>>> redict: Building community/redict 7.3.3-r1 (using abuild 3.14.1-r4) started Thu, 29 May 2025 22:01:48 +0000 >>> redict: Validating /home/buildozer/aports/community/redict/APKBUILD... >>> redict: Analyzing dependencies... >>> redict: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r1) (2/8) Installing openssl-dev (3.3.3-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redict (20250529.220149) Executing busybox-1.37.0-r12.trigger OK: 258 MiB in 107 packages >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Cleaning up tmpdir >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.3.tar.gz >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.3.tar.gz >>> redict: Checking sha512sums... redict-7.3.3.tar.gz: OK redict.conf.patch: OK sentinel.conf.patch: OK redict.initd: OK redict.confd: OK redict-sentinel.initd: OK redict.logrotate: OK CVE-2025-27151.patch: OK >>> redict: Unpacking /var/cache/distfiles/redict-7.3.3.tar.gz... >>> redict: redict.conf.patch patching file redict.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 489 (offset 67 lines). >>> redict: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). >>> redict: CVE-2025-27151.patch patching file src/redict-check-aof.c make -C src all make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep rm -rf redict-server redict-sentinel redict-cli redict-benchmark redict-check-rdb redict-check-aof *.o *.gcda *.gcno *.gcov redict.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redict-check-rdb.d redict-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redict-cli.d zmalloc.d release.d ae.d redictassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redict-benchmark.d adlist.d dict.d zmalloc.d redictassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDICT_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDICT_CFLAGS= >> .make-settings echo REDICT_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDICT_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/hiredict -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredict linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredict MAKE linenoise cd hiredict && make static USE_SSL=1 MAKE lua cd linenoise && make cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2" MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic hiredict.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic async.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic read.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c ar rcs libfpconv.a fpconv_dtoa.o gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' ar rcs libhiredict.a alloc.o net.o hiredict.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a ar rcs libhiredict_ssl.a ssl.o gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redict-check-rdb.o CC redict-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redict-cli.o CC redictassert.o CC cli_common.o CC cli_commands.o CC redict-benchmark.o LINK redict-benchmark LINK redict-cli LINK redict-server INSTALL redict-sentinel INSTALL redict-check-rdb INSTALL redict-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' make -C src test make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep CC release.o LINK redict-server LINK redict-cli LINK redict-benchmark INSTALL redict-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 18426 Testing unit/printver [ready]: 18427 Testing unit/dump [ready]: 18429 Testing unit/auth [ready]: 18430 Testing unit/protocol [ready]: 18428 Testing unit/keyspace [ready]: 18431 Testing unit/scan [ready]: 18432 Testing unit/info [ready]: 18433 Testing unit/info-command [ready]: 18434 Testing unit/type/string [ready]: 18435 Testing unit/type/incr [ready]: 18436 Testing unit/type/list [ready]: 18437 Testing unit/type/list-2 [ready]: 18438 Testing unit/type/list-3 [ready]: 18439 Testing unit/type/set [ready]: 18440 Testing unit/type/zset [ready]: 18441 Testing unit/type/hash Testing Redict version 7.3.3 (00000000) [ok]: AUTH fails if there is no password configured server side (1 ms) [ok]: Arity check for auth command (0 ms) [ok]: DEL against a single item (1 ms) [ok]: Vararg DEL (1 ms) [ok]: Untagged multi-key commands (1 ms) [ok]: INCR against non existing key (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: SET and GET an item (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (4 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: info command with at most one sub command (4 ms) [ok]: KEYS to get all keys (0 ms) [ok]: DECR against key created by incr (1 ms) [ok]: SET and GET an empty item (1 ms) [ok]: DBSIZE (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: KEYS with hashtag (1 ms) [ok]: Explicit regression for a list bug (2 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (2 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: DEL all keys (2 ms) [ok]: info command with multiple sub-sections (2 ms) [ok]: INCR over 32bit value (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (2 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (2 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: RESTORE can set an absolute expire (2 ms) [ok]: packed node check compression with insert and pop (5 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: Check encoding - listpack (1 ms) [ok]: packed node check compression combined with trim (1 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: packed node check compression with lset (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: RESTORE can set LRU (2 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (1 ms) [ok]: INCRBYFLOAT against non existing key (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value (1 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: RESTORE can set LFU (2 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: RESTORE returns an error of the key already exists (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (2 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: No negative zero (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (1 ms) [ok]: HRANDFIELD - listpack (8 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (13 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (2 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (2 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (1 ms) [ok]: SADD against non set (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (1 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: HRANDFIELD - hashtable (8 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: SADD a non-integer against a large intset (11 ms) [ok]: ZRANK/ZREVRANK basics - listpack (2 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (0 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (4 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: Handle an empty query (46 ms) [ok]: SADD an integer larger than 64 bits to a large intset (12 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (5 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (4 ms) [ok]: ZLEXCOUNT advanced - listpack (2 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (5 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: Very big payload in GET/SET (57 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (11 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (41 ms) [ok]: Negative multibulk length (44 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (74 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: ZREMRANGEBYLEX basics - listpack (15 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (1 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: {standalone} SCAN basic (96 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (2 ms) [1/91 done]: unit/info-command (0 seconds) Testing unit/type/stream [ok]: ZUNIONSTORE basics - listpack (1 ms) [2/91 done]: unit/printver (0 seconds) Testing unit/type/stream-cgroups [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (3 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (15 ms) [ok]: ZUNION with weights - listpack (0 ms) [3/91 done]: unit/type/incr (0 seconds) Testing unit/sort [ok]: ZUNIONSTORE with a regular set and weights - listpack (2 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (1 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: latencystats: disable/enable (2 ms) [ok]: latencystats: configure percentiles (3 ms) [ok]: latencystats: bad configure percentiles (2 ms) [ok]: latencystats: blocking commands (3 ms) [ok]: latencystats: subcommands (2 ms) [ok]: Protocol desync regression test #1 (41 ms) [ok]: Regression for quicklist #3343 bug (139 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: Protocol desync regression test #2 (40 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (2 ms) [ok]: errorstats: failed call within MULTI/EXEC (3 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [ok]: errorstats: failed call within LUA (3 ms) [ok]: Variadic SADD (1 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: errorstats: failed call NOGROUP error (2 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: errorstats: rejected call within MULTI/EXEC (4 ms) [ok]: {standalone} SCAN COUNT (107 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: HRANDFIELD with - hashtable (177 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: errorstats: blocking commands (4 ms) [ok]: Protocol desync regression test #3 (40 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (2 ms) [ok]: test verbatim str parsing (0 ms) [ok]: XADD wrong number of args (1 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (2 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (2 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (2 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: XREADGROUP can read the history of the elements we own (2 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (1 ms) [ok]: XPENDING only group (1 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: Check compression with recompress (91 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (0 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: test large number of args (55 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (23 ms) [ok]: Blocking XREADGROUP: key deleted (2 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (2 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (2 ms) [ok]: {standalone} SCAN MATCH (87 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (0 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (2 ms) [ok]: MIGRATE is caching connections (225 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (23 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (3 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (4 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: HRANDFIELD with - listpack (158 ms) [ok]: plain node check compression with insert and pop (371 ms) [ok]: errorstats: limit errors will not increase indefinitely (165 ms) [ok]: XADD with MAXLEN option (173 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: {standalone} SCAN TYPE (137 ms) [ok]: Set encoding after DEBUG RELOAD (242 ms) [ok]: SREM basics - $type (1 ms) [ok]: SREM basics - $type (12 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Crash due to wrongly recompress after lrem (224 ms) [ok]: HSET/HLEN - Big hash creation (125 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: HGET against the small hash (1 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (48 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: plain node check compression combined with trim (134 ms) [ok]: {standalone} SCAN unknown type (93 ms) [ok]: XADD with MAXLEN option and the '=' argument (124 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (26 ms) [4/91 done]: unit/protocol (0 seconds) Testing unit/expire [ok]: SUNION with two sets - regular (10 ms) [ok]: SUNIONSTORE with two sets - regular (13 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (51 ms) [ok]: SINTERSTORE with three sets - regular (1 ms) [ok]: SUNION with non existing keys - regular (9 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: Quicklist: SORT BY key (16 ms) [ok]: Quicklist: SORT BY key with limit (2 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (8 ms) [ok]: HGET against the big hash (88 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (1 ms) [ok]: HMSET - small hash (0 ms) [ok]: Quicklist: SORT BY hash field (16 ms) [ok]: {standalone} SCAN with expired keys (102 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: XADD with MAXLEN option and the '~' argument (118 ms) [ok]: HMSET - big hash (64 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: XADD with NOMKSTREAM option (2 ms) [ok]: Hash commands against wrong type (3 ms) [ok]: HMGET - small hash (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (21 ms) [ok]: SUNION with two sets - intset (9 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (1 