main.o bgp_open.c: In function 'bgp_capability_orf_entry': bgp_open.c:222:30: warning: taking address of packed member of 'struct capability_orf_entry' may result in an unaligned pointer value [-Waddress-of-packed-member] 222 | bgp_capability_mp_data (s, &entry.mpc); | ^~~~~~~~~~ AR libbgp.a ar: `u' modifier ignored since `D' is the default (see `U') CCLD bgp_btoa CCLD bgpd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' Making all in ripd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' CC ripd.o CC rip_zebra.o CC rip_interface.o CC rip_debug.o CC rip_snmp.o CC rip_routemap.o CC rip_peer.o CC rip_offset.o CC rip_main.o AR librip.a CCLD ripd ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' Making all in ripngd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' CC ripng_interface.o CC ripngd.o CC ripng_zebra.o CC ripng_route.o CC ripng_debug.o CC ripng_routemap.o CC ripng_offset.o CC ripng_peer.o CC ripng_nexthop.o CC ripng_main.o AR libripng.a CCLD ripngd ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' Making all in ospfd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' CC ospfd.lo CC ospf_zebra.lo CC ospf_interface.lo CC ospf_ism.lo CC ospf_neighbor.lo CC ospf_nsm.lo CC ospf_dump.lo CC ospf_network.lo CC ospf_packet.lo CC ospf_lsa.lo CC ospf_spf.lo CC ospf_route.lo CC ospf_ase.lo CC ospf_abr.lo CC ospf_ia.lo CC ospf_flood.lo CC ospf_lsdb.lo CC ospf_asbr.lo CC ospf_routemap.lo CC ospf_snmp.lo CC ospf_opaque.lo CC ospf_te.lo CC ospf_ri.lo CC ospf_vty.lo CC ospf_api.lo CC ospf_apiserver.lo CC ospf_main.o CCLD libospf.la CCLD ospfd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' Making all in ospf6d make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' CC ospf6_network.o CC ospf6_message.o CC ospf6_lsa.o CC ospf6_lsdb.o CC ospf6_top.o CC ospf6_area.o CC ospf6_interface.o CC ospf6_neighbor.o CC ospf6_flood.o CC ospf6_route.o CC ospf6_intra.o CC ospf6_zebra.o CC ospf6_spf.o CC ospf6_proto.o CC ospf6_asbr.o CC ospf6_abr.o CC ospf6_snmp.o CC ospf6d.o CC ospf6_main.o AR libospf6.a CCLD ospf6d ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' Making all in nhrpd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' CC zbuf.o CC znl.o CC resolver.o CC linux.o CC netlink_arp.o CC netlink_gre.o CC vici.o CC reqid.o CC nhrp_event.o CC nhrp_packet.o CC nhrp_interface.o CC nhrp_vc.o CC nhrp_peer.o CC nhrp_cache.o CC nhrp_nhs.o CC nhrp_route.o CC nhrp_shortcut.o CC nhrp_vty.o CC nhrp_main.o CCLD nhrpd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' Making all in isisd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' Making all in topology make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' CC spgrid.o CC random.o AR libtopology.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' CC isis_adjacency.o CC isis_lsp.o CC dict.o CC isis_circuit.o CC isis_pdu.o CC isis_tlv.o CC isisd.o CC isis_misc.o CC isis_zebra.o CC isis_dr.o CC isis_flags.o CC isis_dynhn.o CC iso_checksum.o CC isis_csm.o CC isis_events.o CC isis_spf.o CC isis_redist.o CC isis_route.o CC isis_routemap.o CC isis_te.o CC isis_vty.o CC isis_main.o CC isis_bpf.o CC isis_dlpi.o CC isis_pfpacket.o isis_pdu.c: In function 'process_lsp': isis_pdu.c:1392:38: warning: taking address of packed member of 'struct isis_link_state_hdr' may result in an unaligned pointer value [-Waddress-of-packed-member] 1392 | pdu_len - 12, &hdr->checksum)) | ^~~~~~~~~~~~~~ AR libisis.a CCLD isisd ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' Making all in pimd make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' CC pimd.o CC pim_version.o CC pim_cmd.o CC pim_signals.o CC pim_iface.o CC pim_vty.o CC pim_igmp.o CC pim_sock.o CC pim_zebra.o CC pim_igmpv3.o CC pim_str.o CC pim_mroute.o CC pim_util.o CC pim_time.o CC pim_oil.o CC pim_zlookup.o CC pim_pim.o CC pim_tlv.o CC pim_neighbor.o CC pim_hello.o CC pim_ifchannel.o CC pim_join.o CC pim_assert.o CC pim_msg.o CC pim_upstream.o CC pim_rpf.o CC pim_macro.o CC pim_igmp_join.o CC pim_ssmpingd.o CC pim_int.o CC pim_static.o CC pim_routemap.o CC test_igmpv3_join.o CC pim_main.o CCLD test_igmpv3_join AR libpim.a CCLD pimd ar: `u' modifier ignored since `D' is the default (see `U') make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' Making all in watchquagga make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' CC watchquagga.o CCLD watchquagga make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' Making all in vtysh make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' CC vtysh_main.o CC vtysh.o CC vtysh_user.o CC vtysh_config.o ./extract.pl ../bgpd/*.c ../isisd/*.c ../ospfd/*.c ../ospf6d/*.c ../ripd/*.c ../ripngd/*.c ../pimd/pim_cmd.c ../nhrpd/nhrp_vty.c ../lib/keychain.c ../lib/routemap.c ../lib/filter.c ../lib/plist.c ../lib/distribute.c ../lib/if_rmap.c ../lib/vrf.c ../lib/vty.c ../zebra/debug.c ../zebra/interface.c ../zebra/irdp_interface.c ../zebra/rtadv.c ../zebra/zebra_vty.c ../zebra/zserv.c ../zebra/router-id.c ../zebra/zebra_routemap.c ../zebra/zebra_fpm.c > vtysh_cmd.c Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ipv6_address_cmd From cli: "match ipv6 address WORD" to New cli: "match ipv6 address WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ipv6_address_cmd From cli: "no match ipv6 address WORD" to New cli: "no match ipv6 address" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ipv6_address_prefix_list_cmd From cli: "match ipv6 address prefix-list WORD" to New cli: "match ipv6 address prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_match_ipv6_address_prefix_list_cmd From cli: "no match ipv6 address prefix-list WORD" to New cli: "no match ipv6 address prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D Duplicate CLI Function: match_metric_cmd From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_metric_cmd From cli: "no match metric" to New cli: "no match metric" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_metric_val_cmd From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_next_hop_cmd From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_cmd From cli: "no match ip next-hop" to New cli: "no match ip next-hop" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_val_cmd From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_metric_addsub_cmd From cli: "set metric <+/-metric>" to New cli: "set metric <+/-metric>" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_ip_nexthop_cmd From cli: "set ip next-hop A.B.C.D" to New cli: "set ip next-hop A.B.C.D" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_ip_nexthop_cmd From cli: "no set ip next-hop" to New cli: "no set ip next-hop" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_ip_nexthop_val_cmd From cli: "no set ip next-hop A.B.C.D" to New cli: "no set ip next-hop A.B.C.D" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD Duplicate CLI Function: router_zebra_cmd From cli: "router zebra" to New cli: "router zebra" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: no_router_zebra_cmd From cli: "no router zebra" to New cli: "no router zebra" Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD Duplicate CLI Function: match_metric_cmd From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_metric_cmd From cli: "no match metric" to New cli: "no match metric" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_metric_val_cmd From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_tag_cmd From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_tag_cmd From cli: "no match tag" to New cli: "no match tag" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_match_tag_val_cmd From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_metric_cmd From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_metric_cmd From cli: "no set metric" to New cli: "no set metric" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_metric_val_cmd From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_ipv6_nexthop_local_cmd From cli: "set ipv6 next-hop local X:X::X:X" to New cli: "set ipv6 next-hop local X:X::X:X" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_ipv6_nexthop_local_cmd From cli: "no set ipv6 next-hop local" to New cli: "no set ipv6 next-hop local" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_ipv6_nexthop_local_val_cmd From cli: "no set ipv6 next-hop local X:X::X:X" to New cli: "no set ipv6 next-hop local X:X::X:X" Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: set_tag_cmd From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_tag_cmd From cli: "no set tag" to New cli: "no set tag" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_set_tag_val_cmd From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: router_zebra_cmd From cli: "router zebra" to New cli: "router zebra" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: no_router_zebra_cmd From cli: "no router zebra" to New cli: "no router zebra" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD Duplicate CLI Function: match_interface_cmd From cli: "match interface WORD" to New cli: "match interface WORD" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_interface_cmd From cli: "no match interface" to New cli: "no match interface" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_interface_val_cmd From cli: "no match interface WORD" to New cli: "no match interface WORD" Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_next_hop_cmd From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_cmd From cli: "no match ip next-hop" to New cli: "no match ip next-hop" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_val_cmd From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_address_cmd