>>> redis: Building community/redis 7.2.9-r0 (using abuild 3.14.1-r4) started Fri, 30 May 2025 00:25:44 +0000 >>> redis: Validating /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r1) (2/8) Installing openssl-dev (3.3.3-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20250530.002545) Executing busybox-1.37.0-r12.trigger OK: 409 MiB in 110 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.21/redis-7.2.9.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.21/redis-7.2.9.tar.gz >>> redis: Checking sha512sums... redis-7.2.9.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/v3.21/redis-7.2.9.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise cd linenoise && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hiredis' MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c ar rcs libfpconv.a fpconv_dtoa.o gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ar rcs libhiredis_ssl.a ssl.o ranlib liblua.a make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hiredis' gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-server LINK redis-cli INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 72595 Testing unit/printver [ready]: 72596 Testing unit/dump [ready]: 72597 Testing unit/auth [ready]: 72598 Testing unit/protocol [ready]: 72599 Testing unit/keyspace [ready]: 72600 Testing unit/scan [ready]: 72601 Testing unit/info [ready]: 72602 Testing unit/info-command [ready]: 72603 Testing unit/type/string [ready]: 72604 Testing unit/type/incr [ready]: 72605 Testing unit/type/list [ready]: 72607 Testing unit/type/list-2 [ready]: 72606 Testing unit/type/list-3 [ready]: 72608 Testing unit/type/set [ready]: 72609 Testing unit/type/zset [ready]: 72610 Testing unit/type/hash [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (17 ms) [ok]: INCR against non existing key (6 ms) [ok]: INCR against key created by incr itself (2 ms) [ok]: DECR against key created by incr (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (3 ms) [ok]: reg node check compression with insert and pop (8 ms) [ok]: reg node check compression combined with trim (1 ms) Testing Redis version 7.2.9 (00000000) [ok]: DECR against key is not exist and incr (7 ms) [ok]: AUTH fails if there is no password configured server side (6 ms) [ok]: Arity check for auth command (4 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (23 ms) [ok]: reg node check compression with lset (11 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (14 ms) [ok]: INCR against key originally set with SET (11 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (1 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: SADD against non set (0 ms) [ok]: SADD a non-integer against a small intset (1 ms) [ok]: SET and GET an item (13 ms) [ok]: INCR over 32bit value (7 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: plain node check compression (11 ms) [ok]: DEL against a single item (16 ms) [ok]: HSET/HLEN - Small hash creation (29 ms) [ok]: INCR fails against key with spaces (left) (4 ms) [ok]: Check encoding - listpack (9 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: plain node check compression using lset (1 ms) [ok]: Is the small hash encoded with a listpack? (3 ms) [ok]: SADD a non-integer against a large intset (10 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (19 ms) [ok]: Explicit regression for a list bug (12 ms) [ok]: SET and GET an empty item (13 ms) [ok]: SADD an integer larger than 64 bits to a large intset (9 ms) [ok]: INCR fails against key with spaces (right) (12 ms) [ok]: INCR fails against key with spaces (both) (2 ms) [ok]: Vararg DEL (17 ms) [ok]: info command with at most one sub command (13 ms) [ok]: RESTORE can set an absolute expire (14 ms) [ok]: DECRBY negation overflow (9 ms) [ok]: Untagged multi-key commands (10 ms) [ok]: info command with one sub-section (10 ms) [ok]: INCR fails against a key holding a list (8 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: ZSET basic ZADD and score update - listpack (32 ms) [ok]: RESTORE with ABSTTL in the past (14 ms) [ok]: INCR uses shared objects in the 0-9999 range (3 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (3 ms) [ok]: INCR can modify objects in-place (2 ms) [ok]: info command with multiple sub-sections (6 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (3 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: No negative zero (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (8 ms) [ok]: incr operation should update encoding from raw to int (5 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (38 ms) [ok]: KEYS with pattern (23 ms) [ok]: decr operation should update encoding from raw to int (2 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: Handle an empty query (56 ms) [ok]: RESTORE can set LRU (19 ms) [ok]: ZADD XX option without key - listpack (8 ms) [ok]: KEYS to get all keys (8 ms) [ok]: DBSIZE (9 ms) [ok]: ZADD XX existing key - listpack (16 ms) [ok]: RESTORE can set LFU (22 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (9 ms) [1/92 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: Very big payload in GET/SET (69 ms) [ok]: RESTORE returns an error of the key already exists (7 ms) [ok]: DEL all keys (23 ms) [ok]: ZADD XX updates existing elements score - listpack (9 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (3 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (2 ms) [ok]: SCAN basic (149 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (9 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: Negative multibulk length (55 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [2/92 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: RESTORE can overwrite an existing key with REPLACE (25 ms) [ok]: ZADD GT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (3 ms) [ok]: ZADD INCR LT/GT with inf - listpack (3 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (2 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (2 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (3 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (1 ms) [ok]: ZRANGE basics - listpack (3 ms) [ok]: Out of range multibulk length (27 ms) [ok]: ZREVRANGE basics - listpack (4 ms) [ok]: ZRANK/ZREVRANK basics - listpack (4 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (1 ms) [ok]: Regression for quicklist #3343 bug (143 ms) [ok]: latencystats: disable/enable (29 ms) [ok]: Wrong multibulk payload header (19 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (10 ms) [ok]: Negative multibulk payload length (6 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (2 ms) [ok]: Out of range multibulk payload length (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (2 ms) [3/92 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: Non-number multibulk payload length (6 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (4 ms) [ok]: ZLEXCOUNT advanced - listpack (4 ms) [ok]: Multi bulk request not followed by bulk arguments (8 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (4 ms) [ok]: Generic wrong number of args (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: Unbalanced number of quotes (3 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (13 ms) [ok]: Check compression with recompress (44 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: latencystats: configure percentiles (42 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: ZREMRANGEBYLEX basics - listpack (10 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (0 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: latencystats: bad configure percentiles (19 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (2 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: Protocol desync regression test #1 (36 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: AUTH fails when a wrong password is given (2 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (5 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: ZINTERSTORE with NaN weights - listpack (1 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (3 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: AUTH succeeds when the right password is given (3 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: latencystats: blocking commands (27 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (3 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (7 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (7 ms) [ok]: latencystats: subcommands (13 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (157 ms) [ok]: DUMP of non existing key returns nil (3 ms) [ok]: Protocol desync regression test #2 (76 ms) [ok]: SCAN COUNT (207 ms) [ok]: latencystats: measure latency (66 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (278 ms) [ok]: Test LPUSH and LPOP on plain nodes (76 ms) [ok]: errorstats: failed call authentication error (23 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (26 ms) [ok]: Protocol desync regression test #3 (72 ms) [ok]: Test LINDEX and LINSERT on plain nodes (47 ms) [ok]: raw protocol response (2 ms) [ok]: raw protocol response - deferred (3 ms) [ok]: errorstats: failed call within MULTI/EXEC (36 ms) [ok]: XADD with MAXLEN option (147 ms) [ok]: raw protocol response - multiline (3 ms) [ok]: RESP3 attributes (6 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (66 ms) [ok]: RESP3 attributes readraw (6 ms) [ok]: HRANDFIELD - listpack (366 ms) [ok]: RESP3 attributes on RESP2 (4 ms) [ok]: errorstats: failed call within LUA (23 ms) [ok]: Test LTRIM on plain nodes (30 ms) [ok]: test big number parsing (3 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (60 ms) [ok]: test bool parsing (9 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (20 ms) [ok]: Crash due to wrongly recompress after lrem (223 ms) [ok]: test verbatim str parsing (5 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (13 ms) [ok]: errorstats: failed call NOSCRIPT error (26 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (13 ms) [ok]: errorstats: failed call NOGROUP error (6 ms) [ok]: Test LREM on plain nodes (33 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: errorstats: rejected call within MULTI/EXEC (3 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: errorstats: rejected call by OOM error (3 ms) [ok]: test large number of args (31 ms) [ok]: XREADGROUP will return only new elements (17 ms) [ok]: For unauthenticated clients output buffer is limited (196 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: Test LPOS on plain nodes (26 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (47 ms) [ok]: Listpack: SORT BY key (3 ms) [ok]: SCAN MATCH (165 ms) [ok]: Listpack: SORT BY key with limit (7 ms) [ok]: test argument rewriting - issue 9598 (27 ms) [ok]: Listpack: SORT BY hash field (4 ms) [ok]: XREADGROUP can read the history of the elements we own (33 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (70 ms) [ok]: XPENDING is able to return pending items (7 ms) [ok]: XPENDING can return single consumer items (7 ms) [ok]: XPENDING only group (5 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (46 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (28 ms) [ok]: Variadic SADD (16 ms) [ok]: MIGRATE is caching connections (265 ms) [ok]: XPENDING with IDLE (38 ms) [ok]: XPENDING with exclusive range intervals works as expected (10 ms) [ok]: Test LMOVE on plain nodes (90 ms) [ok]: stats: eventloop metrics (116 ms) [ok]: XACK is able to remove items from the consumer/group PEL (26 ms) [ok]: XACK can't remove the same item multiple times (6 ms) [ok]: XACK is able to accept multiple arguments (7 ms) [ok]: SCAN TYPE (138 ms) [ok]: XACK should fail if got at least one invalid ID (47 ms) [ok]: Test LSET with packed / plain combinations (84 ms) [ok]: SCAN unknown type (86 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (66 ms) [ok]: Test LSET with packed is split in the middle (100 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (50 ms) [ok]: SCAN with expired keys (91 ms) [ok]: AUTH fails when binary password is wrong (16 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (47 ms) [ok]: AUTH succeeds when binary password is correct (6 ms) [ok]: Regression for a crash with blocking ops and pipelining (20 ms) [ok]: Test LSET with packed consist only one item (116 ms) [ok]: XADD with MAXLEN option and the '=' argument (485 ms) [4/92 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: Blocking XREADGROUP will not reply with an empty array (93 ms) [ok]: Crash due to delete entry from a compress quicklist node (41 ms) [ok]: Crash due to split quicklist node wrongly (26 ms) [ok]: Blocking XREADGROUP: key deleted (39 ms) [ok]: Quicklist: SORT BY key (19 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (40 ms) [ok]: XADD with MAXLEN option and the '~' argument (107 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: Quicklist: SORT BY hash field (20 ms) [ok]: HRANDFIELD - hashtable (547 ms) [ok]: HRANDFIELD with RESP3 (26 ms) [ok]: HRANDFIELD count of 0 is handled correctly (7 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (59 ms) [ok]: HRANDFIELD count overflow (24 ms) [ok]: HRANDFIELD with against non existing key (6 ms) [ok]: Set encoding after DEBUG RELOAD (538 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (7 ms) [ok]: SREM basics - $type (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (6 ms) [ok]: Blocking XREADGROUP: flushed DB (47 ms) [ok]: XADD with MINID option (125 ms) [ok]: SREM basics - $type (34 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (8 ms) [ok]: SINTERCARD with illegal arguments (2 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (1 ms) [ok]: EXPIRE - set timeouts multiple times (40 ms) [ok]: EXPIRE - It should be still possible to read 'x' (6 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (67 ms) [ok]: LPOS basic usage - quicklist (60 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (20 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (66 ms) [ok]: DEL against expired key (1123 ms) [ok]: LPOS COUNT option (13 ms) [ok]: LPOS COUNT + RANK option (7 ms) [ok]: LPOS non existing key (3 ms) [ok]: EXISTS (27 ms) [ok]: LPOS no match (6 ms) [ok]: XREAD and XREADGROUP against wrong parameter (34 ms) [ok]: Zero length value in key. SET/GET/EXISTS (30 ms) [ok]: Commands pipelining (7 ms) [ok]: LPOS MAXLEN (33 ms) [ok]: SCAN with expired keys with TYPE filter (491 ms) [ok]: Non existing command (6 ms) [ok]: Blocking XREAD: key deleted (36 ms) [ok]: LPOS when RANK is greater than matches (17 ms) [ok]: SSCAN with encoding intset (20 ms) [ok]: RENAME basic usage (17 ms) [ok]: RENAME source key should no longer exist (3 ms) [ok]: SSCAN with encoding listpack (20 ms) [ok]: RENAME against already existing key (27 ms) [ok]: Blocking XREAD: key type changed with SET (47 ms) [ok]: RENAMENX basic usage (30 ms) [ok]: RENAMENX against already existing key (20 ms) [ok]: RENAMENX against already existing key (2) (13 ms) [ok]: RENAME against non existing source key (7 ms) [ok]: SSCAN with encoding hashtable (83 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (74 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (4 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (4 ms) [ok]: RENAME where source and dest key are the same (existing) (13 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: HSCAN with encoding listpack (17 ms) [ok]: RENAMENX where source and dest key are the same (existing) (10 ms) [ok]: RENAME where source and dest key are the same (non existing) (14 ms) [ok]: RENAME with volatile key, should move the TTL as well (53 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (212 ms) [ok]: LPOP/RPOP with wrong number of arguments (13 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (43 ms) [ok]: DEL all keys again (DB 0) (27 ms) [ok]: DEL all keys again (DB 1) (23 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (83 ms) [ok]: LPOS basic usage - listpack (26 ms) [ok]: COPY basic usage for string (60 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (14 ms) [ok]: COPY for string can replace an existing key with REPLACE option (16 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (43 ms) [ok]: LPOS COUNT option (24 ms) [ok]: LPOS COUNT + RANK option (13 ms) [ok]: LPOS non existing key (7 ms) [ok]: LPOS no match (13 ms) [ok]: LPOS MAXLEN (17 ms) [ok]: COPY for string ensures that copied data is independent of copying data (77 ms) [ok]: HSCAN with encoding hashtable (339 ms) [ok]: LPOS when RANK is greater than matches (10 ms) [ok]: ZSCAN with encoding listpack (2 ms) [ok]: COPY for string does not copy data to no-integer DB (13 ms) [ok]: COPY can copy key expire metadata as well (34 ms) [ok]: COPY does not create an expire if it does not exist (33 ms) [ok]: ZSCAN with encoding skiplist (74 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (80 ms) [ok]: LPOP/RPOP with wrong number of arguments (6 ms) [ok]: SCAN guarantees check under write load (21 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: SSCAN with PATTERN (1 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (23 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (10 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (10 