ms) [ok]: SUNIONSTORE with two sets - intset (10 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (9 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: plain node check compression with lset (175 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (6 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: HMGET - big hash (60 ms) [ok]: HKEYS - small hash (1 ms) [ok]: HKEYS - big hash (14 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (99 ms) [ok]: HVALS - small hash (0 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (34 ms) [ok]: {standalone} SSCAN with encoding intset (3 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: {standalone} SSCAN with encoding listpack (2 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: {standalone} SSCAN with encoding hashtable (5 ms) [ok]: {standalone} HSCAN with encoding listpack (2 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (0 ms) [ok]: HGETALL - big hash (39 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (1 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (1 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (1 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: XADD with MINID option (151 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: {standalone} HSCAN with encoding hashtable (100 ms) [ok]: {standalone} ZSCAN with encoding listpack (2 ms) [ok]: Test LPUSH and LPOP on plain nodes (22 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: HSTRLEN against the big hash (90 ms) [ok]: HSTRLEN against non existing field (1 ms) [ok]: HSTRLEN corner cases (3 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: {standalone} ZSCAN with encoding skiplist (87 ms) [ok]: Hash fuzzing #1 - 10 fields (38 ms) [ok]: Hash fuzzing #2 - 10 fields (19 ms) [ok]: {standalone} SCAN guarantees check under write load (28 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {standalone} SSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (1 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: Test LSET with packed / plain combinations (140 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (123 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (1 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (1 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (2 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (1 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: COPY basic usage for list - quicklist (46 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: Test LSET with packed consist only one item (186 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: COPY basic usage for $type set (21 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (12 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: COPY basic usage for skiplist sorted set (15 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (18 ms) [ok]: Test LSET with packed / plain combinations (177 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: COPY basic usage for stream (156 ms) [ok]: COPY basic usage for stream-cgroups (9 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (1 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (7 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1092 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (5 ms) [ok]: RENAME can unblock XREADGROUP with data (2 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (2 ms) [ok]: Regression for pattern matching very long nested loops (49 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (2 ms) [5/91 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: Test LSET with packed consist only one item (183 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: Coverage: HELP commands (2 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: SAVE - make sure there are all the types as values (12 ms) [ok]: LPOS basic usage - quicklist (44 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (88 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (2 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (1 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (45 ms) [ok]: XCLAIM can claim PEL items from another consumer (606 ms) [ok]: BLPOP: multiple existing lists - quicklist (88 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: BLPOP: second list has an entry - quicklist (44 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (44 ms) [ok]: stats: debug metrics (113 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (92 ms) [ok]: stats: client input and output buffer limit disconnections (66 ms) [ok]: clients: pubsub clients (4 ms) [ok]: clients: watching clients (14 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (48 ms) [ok]: FUZZ stresser with data model binary (686 ms) [ok]: BRPOPLPUSH - quicklist (44 ms) [ok]: BLMOVE left left - quicklist (48 ms) [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: BLMOVE left right - quicklist (48 ms) [ok]: BLMOVE right left - quicklist (49 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (4 ms) [ok]: BLMOVE right right - quicklist (47 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (3 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (3 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (2 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (2 ms) [ok]: BLMOVE right right - listpack (2 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (2 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (4 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (2 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [6/91 done]: unit/info (3 seconds) Testing unit/multi [ok]: BRPOPLPUSH inside a transaction (2 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (2 ms) [ok]: XCLAIM same consumer (203 ms) [ok]: Hash fuzzing #1 - 512 fields (1732 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (1 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (0 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: FUZZ stresser with data model alpha (758 ms) [ok]: Very big payload random access (3031 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (605 ms) [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (2 ms) [ok]: XAUTOCLAIM with XDEL and count (2 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XINFO FULL output (5 ms) [ok]: BRPOPLPUSH timeout (1014 ms) [ok]: SWAPDB awakes blocked client (2 ms) [ok]: Consumer seen-time and active-time (208 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (2 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: XADD mass insertion and XLEN (2965 ms) [ok]: XADD with ID 0-0 (1 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [ok]: FUZZ stresser with data model compr (755 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (221 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: Hash fuzzing #2 - 512 fields (1196 ms) [ok]: XREADGROUP with NOACK creates consumer (146 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: WATCH will consider touched expired keys (1105 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (53 ms) [ok]: Big Quicklist: SORT BY key (794 ms) [ok]: Big Quicklist: SORT BY key with limit (29 ms) [ok]: MULTI / EXEC is not propagated (single write command) (152 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (299 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: XRANGE can be used to iterate the whole stream (521 ms) [ok]: BGSAVE (191 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (100 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (512 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: Consumer group read counter and lag sanity (6 ms) [ok]: Consumer group lag with XDELs (11 ms) [ok]: Loading from legacy (Redict <= v6.2.x, rdb_ver < 10) persistence (2 ms) [ok]: Loading from legacy (Redict <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: MULTI / EXEC with REPLICAOF (103 ms) [ok]: DISCARD should not fail during OOM (2 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (105 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (103 ms) [ok]: Big Quicklist: SORT BY hash field (803 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1927 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: PSETEX can set sub-second expires (103 ms) [ok]: MULTI and script timeout (405 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1006 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: ZDIFF fuzzing - listpack (5107 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (3 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (3 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (106 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (2 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (4 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: XREADGROUP ACK would propagate entries-read (4 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (4 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (2 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (1 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: BLPOP when new key is moved into place (103 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: Hash table: SORT BY key (17 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (2 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (3 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: Hash table: SORT BY key with limit (4 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: Check consistency of different data types after a reload (975 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: BLPOP: with single empty list argument (2 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (1 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (2 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: BLPOP: with non-integer timeout (2 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (2 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (1 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (2 ms) [ok]: Hash table: SORT BY hash field (17 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (5 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (8 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (4 ms) [ok]: ZLEXCOUNT advanced - skiplist (3 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (7 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (10 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (6 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (16 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (1 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (1 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (1586 ms) [ok]: EXEC and script timeout (404 ms) [ok]: Hash ziplist of various encodings (95 ms) [ok]: Hash ziplist of various encodings - sanitize dump (4 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: Same dataset digest if saving/reloading as AOF? (293 ms) [7/91 done]: unit/type/hash (6 seconds) Testing unit/quit [ok]: Empty stream with no lastid can be rewrite into AOF correctly (244 ms) [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (249 ms) [8/91 done]: unit/quit (0 seconds) Testing unit/aofrw [9/91 done]: unit/type/stream-cgroups (6 seconds) Testing unit/acl [ok]: SDIFF fuzzing (5196 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (2 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (1 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (8 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: SRANDMEMBER - intset (11 ms) [ok]: SPOP integer from listpack set (2 ms) [ok]: SPOP with - listpack (5 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (1 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (1 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: SPOP with - intset (7 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (1 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: SPOP with - hashtable (7 ms) [ok]: By default, only default user is able to subscribe to any channel (2 ms) [ok]: Redict should actively expire keys incrementally (604 ms) [ok]: By default, only default user is able to subscribe to any shard channel (2 ms) [ok]: By default, only default user is able to subscribe to any pattern (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (5 ms) [ok]: SPOP using integers with Knuth's algorithm (1 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: SPOP new implementation: code path #1 intset (5 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: SPOP new implementation: code path #2 intset (4 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (2 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: SPOP new implementation: code path #3 intset (5 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (3 ms) [ok]: SPOP new implementation: code path #1 listpack (4 ms) [ok]: blocked command gets rejected when reprocessed after permission change (3 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: SPOP