From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_cmd From cli: "no match ip address" to New cli: "no match ip address" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_val_cmd From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: match_ip_address_prefix_list_cmd From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_prefix_list_cmd From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD" Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA CC vtysh_cmd.o CCLD vtysh make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' Making all in ospfclient make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' CC ospf_apiclient.lo CC ospfclient-ospfclient.o CCLD libospfapiclient.la CCLD ospfclient make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' Making all in doc make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' Making all in m4 make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' Making all in redhat make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' Making all in tests make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' sed \ -e 's/"vtysh\.h"/"tests.h"/' \ -e 's/vtysh_init_cmd/test_init_cmd/' \ -e 's/VTYSH_[A-Z][A-Z_0-9]*/0/g' \ < ../vtysh/vtysh_cmd.c \ > test-commands-defun.c make all-am make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' >>> quagga: Entering fakeroot... Making install in lib make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' true make install-am make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga' /bin/sh ../libtool --mode=install /usr/bin/install -c libzebra.la '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' /usr/bin/install -c -m 644 buffer.h checksum.h command.h filter.h getopt.h hash.h if.h linklist.h log.h memory.h network.h prefix.h routemap.h distribute.h sockunion.h str.h stream.h table.h thread.h vector.h version.h vty.h zebra.h plist.h zclient.h sockopt.h smux.h md5.h if_rmap.h keychain.h privs.h sigevent.h pqueue.h jhash.h zassert.h memtypes.h workqueue.h route_types.h libospf.h vrf.h '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga' /usr/bin/install -c -m 644 fifo.h event_counter.h nexthop.h '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga' libtool: install: /usr/bin/install -c .libs/libzebra.so.1.0.0 /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libzebra.so.1.0.0 libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so.1 || { rm -f libzebra.so.1 && ln -s libzebra.so.1.0.0 libzebra.so.1; }; }) libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so || { rm -f libzebra.so && ln -s libzebra.so.1.0.0 libzebra.so; }; }) libtool: install: /usr/bin/install -c .libs/libzebra.lai /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libzebra.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib' Making install in qpb make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make install-am make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make[3]: Nothing to be done for 'install-data-am'. .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libquagga_pb.la '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' libtool: install: /usr/bin/install -c .libs/libquagga_pb.so.0.0.0 /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libquagga_pb.so.0.0.0 libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so.0 || { rm -f libquagga_pb.so.0 && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so.0; }; }) libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so || { rm -f libquagga_pb.so && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so; }; }) libtool: install: /usr/bin/install -c .libs/libquagga_pb.lai /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libquagga_pb.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/qpb' Making install in fpm make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make install-am make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make[3]: Nothing to be done for 'install-data-am'. .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libfpm_pb.la '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' libtool: install: /usr/bin/install -c .libs/libfpm_pb.so.0.0.0 /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libfpm_pb.so.0.0.0 libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so.0 || { rm -f libfpm_pb.so.0 && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so.0; }; }) libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so || { rm -f libfpm_pb.so && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so; }; }) libtool: install: /usr/bin/install -c .libs/libfpm_pb.lai /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libfpm_pb.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/fpm' Making install in zebra make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 zebra.