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (17 ms) [ok]: ZSCAN scores: regression test for issue #2175 (64 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (10 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (10 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (17 ms) [ok]: MASTERAUTH test with binary password (950 ms) [ok]: COPY basic usage for list - quicklist (114 ms) [ok]: Variadic RPUSH/LPUSH (14 ms) [ok]: DEL a list (9 ms) [ok]: COPY basic usage for list - listpack (66 ms) [ok]: BLPOP: single existing list - quicklist (86 ms) [5/92 done]: unit/auth (2 seconds) Testing unit/other [ok]: COPY basic usage for $type set (67 ms) [ok]: stats: instantaneous metrics (1617 ms) [ok]: COPY basic usage for $type set (73 ms) [ok]: BLPOP: multiple existing lists - quicklist (160 ms) [ok]: BLPOP: second list has an entry - quicklist (84 ms) [ok]: stats: debug metrics (136 ms) [ok]: Coverage: HELP commands (53 ms) [ok]: Coverage: MEMORY MALLOC-STATS (7 ms) [ok]: Coverage: MEMORY PURGE (6 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (77 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1016 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (3 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (2 ms) [ok]: SAVE - make sure there are all the types as values (63 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (94 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (46 ms) [6/92 done]: unit/info (3 seconds) Testing unit/multi [ok]: BRPOPLPUSH - quicklist (47 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: BLMOVE left right - quicklist (46 ms) [ok]: MULTI / EXEC basics (3 ms) [ok]: BLMOVE right left - quicklist (47 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (2 ms) [ok]: MULTI where commands alter argc/argv (3 ms) [ok]: HRANDFIELD with - hashtable (1649 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (0 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (4 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (3 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (3 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: BLMOVE right right - quicklist (47 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (2 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (2 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (5 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (2 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (7 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (3 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (2 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (6 ms) [ok]: HRANDFIELD with - listpack (115 ms) [ok]: EXEC fail on lazy expired WATCHed key (106 ms) [ok]: WATCH stale keys should not fail EXEC (37 ms) [ok]: HSET/HLEN - Big hash creation (82 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (1 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (60 ms) [ok]: HGET against the big hash (58 ms) [ok]: HGET against non existing key (1 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (1 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (63 ms) [ok]: HMSET - big hash (56 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (0 ms) [ok]: XCLAIM can claim PEL items from another consumer (610 ms) [ok]: After successful EXEC key is no longer watched (57 ms) [ok]: After failed EXEC key is no longer watched (37 ms) [ok]: HMGET - big hash (55 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (1 ms) [ok]: It is possible to UNWATCH (33 ms) [ok]: UNWATCH when there is nothing watched works as expected (3 ms) [ok]: FLUSHALL is able to touch the watched keys (24 ms) [ok]: HGETALL - big hash (39 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (1 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (1 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: FLUSHALL does not touch non affected keys (20 ms) [ok]: FLUSHDB is able to touch the watched keys (27 ms) [ok]: FLUSHDB does not touch non affected keys (26 ms) [ok]: HSTRLEN against the big hash (68 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (2 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2117 ms) [ok]: SWAPDB is able to touch the watched keys that exist (30 ms) [ok]: Hash fuzzing #1 - 10 fields (23 ms) [ok]: Hash fuzzing #2 - 10 fields (16 ms) [ok]: EXPIRE - write on expire should work (33 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (47 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (27 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (13 ms) [ok]: SETEX - Check value (7 ms) [ok]: SETEX - Overwrite old key (13 ms) [ok]: SWAPDB does not touch watched stale keys (56 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (53 ms) [ok]: XCLAIM without JUSTID increments delivery count (407 ms) [ok]: XADD mass insertion and XLEN (2355 ms) [ok]: XADD with ID 0-0 (13 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (60 ms) [ok]: COPY basic usage for $type set (1293 ms) [ok]: XADD with LIMIT delete entries no more than limit (23 ms) [ok]: XRANGE COUNT works as expected (7 ms) [ok]: XREVRANGE COUNT works as expected (7 ms) [ok]: WATCH is able to remember the DB a key belongs to (59 ms) [ok]: COPY basic usage for listpack sorted set (54 ms) [ok]: WATCH will consider touched keys target of EXPIRE (37 ms) [ok]: XCLAIM same consumer (203 ms) [ok]: BRPOPLPUSH timeout (1025 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: XRANGE can be used to iterate the whole stream (465 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (122 ms) [ok]: ZDIFF fuzzing - listpack (3941 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (2 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (2 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (4 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (7 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (4 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (8 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (610 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (1 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (307 ms) [ok]: SETEX - Wait for the key to expire (1110 ms) [ok]: SETEX - Wrong time parameter (6 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: COPY basic usage for skiplist sorted set (933 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XINFO FULL output (3 ms) [ok]: PERSIST can undo an EXPIRE (34 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (17 ms) [ok]: Hash fuzzing #1 - 512 fields (1248 ms) [ok]: COPY basic usage for listpack hash (67 ms) [ok]: FUZZ stresser with data model binary (2108 ms) [ok]: Consumer seen-time and active-time (208 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: WATCH will consider touched expired keys (1150 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (43 ms) [ok]: DISCARD should UNWATCH all the keys (53 ms) [ok]: Generated sets must be encoded correctly - regular (20 ms) [ok]: SINTER with two sets - regular (1 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (28 ms) [ok]: SUNION with two sets - regular (22 ms) [ok]: Very big payload random access (4873 ms) [ok]: SUNIONSTORE with two sets - regular (30 ms) [ok]: MULTI / EXEC is not propagated (single write command) (150 ms) [ok]: SINTER against three sets - regular (7 ms) [ok]: FUZZ stresser with data model alpha (441 ms) [ok]: SINTERCARD against three sets - regular (27 ms) [ok]: XREADGROUP with NOACK creates consumer (110 ms) [ok]: SINTERSTORE with three sets - regular (13 ms) [ok]: SUNION with non existing keys - regular (22 ms) [ok]: SDIFF with two sets - regular (4 ms) [ok]: COPY basic usage for hashtable hash (503 ms) [ok]: SDIFF with three sets - regular (6 ms) [ok]: SDIFFSTORE with three sets - regular (14 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (26 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (126 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (197 ms) [ok]: Big Quicklist: SORT BY key (637 ms) [ok]: Big Quicklist: SORT BY key with limit (11 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (126 ms) [ok]: Hash fuzzing #2 - 512 fields (700 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1030 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (1 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (25 ms) [ok]: Consumer group lag with XDELs (7 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (2 ms) [ok]: Consumer group lag with XTRIM (3 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (150 ms) [ok]: FUZZ stresser with data model compr (404 ms) [ok]: COPY basic usage for stream (399 ms) [ok]: COPY basic usage for stream-cgroups (6 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (0 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (6 ms) [ok]: RANDOMKEY against empty DB (1 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (1 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (107 ms) [ok]: Regression for pattern matching very long nested loops (91 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (106 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (12 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (36 ms) [ok]: EXPIRE precision is now the millisecond (1130 ms) [7/92 done]: unit/keyspace (6 seconds) Testing unit/quit [ok]: MULTI / EXEC with REPLICAOF (119 ms) [ok]: DISCARD should not fail during OOM (47 ms) [ok]: PSETEX can set sub-second expires (123 ms) [ok]: Big Quicklist: SORT BY hash field (641 ms) [ok]: QUIT returns OK (14 ms) [ok]: PEXPIRE can set sub-second expires (130 ms) [ok]: Pipelined commands after QUIT must not be executed (26 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (24 ms) [ok]: Intset: SORT BY key (2 ms) [ok]: Intset: SORT BY key with limit (2 ms) [ok]: Intset: SORT BY hash field (4 ms) [ok]: BGSAVE (190 ms) [ok]: SELECT an out of range DB (3 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1090 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [8/92 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: PEXPIREAT can set sub-second expires (227 ms) [ok]: TTL returns time to live in seconds (17 ms) [ok]: PTTL returns time to live in milliseconds (16 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (923 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (37 ms) [ok]: Hash table: SORT BY key (10 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: Hash table: SORT BY hash field (10 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2241 ms) [ok]: XRANGE exclusive ranges (5 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MULTI and script timeout (470 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (33 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (19 ms) [ok]: Hash ziplist of various encodings (103 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (20 ms) [ok]: Hash ziplist of various encodings - sanitize dump (3 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [9/92 done]: unit/type/hash (7 seconds) Testing unit/acl [ok]: BLPOP: timeout (1098 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (897 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (0 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (133 ms) [ok]: Connections start with the default user (6 ms) [ok]: It is possible to create new users (7 ms) [ok]: Coverage: ACL USERS (3 ms) [ok]: Usernames can not contain spaces or null characters (7 ms) [ok]: New users start disabled (13 ms) [ok]: Enabling the user allows the login (17 ms) [ok]: Only the set of correct passwords work (23 ms) [ok]: EXEC and script timeout (463 ms) [ok]: It is possible to remove passwords from the set of valid ones (13 ms) [ok]: Test password hashes can be added (10 ms) [ok]: Test password hashes validate input (10 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (7 ms) [ok]: Test hashed passwords removal (13 ms) [ok]: By default users are not able to access any command (7 ms) [ok]: By default users are not able to access any key (13 ms) [ok]: It's possible to allow the access of a subset of keys (34 ms) [ok]: By default, only default user is able to publish to any channel (30 ms) [ok]: Redis should actively expire keys incrementally (564 ms) [ok]: By default, only default user is not able to publish to any shard channel (23 ms) [ok]: By default, only default user is able to subscribe to any channel (37 ms) [ok]: By default, only default user is able to subscribe to any shard channel (40 ms) [ok]: By default, only default user is able to subscribe to any pattern (40 ms) [ok]: It's possible to allow publishing to a subset of channels (26 ms) [ok]: It's possible to allow publishing to a subset of shard channels (27 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (156 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (47 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (39 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (63 ms) [ok]: It's possible to allow subscribing to a subset of channels (23 ms) [ok]: MULTI-EXEC body and script timeout (469 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (31 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (23 ms) [ok]: Subscribers are killed when revoked of channel permission (17 ms) [ok]: Subscribers are killed when revoked of channel permission (49 ms) [ok]: Subscribers are killed when revoked of pattern permission (47 ms) [ok]: Subscribers are killed when revoked of allchannels permission (33 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (54 ms) [ok]: LTRIM stress testing - quicklist (7452 ms) [ok]: blocked command gets rejected when reprocessed after permission change (70 ms) [ok]: Users can be configured to authenticate with any password (13 ms) [ok]: ACLs can exclude single commands (20 ms) [ok]: ACLs can include or exclude whole classes of commands (33 ms) [ok]: ACLs can include single subcommands (30 ms) [ok]: BRPOP: timeout (1093 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (2 ms) [ok]: BLMPOP_LEFT: with negative timeout (10 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (20 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (240 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (26 ms) [ok]: just EXEC and script timeout (470 ms) [ok]: ACLs cannot include a subcommand with a specific arg (14 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (20 ms) [ok]: ACLs cannot exclude or include a container command with two args (16 ms) [ok]: exec with write commands and state change (49 ms) [ok]: ACLs including of a type includes also subcommands (22 ms) [ok]: ACLs can block SELECT of all but a specific DB (22 ms) [ok]: ACLs can block all DEBUG subcommands except one (40 ms) [ok]: exec with read commands and stale replica state change (110 ms) [10/92 done]: unit/type/stream-cgroups (8 seconds) Testing unit/acl-v2 [ok]: ACLs set can include subcommands, if already full command exists (63 ms) [ok]: EXEC with only read commands should not be rejected when OOM (50 ms) [ok]: Redis should lazy expire keys (1050 ms) [ok]: EXEC with at least one use-memory command should fail (47 ms) [ok]: XREAD with non empty second stream (1679 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Blocking XREAD will not reply with an empty array (21 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (103 ms) [ok]: Blocking commands ignores the timeout (67 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (34 ms) [ok]: ACL GETUSER is able to translate back command permissions (26 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (5 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (1 ms) [ok]: Test basic multiple selectors (63 ms) [ok]: Test ACL selectors by default have no permissions (10 ms) [ok]: MULTI propagation of PUBLISH (106 ms) [ok]: Test deleting selectors (23 ms) [ok]: Test selector syntax error reports the error in the selector context (33 ms) [ok]: Test flexible selector definition (33 ms) [ok]: MULTI propagation of SCRIPT LOAD (107 ms) [ok]: Test separate read permission (40 ms) [ok]: Test separate write permission (40 ms) [ok]: MULTI propagation of EVAL (77 ms) [ok]: Test separate read and write permissions (33 ms) [ok]: Validate read and write permissions format - empty permission (7 ms) [ok]: Validate read and write permissions format - empty selector (6 ms) [ok]: Validate read and write permissions format - empty pattern (19 ms) [ok]: Validate read and write permissions format - no pattern (16 ms) [ok]: MULTI propagation of SCRIPT FLUSH (97 ms) [ok]: Test separate read and write permissions on different selectors are not additive (63 ms) [ok]: Test SET with separate read permission (53 ms) [ok]: MULTI propagation of XREADGROUP (104 ms) [ok]: MULTI with SAVE (0 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: ACL GETUSER provides reasonable results (494 ms) [ok]: Test SET with separate write permission (53 ms) [ok]: Test SET with read and write permissions (67 ms) [ok]: Generated sets must be encoded correctly - intset (33 ms) [ok]: SINTER with two sets - intset (7 ms) [ok]: SINTERCARD with two sets - intset (27 ms) [ok]: Test BITFIELD with separate read permission (50 ms) [ok]: SINTERSTORE with two sets - intset (16 ms) [ok]: Big Hash table: SORT BY key (663 ms) [ok]: ACL GETUSER provides correct results (146 ms) [ok]: ACL CAT with illegal arguments (9 ms) [ok]: Test BITFIELD with separate write permission (36 ms) [ok]: ACL CAT without category - list all categories (4 ms) [ok]: Big Hash table: SORT BY key with limit (36 ms) [ok]: SETNX against expired volatile key (2597 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (44 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (2 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (20 ms) [ok]: MULTI with BGREWRITEAOF (217 ms) [ok]: SUNION with two sets - intset (19 ms) [ok]: Test BITFIELD with read and write permissions (36 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (26 ms) [ok]: SUNIONSTORE with two sets - intset (30 ms) [ok]: SINTER against three sets - intset (4 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (17 ms) [ok]: GETDEL propagate as DEL command to replica (57 ms) [ok]: BLMPOP_LEFT: timeout (1096 ms) [ok]: BLMPOP_LEFT: arguments are empty (2 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (53 ms) [ok]: SINTERCARD against three sets - intset (27 ms) [ok]: SINTERSTORE with three sets - intset (13 ms) [ok]: Test ACL GETUSER response information (16 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (24 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (0 ms) [ok]: Test ACL list idempotency (12 ms) [ok]: SUNION with non existing keys - intset (22 ms) [ok]: Test R+W is the same as all permissions (9 ms) [ok]: SDIFF with two sets - intset (5 ms) [ok]: SDIFF with three sets - intset (6 ms) [ok]: Test basic dry run functionality (26 ms) [ok]: SDIFFSTORE with three sets - intset (20 ms) [ok]: Test various commands for command permissions (20 ms) [ok]: GETEX without argument does not propagate to replica (103 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (27 ms) [ok]: MGET (11 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (121 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (1 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (1 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: ACL LOG shows failed command executions at toplevel (39 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (53 ms) [ok]: MULTI with config set appendonly (230 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (33 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1043 ms) [ok]: 5 keys in, 5 keys out (14 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (1 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: ACL LOG is able to test similar events (46 ms) [ok]: ACL LOG is able to log keys access violations and key name (15 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (95 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (22 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (10 ms) [ok]: Test various odd commands for key permissions (180 ms) [ok]: ACL LOG can distinguish the transaction context (1) (36 ms) [ok]: Existence test commands are not marked as access (50 ms) [ok]: ACL LOG can distinguish the transaction context (2) (46 ms) [ok]: ACL can log errors in the context of Lua scripting (15 ms) [ok]: Intersection cardinaltiy commands are access commands (60 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (29 ms) [ok]: ACL LOG can log failed auth attempts (7 ms) [ok]: SETBIT fuzzing (322 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: Test general keyspace commands require some type of permission to execute (60 ms) [ok]: ZDIFF fuzzing - skiplist (4940 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (5 ms) [ok]: ACL LOG entries are limited to a maximum amount (105 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: When default user is off, new connections are not authenticated (13 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: When default user has no command permission, hello command still works for other users (17 ms) [ok]: Cardinality commands require some type of permission to execute (109 ms) [ok]: MULTI with FLUSHALL and AOF (47 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (20 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (16 ms) [ok]: ZMPOP propagate as pop with count command to replica (57 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (10 ms) [ok]: ACL HELP should not have unexpected options (7 ms) [ok]: Delete a user that the client doesn't use (10 ms) [ok]: Test sharded channel permissions (53 ms) [ok]: Delete a user that the client is using (7 ms) [ok]: ACL GENPASS command failed test (10 ms) [ok]: Default user can not be removed (3 ms) [11/92 done]: unit/multi (7 seconds) Testing unit/latency-monitor [ok]: ACL load non-existing configured ACL file (3 ms) [ok]: Test sort with ACL permissions (57 ms) [ok]: ACL-Metrics user AUTH failure (44 ms) [ok]: Test DRYRUN with wrong number of arguments (20 ms) [ok]: ACL-Metrics invalid command accesses (53 ms) [ok]: Check consistency of different data types after a reload (3474 ms) [ok]: ACL-Metrics invalid key accesses (50 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (203 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: XDEL fuzz test (1475 ms) [ok]: Big Hash table: SORT BY hash field (879 ms) [ok]: LATENCY HISTOGRAM with empty histogram (17 ms) [ok]: ACL-Metrics invalid channels accesses (40 ms) [ok]: LATENCY HISTOGRAM all commands (13 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (3 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (0 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (0 ms) [ok]: LATENCY HISTOGRAM sub commands (19 ms) [ok]: SORT regression for issue #19, sorting floats (11 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (26 ms) [ok]: LATENCY HISTOGRAM command (13 ms) [ok]: SORT speed, 100 element list BY key, 100 times (20 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (27 ms) [ok]: Same dataset digest if saving/reloading as AOF? (168 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (22 ms) [ok]: SORT speed, 100 element list directly, 100 times (13 ms) [ok]: SORT speed, 100 element list BY , 100 times (12 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: BZMPOP readraw in RESP3 (205 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (0 ms) [ok]: Test behavior of loading ACLs (7 ms) [ok]: BLMPOP_RIGHT: timeout (1006 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [12/92 done]: unit/sort (9 seconds) Testing integration/block-repl [13/92 done]: unit/acl-v2 (2 seconds) Testing integration/replication [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (158 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (204 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: default: load from include file, can access any channels (26 ms) [ok]: GETRANGE fuzzing (770 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (1 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (1 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (1 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (0 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (29 ms) [ok]: BLMPOP propagate as pop with count command to replica (207 ms) [ok]: LPUSHX, RPUSHX - generic (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (18 ms) [ok]: Alice: can execute all command (16 ms) [ok]: Bob: just execute @set and acl command (17 ms) [ok]: LPUSHX, RPUSHX - quicklist (43 ms) [ok]: LINSERT - quicklist (44 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [14/92 done]: unit/type/string (10 seconds) Testing integration/replication-2 [ok]: ACL load and save (60 ms) [ok]: Slave enters handshake (2 ms) [ok]: LINDEX consistency test - listpack (57 ms) [ok]: Slave enters wait_bgsave (4 ms) [ok]: BZMPOP readraw in RESP2 (205 ms) [ok]: ACL load and save with restricted channels (63 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: LINDEX random access - listpack (45 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (88 ms) [ok]: ZUNIONSTORE result is sorted (127 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (26 ms) [ok]: ZMSCORE - listpack (29 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (43 ms) [ok]: LINDEX consistency test - listpack (110 ms) [ok]: ZSET sorting stresser - listpack (41 ms) [ok]: LINDEX random access - listpack (79 ms) [ok]: Default user has access to all channels irrespective of flag (6 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (30 ms) [ok]: Single channel is valid (14 ms) [ok]: Single channel is not valid with allchannels (13 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (163 ms) [ok]: First server should have role slave after SLAVEOF (130 ms) [ok]: If min-slaves-to-write is honored, write is accepted (23 ms) [ok]: LINDEX consistency test - quicklist (58 ms) [ok]: No write if min-slaves-to-write is < attached slaves (17 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (13 ms) [ok]: LINDEX random access - quicklist (38 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (86 ms) [ok]: Only default user has access to all channels irrespective of flag (14 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (10525 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (6 ms) [ok]: First server should have role slave after SLAVEOF (1015 ms) [ok]: default: load from config file with all channels permissions (33 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2647 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2089 ms) [ok]: Test loading an ACL file with duplicate users (50 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (56 ms) [ok]: Test loading an ACL file with duplicate default user (43 ms) [ok]: Test loading duplicate users in config on startup (27 ms) [ok]: First server should have role slave after REPLICAOF (10 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (631 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: ACL from config file and config rewrite (340 ms) [ok]: APPEND fuzzing (218 ms) [15/92 done]: unit/acl (6 seconds) Testing integration/replication-3 [ok]: LTRIM stress testing - listpack (5372 ms) [ok]: LINDEX consistency test - quicklist (2016 ms) [ok]: FLUSHDB (98 ms) [16/92 done]: unit/type/list-2 (13 seconds) Testing integration/replication-4 [ok]: Perform a final SAVE to leave a clean DB on disk (18 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: Test latency events logging (3416 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: LINDEX random access - quicklist (243 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (916 ms) [ok]: First server should have role slave after SLAVEOF (14 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (192 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (48 ms) [ok]: First server should have role slave after SLAVEOF (123 ms) [ok]: LMOVE left left base case - quicklist (46 ms) [ok]: LMOVE left right base case - quicklist (46 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (276 ms) [ok]: LMOVE right left base case - quicklist (43 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2743 ms) [ok]: min-slaves-to-write is ignored by slaves (15 ms) [ok]: LMOVE right right base case - quicklist (45 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (48 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (43 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (97 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (93 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (89 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (3785 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (45 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (46 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (162 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (47 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (45 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (45 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (47 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (0 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (0 ms) [ok]: LMOVE right right with listpack source and existing target listpack (0 ms) [ok]: RPOPLPUSH against non existing key (1 ms) [ok]: RPOPLPUSH against non list src key (4 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (50 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: XRANGE fuzzing (5300 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (89 ms) [ok]: XREAD streamID edge (blocking) (2 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: XTRIM with MAXLEN option basic test (62 ms) [ok]: XADD with LIMIT consecutive calls (6 ms) [ok]: XTRIM with ~ is limited (7 ms) [ok]: XTRIM without ~ is not limited (7 ms) [ok]: XTRIM without ~ and with LIMIT (7 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: Mass RPOP/LPOP - listpack (194 ms) [ok]: Don't rehash if redis has child process (1913 ms) [ok]: Mass RPOP/LPOP - listpack (86 ms) [ok]: SDIFF fuzzing (6278 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: LMPOP with illegal argument (93 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (6 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (6 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (3 ms) [ok]: SPOP with - intset (2 ms) [ok]: SPOP with - hashtable (3 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (2 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (80 ms) [ok]: Process title set as expected (16 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (21 ms) [ok]: LMPOP single existing list - quicklist (238 ms) [ok]: SRANDMEMBER with - intset (19 ms) [ok]: SRANDMEMBER with - hashtable (28 ms) [ok]: SRANDMEMBER histogram distribution - listpack (65 ms) [17/92 done]: unit/other (14 seconds) Testing integration/replication-psync [ok]: MIGRATE cached connections are released after some time (15008 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2023 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: SRANDMEMBER histogram distribution - intset (59 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (63 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (1 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (60 ms) [ok]: Redis should not propagate the read command on lazy expire (98 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (103 ms) [ok]: MIGRATE is able to migrate a key between two instances (320 ms) [ok]: LMPOP multiple existing lists - quicklist (400 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (663 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (104 ms) [ok]: LMPOP single existing list - listpack (97 ms) [ok]: LMPOP multiple existing lists - listpack (63 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (1713 ms) [18/92 done]: unit/expire (15 seconds) Testing integration/replication-buffer [ok]: Slave should be able to synchronize with the master (140 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (81 ms) [ok]: LMPOP propagate as pop with count command to replica (128 ms) [ok]: LRANGE basics - quicklist (71 ms) [ok]: MIGRATE is able to copy a key between two instances (416 ms) [ok]: LRANGE inverted indexes - quicklist (53 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (46 ms) [ok]: LRANGE out of range negative end index - quicklist (66 ms) [ok]: LRANGE basics - listpack (26 ms) [ok]: LRANGE inverted indexes - listpack (2 ms) [ok]: LRANGE out of range indexes including the full list - listpack (1 ms) [ok]: LRANGE out of range negative end index - listpack (2 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (286 ms) [ok]: LATENCY GRAPH can output the expire event graph (4 ms) [ok]: LATENCY of expire events are correctly collected (3636 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [19/92 done]: unit/latency-monitor (7 seconds) Testing integration/shutdown [ok]: XADD with MINID > lastid can propagate correctly (633 ms) [ok]: MIGRATE propagates TTL correctly (274 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (769 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: LTRIM basics - quicklist (671 ms) [ok]: LTRIM out of range negative end index - quicklist (107 ms) [ok]: LSET - quicklist (45 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (9 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (1 ms) [ok]: LREM remove all the occurrences - quicklist (50 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (1 ms) [ok]: LREM starting from tail with negative count - quicklist (45 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (214 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (48 ms) [ok]: LREM remove all the occurrences - listpack (2 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (4 ms) [ok]: client unblock tests (3 ms) [ok]: List listpack -> quicklist encoding conversion (22 ms) [ok]: List listpack -> quicklist encoding conversion (238 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1025 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: List quicklist -> listpack encoding conversion (233 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (346 ms) [ok]: List encoding conversion when RDB loading (79 ms) [ok]: List invalid list-max-listpack-size config (100 ms) [ok]: List of various encodings (168 ms) [ok]: List of various encodings - sanitize dump (27 ms) [ok]: Test replication with parallel clients writing in different DBs (5113 ms) [ok]: Unblock fairness is kept while pipelining (38 ms) [ok]: Unblock fairness is kept during nested unblock (46 ms) [ok]: Blocking command accounted only once in commandstats (46 ms) [ok]: Blocking command accounted only once in commandstats after timeout (33 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (104 ms) [20/92 done]: unit/type/list (19 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (10 ms) [ok]: XADD with ~ MINID can propagate correctly (663 ms) [ok]: All replicas share one global replication buffer (206 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1008 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Replication buffer will become smaller when no replica uses (33 ms) [ok]: Short read: Server should start if load-truncated is yes (5 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (10 ms) [ok]: Append a new command after loading an incomplete AOF (7 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (42 ms) [ok]: First server should have role slave after SLAVEOF (106 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (16 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (13 ms) [ok]: With min-slaves-to-write function without no-write flag (6 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (17 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (1 ms) [ok]: SCAN regression test for issue #4906 (17446 ms) [21/92 done]: unit/scan (20 seconds) Testing integration/aof-race [ok]: XTRIM with ~ MAXLEN can propagate correctly (171 ms) [ok]: Bad format: Server should have logged an error (6 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8583 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: MASTER and SLAVE consistency with expire (6392 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: Unfinished MULTI: Server should have logged an error (10 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (153 ms) [ok]: Short read: Server should have logged an error (2 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (6450 ms) [ok]: Short read: Utility should confirm the AOF is not valid (10 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (10 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1004 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: ZSCORE - skiplist (18 ms) [ok]: ZMSCORE - skiplist (17 ms) [22/92 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [ok]: Fixed AOF: Server should have been started (4 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [23/92 done]: integration/replication-2 (10 seconds) Testing integration/rdb [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Detect write load to master (4023 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (57 ms) [ok]: Multi Part AOF can't load data when some file missing (181 ms) [ok]: Empty stream can be rewrite into AOF correctly (107 ms) [ok]: test old version rdb file (26 ms) [ok]: AOF+SPOP: Server should have been started (2 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (145 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (126 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (460 ms) [ok]: ZSET sorting stresser - skiplist (45 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (170 ms) [ok]: AOF+SPOP: Server should have been started (10 ms) [ok]: AOF+SPOP: Set should have 1 member (6 ms) [ok]: XGROUP HELP should not have unexpected options (6 ms) [ok]: XINFO HELP should not have unexpected options (7 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (193 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (4012 ms) [24/92 done]: unit/type/stream (21 seconds) Testing integration/corrupt-dump [ok]: Set instance A as slave of B (127 ms) [ok]: INCRBYFLOAT replication, should not remove expire (26 ms) [ok]: GETSET replication (46 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (207 ms) [ok]: AOF+EXPIRE: Server should have been started (6 ms) [ok]: AOF+EXPIRE: List should be empty (14 ms) [ok]: RDB encoding loading test (323 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (43 ms) [ok]: Slave should be able to synchronize with the master (226 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (210 ms) [ok]: corrupt payload: #7445 - with sanitize (297 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (7 ms) [ok]: Server started empty with non-existing RDB file (6 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (190 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (222 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (167 ms) [ok]: corrupt payload: invalid zlbytes header (290 ms) [ok]: Server started empty with empty RDB file (6 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (163 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (149 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2713 ms) [ok]: corrupt payload: valid zipped hash header, dup records (310 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1509 ms) [ok]: BRPOPLPUSH replication, list exists (1046 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (27 ms) [ok]: Multi Part AOF can start when no aof and no manifest (223 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (126 ms) [ok]: Test RDB stream encoding (233 ms) [ok]: Test RDB stream encoding - sanitize dump (9 ms) [ok]: corrupt payload: quicklist big ziplist prev len (310 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (176 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (15 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (309 ms) [ok]: Server should not start if RDB file can't be open (6 ms) [ok]: corrupt payload: quicklist small ziplist prev len (276 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (16230 ms) [ok]: Server should not start if RDB is corrupted (8 ms) [ok]: First server should have role slave after SLAVEOF (121 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (277 ms) [ok]: corrupt payload: quicklist ziplist wrong count (314 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (578 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (291 ms) [ok]: Detect write load to master (2016 ms) [ok]: BLMOVE (left, left) replication, list exists (1053 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (27 ms) [ok]: corrupt payload: #3080 - quicklist (287 ms) [ok]: Replication of an expired key does not delete the expired key (593 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (307 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2502 ms) [ok]: corrupt payload: quicklist with empty ziplist (323 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (212 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (456 ms) [ok]: Replication backlog size can outgrow the backlog limit config (3490 ms) [ok]: First server should have role slave after SLAVEOF (10 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1022 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (307 ms) [ok]: BZPOPMIN with same key multiple times should work (37 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (30 ms) [ok]: BZPOPMIN with variadic ZADD (16 ms) [ok]: BLMOVE (left, right) replication, list exists (1020 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (437 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (20 ms) [ok]: Test FLUSHALL aborts bgsave (1592 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (226 ms) [ok]: corrupt payload: #3080 - ziplist (456 ms) [ok]: bgsave resets the change counter (120 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (264 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (340 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (220 ms) [ok]: SRANDMEMBER with a dict containing long chain (9392 ms) [ok]: SMOVE basics - from regular set to intset (9 ms) [ok]: SMOVE basics - from intset to regular set (2 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (7 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1026 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (37 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (420 ms) [ok]: BZMPOP_MIN with variadic ZADD (33 ms) [ok]: BLMOVE (right, left) replication, list exists (1044 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (34 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (170 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (403 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (223 ms) [ok]: Slave is able to evict keys created in writable slaves (6032 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (951 ms) [ok]: Writable replica doesn't return expired keys (54 ms) [ok]: corrupt payload: listpack invalid size header (413 ms) [ok]: PFCOUNT updates cache on readonly replica (47 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (46 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1034 ms) [ok]: BZPOP/BZMPOP against wrong type (40 ms) [ok]: BZMPOP with illegal argument (57 ms) [ok]: corrupt payload: listpack too long entry len (356 ms) [25/92 done]: integration/replication-3 (14 seconds) Testing integration/corrupt-dump-fuzzer [ok]: BLMOVE (right, right) replication, list exists (1029 ms) [ok]: BZMPOP with multiple blocked clients (56 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (546 ms) [ok]: BLPOP followed by role change, issue #2473 (237 ms) [ok]: corrupt payload: listpack very long entry len (267 ms) [ok]: BZMPOP propagate as pop with count command to replica (283 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (53 ms) [ok]: MIGRATE can correctly transfer large values (9897 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (330 ms) [ok]: client freed during loading (2185 ms) [ok]: corrupt payload: listpack too long entry prev len (285 ms) [ok]: Shutting down master waits for replica timeout (3700 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (355 ms) [ok]: corrupt payload: stream with duplicate consumers (295 ms) [ok]: MIGRATE can correctly transfer hashes (410 ms) [ok]: Second server should have role master at first (3 ms) [ok]: SLAVEOF should start with link status "down" (7 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Sync should have transferred keys from master (3 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (5 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: intsets implementation stress testing (2266 ms) [26/92 done]: unit/type/set (28 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: FLUSHDB / FLUSHALL should replicate (101 ms) [ok]: ROLE in master reports master with a slave (3 ms) [ok]: ROLE in slave reports slave in connected state (3 ms) [ok]: corrupt payload: hash ziplist with duplicate records (276 ms) [ok]: RDB load zipmap hash: converts to listpack (27 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (7990 ms) [ok]: AOF fsync always barrier issue (5984 ms) [ok]: corrupt payload: hash listpack with duplicate records (274 ms) [ok]: Test RDB load info (766 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (20 ms) [ok]: AOF enable will create manifest file (600 ms) [ok]: MIGRATE timeout actually works (800 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (274 ms) [ok]: GETEX should not append to AOF (16 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (12 ms) [ok]: corrupt payload: hash ziplist uneven record count (312 ms) [27/92 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: MIGRATE can migrate multiple keys at once (427 ms) [ok]: MIGRATE with multiple keys must have empty key arg (6 ms) [ok]: Unknown command: Server should have logged an error (6 ms) [ok]: Shutting down master waits for replica then fails (1403 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (14 ms) [ok]: corrupt payload: hash duplicate records (304 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (195 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (433 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (17 ms) [ok]: corrupt payload: hash empty zipmap (389 ms) [28/92 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (26 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (5399 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (337 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1368 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (294 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: Shutting down master waits for replica then aborted (837 ms) [29/92 done]: integration/shutdown (13 seconds) Testing integration/logging [ok]: ZSET skiplist order consistency when elements are moved (2592 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (11 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (1 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: ZRANDMEMBER - listpack (15 ms) [ok]: ZRANDMEMBER - skiplist (15 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6307 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (352 ms) [ok]: Crash report generated on SIGABRT (10 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (146 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (299 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (29 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (540 ms) [30/92 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: AOF rewrite doesn't open new aof when AOF turn off (492 ms) [ok]: Crash report generated on DEBUG SEGFAULT (21 ms) [31/92 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (9 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (306 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (427 ms) [ok]: ZRANDMEMBER with - skiplist (678 ms) [ok]: Test child sending info (1969 ms) [ok]: AOF enable/disable auto gc (302 ms) [ok]: Slave should be able to synchronize with the master (123 ms) [32/92 done]: unit/dump (30 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (333 ms) [ok]: AOF can produce consecutive sequence number after reload (171 ms) [ok]: Generate timestamp annotations in AOF (447 ms) [ok]: script won't load anymore if it's in rdb (6 ms) [ok]: Successfully load AOF which has timestamp annotations inside (19 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (392 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (9 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (3 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (474 ms) [ok]: corrupt payload: fuzzer findings - hash crash (305 ms) [ok]: ZRANDMEMBER with - listpack (1084 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (11 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: failed bgsave prevents writes (483 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (321 ms) [33/92 done]: unit/type/zset (32 seconds) Testing integration/psync2-master-restart [34/92 done]: integration/rdb (12 seconds) Testing integration/failover [ok]: AOF will trigger limit when AOFRW fails many times (663 ms) [ok]: PSYNC2 #3899 regression: setup (1056 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (273 ms) [ok]: Truncate AOF to specific timestamp (823 ms) [ok]: PSYNC2 pingoff: setup (1036 ms) [ok]: PSYNC2 pingoff: write and wait replication (27 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (4 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (267 ms) [ok]: failover command fails without connected replica (6 ms) [ok]: corrupt payload: fuzzer findings - empty intset (266 ms) [ok]: setup replication for following tests (124 ms) [ok]: failover command fails with invalid host (1 ms) [ok]: failover command fails with invalid port (2 ms) [ok]: failover command fails with just force and timeout (2 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (5 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (283 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (313 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (3 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (282 ms) [ok]: Detect write load to master (3025 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (1634 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (329 ms) [ok]: EVAL can process writes from AOF in read-only replicas (256 ms) [ok]: Test redis-check-aof for old style resp AOF (15 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (10 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (11 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (10 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (16 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (10 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (16 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (11 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (301 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1257 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (2 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (16 ms) [ok]: failover command to specific replica works (1706 ms) [35/92 done]: integration/aof (15 seconds) Testing integration/redis-cli [ok]: corrupt payload: fuzzer findings - stream bad lp_count (306 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (5 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (200 ms) [ok]: Interactive CLI: INFO response should be printed raw (71 ms) [ok]: Interactive CLI: Status reply (153 ms) [ok]: Interactive CLI: Integer reply (121 ms) [ok]: Interactive CLI: Bulk reply (65 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (363 ms) [ok]: Interactive CLI: Multi-bulk reply (63 