>>> gptfdisk: Building main/gptfdisk 1.0.10-r1 (using abuild 3.13.0-r2) started Sun, 21 Apr 2024 08:11:58 +0000
>>> gptfdisk: Checking sanity of /home/buildozer/aports/main/gptfdisk/APKBUILD...
>>> gptfdisk: Analyzing dependencies...
>>> gptfdisk: Installing for build: build-base ncurses-dev e2fsprogs-dev popt-dev linux-headers
(1/51) Installing libformw (6.4_p20240330-r0)
(2/51) Installing libmenuw (6.4_p20240330-r0)
(3/51) Installing libpanelw (6.4_p20240330-r0)
(4/51) Installing libncurses++ (6.4_p20240330-r0)
(5/51) Installing ncurses-dev (6.4_p20240330-r0)
(6/51) Installing libeconf (0.6.2-r0)
(7/51) Installing libblkid (2.40-r2)
(8/51) Installing libuuid (2.40-r2)
(9/51) Installing libfdisk (2.40-r2)
(10/51) Installing libmount (2.40-r2)
(11/51) Installing libsmartcols (2.40-r2)
(12/51) Installing readline (8.2.10-r0)
(13/51) Installing sqlite (3.45.3-r0)
(14/51) Installing sqlite-libs (3.45.3-r0)
(15/51) Installing sqlite-dev (3.45.3-r0)
(16/51) Installing util-linux (2.40-r2)
(17/51) Installing setarch (2.40-r2)
(18/51) Installing util-linux-misc (2.40-r2)
(19/51) Installing skalibs (2.14.1.1-r0)
(20/51) Installing utmps-libs (0.1.2.2-r1)
(21/51) Installing linux-pam (1.6.0-r0)
(22/51) Installing runuser (2.40-r2)
(23/51) Installing mount (2.40-r2)
(24/51) Installing losetup (2.40-r2)
(25/51) Installing hexdump (2.40-r2)
(26/51) Installing uuidgen (2.40-r2)
(27/51) Installing blkid (2.40-r2)
(28/51) Installing sfdisk (2.40-r2)
(29/51) Installing mcookie (2.40-r2)
(30/51) Installing agetty (2.40-r2)
(31/51) Installing wipefs (2.40-r2)
(32/51) Installing cfdisk (2.40-r2)
(33/51) Installing umount (2.40-r2)
(34/51) Installing flock (2.40-r2)
(35/51) Installing lsblk (2.40-r2)
(36/51) Installing libcap-ng (0.8.4-r0)
(37/51) Installing setpriv (2.40-r2)
(38/51) Installing logger (2.40-r2)
(39/51) Installing partx (2.40-r2)
(40/51) Installing fstrim (2.40-r2)
(41/51) Installing findmnt (2.40-r2)
(42/51) Installing util-linux-dev (2.40-r2)
(43/51) Installing gawk (5.3.0-r0)
(44/51) Installing libcom_err (1.47.0-r5)
(45/51) Installing e2fsprogs-libs (1.47.0-r5)
(46/51) Installing e2fsprogs-dev (1.47.0-r5)
(47/51) Installing popt-dev (1.19-r3)
(48/51) Installing linux-headers (6.6-r0)
(49/51) Installing .makedepends-gptfdisk (20240421.081159)
(50/51) Installing util-linux-openrc (2.40-r2)
(51/51) Installing agetty-openrc (0.54-r1)
Executing busybox-1.36.1-r25.trigger
OK: 287 MiB in 152 packages
>>> gptfdisk: Cleaning up srcdir
>>> gptfdisk: Cleaning up pkgdir
>>> gptfdisk: Cleaning up tmpdir
>>> gptfdisk: Fetching https://distfiles.alpinelinux.org/distfiles/edge/gptfdisk-1.0.10.tar.gz
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/gptfdisk-1.0.10.tar.gz.part'
gptfdisk-1.0.10.tar. 100% |********************************|  215k  0:00:00 ETA
'/var/cache/distfiles/gptfdisk-1.0.10.tar.gz.part' saved