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c zebra '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/zebra /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/zebra make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/zebra' Making install in bgpd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 bgpd.conf.sample bgpd.conf.sample2 '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c bgpd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c bgp_btoa '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/bgpd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/bgpd libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/bgp_btoa /home/buildozer/aports/main/quagga/pkg/quagga/usr/bin/bgp_btoa make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/bgpd' Making install in ripd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 ripd.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c ripd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/ripd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/ripd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripd' Making install in ripngd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 ripngd.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c ripngd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/ripngd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/ripngd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ripngd' Making install in ospfd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c libospf.la '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga/ospfd' /usr/bin/install -c -m 644 ospfd.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c ospfd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' /usr/bin/install -c -m 644 ospf_api.h ospf_asbr.h ospf_dump.h ospf_lsa.h ospf_lsdb.h ospf_nsm.h ospf_ism.h ospf_opaque.h ospfd.h '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga/ospfd' libtool: warning: relinking 'libospf.la' libtool: install: (cd /home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd; /bin/sh "/home/buildozer/aports/main/quagga/src/quagga-1.2.4/libtool" --silent --tag CC --mode=relink gcc -Os -Wformat -Werror=format-security -g -fcommon -fPIC -version-info 0:0:0 -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -o libospf.la -rpath /usr/lib ospfd.lo ospf_zebra.lo ospf_interface.lo ospf_ism.lo ospf_neighbor.lo ospf_nsm.lo ospf_dump.lo ospf_network.lo ospf_packet.lo ospf_lsa.lo ospf_spf.lo ospf_route.lo ospf_ase.lo ospf_abr.lo ospf_ia.lo ospf_flood.lo ospf_lsdb.lo ospf_asbr.lo ospf_routemap.lo ospf_snmp.lo ospf_opaque.lo ospf_te.lo ospf_ri.lo ospf_vty.lo ospf_api.lo ospf_apiserver.lo ../lib/libzebra.la -lresolv -lcrypt -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -L/usr/lib -lnetsnmpmibs -lnetsnmpagent -lnetsnmp -lssl -lssl -lcrypto -lrt -inst-prefix-dir /home/buildozer/aports/main/quagga/pkg/quagga) libtool: warning: 'libospf.la' has not been installed in '/usr/lib' libtool: warning: '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib/libzebra.la' has not been installed in '/usr/lib' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/ospfd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/ospfd libtool: install: /usr/bin/install -c .libs/libospf.so.0.0.0T /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libospf.so.0.0.0 libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libospf.so.0.0.0 libospf.so.0 || { rm -f libospf.so.0 && ln -s libospf.so.0.0.0 libospf.so.0; }; }) libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libospf.so.0.0.0 libospf.so || { rm -f libospf.so && ln -s libospf.so.0.0.0 libospf.so; }; }) libtool: install: /usr/bin/install -c .libs/libospf.lai /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libospf.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd' Making install in ospf6d make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 ospf6d.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c ospf6d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/ospf6d /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/ospf6d make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospf6d' Making install in nhrpd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' make[2]: Nothing to be done for 'install-data-am'. .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c nhrpd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/nhrpd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/nhrpd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/nhrpd' Making install in isisd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' Making install in topology make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd/topology' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 isisd.