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2955 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (4360 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (234 ms) [ok]: failover command to any replica works (946 ms) [ok]: PSYNC2: cluster is consistent after failover (17 ms) [36/92 done]: integration/aof-multi-part (15 seconds) Testing integration/redis-benchmark [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (226 ms) [ok]: Interactive CLI: Parsing quotes (443 ms) [ok]: benchmark: set,get (19 ms) [ok]: corrupt payload: OOM in rdbGenericLoadStringObject (280 ms) [ok]: benchmark: connecting using URI set,get (36 ms) [ok]: failover to a replica with force works (501 ms) [ok]: benchmark: connecting using URI with authentication set,get (34 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (23 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1262 ms) [ok]: Interactive CLI: Subscribed mode (614 ms) [ok]: corrupt payload: fuzzer findings - OOM in dictExpand (423 ms) [ok]: benchmark: full test suite (400 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (4 ms) [ok]: failover with timeout aborts if replica never catches up (599 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1337 ms) [37/92 done]: integration/replication-buffer (20 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (300 ms) [ok]: failovers can be aborted (97 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (456 ms) [ok]: Non-interactive TTY CLI: Status reply (10 ms) [ok]: Non-interactive TTY CLI: Integer reply (21 ms) [ok]: Non-interactive TTY CLI: Bulk reply (24 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (29 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (235 ms) [ok]: benchmark: multi-thread set,get (528 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (52 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (39 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9922 ms) [ok]: Test replication with blocking lists and sorted sets operations (25027 ms) [ok]: failover aborts if target rejects sync request (429 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (223 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (299 ms) [ok]: Non-interactive non-TTY CLI: Status reply (20 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (19 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (21 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (33 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (40 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (25 ms) [38/92 done]: integration/block-repl (27 seconds) Testing unit/pubsub [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (40 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5023 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (21 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (55 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (295 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (52 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (9 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (7 ms) [ok]: Pub/Sub PING on RESP2 (15 ms) [ok]: Pub/Sub PING on RESP3 (16 ms) [ok]: PUBLISH/SUBSCRIBE basics (5 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (44 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (2 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (3 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: PubSub messages with CLIENT REPLY OFF (89 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (2 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (49 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (288 ms) [ok]: Keyspace notifications: we receive keyevent notifications (53 ms) [ok]: benchmark: pipelined full set,get (857 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: Keyspace notifications: we are able to mask events (3 ms) [ok]: Keyspace notifications: general events test (15 ms) [ok]: Keyspace notifications: list events test (33 ms) [ok]: Keyspace notifications: set events test (30 ms) [ok]: Keyspace notifications: zset events test (33 ms) [ok]: benchmark: arbitrary command (136 ms) [ok]: Keyspace notifications: hash events test (27 ms) [ok]: Keyspace notifications: stream events test (43 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: benchmark: keyspace length (93 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (246 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (33 ms) [ok]: Keyspace notifications: expired events (triggered expire) (133 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (6 ms) [39/92 done]: integration/redis-benchmark (3 seconds) Testing unit/pubsubshard [ok]: Keyspace notifications: expired events (background expire) (220 ms) [ok]: Keyspace notifications: evicted events (33 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (332 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (29 ms) [40/92 done]: integration/failover (6 seconds) Testing unit/slowlog [ok]: Keyspace notifications: new key test (26 ms) [ok]: publish to self inside multi (29 ms) [ok]: publish to self inside script (13 ms) [ok]: unsubscribe inside multi, and publish to self (33 ms) [ok]: Make the old master a replica of the new one and check conditions (1080 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (44 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (13 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (4 ms) [ok]: SSUBSCRIBE to one channel more than once (2 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (2 ms) [ok]: PUBSUB command basics (3 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (4 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (5 ms) [41/92 done]: unit/pubsub (1 seconds) Testing unit/scripting [ok]: SLOWLOG - check that it starts with an empty log (2 ms) [ok]: PubSubShard with CLIENT REPLY OFF (91 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (311 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (12 ms) [ok]: EVAL - Return _G (13 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (220 ms) [ok]: EVAL - Return table with a metatable that raise error (13 ms) [ok]: EVAL - Return table with a metatable that call redis (20 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (2523 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (13 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (9 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (12 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (13 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (10 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (10 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (13 ms) [ok]: EVAL - is Lua able to call Redis API? (17 ms) [ok]: EVAL - Redis integer -> Lua type conversion (20 ms) [ok]: corrupt payload: fuzzer findings - huge string (311 ms) [ok]: EVAL - Lua number -> Redis integer conversion (17 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (19 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (33 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (13 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (20 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (20 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (30 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (27 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: EVAL - Scripts do not block on blpop command (24 ms) [ok]: EVAL - Scripts do not block on brpop command (26 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (23 ms) [ok]: EVAL - Scripts do not block on blmove command (20 ms) [ok]: SLOWLOG - max entries is correctly handled (442 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (16 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (278 ms) [ok]: setup replication for following tests (120 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (26 ms) [ok]: EVAL - Scripts do not block on wait (8 ms) [ok]: publish message to master and receive on replica (24 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (36 ms) [ok]: EVAL - Scripts can run non-deterministic commands (10 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (7 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (11 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (9 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (13 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (7 ms) [ok]: EVAL - JSON string decoding (7 ms) [ok]: EVAL - JSON smoke test (9 ms) [ok]: EVAL - cmsgpack can pack double? (6 ms) [ok]: EVAL - cmsgpack can pack negative int64? (7 ms) [ok]: SLOWLOG - logged entry sanity check (203 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (3 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (0 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (221 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (7 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (265 ms) [ok]: SLOWLOG - can clean older entries (205 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (468 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (8 ms) [ok]: EVAL - Numerical sanity check from bitop (6 ms) [ok]: EVAL - Verify minimal bitop functionality (7 ms) [ok]: EVAL - Able to parse trailing comments (8 ms) [ok]: EVAL_RO - Successful case (12 ms) [ok]: EVAL_RO - Cannot run write commands (11 ms) [ok]: redis.sha1hex() implementation (14 ms) [ok]: Globals protection reading an undeclared global variable (7 ms) [ok]: Globals protection setting an undeclared global* (7 ms) [ok]: lua bit.tohex bug (10 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (238 ms) [ok]: Test an example script DECR_IF_GT (40 ms) [42/92 done]: unit/pubsubshard (2 seconds) Testing unit/functions [ok]: SLOWLOG - can be disabled (403 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (2 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (292 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: FUNCTION - Basic usage (6 ms) [ok]: FUNCTION - Load with unknown argument (3 ms) [ok]: FUNCTION - Create an already exiting library raise error (3 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (4 ms) [ok]: FUNCTION - Create a library with wrong name format (9 ms) [ok]: FUNCTION - Create library with unexisting engine (3 ms) [ok]: FUNCTION - Test uncompiled script (3 ms) [ok]: FUNCTION - test replace argument (3 ms) [ok]: FUNCTION - test function case insensitive (6 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (6 ms) [ok]: FUNCTION - test function delete (7 ms) [ok]: FUNCTION - test fcall bad arguments (6 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (3 ms) [ok]: FUNCTION - test fcall negative number of keys (3 ms) [ok]: FUNCTION - test delete on not exiting library (3 ms) [ok]: FUNCTION - test function kill when function is not running (3 ms) [ok]: FUNCTION - test wrong subcommand (3 ms) [ok]: FUNCTION - test loading from rdb (23 ms) [ok]: FUNCTION - test debug reload different options (37 ms) [43/92 done]: unit/slowlog (2 seconds) Testing unit/maxmemory [ok]: FUNCTION - test debug reload with nosave and noflush (56 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (16 ms) [ok]: dismiss all data types memory (3673 ms) [ok]: FUNCTION - test function dump and restore (26 ms) [ok]: FUNCTION - test function dump and restore with flush argument (17 ms) [ok]: PSYNC2: generate load while killing replication links (5003 ms) [ok]: FUNCTION - test function dump and restore with append argument (33 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (308 ms) [ok]: PSYNC2: cluster is consistent after load (x = 13944) (23 ms) [ok]: FUNCTION - test function dump and restore with replace argument (30 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (13 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (4 ms) [ok]: FUNCTION - test fcall_ro with write command (6 ms) [ok]: FUNCTION - test fcall_ro with read only commands (10 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (23 ms) [ok]: FUNCTION - test keys and argv (10 ms) [ok]: FUNCTION - test command get keys on fcall (4 ms) [ok]: FUNCTION - test command get keys on fcall_ro (3 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: EVAL does not leak in the Lua stack (733 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (7 ms) [ok]: Number conversion precision test (issue #1118) (6 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (6 ms) [ok]: String containing number precision test (regression of issue #1118) (6 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (6 ms) [ok]: Scripts can handle commands with incorrect arity (13 ms) [ok]: PSYNC2 #3899 regression: kill first replica (14 ms) [ok]: Correct handling of reused argv (issue #1939) (7 ms) [ok]: Functions in the Redis namespace are able to report errors (6 ms) [ok]: CLUSTER RESET can not be invoke from within a script (11 ms) [ok]: Script with RESP3 map (43 ms) [ok]: corrupt payload: fuzzer findings - empty zset (293 ms) [ok]: Replication: commands with many arguments (issue #1221) (16390 ms) [ok]: Dumping an RDB - functions only: no (3424 ms) [ok]: Script return recursive object (149 ms) [ok]: Script check unpack with massive arguments (44 ms) [ok]: Script read key with expiration set (16 ms) [ok]: spopwithcount rewrite srem command (107 ms) [ok]: FUNCTION - test function kill (439 ms) [ok]: Script del key with expiration set (20 ms) [ok]: Script ACL check (50 ms) [ok]: Binary code loading failed (5 ms) [ok]: Try trick global protection 1 (6 ms) [ok]: Try trick global protection 2 (7 ms) [ok]: Try trick global protection 3 (6 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (313 ms) [ok]: Try trick global protection 4 (11 ms) [ok]: Try trick readonly table on redis table (6 ms) [ok]: Try trick readonly table on json table (11 ms) [ok]: Try trick readonly table on cmsgpack table (6 ms) [ok]: Try trick readonly table on bit table (11 ms) [ok]: Test loadfile are not available (5 ms) [ok]: Test dofile are not available (7 ms) [ok]: Test print are not available (7 ms) [ok]: PSYNC2 #3899 regression: kill first replica (12 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: dismiss client output buffer (814 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (712 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (309 ms) [ok]: dismiss client query buffer (183 ms) [ok]: FUNCTION - test script kill not working on function (440 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (3 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (385 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7920 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (317 ms) [ok]: FUNCTION - test function kill not working on eval (425 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (428 ms) [ok]: FUNCTION - test function flush (62 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (948 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (69 ms) [ok]: FUNCTION - test function wrong argument (10 ms) [ok]: Timedout script does not cause a false dead client (60 ms) [ok]: Timedout script link is still usable after Lua returns (66 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (403 ms) [ok]: ziplist implementation: value encoding and backlink (13936 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (304 ms) [ok]: Timedout scripts and unblocked command (379 ms) [ok]: Slave should be able to synchronize with the master (137 ms) [ok]: Connect a replica to the master instance (123 ms) [ok]: FUNCTION - creation is replicated to replica (7 ms) [ok]: FUNCTION - call on replica (3 ms) [ok]: FUNCTION - restore is replicated to replica (24 ms) [ok]: FUNCTION - delete is replicated to replica (4 ms) [ok]: FUNCTION - flush is replicated to replica (16 ms) [ok]: First server should have role slave after SLAVEOF (120 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (11 ms) [ok]: Data divergence can happen under default conditions (50 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (256 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (2 ms) [ok]: Disconnecting the replica from master instance (141 ms) [ok]: Data divergence is allowed on writable replicas (33 ms) [ok]: FUNCTION - test replication to replica on rdb phase (2 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (7 ms) [ok]: FUNCTION - create on read only replica (8 ms) [ok]: FUNCTION - delete on read only replica (4 ms) [ok]: FUNCTION - function effect is replicated to replica (14 ms) [ok]: FUNCTION - modify key space of read only replica (4 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (1128 ms) [ok]: Dumping an RDB - functions only: yes (1910 ms) [44/92 done]: integration/replication-4 (30 seconds) Testing unit/introspection [ok]: test various edge cases of repl topology changes with missing pings at the end (3340 ms) [ok]: dismiss replication backlog (1550 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (326 ms) [ok]: Before the replica connects we issue two EVAL commands (18 ms) [45/92 done]: integration/dismiss-mem (7 seconds) Testing unit/introspection-2 [ok]: PING (4 ms) [ok]: CLIENT LIST (3 ms) [ok]: CLIENT LIST with IDs (6 ms) [ok]: CLIENT INFO (3 ms) [ok]: CLIENT KILL with illegal arguments (34 ms) [ok]: Connect a replica to the master instance (113 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (33 