>>> libaacs: Building community/libaacs 0.11.1-r1 (using abuild 3.12.0-r0) started Wed, 01 Nov 2023 02:06:48 +0000
>>> libaacs: Checking sanity of /home/buildozer/aports/community/libaacs/APKBUILD...
>>> libaacs: Analyzing dependencies...
>>> libaacs: Installing for build: build-base bison flex libgcrypt-dev
(1/8) Installing m4 (1.4.19-r3)
(2/8) Installing bison (3.8.2-r1)
(3/8) Installing flex (2.6.4-r6)
(4/8) Installing libgpg-error (1.47-r2)
(5/8) Installing libgcrypt (1.10.2-r2)
(6/8) Installing libgpg-error-dev (1.47-r2)
(7/8) Installing libgcrypt-dev (1.10.2-r2)
(8/8) Installing .makedepends-libaacs (20231101.020654)
Executing busybox-1.36.1-r13.trigger
OK: 439 MiB in 114 packages
>>> libaacs: Cleaning up srcdir
>>> libaacs: Cleaning up pkgdir
>>> libaacs: Cleaning up tmpdir
>>> libaacs: Fetching https://distfiles.alpinelinux.org/distfiles/v3.19/libaacs-0.11.1.tar.bz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0   146    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
curl: (22) The requested URL returned error: 404
>>> libaacs: Fetching https://download.videolan.org/pub/videolan/libaacs/0.11.1/libaacs-0.11.1.tar.bz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  318k  100  318k    0     0   424k      0 --:--:-- --:--:-- --:--:--  424k
>>> libaacs: Fetching https://distfiles.alpinelinux.org/distfiles/v3.19/libaacs-0.11.1.tar.bz2
>>> libaacs: Checking sha512sums...
libaacs-0.11.1.tar.bz2: OK
>>> libaacs: Unpacking /var/cache/distfiles/v3.19/libaacs-0.11.1.tar.bz2...
checking build system type... s390x-ibm-linux-musl
checking host system type... s390x-ibm-linux-musl
checking target system type... s390x-ibm-linux-musl
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... build-aux/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '1000' is supported by ustar format... yes
checking whether GID '1000' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... (cached) yes
checking for s390x-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/s390x-alpine-linux-musl/bin/ld
checking if the linker (/usr/s390x-alpine-linux-musl/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking how to convert s390x-ibm-linux-musl file names to s390x-ibm-linux-musl format... func_convert_file_noop
checking how to convert s390x-ibm-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/s390x-alpine-linux-musl/bin/ld option to reload object files... -r
checking for s390x-alpine-linux-musl-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... (cached) pass_all
checking for s390x-alpine-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for s390x-alpine-linux-musl-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for s390x-alpine-linux-musl-strip... no
checking for strip... strip
checking for s390x-alpine-linux-musl-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for s390x-alpine-linux-musl-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/s390x-alpine-linux-musl/bin/ld -m elf64_s390) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking for bison... bison -y
checking return type of signal handlers... void
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for sys/types.h... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking linux/cdrom.h usability... no
checking linux/cdrom.h presence... no
checking for linux/cdrom.h... no
checking for inttypes.h... (cached) yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/mount.h usability... yes
checking sys/mount.h presence... yes
checking for sys/mount.h... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for s390x-alpine-linux-musl-libgcrypt-config... no
checking for libgcrypt-config... /usr/bin/libgcrypt-config
checking for LIBGCRYPT - version >= 1.6.0... yes (1.10.2)
checking whether strerror_r is declared... yes
checking for strerror_r... yes
checking whether strerror_r returns char *... no
checking for s390x-alpine-linux-musl-gpg-error-config... no
checking for gpg-error-config... /usr/bin/gpg-error-config
checking for GPG Error - version >= 0.5... yes (1.47)
configure: WARNING:
***
*** The config script /usr/bin/gpg-error-config was
*** built for s390x-alpine-linux-musl and thus may not match the
*** used host s390x-ibm-linux-musl.
*** You may want to use the configure option --with-gpg-error-prefix
*** to specify a matching config script.
***
checking if gcc supports -Wall flag... yes
checking if gcc supports -Wdisabled-optimization flag... yes
checking if gcc supports -Wpointer-arith flag... yes
checking if gcc supports -Wredundant-decls flag... yes
checking if gcc supports -Wcast-qual flag... yes
checking if gcc supports -Wwrite-strings flag... yes
checking if gcc supports -Wtype-limits flag... yes
checking if gcc supports -Wundef flag... yes
checking if gcc supports -Wmissing-prototypes flag... yes
checking if gcc supports -Wshadow flag... yes
checking if gcc supports -Werror=implicit-function-declaration flag... yes
checking for gcc way to treat warnings as errors... -Werror
checking if gcc supports -Wextra flag... yes
checking if gcc supports -Winline flag... yes
checking if gcc supports -O3 flag... yes
checking if gcc supports -fomit-frame-pointer flag... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/libaacs.pc
config.status: creating src/libaacs/aacs-version.h
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
  YACC     src/file/keydbcfg-parser.c
  LEX      src/file/keydbcfg-lexer.c
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:1.1-5: warning: POSIX Yacc does not support %code [-Wyacc]
    1 | %code requires {
      | ^~~~~
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:22.1-5: warning: POSIX Yacc does not support %code [-Wyacc]
   22 | %code {
      | ^~~~~
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:130.1-12: warning: POSIX Yacc does not support %pure-parser [-Wyacc]
  130 | %pure-parser
      | ^~~~~~~~~~~~
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:130.1-12: warning: deprecated directive: ‘%pure-parser’, use ‘%define api.pure’ [-Wdeprecated]
  130 | %pure-parser
      | ^~~~~~~~~~~~
      | %define api.pure
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:131.1-5: warning: POSIX Yacc does not support %yacc [-Wyacc]
  131 | %yacc
      | ^~~~~
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y:131.1-5: warning: duplicate directive [-Wother]
  131 | %yacc
      | ^~~~~
<command line>:1: note: previous declaration
/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1/src/file/keydbcfg-parser.y: warning: fix-its can be applied.  Rerun with option '--update'. [-Wother]
updating src/file/keydbcfg-parser.h
make  all-am
make[1]: Entering directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
  CC       src/libaacs/uk_dump-unit_key.o
  CC       src/libaacs/mkb_dump-mkb.o
  CC       src/util/mkb_dump-strutl.o
  CC       src/util/mkb_dump-logging.o
  CC       src/examples/aacs_info-aacs_info.o
  CC       src/libaacs/aacs.lo
  CC       src/libaacs/cci.lo
  CC       src/libaacs/content_cert.lo
  CC       src/libaacs/crypto.lo
  CC       src/libaacs/mkb.lo
  CC       src/libaacs/mmc.lo
  CC       src/libaacs/unit_key.lo
  CC       src/file/file.lo
  CC       src/file/filesystem.lo
  CC       src/file/keydbcfg.lo
  CC       src/file/keydbcfg-parser.lo
  CC       src/file/keydbcfg-lexer.lo
  CC       src/util/logging.lo
  CC       src/util/strutl.lo
  CC       src/file/dirs_xdg.lo
  CC       src/file/file_posix.lo
  CC       src/file/mmc_device_linux.lo
  CC       src/file/path.lo
  CC       src/devtools/parser_test-parser_test.o
  CC       src/file/parser_test-keydbcfg-parser.o
  CC       src/file/parser_test-keydbcfg-lexer.o
src/file/mmc_device_linux.c: In function 'device_send_cmd':
src/file/mmc_device_linux.c:107:2: warning: #warning no MMC drive support [-Wcpp]
  107 | #warning no MMC drive support
      |  ^~~~~~~
  CC       src/util/parser_test-strutl.o
  CC       src/util/parser_test-logging.o
  CC       src/devtools/uk_dump-uk_dump.o
  CC       src/util/uk_dump-logging.o
  CC       src/devtools/mkb_dump-mkb_dump.o
  CCLD     libaacs.la
  CCLD     mkb_dump
  CCLD     aacs_info
  CCLD     parser_test
  CCLD     uk_dump
make[1]: Leaving directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
>>> libaacs: Entering fakeroot...