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c isisd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/isisd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/isisd make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/isisd' Making install in pimd make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c test_igmpv3_join '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 pimd.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c pimd '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: install: /usr/bin/install -c test_igmpv3_join /home/buildozer/aports/main/quagga/pkg/quagga/usr/bin/test_igmpv3_join libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/pimd /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/pimd make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/pimd' Making install in watchquagga make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' make[2]: Nothing to be done for 'install-data-am'. .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c watchquagga '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/watchquagga /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/watchquagga make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/watchquagga' Making install in vtysh make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /usr/bin/install -c -m 644 vtysh.conf.sample '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/doc/quagga/' /bin/sh ../libtool --mode=install /usr/bin/install -c vtysh '/home/buildozer/aports/main/quagga/pkg/quagga/usr/bin' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/vtysh /home/buildozer/aports/main/quagga/pkg/quagga/usr/bin/vtysh make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/vtysh' Making install in ospfclient make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga/ospfapi' /bin/sh ../libtool --mode=install /usr/bin/install -c libospfapiclient.la '/home/buildozer/aports/main/quagga/pkg/quagga/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c ospfclient '/home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin' /usr/bin/install -c -m 644 ospf_apiclient.h '/home/buildozer/aports/main/quagga/pkg/quagga/usr/include/quagga/ospfapi' libtool: warning: relinking 'libospfapiclient.la' libtool: install: (cd /home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient; /bin/sh "/home/buildozer/aports/main/quagga/src/quagga-1.2.4/libtool" --silent --tag CC --mode=relink gcc -Os -Wformat -Werror=format-security -g -fcommon -fPIC -version-info 0:0:0 -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -o libospfapiclient.la -rpath /usr/lib ospf_apiclient.lo ../ospfd/libospf.la ../lib/libzebra.la -lresolv -lcrypt -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -L/usr/lib -lnetsnmpmibs -lnetsnmpagent -lnetsnmp -lssl -lssl -lcrypto -lrt -inst-prefix-dir /home/buildozer/aports/main/quagga/pkg/quagga) libtool: warning: 'libospfapiclient.la' has not been installed in '/usr/lib' libtool: warning: '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfd/libospf.la' has not been installed in '/usr/lib' libtool: warning: '../ospfd/libospf.la' has not been installed in '/usr/lib' libtool: warning: '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/lib/libzebra.la' has not been installed in '/usr/lib' libtool: warning: '../lib/libzebra.la' has not been installed in '/usr/lib' libtool: install: /usr/bin/install -c .libs/ospfclient /home/buildozer/aports/main/quagga/pkg/quagga/usr/sbin/ospfclient libtool: install: /usr/bin/install -c .libs/libospfapiclient.so.0.0.0T /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libospfapiclient.so.0.0.0 libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libospfapiclient.so.0.0.0 libospfapiclient.so.0 || { rm -f libospfapiclient.so.0 && ln -s libospfapiclient.so.0.0.0 libospfapiclient.so.0; }; }) libtool: install: (cd /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib && { ln -s -f libospfapiclient.so.0.0.0 libospfapiclient.so || { rm -f libospfapiclient.so && ln -s libospfapiclient.so.0.0.0 libospfapiclient.so; }; }) libtool: install: /usr/bin/install -c .libs/libospfapiclient.lai /home/buildozer/aports/main/quagga/pkg/quagga/usr/lib/libospfapiclient.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/ospfclient' Making install in doc make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' make[2]: Nothing to be done for 'install-exec-am'. .