new implementation: code path #2 listpack (4 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: SPOP new implementation: code path #3 listpack (4 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (2 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (4 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (17 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (7 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (2 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACLLOG - zero max length is correctly handled (2 ms) [ok]: ACL LOG entries are limited to a maximum amount (3 ms) [ok]: ACL LOG entries are still present on update of max len config (2 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (0 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (6 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (89 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: ACL-Metrics invalid command accesses (4 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: ACL-Metrics invalid channels accesses (4 ms) [ok]: SRANDMEMBER with - listpack (33 ms) [ok]: SRANDMEMBER with - intset (26 ms) [ok]: SRANDMEMBER with - hashtable (31 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL LOAD only disconnects affected clients (2 ms) [ok]: SRANDMEMBER histogram distribution - listpack (105 ms) [ok]: ACL LOAD disconnects clients of deleted users (2 ms) [ok]: ACL load and save (48 ms) [ok]: just EXEC and script timeout (404 ms) [ok]: exec with write commands and state change (1 ms) [ok]: BLPOP: timeout (1061 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: exec with read commands and stale replica state change (7 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (2 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: ACL load and save with restricted channels (33 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: SRANDMEMBER histogram distribution - intset (109 ms) [ok]: MULTI propagation of PUBLISH (88 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (110 ms) [ok]: Default user has access to all channels irrespective of flag (0 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2278 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: XRANGE exclusive ranges (5 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Redict should lazy expire keys (1003 ms) [ok]: MULTI with BGREWRITEAOF (262 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: MULTI with config set appendonly (236 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (3 ms) [ok]: Test loading duplicate users in config on startup (13 ms) [ok]: BRPOP: timeout (1072 ms) [ok]: BRPOP: arguments are empty (3 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_LEFT: second argument is not a list (2 ms) [ok]: MULTI with FLUSHALL and AOF (8 ms) [10/91 done]: unit/multi (5 seconds) Testing unit/acl-v2 [ok]: Test basic multiple selectors (2 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (2 ms) [ok]: Test separate read permission (1 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format (0 ms) [ok]: Validate key permissions format - empty and omitted pattern (2 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (2 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (3 ms) [ok]: Existence test commands are not marked as access (0 ms) [ok]: Intersection cardinaltiy commands are access commands (2 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (2 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: ACL from config file and config rewrite (209 ms) [11/91 done]: unit/acl (2 seconds) Testing unit/latency-monitor [ok]: For unauthenticated clients output buffer is limited (7653 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1003 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2172 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (2 ms) [ok]: 5 keys in, 5 keys out (2 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (1 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: AUTH fails when binary password is wrong (1 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [12/91 done]: unit/acl-v2 (0 seconds) Testing integration/block-repl [ok]: SETNX against expired volatile key (3118 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (1 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: GETDEL propagate as DEL command to replica (64 ms) [ok]: XREAD with non empty second stream (1699 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (0 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (21 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: Blocking XREAD will not reply with an empty array (100 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD last element from non-empty stream (2 ms) [ok]: XREAD last element from empty stream (0 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (1 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: XREAD last element with count > 1 (1 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (2 ms) [ok]: XREAD + multiple XADD inside transaction (3 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (2 ms) [ok]: BLMPOP_LEFT: timeout (1072 ms) [ok]: BLMPOP_LEFT: arguments are empty (104 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (2 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (2 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: {standalone} SCAN regression test for issue #4906 (7888 ms) [ok]: SETBIT fuzzing (625 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (2 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (2 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (31 ms) [ok]: MASTERAUTH test with binary password (947 ms) [13/91 done]: unit/auth (9 seconds) Testing integration/replication [ok]: Big Hash table: SORT BY key (801 ms) [ok]: LTRIM stress testing - quicklist (9340 ms) [ok]: Big Hash table: SORT BY key with limit (29 ms) [ok]: First server should have role slave after SLAVEOF (1003 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (1 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1593 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: BLMPOP_RIGHT: timeout (1071 ms) [ok]: BLMPOP_RIGHT: arguments are empty (3 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (9281 ms) [ok]: APPEND fuzzing (347 ms) [ok]: FLUSHDB (74 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (14 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: BLMPOP propagate as pop with count command to replica (298 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (44 ms) [ok]: Big Hash table: SORT BY hash field (817 ms) [ok]: LINSERT - quicklist (45 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (4 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (1 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (19 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (1 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: LINDEX consistency test - listpack (73 ms) [ok]: GETRANGE fuzzing (1286 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (1 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (1 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (1 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: SORT speed, 100 element list BY key, 100 times (43 ms) [ok]: LINDEX random access - listpack (54 ms) [14/91 done]: unit/type/string (10 seconds) Testing integration/replication-2 [ok]: SORT speed, 100 element list BY hash field, 100 times (46 ms) [ok]: SORT speed, 100 element list directly, 100 times (22 ms) [ok]: SORT speed, 100 element list BY , 100 times (18 ms) [ok]: SETRANGE with huge offset (4 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (137 ms) [ok]: SORT STORE quicklist with the right options (72 ms) [ok]: ZDIFF fuzzing - skiplist (5070 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: ZMPOP propagate as pop with count command to replica (24 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: LINDEX consistency test - listpack (168 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2501 ms) [ok]: First server should have role slave after SLAVEOF (104 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: Don't rehash if redict has child process (441 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: LINDEX random access - listpack (120 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (96 ms) [ok]: Process title set as expected (2 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: BZMPOP readraw in RESP3 (199 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (2 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (19 ms) [ok]: XDEL fuzz test (2427 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (282 ms) [ok]: LINDEX consistency test - quicklist (85 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (197 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: LINDEX random access - quicklist (60 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (307 ms) [ok]: {cluster} SCAN basic (88 ms) [ok]: BZMPOP readraw in RESP2 (199 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: {cluster} SCAN COUNT (100 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (203 ms) [ok]: Test latency events logging (3403 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: {cluster} SCAN MATCH (80 ms) [ok]: ZUNIONSTORE result is sorted (140 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (1 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (31 ms) [ok]: ZMSCORE - listpack (32 ms) [ok]: LINDEX consistency test - quicklist (175 ms) [ok]: {cluster} SCAN TYPE (120 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (59 ms) [ok]: {cluster} SCAN unknown type (80 ms) [ok]: ZSET sorting stresser - listpack (51 ms) [ok]: LINDEX random access - quicklist (109 ms) [ok]: {cluster} SCAN with expired keys (89 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (88 ms) [ok]: {cluster} SSCAN with encoding intset (2 ms) [ok]: {cluster} SSCAN with encoding listpack (2 ms) [ok]: {cluster} SSCAN with encoding hashtable (5 ms) [ok]: {cluster} HSCAN with encoding listpack (2 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (244 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (1 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: {cluster} HSCAN with encoding hashtable (94 ms) [ok]: {cluster} ZSCAN with encoding listpack (3 ms) [ok]: RPOPLPUSH base case - quicklist (44 ms) [ok]: LMOVE left left base case - quicklist (48 ms) [ok]: {cluster} ZSCAN with encoding skiplist (81 ms) [ok]: {cluster} SCAN guarantees check under write load (23 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with NOVALUES (0 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: LMOVE left right base case - quicklist (44 ms) [ok]: LMOVE right left base case - quicklist (48 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (105 ms) [ok]: LMOVE right right base case - quicklist (48 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (48 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (44 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (44 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (88 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (92 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (88 ms) [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (0 ms) [ok]: sort_ro by in cluster mode (1 ms) [ok]: sort_ro get in cluster mode (1 ms) [15/91 done]: unit/sort (13 seconds) Testing integration/replication-3 [ok]: LMOVE right left with quicklist source and existing target quicklist (92 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (88 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (48 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (44 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (44 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (44 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (48 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (48 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (48 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (48 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (44 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (54 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (1 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (91 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (42 ms) [ok]: Redict should not propagate the read command on lazy expire (94 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2820 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: Mass RPOP/LPOP - listpack (106 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: LMPOP single existing list - quicklist (135 ms) [ok]: LMPOP multiple existing lists - quicklist (180 ms) [ok]: LMPOP single existing list - listpack (4 ms) [ok]: LMPOP multiple existing lists - listpack (3 ms) [ok]: LMPOP propagate as pop with count command to replica (59 ms) [ok]: LRANGE basics - quicklist (46 ms) [ok]: LRANGE inverted indexes - quicklist (44 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (48 ms) [ok]: LRANGE out of range negative end index - quicklist (44 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (2 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (2902 ms) [ok]: LTRIM basics - quicklist (535 ms) [ok]: LTRIM out of range negative end index - quicklist (91 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (260 ms) [ok]: LSET - quicklist (48 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (23 ms) [ok]: LTRIM out of range negative end index - listpack (4 ms) [ok]: LSET - listpack (2 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (1 ms) [ok]: LSET against non list value (0 ms) [ok]: Redict can trigger resizing (1792 ms) [ok]: LREM remove all the occurrences - quicklist (45 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (42 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (43 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: BLPOP/BLMOVE should increase dirty (3 ms) [ok]: client unblock tests (7 ms) [ok]: client unblock tests (104 ms) [ok]: List listpack -> quicklist encoding conversion (4 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (403 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (37 ms) [ok]: List listpack -> quicklist encoding conversion (190 ms) [ok]: MIGRATE cached connections are released after some time (15002 ms) [ok]: List quicklist -> listpack encoding conversion (228 ms) [ok]: Redict can rewind and trigger smaller slot resizing (673 ms) [ok]: MIGRATE is able to migrate a key between two instances (224 ms) [ok]: List encoding conversion when RDB loading (155 ms) [ok]: Redict can resize empty dict (21 ms) [ok]: MIGRATE is able to copy a key between two instances (227 ms) [ok]: List invalid list-max-listpack-size config (88 ms) [16/91 done]: unit/other (15 seconds) Testing integration/replication-4 [ok]: List of various encodings (98 ms) [ok]: List of various encodings - sanitize dump (5 ms) [ok]: Unblock fairness is kept while pipelining (5 ms) [ok]: Unblock fairness is kept during nested unblock (7 ms) [ok]: Blocking command accounted only once in commandstats (6 ms) [ok]: Blocking command accounted only once in commandstats after timeout (2 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (220 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (95 ms) [ok]: First server should have role slave after SLAVEOF (2 ms) [17/91 done]: unit/type/list (16 seconds) Testing integration/replication-psync [ok]: MIGRATE propagates TTL correctly (228 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (1136 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (1227 ms) [18/91 done]: unit/expire (17 seconds) Testing integration/replication-buffer [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (82 ms) [ok]: MASTER and SLAVE consistency with expire (4851 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (81 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1003 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: LTRIM stress testing - listpack (9266 ms) [19/91 done]: unit/type/list-2 (19 seconds) Testing integration/shutdown [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (7449 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (1 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [20/91 done]: unit/latency-monitor (11 seconds) Testing integration/aof [ok]: Detect write load to master (1002 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (12678 ms) [ok]: SMOVE basics - from regular set to intset (4 ms) [ok]: SMOVE basics - from intset to regular set (3 ms) [ok]: SMOVE non existing key (2 ms) [ok]: SMOVE non existing src set (3 ms) [ok]: SMOVE from regular set to non existing destination set (3 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (1 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (3 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: XRANGE fuzzing (8452 ms) [ok]: XREVRANGE regression test for issue #5006 (2 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (2 ms) [ok]: XADD streamID edge (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: ZSCORE - skiplist (19 ms) [ok]: ZMSCORE - skiplist (19 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (33 ms) [ok]: XTRIM with MAXLEN option basic test (114 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: ZSET sorting stresser - skiplist (29 ms) [ok]: XADD with LIMIT consecutive calls (18 ms) [ok]: XTRIM with ~ is limited (13 ms) [ok]: XTRIM without ~ is not limited (16 ms) [ok]: XTRIM without ~ and with LIMIT (14 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (2 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (1 ms) [ok]: All replicas share one global replication buffer (83 ms) [ok]: Replication buffer will become smaller when no replica uses (5 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9920 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (18 ms) [ok]: Bad format: Server should have logged an error (2 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: XADD with MINID > lastid can propagate correctly (17 ms) [ok]: Short read: Server should have logged an error (2 ms) [ok]: Short read: Utility should confirm the AOF is not valid (7 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (6 ms) [ok]: Short read: Utility should be able to fix the AOF (8 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (13 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (19 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: {cluster} SCAN regression test for issue #4906 (8383 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (40 ms) [ok]: XADD with ~ MINID can propagate correctly (20 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [21/91 done]: unit/scan (21 seconds) Testing integration/aof-race [ok]: Shutting down master waits for replica to catch up (sigterm) (2142 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (18 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (18 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (2 ms) [ok]: Redict should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (2 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (1 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (2 ms) [ok]: Test replication with parallel clients writing in different DBs (5316 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (2 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (8074 ms) [22/91 done]: integration/aof-race (1 seconds) Testing integration/aof-multi-part [23/91 done]: integration/replication-2 (12 seconds) Testing integration/rdb [ok]: intsets implementation stress testing (2472 ms) [ok]: Multi Part AOF can't load data when some file missing (118 ms) [24/91 done]: unit/type/set (22 seconds) Testing integration/corrupt-dump [ok]: test old version rdb file (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (116 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (2363 ms) [ok]: Empty stream can be rewrite into AOF correctly (146 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (116 ms) [ok]: corrupt payload: #7445 - with sanitize (234 ms) [ok]: RDB encoding loading test (14 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (2 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (116 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (221 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (257 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (115 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (227 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (115 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1269 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (316 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (115 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (21 ms) [ok]: corrupt payload: invalid zlbytes header (231 ms) [25/91 done]: unit/type/stream (22 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (118 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (118 ms) [ok]: corrupt payload: valid zipped hash header, dup records (226 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (118 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2044 ms) [ok]: Test RDB stream encoding (151 ms) [ok]: Test RDB stream encoding - sanitize dump (30 ms) [ok]: corrupt payload: quicklist big ziplist prev len (224 ms) [ok]: Multi Part AOF can start when no aof and no manifest (154 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: BLMOVE (left, right) replication, list exists (1003 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (2 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (187 ms) [ok]: corrupt payload: quicklist small ziplist prev len (228 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (243 ms) [ok]: corrupt payload: quicklist ziplist wrong count (236 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (967 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: corrupt payload: #3080 - quicklist (227 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (289 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (17617 ms) [ok]: Test FLUSHALL aborts bgsave (482 ms) [ok]: corrupt payload: quicklist with empty ziplist (229 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (231 ms) [ok]: bgsave resets the change counter (203 ms) [ok]: Slave is able to evict keys created in writable slaves (6003 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (227 ms) [ok]: BLMOVE (right, left) replication, list exists (1006 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (4 ms) [ok]: Writable replica doesn't return expired keys (104 ms) [ok]: PFCOUNT updates cache on readonly replica (2 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (102 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (226 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble no) (412 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1995 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1010 ms) [ok]: corrupt payload: #3080 - ziplist (225 ms) [ok]: BZPOPMIN with same key multiple times should work (103 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (122 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (465 ms) [26/91 done]: integration/replication-3 (12 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: corrupt payload: load corrupted rdb with empty keys (240 ms) [ok]: Shutting down master waits for replica timeout (2115 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: BLMOVE (right, right) replication, list exists (1005 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (241 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble yes) (925 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: BLPOP followed by role change, issue #2473 (206 ms) [ok]: corrupt payload: listpack invalid size header (225 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6442 ms) [ok]: corrupt payload: listpack too long entry len (141 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (256 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1006 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (3 ms) [ok]: BZMPOP_MIN with variadic ZADD (6 ms) [ok]: client freed during loading (1577 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3735 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: listpack very long entry len (141 ms) [ok]: Second server should have role master at first (1 ms) [ok]: SLAVEOF should start with link status "down" (2 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (294 ms) [ok]: Sync should have transferred keys from master (1 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: corrupt payload: listpack too long entry prev len (227 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (126 ms) [ok]: FLUSHDB / FLUSHALL should replicate (107 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: stream with duplicate consumers (238 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: Slave should be able to synchronize with the master (240 ms) [ok]: Detect write load to master (0 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: Shutting down master waits for replica then fails (1294 ms) [ok]: corrupt payload: hash ziplist with duplicate records (224 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [ok]: MIGRATE can correctly transfer large values (10267 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict1) (306 ms) [ok]: Test RDB load info (835 ms) [29/91 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/logging [ok]: corrupt payload: hash listpack with duplicate records (224 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (17 ms) [ok]: Replication of an expired key does not delete the expired key (518 ms) [ok]: script won't load anymore if it's in rdb (1 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (138 ms) [ok]: MIGRATE can correctly transfer hashes (226 