make  install-am
make[1]: Entering directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
make[2]: Entering directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
 build-aux/install-sh -c -d '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib'
 build-aux/install-sh -c -d '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib/pkgconfig'
 build-aux/install-sh -c -d '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/include/libaacs'
 /bin/sh ./libtool   --mode=install /usr/bin/install -c   libaacs.la '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib'
 /usr/bin/install -c -m 644 src/libaacs.pc '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 src/libaacs/aacs.h src/file/filesystem.h src/libaacs/aacs-version.h '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/include/libaacs'
libtool: install: /usr/bin/install -c .libs/libaacs.so.0.7.2 /home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib/libaacs.so.0.7.2
libtool: install: (cd /home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib && { ln -s -f libaacs.so.0.7.2 libaacs.so.0 || { rm -f libaacs.so.0 && ln -s libaacs.so.0.7.2 libaacs.so.0; }; })
libtool: install: (cd /home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib && { ln -s -f libaacs.so.0.7.2 libaacs.so || { rm -f libaacs.so && ln -s libaacs.so.0.7.2 libaacs.so; }; })
libtool: install: /usr/bin/install -c .libs/libaacs.lai /home/buildozer/aports/community/libaacs/pkg/libaacs/usr/lib/libaacs.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 build-aux/install-sh -c -d '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/bin'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c aacs_info '/home/buildozer/aports/community/libaacs/pkg/libaacs/usr/bin'
libtool: warning: 'libaacs.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/aacs_info /home/buildozer/aports/community/libaacs/pkg/libaacs/usr/bin/aacs_info
make[2]: Leaving directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
make[1]: Leaving directory '/home/buildozer/aports/community/libaacs/src/libaacs-0.11.1'
>>> libaacs-dev*: Running split function dev...
>>> libaacs-dev*: Preparing subpackage libaacs-dev...
>>> libaacs-dev*: Stripping binaries
>>> libaacs-dev*: Running postcheck for libaacs-dev
>>> libaacs*: Running postcheck for libaacs
>>> libaacs*: Preparing package libaacs...
>>> libaacs*: Stripping binaries
>>> libaacs-dev*: Scanning shared objects
>>> libaacs*: Scanning shared objects
>>> libaacs-dev*: Tracing dependencies...
	libaacs=0.11.1-r1
	pkgconfig
>>> libaacs-dev*: Package size: 44.0 KB
>>> libaacs-dev*: Compressing data...
>>> libaacs-dev*: Create checksum...
>>> libaacs-dev*: Create libaacs-dev-0.11.1-r1.apk
>>> libaacs*: Tracing dependencies...
	so:libc.musl-s390x.so.1
	so:libgcrypt.so.20
	so:libgpg-error.so.0
>>> libaacs*: Package size: 148.0 KB
>>> libaacs*: Compressing data...
>>> libaacs*: Create checksum...
>>> libaacs*: Create libaacs-0.11.1-r1.apk
>>> libaacs: Build complete at Wed, 01 Nov 2023 02:06:59 +0000 elapsed time 0h 0m 11s
>>> libaacs: Cleaning up srcdir
>>> libaacs: Cleaning up pkgdir
>>> libaacs: Uninstalling dependencies...
(1/8) Purging .makedepends-libaacs (20231101.020654)
(2/8) Purging bison (3.8.2-r1)
(3/8) Purging flex (2.6.4-r6)
(4/8) Purging m4 (1.4.19-r3)
(5/8) Purging libgcrypt-dev (1.10.2-r2)
(6/8) Purging libgcrypt (1.10.2-r2)
(7/8) Purging libgpg-error-dev (1.47-r2)
(8/8) Purging libgpg-error (1.47-r2)
Executing busybox-1.36.1-r13.trigger
OK: 435 MiB in 106 packages
>>> libaacs: Updating the community/s390x repository index...
>>> libaacs: Signing the index...