ms) [ok]: Replication of script multiple pushes to list with BLPOP (33 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (413 ms) [ok]: Lua scripts using SELECT are replicated correctly (26 ms) [ok]: CLIENT KILL close the client connection during bgsave (91 ms) [ok]: The microsecond part of the TIME command will not overflow (10 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (327 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (54 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (51 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (51 ms) [ok]: MONITOR can log executed commands (10 ms) [ok]: MONITOR can log commands issued by the scripting engine (7 ms) [ok]: MONITOR can log commands issued by functions (10 ms) [ok]: MONITOR supports redacting command arguments (24 ms) [ok]: MONITOR correctly handles multi-exec cases (28 ms) [ok]: MONITOR log blocked command only once (33 ms) [ok]: Scan mode (739 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (2 ms) [ok]: CLIENT SETNAME does not accept spaces (1 ms) [ok]: CLIENT SETNAME can assign a name to this connection (3 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (3 ms) [ok]: After CLIENT SETNAME, connection can still be closed (10 ms) [ok]: CLIENT SETINFO can set a library name to this connection (3 ms) [ok]: CLIENT SETINFO invalid args (9 ms) [ok]: RESET does NOT clean library name (4 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (323 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (559 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (493 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (323 ms) [ok]: LIBRARIES - test shared function can access default globals (6 ms) [ok]: LIBRARIES - usage and code sharing (23 ms) [ok]: LIBRARIES - test registration failure revert the entire load (13 ms) [ok]: LIBRARIES - test registration function name collision (10 ms) [ok]: LIBRARIES - test registration function name collision on same library (6 ms) [ok]: LIBRARIES - test registration with no argument (3 ms) [ok]: LIBRARIES - test registration with only name (6 ms) [ok]: LIBRARIES - test registration with to many arguments (4 ms) [ok]: LIBRARIES - test registration with no string name (6 ms) [ok]: LIBRARIES - test registration with wrong name format (6 ms) [ok]: LIBRARIES - test registration with empty name (6 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redis.call from function load (6 ms) [ok]: LIBRARIES - redis.setresp from function load (5 ms) [ok]: LIBRARIES - redis.set_repl from function load (4 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (4 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (6 ms) [ok]: LIBRARIES - malicious access test (20 ms) [ok]: LIBRARIES - delete removed all functions on library (10 ms) [ok]: LIBRARIES - register function inside a function (11 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (407 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (758 ms) [ok]: Connect a replica to the master instance (117 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (4 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (2 ms) [ok]: Redis.set_repl() don't accept invalid values (13 ms) [ok]: Test selective replication of certain Redis commands from Lua (33 ms) [ok]: PRNG is seeded randomly for command replication (16 ms) [ok]: Using side effects is not a problem with command replication (17 ms) [ok]: LIBRARIES - load timeout (507 ms) [ok]: LIBRARIES - verify global protection on the load run (1 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (5996 ms) [ok]: PSYNC2: cluster is consistent after failover (26 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (410 ms) [46/92 done]: integration/corrupt-dump (23 seconds) Testing unit/limits [ok]: Without maxmemory small integers are shared (11 ms) [ok]: CONFIG save params special case handled properly (1252 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (23 ms) [ok]: With maxmemory and LRU policy integers are not shared (49 ms) [ok]: FUNCTION - wrong flags type named arguments (4 ms) [ok]: FUNCTION - wrong flag type (3 ms) [ok]: FUNCTION - unknown flag (3 ms) [ok]: FUNCTION - write script on fcall_ro (7 ms) [ok]: FUNCTION - write script with no-writes flag (7 ms) [ok]: FUNCTION - deny oom (13 ms) [ok]: FUNCTION - deny oom on no-writes function (17 ms) [ok]: FUNCTION - allow stale (26 ms) [ok]: FUNCTION - redis version api (13 ms) [ok]: FUNCTION - function stats (13 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (14 ms) [ok]: FUNCTION - function stats delete library (5 ms) [47/92 done]: integration/psync2-master-restart (13 seconds) Testing unit/obuf-limits [ok]: FUNCTION - test function stats on loading failure (11 ms) [ok]: FUNCTION - function stats cleaned after flush (7 ms) [ok]: FUNCTION - function test empty engine (6 ms) [ok]: FUNCTION - function test unknown metadata value (4 ms) [ok]: FUNCTION - function test no name (3 ms) [ok]: FUNCTION - function test multiple names (4 ms) [ok]: FUNCTION - function test name with quotes (3 ms) [ok]: FUNCTION - trick global protection 1 (10 ms) [ok]: FUNCTION - test getmetatable on script load (6 ms) [ok]: CONFIG sanity (439 ms) [48/92 done]: unit/functions (5 seconds) Testing unit/bitops [ok]: CONFIG SET client-output-buffer-limit (18 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (16203 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (6 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: BITCOUNT returns 0 against non existing key (15 ms) [ok]: Script block the time during execution (17 ms) [ok]: Script delete the expired key (5 ms) [ok]: BITCOUNT returns 0 with out of range indexes (17 ms) [ok]: TIME command using cached time (12 ms) [ok]: Detect write load to master (3033 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (17 ms) [ok]: BITCOUNT against test vector #1 (16 ms) [ok]: BITCOUNT against test vector #2 (20 ms) [ok]: BITCOUNT against test vector #3 (13 ms) [ok]: BITCOUNT against test vector #4 (16 ms) [ok]: Script block the time in some expiration related commands (88 ms) [ok]: BITCOUNT against test vector #5 (16 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: Connecting as a replica (2204 ms) [ok]: Script - disallow write on OOM (16 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (6 ms) [ok]: EVAL - Return _G (10 ms) [ok]: EVAL - Return table with a metatable that raise error (10 ms) [ok]: EVAL - Return table with a metatable that call redis (7 ms) [ok]: Check if maxclients works refusing connections (1008 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (4 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (5 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (4 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (3 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (7 ms) [ok]: EVAL - is Lua able to call Redis API? (13 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (7 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (4 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (6 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (3 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (3 ms) [ok]: EVAL - Redis integer -> Lua type conversion (6 ms) [ok]: EVAL - Lua number -> Redis integer conversion (3 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (9 ms) [49/92 done]: unit/limits (2 seconds) Testing unit/bitfield [ok]: EVAL - Redis multi bulk -> Lua type conversion (27 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (6 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (10 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (6 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (16 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (20 ms) [ok]: EVAL - Scripts do not block on blpop command (13 ms) [ok]: CONFIG REWRITE sanity (956 ms) [ok]: EVAL - Scripts do not block on brpop command (13 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (13 ms) [ok]: EVAL - Scripts do not block on blmove command (13 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (16 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (14 ms) [ok]: EVAL - Scripts do not block on wait (6 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3027 ms) [ok]: BITFIELD signed SET and GET basics (17 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (34 ms) [ok]: EVAL - Scripts can run non-deterministic commands (5 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (4 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (6 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (4 ms) [ok]: BITFIELD unsigned SET and GET basics (21 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (10 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (6 ms) [ok]: BITFIELD signed SET and GET together (19 ms) [ok]: EVAL - JSON string decoding (7 ms) [ok]: EVAL - JSON smoke test (4 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (7 ms) [ok]: BITFIELD with only key as argument (6 ms) [ok]: EVAL - cmsgpack can pack double? (6 ms) [ok]: EVAL - cmsgpack can pack negative int64? (3 ms) [ok]: BITFIELD # form (17 ms) [ok]: BITFIELD basic INCRBY form (16 ms) [ok]: BITFIELD chaining of multiple commands (9 ms) [ok]: BITFIELD unsigned overflow wrap (20 ms) [ok]: BITFIELD unsigned overflow sat (23 ms) [ok]: BITFIELD signed overflow wrap (10 ms) [ok]: BITFIELD signed overflow sat (1 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (495 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (7 ms) [ok]: EVAL - Numerical sanity check from bitop (5 ms) [ok]: EVAL - Verify minimal bitop functionality (8 ms) [ok]: EVAL - Able to parse trailing comments (4 ms) [ok]: EVAL_RO - Successful case (9 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10030 ms) [50/92 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/geo [ok]: EVAL_RO - Cannot run write commands (10 ms) [ok]: Piping raw protocol (1235 ms) [ok]: Options -X with illegal argument (22 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (53 ms) [ok]: DUMP RESTORE with -x option (54 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (3030 ms) [ok]: DUMP RESTORE with -X option (91 ms) [ok]: BITCOUNT fuzzing without start/end (1574 ms) [ok]: GEO with wrong type src key (46 ms) [ok]: GEO with non existing src key (33 ms) [ok]: GEO BYLONLAT with empty search (21 ms) [51/92 done]: integration/redis-cli (13 seconds) Testing unit/memefficiency [ok]: GEO BYMEMBER with non existing member (19 ms) [ok]: GEOADD create (3 ms) [ok]: GEOADD update (3 ms) [ok]: GEOADD update with CH option (7 ms) [ok]: GEOADD update with NX option (7 ms) [ok]: GEOADD update with XX option (7 ms) [ok]: GEOADD update with CH NX option (4 ms) [ok]: GEOADD update with CH XX option (4 ms) [ok]: GEOADD update with XX NX option will return syntax error (3 ms) [ok]: GEOADD update with invalid option (4 ms) [ok]: GEOADD invalid coordinates (3 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (3 ms) [ok]: GEORADIUS simple (sorted) (4 ms) [ok]: GEORADIUS_RO simple (sorted) (3 ms) [ok]: GEOSEARCH simple (sorted) (5 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (5 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (3 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (4 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (3 ms) [ok]: GEOSEARCH with STOREDIST option (4 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (1134 ms) [ok]: GEORADIUS withdist (sorted) (3 ms) [ok]: GEOSEARCH withdist (sorted) (2 ms) [ok]: GEORADIUS with COUNT (4 ms) [ok]: GEORADIUS with multiple WITH* tokens (7 ms) [ok]: CONFIG SET with multiple args (21 ms) [ok]: GEORADIUS with ANY not sorted by default (4 ms) [ok]: GEORADIUS with ANY sorted by ASC (6 ms) [ok]: GEORADIUS with ANY but no COUNT (3 ms) [ok]: GEORADIUS with COUNT but missing integer argument (4 ms) [ok]: GEORADIUS with COUNT DESC (3 ms) [ok]: GEORADIUS HUGE, issue #2767 (7 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (7 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (3 ms) [ok]: CONFIG SET rollback on set error (34 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (33 ms) [ok]: SCRIPTING FLUSH ASYNC (453 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (10 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (3 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (6 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (6 ms) [ok]: GEOSEARCH vs GEORADIUS (17 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (10 ms) [ok]: CONFIG SET rollback on apply error (60 ms) [ok]: CONFIG SET duplicate configs (3 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: SORT BY output gets ordered for scripting (10 ms) [ok]: CONFIG GET hidden configs (6 ms) [ok]: CONFIG GET multiple args (3 ms) [ok]: SORT BY with GET gets ordered for scripting (10 ms) [ok]: GEOSEARCH non square, long and narrow (23 ms) [ok]: redis.sha1hex() implementation (7 ms) [ok]: Globals protection reading an undeclared global variable (3 ms) [ok]: GEOSEARCH corner point test (10 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (4 ms) [ok]: Globals protection setting an undeclared global* (7 ms) [ok]: lua bit.tohex bug (6 ms) [ok]: GEOHASH is able to return geohash strings (10 ms) [ok]: GEOHASH with only key as argument (10 ms) [ok]: Test an example script DECR_IF_GT (23 ms) [ok]: GEOPOS simple (15 ms) [ok]: random numbers are random now (6 ms) [ok]: Scripting engine PRNG can be seeded correctly (10 ms) [ok]: GEOPOS missing element (11 ms) [ok]: GEOPOS with only key as argument (10 ms) [ok]: GEODIST simple & unit (14 ms) [ok]: GEODIST missing elements (13 ms) [ok]: GEORADIUS STORE option: syntax error (7 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (3 ms) [ok]: GEORANGE STORE option: incompatible options (17 ms) [ok]: BITCOUNT fuzzing with start/end (466 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: GEORANGE STORE option: plain usage (16 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (1 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (1 ms) [ok]: BITOP NOT (known string) (5 ms) [ok]: redis-server command line arguments - error cases (155 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (24 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (10 ms) [ok]: GEORANGE STOREDIST option: plain usage (13 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (7 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (30 ms) [ok]: Memory efficiency with values in range 32 (303 ms) [ok]: GEOSEARCH the box spans -180° or 180° (16 ms) [ok]: GEOSEARCH with small distance (14 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (291 ms) [ok]: BITOP and fuzzing (341 ms) [ok]: EVAL does not leak in the Lua stack (539 ms) [52/92 done]: integration/psync2-pingoff (18 seconds) Testing unit/hyperloglog [ok]: Memory efficiency with values in range 64 (465 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (261 ms) [ok]: BITOP or fuzzing (218 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (174 ms) [ok]: MGET: mget shouldn't be propagated in Lua (63 ms) [ok]: BITOP xor fuzzing (228 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (106 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (263 ms) [ok]: BITOP NOT fuzzing (40 ms) [ok]: BITOP with integer encoded source objects (0 ms) [ok]: BITOP with non string source key (1 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (4 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (0 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: ziplist implementation: encoding stress testing (6384 ms) [ok]: Memory efficiency with values in range 128 (438 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (182 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (249 ms) [53/92 done]: unit/type/list-3 (48 seconds) Testing unit/lazyfree [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (426 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (7 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (3 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (6 ms) [ok]: Scripts can handle commands with incorrect arity (13 ms) [ok]: Correct handling of reused argv (issue #1939) (6 ms) [ok]: HyperLogLog self test passes (567 ms) [ok]: Functions in the Redis namespace are able to report errors (4 ms) [ok]: PFADD without arguments creates an HLL value (9 ms) [ok]: CLUSTER RESET can not be invoke from within a script (7 ms) [ok]: Approximated cardinality after creation is zero (4 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (6 ms) [ok]: PFADD returns 0 when no reg was modified (3 ms) [ok]: PFADD works with empty string (regression) (4 ms) [ok]: PFCOUNT returns approximated cardinality of set (26 ms) [ok]: Script with RESP3 map (46 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (319 ms) [ok]: Script return recursive object (125 ms) [ok]: Script check unpack with massive arguments (41 ms) [ok]: Script read key with expiration set (11 ms) [ok]: Script del key with expiration set (6 ms) [ok]: Script ACL check (18 ms) [ok]: Binary code loading failed (2 ms) [ok]: Try trick global protection 1 (2 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (2 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (0 ms) [ok]: Memory efficiency