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict2) (228 ms) [ok]: Shutting down master waits for replica then aborted (527 ms) [30/91 done]: integration/shutdown (8 seconds) Testing integration/psync2 [ok]: Crash report generated on SIGABRT (105 ms) [ok]: BZMPOP propagate as pop with count command to replica (266 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: Crash report generated on DEBUG SEGFAULT (3 ms) [ok]: corrupt payload: hash ziplist uneven record count (235 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (1104 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: Stacktraces generated on SIGALRM (104 ms) [ok]: corrupt payload: hash duplicate records (229 ms) [31/91 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: failed bgsave prevents writes (403 ms) [ok]: MIGRATE timeout actually works (640 ms) [ok]: corrupt payload: hash empty zipmap (232 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [32/91 done]: integration/rdb (5 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (140 ms) [ok]: MIGRATE can migrate multiple keys at once (219 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (647 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (151 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (225 ms) [ok]: AOF fsync always barrier issue (6528 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (231 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redict starts from empty (288 ms) [ok]: ZSET skiplist order consistency when elements are moved (1139 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (1 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: ZRANDMEMBER - listpack (8 ms) [ok]: ZRANDMEMBER - skiplist (8 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (224 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (233 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3197 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redict starts from empty (250 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (230 ms) [ok]: ZRANDMEMBER with - skiplist (294 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: Unknown command: Server should have logged an error (3 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (232 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8645 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (231 ms) [33/91 done]: unit/dump (28 seconds) Testing integration/psync2-master-restart [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (103 ms) [ok]: corrupt payload: fuzzer findings - hash crash (223 ms) [ok]: ZRANDMEMBER with - listpack (295 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (14 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (6 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: PSYNC2 #3899 regression: setup (1007 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [34/91 done]: unit/type/zset (29 seconds) Testing integration/failover [ok]: PSYNC2 pingoff: setup (1005 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (229 ms) [ok]: AOF enable will create manifest file (649 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (225 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: setup replication for following tests (103 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (232 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1167 ms) [35/91 done]: integration/replication-buffer (12 seconds) Testing integration/redict-cli [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: corrupt payload: fuzzer findings - empty intset (228 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (231 ms) [ok]: Interactive CLI: Multi-bulk reply (63 ms) [ok]: Generate timestamp annotations in AOF (444 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (226 ms) [ok]: Successfully load AOF which has timestamp annotations inside (0 ms) [ok]: failover command to specific replica works (946 ms) [ok]: Interactive CLI: Parsing quotes (431 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (225 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (227 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (234 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1806 ms) [ok]: Interactive CLI: Subscribed mode (599 ms) [ok]: failover command to any replica works (737 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1172 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (238 ms) [ok]: Truncate AOF to specific timestamp (732 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (144 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (414 ms) [ok]: Non-interactive TTY CLI: Status reply (4 ms) [ok]: Non-interactive TTY CLI: Integer reply (3 ms) [ok]: Non-interactive TTY CLI: Bulk reply (3 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (3 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (6 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (6 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (20 ms) [ok]: Non-interactive non-TTY CLI: Status reply (4 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: failover to a replica with force works (438 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (237 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (55 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (6 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (13 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (18 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (153 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (787 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (232 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (145 ms) [ok]: failover with timeout aborts if replica never catches up (555 ms) [ok]: failovers can be aborted (32 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (234 ms) [ok]: AOF enable/disable auto gc (441 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (139 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (241 ms) [ok]: failover aborts if target rejects sync request (536 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (224 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (10139 ms) [ok]: AOF can produce consecutive sequence number after reload (675 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (228 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (141 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (377 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (230 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2390 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (234 ms) [36/91 done]: integration/failover (4 seconds) Testing integration/redict-benchmark [ok]: EVAL can process writes from AOF in read-only replicas (249 ms) [ok]: Test redict-check-aof for old style resp AOF (8 ms) [ok]: Test redict-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: Test redict-check-aof for old style rdb-preamble AOF (8 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Test redict-check-aof for Multi Part AOF with resp AOF base (7 ms) [ok]: corrupt payload: fuzzer findings - huge string (230 ms) [ok]: Test redict-check-aof for Multi Part AOF with rdb-preamble AOF base (12 ms) [ok]: Test redict-check-aof for Multi Part AOF contains a format error (8 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in fix mode (14 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (8 ms) [ok]: benchmark: set,get (7 ms) [ok]: benchmark: connecting using URI set,get (5 ms) [ok]: benchmark: connecting using URI with authentication set,get (5 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5007 ms) [ok]: benchmark: full test suite (118 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (224 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (145 ms) [ok]: AOF will trigger limit when AOFRW fails many times (1002 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (2295 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7994 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (232 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (510 ms) [ok]: benchmark: multi-thread set,get (512 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (145 ms) [37/91 done]: integration/aof (15 seconds) Testing integration/dismiss-mem [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [ok]: benchmark: pipelined full set,get (140 ms) [ok]: benchmark: arbitrary command (8 ms) [ok]: benchmark: keyspace length (86 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (4 ms) [ok]: benchmark: read last argument from stdin (8 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (225 ms) [38/91 done]: integration/block-repl (26 seconds) Testing unit/pubsub [39/91 done]: integration/redict-benchmark (2 seconds) Testing unit/pubsubshard [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Pub/Sub PING on RESP2 (2 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (3 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (2 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (3 ms) [ok]: SUBSCRIBE to one channel more than once (2 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (3 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (2 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (2 ms) [ok]: Make the old master a replica of the new one and check conditions (1005 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (3 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (226 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (2 ms) [ok]: PubSub messages with CLIENT REPLY OFF (95 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (2 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (45 ms) [ok]: PubSubShard with CLIENT REPLY OFF (91 ms) [ok]: Keyspace notifications: we receive keyevent notifications (48 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (2 ms) [ok]: Keyspace notifications: general events test (2 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (2 ms) [ok]: Keyspace notifications: zset events test (2 ms) [ok]: Keyspace notifications: hash events test (2 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: corrupt payload: fuzzer findings - empty zset (228 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: Dumping an RDB - functions only: no (3751 ms) [ok]: Keyspace notifications: expired events (background expire) (156 ms) [ok]: Keyspace notifications: evicted events (2 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (2 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (2 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (3 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (239 ms) [40/91 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (2 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (241 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (202 ms) [ok]: SLOWLOG - zero max length is correctly handled (16 ms) [ok]: SLOWLOG - max entries is correctly handled (23 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (4 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [ok]: Detect write load to master (1002 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (240 ms) [ok]: dismiss all data types memory (1335 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (2 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (5 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1860 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (236 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (204 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (151 ms) [41/91 done]: unit/pubsubshard (1 seconds) Testing unit/scripting [ok]: Redis compatibility global exists (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (1 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: Dumping an RDB - functions only: yes (1115 ms) [ok]: EVAL - is Lua able to call Redict API? (2 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (142 ms) [ok]: EVAL - Redict integer -> Lua type conversion (4 ms) [ok]: EVAL - Lua number -> Redict integer conversion (1 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (6 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (3 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [42/91 done]: integration/psync2-master-restart (8 seconds) Testing unit/functions [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: SLOWLOG - can clean older entries (202 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Scan mode (103 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (1 ms) [ok]: FUNCTION - test replace argument (1 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (1 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (2 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (1 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 27600) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (231 ms) [ok]: FUNCTION - test loading from rdb (79 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (243 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (3 