>>> gptfdisk: Fetching https://distfiles.alpinelinux.org/distfiles/edge/gptfdisk-1.0.10.tar.gz
>>> gptfdisk: Checking sha512sums...
gptfdisk-1.0.10.tar.gz: OK
fix-wrong-include.patch: OK
fix-musl.patch: OK
>>> gptfdisk: Unpacking /var/cache/distfiles/gptfdisk-1.0.10.tar.gz...
>>> gptfdisk: fix-wrong-include.patch
patching file gptcurses.cc
>>> gptfdisk: fix-musl.patch
patching file diskio-unix.cc
Hunk #1 succeeded at 56 (offset 4 lines).
Hunk #2 succeeded at 82 (offset 4 lines).
Hunk #3 succeeded at 315 (offset 4 lines).
Hunk #4 succeeded at 324 (offset 4 lines).
Hunk #5 succeeded at 432 (offset 4 lines).
Hunk #6 succeeded at 492 (offset 4 lines).
TARGET is not set; trying to determine target based on host OS....
Detected OS is Linux
Build target is linux
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o crc32.o crc32.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o support.o support.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o guid.o guid.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gptpart.o gptpart.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o mbrpart.o mbrpart.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o basicmbr.o basicmbr.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o mbr.o mbr.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gpt.o gpt.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o bsd.o bsd.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o parttypes.o parttypes.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o attributes.o attributes.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o diskio.o diskio.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o diskio-unix.o diskio-unix.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gdisk.o gdisk.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gpttext.o gpttext.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o cgdisk.o cgdisk.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gptcurses.o gptcurses.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o sgdisk.o sgdisk.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o gptcl.o gptcl.cc
g++ -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -O2 -Wall -D_FILE_OFFSET_BITS=64   -c -o fixparts.o fixparts.cc
g++ support.o diskio.o diskio-unix.o basicmbr.o mbrpart.o fixparts.o -Wl,--as-needed,-O1,--sort-common  -o fixparts
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o gdisk.o gpttext.o -Wl,--as-needed,-O1,--sort-common -luuid   -o gdisk
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o cgdisk.o gptcurses.o -Wl,--as-needed,-O1,--sort-common -luuid  -lncursesw -o cgdisk
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o sgdisk.o gptcl.o -Wl,--as-needed,-O1,--sort-common -luuid  -lpopt  -o sgdisk
**SUCCESS** Temp disk sucessfully created