with values in range 1024 (562 ms) [ok]: UNLINK can reclaim memory in background (340 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (289 ms) [ok]: TOUCH alters the last access time of a key (3016 ms) [ok]: HyperLogLogs are promote from sparse to dense (494 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [54/92 done]: unit/bitops (4 seconds) Testing unit/wait [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (38 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (353 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 63908) (30 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (15 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (5 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (69 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (5005 ms) [ok]: Timedout script does not cause a false dead client (54 ms) [ok]: Setup slave (103 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (2 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (11 ms) [ok]: Timedout script link is still usable after Lua returns (74 ms) [ok]: redis-server command line arguments - save with empty input (1352 ms) [ok]: lazy free a stream with all types of metadata (463 ms) [ok]: lazy free a stream with deleted cgroup (14 ms) [ok]: BITFIELD overflow detection fuzzing (3708 ms) [ok]: HyperLogLog sparse encoding stress test (712 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [55/92 done]: unit/lazyfree (2 seconds) Testing unit/pause [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (412 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (267 ms) [ok]: Timedout scripts and unblocked command (388 ms) [ok]: Test read commands are not blocked by client pause (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: BITFIELD overflow wrap fuzzing (269 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (2 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1131 ms) [ok]: TOUCH returns the number of existing keys specified (13 ms) [ok]: command stats for GEOADD (17 ms) [ok]: errors stats for GEOADD (22 ms) [ok]: command stats for EXPIRE (16 ms) [ok]: command stats for BRPOP (15 ms) [ok]: command stats for MULTI (6 ms) [ok]: cannot modify protected configuration - no (10 ms) [ok]: command stats for scripts (22 ms) [ok]: COMMAND COUNT get total number of Redis commands (3 ms) [ok]: COMMAND GETKEYS GET (3 ms) [ok]: COMMAND GETKEYSANDFLAGS (14 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (3 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (4 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (213 ms) [ok]: COMMAND GETKEYS XGROUP (6 ms) [ok]: COMMAND GETKEYS EVAL with keys (3 ms) [ok]: COMMAND GETKEYS EVAL without keys (4 ms) [ok]: COMMAND GETKEYS LCS (3 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (5 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (16 ms) [ok]: COMMAND LIST syntax error (8 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (5 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (5 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (3 ms) [ok]: Memory efficiency with values in range 16384 (1474 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (30 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (3 ms) [ok]: COMMAND INFO of invalid subcommands (7 ms) [ok]: SET command will not be marked with movablekeys (3 ms) [ok]: GET command will not be marked with movablekeys (4 ms) [ok]: MSET command will not be marked with movablekeys (3 ms) [ok]: BITFIELD command will not be marked with movablekeys (3 ms) [ok]: LMOVE command will not be marked with movablekeys (4 ms) [ok]: LPOP command will not be marked with movablekeys (3 ms) [ok]: BLPOP command will not be marked with movablekeys (3 ms) [ok]: PING command will not be marked with movablekeys (3 ms) [ok]: MEMORY command will not be marked with movablekeys (3 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (3 ms) [ok]: RENAME command will not be marked with movablekeys (4 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (3 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (335 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (3 ms) [ok]: XREAD command is marked with movablekeys (4 ms) [ok]: EVAL command is marked with movablekeys (3 ms) [ok]: SORT command is marked with movablekeys (4 ms) [ok]: SORT_RO command is marked with movablekeys (3 ms) [ok]: MIGRATE command is marked with movablekeys (3 ms) [ok]: GEORADIUS command is marked with movablekeys (7 ms) [56/92 done]: unit/memefficiency (4 seconds) Testing unit/querybuf [ok]: Test new pause time is smaller than old one, then old time preserved (104 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: cannot modify protected configuration - local (6 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (8 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (3 ms) [57/92 done]: unit/introspection-2 (8 seconds) Testing unit/tls [ok]: Test RO scripts are not blocked by pause RO (7 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (8 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (3 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: Test both active and passive expires are skipped during client pause (103 ms) [ok]: BITFIELD: setup slave (116 ms) [ok]: Test that client pause starts at the end of a transaction (3 ms) [ok]: Before the replica connects we issue two EVAL commands (6 ms) [ok]: BITFIELD: write on master, read on slave (26 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (4 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (3 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1084 ms) [ok]: Connect a replica to the master instance (117 ms) [ok]: Now use EVALSHA against the master, with both SHAs (6 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (3 ms) [ok]: Replication of script multiple pushes to list with BLPOP (12 ms) [58/92 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: EVALSHA replication when first call is readonly (15 ms) [ok]: Lua scripts using SELECT are replicated correctly (13 ms) [59/92 done]: unit/bitfield (5 seconds) Testing unit/oom-score-adj [ok]: Test when replica paused, offset would not grow (16 ms) [ok]: Test replica offset would grow after unpause (10 ms) [ok]: Clients are able to enable tracking and redirect it (3 ms) [ok]: The other connection is able to get invalidations (15 ms) [ok]: The client is now able to disable tracking (6 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (4 ms) [ok]: The connection gets invalidation messages about all the keys (3 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (7 ms) [ok]: Clients can enable the BCAST mode with prefixes (30 ms) [ok]: Adding prefixes to BCAST mode works (7 ms) [ok]: Tracking NOLOOP mode in standard mode works (16 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (17 ms) [60/92 done]: unit/pause (1 seconds) Testing unit/shutdown [ok]: CONFIG SET oom-score-adj works as expected (63 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (44 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (6 ms) [ok]: CONFIG SET oom score restored on disable (13 ms) [ok]: CONFIG SET oom score relative and absolute (11 ms) [ok]: CONFIG SET out-of-range oom score (9 ms) [61/92 done]: unit/oom-score-adj (0 seconds) Testing unit/networking [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (190 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (3 ms) [ok]: CONFIG SET port number (322 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (47 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1123 ms) [ok]: PSYNC2 #3899 regression: verify consistency (26 ms) [ok]: Temp rdb will be deleted in signal handle (108 ms) [ok]: CONFIG SET bind address (200 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (2030 ms) [ok]: RDB save will be failed in shutdown (47 ms) [ok]: Tracking gets notification of expired keys (1024 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (115 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (13 ms) [ok]: Connect a replica to the master instance (129 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (16 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (7 ms) [ok]: Clean up rdb same named folder (6 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (7 ms) [ok]: Redis.set_repl() don't accept invalid values (7 ms) [ok]: Tracking gets notification of lazy expired keys (146 ms) [ok]: HELLO 3 reply is correct (6 ms) [ok]: HELLO without protover (21 ms) [ok]: Test selective replication of certain Redis commands from Lua (39 ms) [ok]: PRNG is seeded randomly for command replication (7 ms) [ok]: RESP3 based basic invalidation (23 ms) [ok]: Using side effects is not a problem with command replication (21 ms) [ok]: RESP3 tracking redirection (20 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (20 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (13 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (20 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (52 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (14 ms) [ok]: Different clients can redirect to the same connection (28 ms) [ok]: Different clients using different protocols can track the same key (43 ms) [ok]: config during loading (1901 ms) [ok]: No invalidation message when using OPTIN option (53 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (90 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (29 ms) [ok]: Invalidation message sent when using OPTOUT option (24 ms) [ok]: CONFIG SET bind-source-addr (729 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (30 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (6 ms) [ok]: Able to redirect to a RESP3 client (33 ms) [62/92 done]: unit/shutdown (2 seconds) Testing unit/client-eviction [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (46 ms) [ok]: BCAST with prefix collisions throw errors (50 ms) [ok]: hdel deliver invalidate message after response in the same connection (40 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1126 ms) [ok]: client evicted due to large argv (71 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (171 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (47 ms) [ok]: client evicted due to large query buf (52 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (79 ms) [63/92 done]: integration/psync2-reg (23 seconds) Testing unit/violations [ok]: Tracking invalidation message of eviction keys should be before response (56 ms) [ok]: client evicted due to percentage of maxmemory (63 ms) [ok]: Unblocked BLMOVE gets notification after response (13 ms) [ok]: Tracking gets notification on tracking table key eviction (64 ms) [ok]: CONFIG REWRITE handles rename-command properly (685 ms) [ok]: client evicted due to large multi buf (121 ms) [ok]: Invalidation message received for flushall (47 ms) [ok]: Invalidation message received for flushdb (39 ms) [ok]: Default bind address configuration handling (430 ms) [ok]: Protected mode works as expected (6 ms) [ok]: SORT adds integer field to list (33 ms) [ok]: Test ASYNC flushall (56 ms) [64/92 done]: unit/networking (2 seconds) Testing unit/replybufsize [ok]: flushdb tracking invalidation message is not interleaved with transaction response (90 ms) [65/92 done]: unit/violations (1 seconds) Testing unit/cluster/announced-endpoints [ok]: query buffer resized correctly (2839 ms) [ok]: Test scripting debug protocol parsing (9 ms) [ok]: Test scripting debug lua stack overflow (22 ms) [ok]: query buffer resized correctly when not idle (61 ms) [ok]: WAITAOF local copy before fsync (93 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (303 ms) [ok]: PSYNC2: cluster is consistent after failover (30 ms) [ok]: Tracking info is correct (51 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (13 ms) [ok]: CLIENT GETREDIR provides correct client id (32 ms) [ok]: test RESP2/2 true protocol parsing (6 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (24 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (3 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (12 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (4 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (8 ms) [ok]: TIME command using cached time (12 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (26 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (27 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (17 ms) [ok]: Script block the time in some expiration related commands (96 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (52 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: Regression test for #11715 (47 ms) [ok]: RESP3 based basic invalidation with client reply off (47 ms) [ok]: RESP2 based basic invalidation with client reply off (103 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (73 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (60 ms) [ok]: Shebang support for lua engine (6 ms) [ok]: Unknown shebang option (3 ms) [ok]: Unknown shebang flag (3 ms) [ok]: verify reply buffer limits (724 ms) [ok]: allow-oom shebang flag (41 ms) [ok]: no-writes shebang flag (3 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (2391 ms) [66/92 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9262 ms) [ok]: CONFIG REWRITE handles alias config properly (1264 ms) [67/92 done]: unit/introspection (11 seconds) Testing unit/cluster/cli [ok]: Coverage: Basic CLIENT CACHING (27 ms) [ok]: Coverage: Basic CLIENT REPLY (7 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (6 ms) [ok]: Coverage: Basic CLIENT GETREDIR (3 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (302 ms) [ok]: WAITAOF local copy everysec (1118 ms) [ok]: Client output buffer hard limit is enforced (9759 ms) [ok]: WAITAOF local copy with appendfsync always (28 ms) [68/92 done]: unit/tracking (4 seconds) Testing unit/cluster/scripting [ok]: no-writes shebang flag on replica (210 ms) [ok]: WAITAOF local wait and then stop aof (34 ms) [ok]: WAITAOF local on server with aof disabled (5 ms) [ok]: not enough good replicas (37 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (296 ms) [ok]: Slave should be able to synchronize with the master (125 ms) [ok]: WAITAOF local if AOFRW was postponed (393 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (303 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (3 ms) [ok]: WAITAOF replica copy before fsync (99 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (401 ms) [ok]: not enough good replicas state change during long script (933 ms) [ok]: allow-stale shebang flag (53 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (395 ms) [ok]: reject script do not cause a Lua stack leak (216 ms) [ok]: client evicted due to watched key list (3135 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (153 ms) [ok]: query buffer resized correctly with fat argv (2916 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (416 ms) [69/92 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: Test change cluster-announce-bus-port at runtime (134 ms) [ok]: CONFIG SET port updates cluster-announced port (16 ms) [ok]: Consistent eval error reporting (233 ms) [ok]: LUA redis.error_reply API (13 ms) [ok]: LUA redis.error_reply API with empty string (10 ms) [ok]: LUA redis.status_reply API (7 ms) [ok]: LUA test pcall (6 ms) [ok]: LUA test pcall with error (3 ms) [ok]: LUA test pcall with non string/integer arg (6 ms) [ok]: LUA test trim string as expected (3 ms) [70/92 done]: unit/scripting (19 seconds) Testing unit/cluster/human-announced-nodename [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (395 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (20 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (23 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (7 ms) [ok]: Create 3 node cluster (1953 ms) [ok]: Function no-cluster flag (10 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Script no-cluster flag (0 ms) [71/92 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/multi-slot-operations [ok]: Perform a Resharding (121 ms) [72/92 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/slot-ownership [ok]: Verify command got unblocked after resharding (61 ms) [ok]: client evicted due to pubsub subscriptions (852 ms) [ok]: Key lazy expires during key migration (39 ms) [ok]: Coverage: Basic cluster commands (40 ms) [ok]: WAITAOF replica copy everysec (1717 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (416 ms) [ok]: Wait for cluster to be stable (254 ms) [ok]: client evicted due to tracking redirection (249 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (76 ms) [ok]: Sanity test push cmd after resharding (20 ms) [ok]: Run blocking command again on cluster node1 (14 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (342 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (342 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1050 ms) [73/92 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/links [ok]: maxmemory - policy volatile-random should only remove volatile keys. (345 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (3809 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (340 ms) [ok]: PSYNC2: generate load while killing replication links (5004 ms) [ok]: PSYNC2: cluster is consistent