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redict.sha1hex() implementation (0 ms) [ok]: FUNCTION - test debug reload different options (67 ms) [ok]: dismiss client output buffer (760 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (63 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (1 ms) [ok]: SLOWLOG - can be disabled (403 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [ok]: SLOWLOG - get all slow logs (3 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (5 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (231 ms) [ok]: dismiss client query buffer (154 ms) [43/91 done]: unit/slowlog (2 seconds) Testing unit/maxmemory [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (234 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (74 ms) [ok]: FUNCTION - test function kill (404 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2915 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (225 ms) [44/91 done]: integration/aof-multi-part (15 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - empty set listpack (233 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (1 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: FUNCTION - test script kill not working on function (403 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (479 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (2 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (4 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (223 ms) [45/91 done]: integration/corrupt-dump (16 seconds) Testing unit/introspection-2 [ok]: The microsecond part of the TIME command will not overflow (1 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (4 ms) [ok]: FUNCTION - test function wrong argument (1 ms) [ok]: dismiss replication backlog (1240 ms) [ok]: ziplist implementation: value encoding and backlink (9572 ms) [46/91 done]: integration/dismiss-mem (4 seconds) Testing unit/limits [ok]: Connect a replica to the master instance (102 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (912 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (1 ms) [ok]: Connecting as a replica (2115 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (68 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: EVAL does not leak in the Lua stack (1150 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Script return recursive object (202 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (471 ms) [ok]: Script check unpack with massive arguments (68 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (2 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (1 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (0 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3427 ms) [ok]: Check if maxclients works refusing connections (909 ms) [47/91 done]: unit/limits (1 seconds) Testing unit/obuf-limits [ok]: CONFIG SET client-output-buffer-limit (3 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (437 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2002 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: CLIENT command unhappy path coverage (2 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (373 ms) [ok]: CLIENT KILL close the client connection during bgsave (97 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (48 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redict.call from function load (0 ms) [ok]: LIBRARIES - redict.setresp from function load (0 ms) [ok]: LIBRARIES - redict.set_repl from function load (0 ms) [ok]: LIBRARIES - redict.acl_check_cmd from function load (1 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (1 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (47 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (44 ms) [ok]: MONITOR can log executed commands (2 ms) [ok]: MONITOR can log commands issued by the scripting engine (2 ms) [ok]: MONITOR can log commands issued by functions (2 ms) [ok]: MONITOR supports redacting command arguments (4 ms) [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: MONITOR log blocked command only once (4 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (1 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (1 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (1 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (87 ms) [ok]: Timedout script does not cause a false dead client (86 ms) [ok]: Timedout script link is still usable after Lua returns (140 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (381 ms) [ok]: Piping raw protocol (1552 ms) [ok]: Options -X with illegal argument (7 ms) [ok]: DUMP RESTORE with -x option (10 ms) [ok]: DUMP RESTORE with -X option (10 ms) [48/91 done]: integration/redict-cli (11 seconds) Testing unit/bitops [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (1 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: BITCOUNT against wrong type (1 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (1 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (1 ms) [ok]: BITCOUNT against test vector #4 (1 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (1 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (1 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (2 ms) [ok]: FUNCTION - redict version api (0 ms) [ok]: FUNCTION - legacy redis version is hard-coded to 7.2.4 (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (14 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (492 ms) [49/91 done]: unit/functions (4 seconds) Testing unit/bitfield [ok]: Timedout scripts and unblocked command (574 ms) [ok]: BITCOUNT fuzzing without start/end (363 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (1 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: CONFIG save params special case handled properly (972 ms) [ok]: CONFIG sanity (33 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (204 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (29 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3004 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (509 ms) [ok]: BITFIELD overflow detection fuzzing (388 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: CONFIG REWRITE sanity (308 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Replication of script multiple pushes to list with BLPOP (3 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [ok]: BITCOUNT fuzzing with start/end (686 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT with illegal arguments (1 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (1 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (1 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 54092) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: BITFIELD overflow wrap fuzzing (573 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (585 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: BITOP and fuzzing (411 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (2 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (1 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (910 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: CONFIG SET with multiple args (2 ms) [ok]: CONFIG SET rollback on set error (2 ms) [ok]: CONFIG SET rollback on apply error (4 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (6 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: redict-server command line arguments - error cases (77 ms) [ok]: BITOP or fuzzing (401 ms) [50/91 done]: unit/bitfield (2 seconds) Testing unit/geo [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (587 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (1 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (1 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (1 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: redict.set_repl() don't accept invalid values (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (1 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (1 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (4 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: redict-server command line arguments - allow passing option name and option value in the same arg (228 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: Using side effects is not a problem with command replication (2 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: BITOP xor fuzzing (309 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: BITOP NOT fuzzing (33 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (1 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: BITPOS against wrong type (1 ms) [ok]: BITPOS will illegal arguments (1 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (1 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (4 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (11 ms) [ok]: BITPOS bit=0 works with intervals (2 ms) [ok]: BITPOS bit=1 works with intervals (2 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (7 ms) [ok]: redict-server command line arguments - wrong usage that we support anyway (225 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9989 ms) [51/91 done]: integration/corrupt-dump-fuzzer (21 seconds) Testing unit/memefficiency [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (557 ms) [ok]: redict-server command line arguments - allow option value to use the `--` prefix (225 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2930 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (415 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: redict-server command line arguments - option name and option value in the same arg and `--` prefix (232 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (522 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (352 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: Memory efficiency with values in range 32 (581 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (1 ms) [ok]: Redis compatibility global exists (0 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (1 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (1 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (1 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (343 ms) [52/91 done]: unit/bitops (3 seconds) Testing unit/hyperloglog [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [53/91 done]: integration/psync2-pingoff (17 seconds) Testing unit/lazyfree [ok]: TOUCH alters the last access time of a key (3003 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (250 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (27 ms) [ok]: SCRIPTING FLUSH ASYNC (18 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (1 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redict.sha1hex() implementation (1 ms) [ok]: Replication: commands with many arguments (issue #1221) (16774 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (732 ms) [ok]: spopwithcount rewrite srem command (101 ms) [ok]: Memory efficiency with values in range 64 (594 ms) [ok]: redict-server command line arguments - save with empty input (1150 ms) [ok]: UNLINK can reclaim memory in background (334 ms) [ok]: redict-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (228 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: HyperLogLog self test passes (804 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (1 ms) [ok]: PFCOUNT returns approximated cardinality of set (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (359 ms) [ok]: Memory efficiency with values in range 128 (601 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (728 ms) [ok]: lazy free a stream with all types of metadata (128 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [54/91 done]: unit/lazyfree (1 seconds) Testing unit/wait [ok]: cannot modify protected configuration - local (8 ms) [ok]: Measures elapsed time os.clock() (1002 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (2 ms) [ok]: errors stats for GEOADD (1 ms) [ok]: command stats for EXPIRE (3 ms) [ok]: command stats for BRPOP (2 ms) [ok]: command stats for MULTI (5 ms) [ok]: command stats for scripts (3 ms) [ok]: COMMAND COUNT get total number of Redict commands (1 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (2 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (1 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (1 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (5 ms) [ok]: COMMAND LIST syntax error (2 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (4 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (1 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (1 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (1 ms) [55/91 done]: unit/introspection-2 (7 seconds) Testing unit/pause [ok]: Setup slave (102 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Memory efficiency with values in range 1024 (674 ms) [ok]: HyperLogLogs are promote from sparse to dense (720 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9620 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (60 