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/info' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/man/man1' .././install-sh -c -d '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/man/man8' /usr/bin/install -c -m 644 ./quagga.info ./quagga.info-1 ./quagga.info-2 '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/info' /usr/bin/install -c -m 644 vtysh.1 '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/man/man1' /usr/bin/install -c -m 644 pimd.8 bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 ripngd.8 nhrpd.8 watchquagga.8 zebra.8 '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/man/man8' install-info --info-dir='/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/info' '/home/buildozer/aports/main/quagga/pkg/quagga/usr/share/info/quagga.info' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/doc' Making install in m4 make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/m4' Making install in redhat make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/redhat' Making install in tests make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make install-am make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[3]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4/tests' make[1]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' make[2]: Entering directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' make[1]: Leaving directory '/home/buildozer/aports/main/quagga/src/quagga-1.2.4' >>> quagga-dev*: Running split function dev... >>> quagga-dev*: Preparing subpackage quagga-dev... >>> quagga-dev*: Running postcheck for quagga-dev >>> quagga-doc*: Running split function doc... >>> quagga-doc*: Preparing subpackage quagga-doc... >>> quagga-doc*: Running postcheck for quagga-doc >>> quagga-dbg*: Running split function dbg... >>> quagga-dbg*: Preparing subpackage quagga-dbg... >>> quagga-dbg*: Running postcheck for quagga-dbg >>> quagga-openrc*: Running split function openrc... >>> quagga-openrc*: Preparing subpackage quagga-openrc... >>> quagga-openrc*: Running postcheck for quagga-openrc >>> quagga*: Running postcheck for quagga >>> quagga*: Preparing package quagga... >>> quagga*: Script found. /bin/sh added as a dependency for quagga-1.2.4-r8.apk >>> quagga*: Adding .pre-install >>> quagga*: Adding .post-install >>> quagga*: Adding .post-upgrade >>> quagga-dbg*: Scanning shared objects >>> quagga-dev*: Scanning shared objects >>> quagga-doc*: Scanning shared objects >>> quagga-openrc*: Scanning shared objects >>> quagga*: Scanning shared objects >>> quagga-dbg*: Tracing dependencies... >>> quagga-dbg*: Package size: 9.9 MB >>> quagga-dbg*: Compressing data... >>> quagga-dbg*: Create checksum... >>> quagga-dbg*: Create quagga-dbg-1.2.4-r8.apk >>> quagga-dev*: Tracing dependencies... quagga=1.2.4-r8 >>> quagga-dev*: Package size: 420.0 KB >>> quagga-dev*: Compressing data... >>> quagga-dev*: Create checksum... >>> quagga-dev*: Create quagga-dev-1.2.4-r8.apk >>> quagga-doc*: Tracing dependencies... >>> quagga-doc*: Package size: 548.0 KB >>> quagga-doc*: Compressing data... >>> quagga-doc*: Create checksum... >>> quagga-doc*: Create quagga-doc-1.2.4-r8.apk >>> quagga-openrc*: Tracing dependencies... >>> quagga-openrc*: Package size: 28.0 KB >>> quagga-openrc*: Compressing data... >>> quagga-openrc*: Create checksum... >>> quagga-openrc*: Create quagga-openrc-1.2.4-r8.apk >>> quagga*: Tracing dependencies... iproute2 /bin/sh so:libc.musl-x86_64.so.1 so:libcares.so.2 so:libnetsnmp.so.40 so:libnetsnmpagent.so.40 so:libreadline.so.8 >>> quagga*: Package size: 5.1 MB >>> quagga*: Compressing data... >>> quagga*: Create checksum... >>> quagga*: Create quagga-1.2.4-r8.apk >>> quagga: Build complete at Sat, 06 May 2023 00:16:57 +0000 elapsed time 0h 1m 12s >>> quagga: Cleaning up srcdir >>> quagga: Cleaning up pkgdir >>> quagga: Uninstalling dependencies... (1/34) Purging .makedepends-quagga (20230506.001546) (2/34) Purging iproute2 (6.3.0-r0) (3/34) Purging iproute2-tc (6.3.0-r0) (4/34) Purging iproute2-ss (6.3.0-r0) (5/34) Purging linux-headers (6.3-r0) (6/34) Purging readline-dev (8.2.1-r1) (7/34) Purging libhistory (8.2.1-r1) (8/34) Purging readline (8.2.1-r1) (9/34) Purging ncurses-dev (6.4_p20230429-r0) (10/34) Purging libncurses++ (6.4_p20230429-r0) (11/34) Purging libpanelw (6.4_p20230429-r0) (12/34) Purging c-ares-dev (1.19.0-r3) (13/34) Purging net-snmp-dev (5.9.3-r3) (14/34) Purging openssl-dev (3.1.0-r4) (15/34) Purging net-snmp-agent-libs (5.9.3-r3) (16/34) Purging net-snmp-libs (5.9.3-r3) (17/34) Purging gawk (5.2.1-r2) (18/34) Purging texinfo (7.0.3-r1) (19/34) Purging git-perl (2.40.1-r0) (20/34) Purging perl-git (2.40.1-r0) (21/34) Purging perl-error (0.17029-r1) (22/34) Purging perl (5.36.1-r1) (23/34) Purging ifupdown-ng-iproute2 (0.12.1-r2) (24/34) Purging iproute2-minimal (6.3.0-r0) (25/34) Purging iptables-openrc (1.8.9-r2) (26/34) Purging iptables (1.8.9-r2) (27/34) Purging libelf (0.189-r1) (28/34) Purging libformw (6.4_p20230429-r0) (29/34) Purging libmenuw (6.4_p20230429-r0) (30/34) Purging libnftnl (1.2.5-r1) (31/34) Purging musl-fts (1.2.7-r4) (32/34) Purging xz-libs (5.4.3-r0) (33/34) Purging libbz2 (1.0.8-r5) (34/34) Purging libmnl (1.0.5-r1) Executing busybox-1.36.0-r9.trigger OK: 392 MiB in 98 packages >>> quagga: Updating the main/x86_64 repository index... >>> quagga: Signing the index...