**Testing gdisk binary**

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: not present
  BSD: not present
  APM: not present
  GPT: not present

Creating new GPT entries in memory.

Command (? for help): This option deletes all partitions and creates a new protective MBR.
Proceed? (Y/N): 
Command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Create new empty GPT table

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Partition number (1-128, default 1): First sector (34-131038, default = 2048) or {+-}size{KMGTP}: Last sector (2048-131038, default = 129023) or {+-}size{KMGTP}: Current type is 8300 (Linux filesystem)
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux filesystem'

Command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Create new partition

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Using 1
Enter name: 
Command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Change partition 1 name (Linux filesystem -> jfhRQZnS)

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Using 1
Current type is 8300 (Linux filesystem)
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux swap'

Command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Change partition 1 type (8300 -> 8200)

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Enter backup filename to save: The operation has completed successfully.

Command (? for help): 
**SUCCESS** GPT data backuped sucessfully
GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Using 1

Command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Delete partition 1

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): 
Recovery/transformation command (? for help): b	use backup GPT header (rebuilding main)
c	load backup partition table from disk (rebuilding main)
d	use main GPT header (rebuilding backup)
e	load main partition table from disk (rebuilding backup)
f	load MBR and build fresh GPT from it
g	convert GPT into MBR and exit
h	make hybrid MBR
i	show detailed information on a partition
l	load partition data from a backup file
m	return to main menu
o	print protective MBR data
p	print the partition table
q	quit without saving changes
t	transform BSD disklabel partition
v	verify disk
w	write table to disk and exit
x	extra functionality (experts only)
?	print this menu

Recovery/transformation command (? for help): Enter backup filename to load: 
Recovery/transformation command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Restore the GPT backup

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): 
Expert command (? for help): Enter the disk's unique GUID ('R' to randomize): The new disk GUID is 679D4322-A507-4DEF-A233-6086B6F5F515

Expert command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** GUID of disk has been sucessfully changed
GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): 
Expert command (? for help): About to wipe out GPT on /tmp/tmp.FdBGGp. Proceed? (Y/N): Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Blank out MBR? (Y/N): **SUCCESS** Wipe GPT table

Creating new GPT entries in memory.
**SUCCESS** EOF successfully exit gdisk

**Testing sgdisk binary**

Creating new GPT entries in memory.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Create new empty GPT table

Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Create new partition

Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Change partition 1 name (Linux filesystem -> jfhRQZnS)

Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Change partition 1 type (8300 -> 8200)

The operation has completed successfully.
**SUCCESS** GPT data backuped sucessfully
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Delete partition 1

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): 
Recovery/transformation command (? for help): b	use backup GPT header (rebuilding main)
c	load backup partition table from disk (rebuilding main)
d	use main GPT header (rebuilding backup)
e	load main partition table from disk (rebuilding backup)
f	load MBR and build fresh GPT from it
g	convert GPT into MBR and exit
h	make hybrid MBR
i	show detailed information on a partition
l	load partition data from a backup file
m	return to main menu
o	print protective MBR data
p	print the partition table
q	quit without saving changes
t	transform BSD disklabel partition
v	verify disk
w	write table to disk and exit
x	extra functionality (experts only)
?	print this menu

Recovery/transformation command (? for help): Enter backup filename to load: 
Recovery/transformation command (? for help): 
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.FdBGGp.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** Restore the GPT backup

Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.
**SUCCESS** GUID of disk has been sucessfully changed
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
**SUCCESS** Wipe GPT table