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (726 ms) [ok]: EVAL does not leak in the Lua stack (547 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (335 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (102 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (2 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (3 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (2 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Test both active and passive expires are skipped during client pause (105 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1771 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (354 ms) [ok]: MGET: mget shouldn't be propagated in Lua (300 ms) [ok]: Test when replica paused, offset would not grow (3 ms) [ok]: Test replica offset would grow after unpause (2 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1053 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (813 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Slave should be able to synchronize with the master (466 ms) [ok]: Detect write load to master (0 ms) [56/91 done]: unit/pause (1 seconds) Testing unit/querybuf [ok]: Data divergence can happen under default conditions (4 ms) [ok]: Data divergence is allowed on writable replicas (3 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (201 ms) [ok]: config during loading (1460 ms) [57/91 done]: integration/replication-4 (30 seconds) Testing unit/tls [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (330 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redict namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: HyperLogLog sparse encoding stress test (1314 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [58/91 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: CONFIG REWRITE handles rename-command properly (352 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (2 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: Script return recursive object (202 ms) [ok]: Script check unpack with massive arguments (67 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (744 ms) [ok]: Memory efficiency with values in range 16384 (1960 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1104 ms) [59/91 done]: unit/memefficiency (4 seconds) Testing unit/oom-score-adj [ok]: CONFIG REWRITE handles alias config properly (703 ms) [60/91 done]: unit/introspection (10 seconds) Testing unit/shutdown [ok]: CONFIG SET oom-score-adj works as expected (15 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (2 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (1 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (535 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [61/91 done]: unit/oom-score-adj (0 seconds) Testing unit/networking [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (84 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (120 ms) [ok]: Timedout script does not cause a false dead client (83 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (14 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: Timedout script link is still usable after Lua returns (139 ms) [ok]: CONFIG SET port number (232 ms) [ok]: Temp rdb will be deleted in signal handle (86 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (477 ms) [ok]: Tracking gets notification of lazy expired keys (201 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (2 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: RDB save will be failed in shutdown (9 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (2 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (3 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (2 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (2 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (2 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (2 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: CONFIG SET bind address (232 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (125 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (15 ms) [ok]: Tracking invalidation message of eviction keys should be before response (5 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (3 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (21543 ms) [ok]: Tracking gets notification on tracking table key eviction (49 ms) [ok]: Invalidation message received for flushall (3 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Test ASYNC flushall (4 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (3 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (94 ms) [ok]: Timedout scripts and unblocked command (565 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (14 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (197 ms) [ok]: Tracking info is correct (8 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (3 ms) [ok]: Regression test for #11715 (3 ms) [ok]: RESP3 based basic invalidation with client reply off (3 ms) [ok]: RESP2 based basic invalidation with client reply off (46 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: maxmemory - policy volatile-random should only remove volatile keys. (547 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (203 ms) [ok]: CONFIG SET bind-source-addr (534 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (33 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: query buffer resized correctly (2268 ms) [ok]: query buffer resized correctly when not idle (32 ms) [ok]: client evicted due to large argv (124 ms) [63/91 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: client evicted due to large query buf (46 ms) [ok]: client evicted due to percentage of maxmemory (14 ms) [ok]: PSYNC2 #3899 regression: verify consistency (46 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: WAITAOF local copy before fsync (146 ms) [ok]: SORT adds integer field to list (1 ms) [ok]: client evicted due to large multi buf (81 ms) [ok]: Default bind address configuration handling (233 ms) [ok]: Protected mode works as expected (5 ms) [64/91 done]: unit/violations (0 seconds) Testing unit/replybufsize [ok]: WAITAOF local copy everysec (100 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Now use EVALSHA against the master, with both SHAs (1 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (496 ms) [ok]: WAITAOF local copy with appendfsync always (78 ms) [ok]: WAITAOF local wait and then stop aof (25 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [65/91 done]: unit/networking (2 seconds) Testing unit/cluster/announced-endpoints [ok]: client evicted due to watched key list (350 ms) [ok]: WAITAOF local if AOFRW was postponed (446 ms) [66/91 done]: integration/psync2-reg (22 seconds) Testing unit/cluster/misc [ok]: WAITAOF on demoted master gets unblocked with an error (2 ms) [ok]: verify reply buffer limits (655 ms) [67/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/cli [ok]: WAITAOF replica copy before fsync (155 ms) [ok]: Connect a replica to the master instance (124 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 83409) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: WAITAOF replica copy everysec (702 ms) [ok]: client evicted due to pubsub subscriptions (1811 ms) [ok]: client evicted due to tracking redirection (107 ms) [ok]: ziplist implementation: encoding stress testing (13195 ms) [68/91 done]: unit/type/list-3 (51 seconds) Testing unit/cluster/scripting [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: query buffer resized correctly with fat argv (2971 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: Lua scripts eviction does not generate many scripts (164 ms) [ok]: Lua scripts eviction is plain LRU (53 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (103 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1186 ms) [ok]: Test change cluster-announce-bus-port at runtime (203 ms) [ok]: Lua scripts eviction does not affect script load (214 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (2 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [70/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: Key lazy expires during key migration (15 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Create 3 node cluster (2097 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Coverage: Basic cluster commands (73 ms) [ok]: Perform a Resharding (124 ms) [ok]: Verify command got unblocked after resharding (2 ms) [ok]: Wait for cluster to be stable (13 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (5 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: no-writes shebang flag on replica (107 ms) [ok]: not enough good replicas (1 ms) [71/91 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/multi-slot-operations [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (3 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (1 ms) [72/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/slot-ownership [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: not enough good replicas state change during long script (831 ms) [ok]: allow-stale shebang flag (2 ms) [ok]: reject script do not cause a Lua stack leak (7 ms) [ok]: Consistent eval error reporting (14 ms) [ok]: LUA redict.error_reply API (1 ms) [ok]: LUA redict.error_reply API with empty string (1 ms) [ok]: LUA redict.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: Kill a cluster node and wait for fail state (1523 ms) [ok]: Verify command got unblocked after cluster failure (5 ms) [73/91 done]: unit/scripting (18 seconds) Testing unit/cluster/links [ok]: WAITAOF replica copy everysec with slow AOFRW (2243 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Set cluster hostnames and verify they are propagated (125 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (543 ms) [ok]: Set cluster human announced nodename and let it propagate (151 ms) [ok]: Client output buffer hard limit is enforced (15468 ms) [ok]: WAITAOF replica copy appendfsync always (101 ms) [ok]: Update hostnames and make sure they are all eventually propagated (224 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (213 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (211 ms) [ok]: WAITAOF replica copy if replica is blocked (670 ms) [ok]: client evicted due to client tracking prefixes (4525 ms) [ok]: client evicted due to output buf (11 ms) [ok]: client no-evict on (101 ms) [ok]: Continuous slots distribution (13 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (2 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (6 ms) [ok]: client no-evict off (45 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9599 ms) [ok]: avoid client eviction when client is freed by output buffer limit (161 ms) [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (297 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (998 ms) [ok]: WAITAOF on promoted replica (1 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (105 ms) [ok]: decrease maxmemory-clients causes client eviction (556 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: evict clients only until below limit (156 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (93 ms) [ok]: evict clients in right order (large to small) (188 ms) [ok]: client total memory grows during client no-evict (136 ms) [ok]: client total memory grows during maxmemory-clients disabled (136 ms) [77/91 done]: unit/client-eviction (10 seconds) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Functions are added to new node on redict-cli cluster add-node (3145 ms) [ok]: Human nodenames are visible in log messages (3538 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2010 ms) [78/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: Detect write load to master (1001 ms) [ok]: Each node has two links with each peer (6 ms) [ok]: Validate cluster links format (0 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4032 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 114481) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4867 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (1109 ms) [ok]: Test restart will keep hostname information (315 ms) [ok]: Test hostname validation (1 ms) [79/91 done]: unit/cluster/hostnames (8 seconds) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: WAITAOF replica isn't configured to do AOF (130 ms) [ok]: Verify that single primary marks replica as failed (3092 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (916 ms) [ok]: AOF rewrite during write load: RDB preamble=no (38934 ms) [ok]: WAITAOF master sends PING after last write (1209 ms) [ok]: Migrate the last slot away from a node using redict-cli (4324 ms) [ok]: Turning off AOF kills the background writing child if any (182 ms) [ok]: AOF rewrite of list with listpack encoding, string data (134 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (250 ms) [ok]: AOF rewrite of list with listpack encoding, int data (154 