after load (x = 64738) (26 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (20 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (13 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (6 ms) [ok]: Detect write load to master (4028 ms) [ok]: Kill a cluster node and wait for fail state (1780 ms) [ok]: Verify command got unblocked after cluster failure (17 ms) [ok]: Set cluster human announced nodename and let it propagate (164 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (6 ms) [ok]: Continuous slots distribution (118 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (3 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (5 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (30 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (250 ms) [ok]: Set cluster hostnames and verify they are propagated (256 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2053 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (144 ms) [ok]: Update hostnames and make sure they are all eventually propagated (350 ms) [ok]: WAITAOF replica copy appendfsync always (30 ms) [74/92 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/cluster-response-tls [75/92 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Remove hostnames and make sure they are all eventually propagated (337 ms) [76/92 done]: unit/cluster/slot-ownership (4 seconds) Testing unit/cluster/sharded-pubsub [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (203 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (187 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (15173 ms) [ok]: client evicted due to client tracking prefixes (4558 ms) [ok]: client evicted due to output buf (15 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: client no-evict on (78 ms) [ok]: client no-evict off (42 ms) [ok]: AOF rewrite during write load: RDB preamble=no (39370 ms) [ok]: WAITAOF replica copy if replica is blocked (2026 ms) [ok]: avoid client eviction when client is freed by output buffer limit (167 ms) [ok]: Turning off AOF kills the background writing child if any (160 ms) [ok]: AOF rewrite of list with listpack encoding, string data (180 ms) [ok]: PSYNC2: cluster is consistent after failover (10 ms) [ok]: Human nodenames are visible in log messages (3596 ms) [ok]: Sharded pubsub publish behavior within multi/exec (30 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (1 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (34 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (22 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (30 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (20 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (4967 ms) [77/92 done]: unit/cluster/human-announced-nodename (7 seconds) [ok]: decrease maxmemory-clients causes client eviction (684 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1030 ms) [ok]: No response for single command if client output buffer hard limit is enforced (122 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3396 ms) [ok]: WAITAOF on promoted replica (181 ms) [ok]: Each node has two links with each peer (26 ms) [ok]: Validate cluster links format (4 ms) [78/92 done]: unit/cluster/sharded-pubsub (3 seconds) [ok]: evict clients only until below limit (320 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1050 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (12 ms) [ok]: evict clients in right order (large to small) (158 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (18 ms) [ok]: Obuf limit, KEYS stopped mid-run (95 ms) [79/92 done]: unit/obuf-limits (20 seconds) [ok]: AOF rewrite of list with quicklist encoding, string data (1980 ms) [ok]: AOF rewrite of list with listpack encoding, int data (106 ms) [ok]: client total memory grows during client no-evict (171 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4193 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (211 ms) [ok]: client total memory grows during maxmemory-clients disabled (171 ms) [ok]: AOF rewrite of set with intset encoding, string data (106 ms) [80/92 done]: unit/client-eviction (12 seconds) [ok]: Test restart will keep hostname information (298 ms) [ok]: Test hostname validation (3 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (194 ms) [ok]: AOF rewrite of set with intset encoding, int data (110 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2025 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (334 ms) [ok]: Verify that single primary marks replica as failed (3187 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (105 ms) [81/92 done]: unit/cluster/hostnames (9 seconds) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (867 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (1021 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (105 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (187 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (105 ms) [ok]: WAITAOF master isn't configured to do AOF (1016 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (225 ms) [ok]: WAITAOF replica isn't configured to do AOF (150 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (105 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 107084) (5 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (200 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (3 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (2 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [ok]: AOF rewrite functions (104 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (216 ms) [ok]: BGREWRITEAOF is refused if already in progress (30 ms) [82/92 done]: unit/aofrw (63 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9422 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (947 ms) [ok]: Migrate the last slot away from a node using redis-cli (4910 ms) [ok]: Slave should be able to synchronize with the master (130 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (56 ms) [ok]: WAITAOF master sends PING after last write (1230 ms) [ok]: Slave should be able to synchronize with the master (124 ms) [ok]: Detect write load to master (1005 ms) [ok]: WAITAOF master client didn't send any write command (1223 ms) [ok]: redis-cli --cluster create with cluster-port (1880 ms) [ok]: WAITAOF master client didn't send any command (1220 ms) [ok]: Disconnect link when send buffer limit reached (9049 ms) [ok]: redis-cli --cluster add-node with cluster-port (1293 ms) [ok]: PSYNC2: generate load while killing replication links (5003 ms) [ok]: PSYNC2: cluster is consistent after load (x = 113506) (30 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (30 ms) [ok]: PSYNC2: Bring the master back again for next test (56 ms) [ok]: GEOSEARCH fuzzy test - byradius (26140 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (274 ms) [83/92 done]: unit/cluster/cli (20 seconds) [ok]: Link memory increases with publishes (713 ms) [ok]: Link memory resets after publish messages flush (333 ms) [84/92 done]: unit/cluster/links (16 seconds) [85/92 done]: integration/psync2 (45 seconds) [ok]: Verify that multiple primaries mark replica as failed (6287 ms) [86/92 done]: unit/cluster/failure-marking (14 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3827 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6348 ms) [ok]: Slave should be able to synchronize with the master (124 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2573 ms) [ok]: Detect write load to master (1008 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (17157 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1647 ms) [ok]: setup replication for following tests (130 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (613 ms) [87/92 done]: unit/wait (33 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7865 ms) [ok]: Slave should be able to synchronize with the master (124 ms) [ok]: Detect write load to master (6 ms) [ok]: slave buffer are counted correctly (28768 ms) [ok]: GEOSEARCH fuzzy test - bybox (15977 ms) [ok]: GEOSEARCH box edges fuzzy test (1290 ms) [88/92 done]: unit/geo (44 seconds) [ok]: replica buffer don't induce eviction (6386 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (273 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (15283 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9376 ms) [ok]: Slave should be able to synchronize with the master (204 ms) [ok]: Detect write load to master (1004 ms) [ok]: client tracking don't cause eviction feedback loop (4705 ms) [ok]: propagation with eviction (134 ms) [ok]: propagation with eviction in MULTI (123 ms) [ok]: lru/lfu value of the key just added (2 ms) [89/92 done]: unit/maxmemory (61 seconds) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (51654 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (15 ms) [ok]: PFMERGE results on the cardinality of union of sets (17 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (33 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (19 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (30 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (5710 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9276 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1810 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1021 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [90/92 done]: unit/hyperloglog (62 seconds) [ok]: Slave should be able to synchronize with the master (1787 ms) [ok]: Detect write load to master (6 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (54 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (1007 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (19710 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (14 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (573 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (10 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6295 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (13 ms) [ok]: Slave should be able to synchronize with the master (1883 ms) [ok]: Detect write load to master (3 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (430 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (890 ms) [ok]: Busy script during async loading (890 ms) [ok]: Blocked commands and configs during async-loading (523 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (20 ms) Waiting for process 6081 to exit... Waiting for process 6081 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7968 ms) Waiting for process 6081 to exit... [ok]: Slave should be able to synchronize with the master (747 ms) [ok]: Detect write load to master (0 ms) Waiting for process 6081 to exit... Waiting for process 6081 to exit... Waiting for process 6081 to exit... [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9247 ms) [ok]: Slave should be able to synchronize with the master (8163 ms) [ok]: Detect write load to master (7 ms) Waiting for process 6812 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (10590 ms) Waiting for process 6812 to exit... [ok]: diskless loading short read (24535 ms) [ok]: Slave should be able to synchronize with the master (673 ms) [ok]: Detect write load to master (3020 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (87 ms) [ok]: Slave should be able to synchronize with the master (677 ms) [ok]: Detect write load to master (7 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6363 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (1 ms) [ok]: diskless no replicas drop during rdb pipe (12383 ms) [ok]: diskless slow replicas drop during rdb pipe (6690 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7956 ms) [ok]: Slave should be able to synchronize with the master (734 ms) [ok]: Detect write load to master (1003 ms) [ok]: diskless fast replicas drop during rdb pipe (8793 ms) [ok]: diskless all replicas drop during rdb pipe (2137 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9448 ms) [ok]: Slave should be able to synchronize with the master (1811 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless timeout replicas drop during rdb pipe (6624 ms) [ok]: diskless replication child being killed is collected (1531 ms) [ok]: replication child dies when parent is killed - diskless: yes (1369 ms) [ok]: replication child dies when parent is killed - diskless: no (2007 ms) [ok]: diskless replication read pipe cleanup (1253 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10525 ms) [91/92 done]: integration/replication-psync (189 seconds) [ok]: replicaof right after disconnection (1912 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (1232 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (7 ms) [ok]: Discard cache master before loading transferred RDB when full sync (14 ms) [ok]: replica can handle EINTR if use diskless load (742 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (70 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (143 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (47 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (127 ms) [ok]: PSYNC with wrong offset should throw error (6 ms) [ok]: Test replication with lazy expire (187 ms) [92/92 done]: integration/replication (200 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [92/92 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [92/92 done]: set-large-memory (1 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [92/92 done]: bitops-large-memory (0 seconds) Testing solo test [92/92 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [92/92 done]: violations (2 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 1 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/auth 3 seconds - unit/info 6 seconds - unit/keyspace 0 seconds - unit/quit 7 seconds - unit/type/hash 8 seconds - unit/type/stream-cgroups 7 seconds - unit/multi 9 seconds - unit/sort 2 seconds - unit/acl-v2 10 seconds - unit/type/string 6 seconds - unit/acl 13 seconds - unit/type/list-2 14 seconds - unit/other 15 seconds - unit/expire 7 seconds - unit/latency-monitor 19 seconds - unit/type/list 20 seconds - unit/scan 0 seconds - integration/aof-race 10 seconds - integration/replication-2 21 seconds - unit/type/stream 14 seconds - integration/replication-3 28 seconds - unit/type/set 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 13 seconds - integration/shutdown 1 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 30 seconds - unit/dump 32 seconds - unit/type/zset 12 seconds - integration/rdb 15 seconds - integration/aof 15 seconds - integration/aof-multi-part 20 seconds - integration/replication-buffer 27 seconds - integration/block-repl 3 seconds - integration/redis-benchmark 6 seconds - integration/failover 1 seconds - unit/pubsub 2 seconds - unit/pubsubshard 2 seconds - unit/slowlog 30 seconds - integration/replication-4 7 seconds - integration/dismiss-mem 23 seconds - integration/corrupt-dump 13 seconds - integration/psync2-master-restart 5 seconds - unit/functions 2 seconds - unit/limits 20 seconds - integration/corrupt-dump-fuzzer 13 seconds - integration/redis-cli 18 seconds - integration/psync2-pingoff 48 seconds - unit/type/list-3 4 seconds - unit/bitops 2 seconds - unit/lazyfree 4 seconds - unit/memefficiency 8 seconds - unit/introspection-2 0 seconds - unit/tls 5 seconds - unit/bitfield 1 seconds - unit/pause 0 seconds - unit/oom-score-adj 2 seconds - unit/shutdown 23 seconds - integration/psync2-reg 2 seconds - unit/networking 1 seconds - unit/violations 1 seconds - unit/replybufsize 11 seconds - unit/introspection 4 seconds - unit/tracking 6 seconds - unit/querybuf 19 seconds - unit/scripting 3 seconds - unit/cluster/announced-endpoints 2 seconds - unit/cluster/scripting 4 seconds - unit/cluster/misc 4 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 7 seconds - unit/cluster/human-announced-nodename 3 seconds - unit/cluster/sharded-pubsub 20 seconds - unit/obuf-limits 12 seconds - unit/client-eviction 9 seconds - unit/cluster/hostnames 63 seconds - unit/aofrw 20 seconds - unit/cluster/cli 16 seconds - unit/cluster/links 45 seconds - integration/psync2 14 seconds - unit/cluster/failure-marking 33 seconds - unit/wait 44 seconds - unit/geo 61 seconds - unit/maxmemory 62 seconds - unit/hyperloglog 189 seconds - integration/replication-psync 200 seconds - integration/replication 0 seconds - list-large-memory 1 seconds - set-large-memory 0 seconds - bitops-large-memory 2 seconds - defrag 2 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' >>> redis-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/init.d' >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.9-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 1.7 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.9-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redis*: Package size: 3.5 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.9-r0.apk >>> redis: Build complete at Fri, 30 May 2025 00:29:44 +0000 elapsed time 0h 4m 0s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250530.002545) (2/8) Purging linux-headers (6.6-r1) (3/8) Purging openssl-dev (3.3.3-r0) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r12.trigger OK: 396 MiB in 102 packages >>> redis: Updating the community/aarch64 repository index... >>> redis: Signing the index...