Creating new GPT entries in memory.
**SUCCESS** EOF successfully exit gdisk
>>> gptfdisk: Entering fakeroot...
>>> gptfdisk-doc*: Running split function doc...
>>> gptfdisk-doc*: Preparing subpackage gptfdisk-doc...
>>> gptfdisk-doc*: Running postcheck for gptfdisk-doc
>>> sgdisk*: Running split function sgdisk...
'/home/buildozer/aports/main/gptfdisk/pkg/gptfdisk/usr/bin/sgdisk' -> '/home/buildozer/aports/main/gptfdisk/pkg/sgdisk/usr/bin/sgdisk'
>>> sgdisk*: Preparing subpackage sgdisk...
>>> sgdisk*: Stripping binaries
>>> sgdisk*: Running postcheck for sgdisk
>>> gptfdisk*: Running postcheck for gptfdisk
>>> gptfdisk*: Preparing package gptfdisk...
>>> gptfdisk*: Stripping binaries
>>> gptfdisk-doc*: Scanning shared objects
>>> gptfdisk*: Scanning shared objects
>>> sgdisk*: Scanning shared objects
>>> gptfdisk-doc*: Tracing dependencies...
>>> gptfdisk-doc*: Package size: 60.0 KB
>>> gptfdisk-doc*: Compressing data...
>>> gptfdisk-doc*: Create checksum...
>>> gptfdisk-doc*: Create gptfdisk-doc-1.0.10-r1.apk
>>> gptfdisk*: Tracing dependencies...
	so:libc.musl-armv7.so.1
	so:libgcc_s.so.1
	so:libncursesw.so.6
	so:libstdc++.so.6
	so:libuuid.so.1
>>> gptfdisk*: Package size: 408.0 KB
>>> gptfdisk*: Compressing data...
>>> gptfdisk*: Create checksum...
>>> gptfdisk*: Create gptfdisk-1.0.10-r1.apk
>>> sgdisk*: Tracing dependencies...
	so:libc.musl-armv7.so.1
	so:libgcc_s.so.1
	so:libpopt.so.0
	so:libstdc++.so.6
	so:libuuid.so.1
>>> sgdisk*: Package size: 176.0 KB
>>> sgdisk*: Compressing data...
>>> sgdisk*: Create checksum...
>>> sgdisk*: Create sgdisk-1.0.10-r1.apk
>>> gptfdisk: Build complete at Sun, 21 Apr 2024 08:12:24 +0000 elapsed time 0h 0m 26s
>>> gptfdisk: Cleaning up srcdir
>>> gptfdisk: Cleaning up pkgdir
>>> gptfdisk: Uninstalling dependencies...
(1/51) Purging .makedepends-gptfdisk (20240421.081159)
(2/51) Purging ncurses-dev (6.4_p20240330-r0)
(3/51) Purging libncurses++ (6.4_p20240330-r0)
(4/51) Purging libpanelw (6.4_p20240330-r0)
(5/51) Purging e2fsprogs-dev (1.47.0-r5)
(6/51) Purging util-linux-dev (2.40-r2)
(7/51) Purging gawk (5.3.0-r0)
(8/51) Purging e2fsprogs-libs (1.47.0-r5)
(9/51) Purging libcom_err (1.47.0-r5)
(10/51) Purging popt-dev (1.19-r3)
(11/51) Purging linux-headers (6.6-r0)
(12/51) Purging agetty-openrc (0.54-r1)
(13/51) Purging agetty (2.40-r2)
(14/51) Purging blkid (2.40-r2)
(15/51) Purging cfdisk (2.40-r2)
(16/51) Purging findmnt (2.40-r2)
(17/51) Purging flock (2.40-r2)
(18/51) Purging fstrim (2.40-r2)
(19/51) Purging hexdump (2.40-r2)
(20/51) Purging libformw (6.4_p20240330-r0)
(21/51) Purging libmenuw (6.4_p20240330-r0)
(22/51) Purging logger (2.40-r2)
(23/51) Purging losetup (2.40-r2)
(24/51) Purging lsblk (2.40-r2)
(25/51) Purging mcookie (2.40-r2)
(26/51) Purging mount (2.40-r2)
(27/51) Purging partx (2.40-r2)
(28/51) Purging runuser (2.40-r2)
(29/51) Purging setpriv (2.40-r2)
(30/51) Purging sfdisk (2.40-r2)
(31/51) Purging sqlite-dev (3.45.3-r0)
(32/51) Purging sqlite (3.45.3-r0)
(33/51) Purging umount (2.40-r2)
(34/51) Purging util-linux-misc (2.40-r2)
(35/51) Purging setarch (2.40-r2)
(36/51) Purging util-linux-openrc (2.40-r2)
(37/51) Purging uuidgen (2.40-r2)
(38/51) Purging wipefs (2.40-r2)
(39/51) Purging libfdisk (2.40-r2)
(40/51) Purging libmount (2.40-r2)
(41/51) Purging libblkid (2.40-r2)
(42/51) Purging libcap-ng (0.8.4-r0)
(43/51) Purging libeconf (0.6.2-r0)
(44/51) Purging libsmartcols (2.40-r2)
(45/51) Purging libuuid (2.40-r2)
(46/51) Purging linux-pam (1.6.0-r0)
(47/51) Purging readline (8.2.10-r0)
(48/51) Purging utmps-libs (0.1.2.2-r1)
(49/51) Purging skalibs (2.14.1.1-r0)
(50/51) Purging util-linux (2.40-r2)
(51/51) Purging sqlite-libs (3.45.3-r0)
Executing busybox-1.36.1-r25.trigger
OK: 270 MiB in 101 packages
>>> gptfdisk: Updating the main/armv7 repository index...
>>> gptfdisk: Signing the index...