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (259 ms) [ok]: AOF rewrite of set with intset encoding, string data (170 ms) [ok]: WAITAOF master client didn't send any write command (1202 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (235 ms) [ok]: AOF rewrite of set with intset encoding, int data (151 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 145893) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (137 ms) [ok]: PSYNC2: --- CYCLE 6 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (176 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (248 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (163 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6439 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (319 ms) [ok]: redict-cli -4 --cluster create using 127.0.0.1 with cluster-port (1930 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (127 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (6034 ms) [ok]: No response for single command if client output buffer hard limit is enforced (128 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (290 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (106 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (359 ms) [ok]: AOF rewrite functions (138 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (1 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: redict-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1206 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (218 ms) [ok]: BGREWRITEAOF is refused if already in progress (13 ms) [80/91 done]: unit/aofrw (61 seconds) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1047 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (23 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (32 ms) [ok]: Obuf limit, KEYS stopped mid-run (81 ms) [81/91 done]: unit/obuf-limits (28 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3667 ms) [ok]: redict-cli -4 --cluster create using localhost with cluster-port (1935 ms) [ok]: GEOSEARCH fuzzy test - byradius (27587 ms) [ok]: Verify that multiple primaries mark replica as failed (6223 ms) [82/91 done]: unit/cluster/failure-marking (15 seconds) [ok]: redict-cli -4 --cluster add-node using localhost with cluster-port (1320 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (21818 ms) [83/91 done]: unit/cluster/cli (21 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2597 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 178500) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (4 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (316 ms) [ok]: Disconnect link when send buffer limit reached (13312 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1511 ms) [ok]: Link memory increases with publishes (623 ms) [84/91 done]: integration/psync2 (46 seconds) [ok]: setup replication for following tests (103 ms) [ok]: Link memory resets after publish messages flush (567 ms) [85/91 done]: unit/cluster/links (20 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (8014 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (765 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [86/91 done]: unit/wait (30 seconds) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9647 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (1002 ms) [ok]: GEOSEARCH fuzzy test - bybox (19893 ms) [ok]: GEOSEARCH box edges fuzzy test (53 ms) [87/91 done]: unit/geo (48 seconds) [ok]: Fuzzing dense/sparse encoding: Redict should always detect errors (45783 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (23544 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9728 ms) [ok]: Slave should be able to synchronize with the master (1846 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (147 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (6925 ms) [ok]: Slave should be able to synchronize with the master (809 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (2721 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1475 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [88/91 done]: unit/hyperloglog (61 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6472 ms) [ok]: Slave should be able to synchronize with the master (820 ms) [ok]: Detect write load to master (0 ms) [ok]: slave buffer are counted correctly (61395 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (8093 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (21138 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: replica buffer don't induce eviction (7928 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (270 ms) [ok]: client tracking don't cause eviction feedback loop (1380 ms) [ok]: propagation with eviction (96 ms) [ok]: propagation with eviction in MULTI (95 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/91 done]: unit/maxmemory (85 seconds) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9657 ms) [ok]: Slave should be able to synchronize with the master (815 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9855 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (162 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (25330 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (1 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (423 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (1 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6460 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (322 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (855 ms) [ok]: Busy script during async loading (855 ms) [ok]: Blocked commands and configs during async-loading (427 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 3166 to exit... Waiting for process 3166 to exit... Waiting for process 3166 to exit... Waiting for process 3166 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (8077 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9643 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9755 ms) [90/91 done]: integration/replication-psync (162 seconds) [ok]: diskless loading short read (32596 ms) [ok]: diskless no replicas drop during rdb pipe (7207 ms) [ok]: diskless slow replicas drop during rdb pipe (4253 ms) [ok]: diskless fast replicas drop during rdb pipe (6202 ms) [ok]: diskless all replicas drop during rdb pipe (1234 ms) [ok]: diskless timeout replicas drop during rdb pipe (6145 ms) [ok]: diskless replication child being killed is collected (1439 ms) [ok]: replication child dies when parent is killed - diskless: yes (1170 ms) [ok]: replication child dies when parent is killed - diskless: no (1363 ms) [ok]: diskless replication read pipe cleanup (929 ms) [ok]: replicaof right after disconnection (1832 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (920 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms) [ok]: Discard cache master before loading transferred RDB when full sync (105 ms) [ok]: replica can handle EINTR if use diskless load (852 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (146 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (97 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (55 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (105 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (112 ms) [91/91 done]: integration/replication (214 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (1 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (2 seconds) The End Execution time of different units: 0 seconds - unit/info-command 0 seconds - unit/printver 0 seconds - unit/type/incr 0 seconds - unit/protocol 1 seconds - unit/keyspace 3 seconds - unit/info 6 seconds - unit/type/hash 0 seconds - unit/quit 6 seconds - unit/type/stream-cgroups 5 seconds - unit/multi 2 seconds - unit/acl 0 seconds - unit/acl-v2 9 seconds - unit/auth 10 seconds - unit/type/string 13 seconds - unit/sort 15 seconds - unit/other 16 seconds - unit/type/list 17 seconds - unit/expire 19 seconds - unit/type/list-2 11 seconds - unit/latency-monitor 21 seconds - unit/scan 1 seconds - integration/aof-race 12 seconds - integration/replication-2 22 seconds - unit/type/set 22 seconds - unit/type/stream 12 seconds - integration/replication-3 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-ziplist-zset-on-load 8 seconds - integration/shutdown 1 seconds - integration/logging 5 seconds - integration/rdb 28 seconds - unit/dump 29 seconds - unit/type/zset 12 seconds - integration/replication-buffer 4 seconds - integration/failover 15 seconds - integration/aof 26 seconds - integration/block-repl 2 seconds - integration/redict-benchmark 1 seconds - unit/pubsub 1 seconds - unit/pubsubshard 8 seconds - integration/psync2-master-restart 2 seconds - unit/slowlog 15 seconds - integration/aof-multi-part 16 seconds - integration/corrupt-dump 4 seconds - integration/dismiss-mem 1 seconds - unit/limits 11 seconds - integration/redict-cli 4 seconds - unit/functions 2 seconds - unit/bitfield 21 seconds - integration/corrupt-dump-fuzzer 3 seconds - unit/bitops 17 seconds - integration/psync2-pingoff 1 seconds - unit/lazyfree 7 seconds - unit/introspection-2 1 seconds - unit/pause 30 seconds - integration/replication-4 1 seconds - unit/tls 4 seconds - unit/memefficiency 10 seconds - unit/introspection 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 2 seconds - unit/tracking 0 seconds - unit/violations 2 seconds - unit/networking 22 seconds - integration/psync2-reg 1 seconds - unit/replybufsize 51 seconds - unit/type/list-3 6 seconds - unit/querybuf 3 seconds - unit/cluster/announced-endpoints 4 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 18 seconds - unit/scripting 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 10 seconds - unit/client-eviction 6 seconds - unit/cluster/human-announced-nodename 8 seconds - unit/cluster/hostnames 61 seconds - unit/aofrw 28 seconds - unit/obuf-limits 15 seconds - unit/cluster/failure-marking 21 seconds - unit/cluster/cli 46 seconds - integration/psync2 20 seconds - unit/cluster/links 30 seconds - unit/wait 48 seconds - unit/geo 61 seconds - unit/hyperloglog 85 seconds - unit/maxmemory 162 seconds - integration/replication-psync 214 seconds - integration/replication 0 seconds - list-large-memory 1 seconds - set-large-memory 0 seconds - bitops-large-memory 2 seconds - defrag 2 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict: Entering fakeroot... make -C src install make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' INSTALL redict-sentinel INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redict-server INSTALL redict-benchmark INSTALL redict-cli INSTALL ../redict.conf INSTALL ../sentinel.conf make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict-benchmark*: Running split function benchmark... 'usr/bin/redict-benchmark' -> '/home/buildozer/aports/community/redict/pkg/redict-benchmark/usr/bin/redict-benchmark' >>> redict-benchmark*: Preparing subpackage redict-benchmark... >>> redict-benchmark*: Stripping binaries >>> redict-benchmark*: Running postcheck for redict-benchmark >>> redict-cli*: Running split function cli... 'usr/bin/redict-cli' -> '/home/buildozer/aports/community/redict/pkg/redict-cli/usr/bin/redict-cli' >>> redict-cli*: Preparing subpackage redict-cli... >>> redict-cli*: Stripping binaries >>> redict-cli*: Running postcheck for redict-cli >>> redict-compat*: Running split function compat... >>> redict-compat*: Preparing subpackage redict-compat... >>> redict-compat*: Script found. /bin/sh added as a dependency for redict-compat-7.3.3-r1.apk >>> redict-compat*: Adding .pre-install >>> redict-compat*: Running postcheck for redict-compat >>> redict-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/init.d' >>> redict-openrc*: Preparing subpackage redict-openrc... >>> redict-openrc*: Running postcheck for redict-openrc >>> redict*: Running postcheck for redict >>> redict*: Preparing package redict... >>> redict*: Stripping binaries >>> redict*: Script found. /bin/sh added as a dependency for redict-7.3.3-r1.apk >>> redict*: Adding .post-install >>> redict*: Adding .post-upgrade >>> redict*: Adding .pre-install libfakeroot internal error: payload not recognized! >>> redict-benchmark*: Scanning shared objects >>> redict-cli*: Scanning shared objects >>> redict-compat*: Scanning shared objects >>> redict-openrc*: Scanning shared objects >>> redict*: Scanning shared objects >>> redict-benchmark*: Tracing dependencies... so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-benchmark*: Package size: 290.1 KB >>> redict-benchmark*: Compressing data... >>> redict-benchmark*: Create checksum... >>> redict-benchmark*: Create redict-benchmark-7.3.3-r1.apk >>> redict-cli*: Tracing dependencies... so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-cli*: Package size: 618.3 KB >>> redict-cli*: Compressing data... >>> redict-cli*: Create checksum... >>> redict-cli*: Create redict-cli-7.3.3-r1.apk >>> redict-compat*: Tracing dependencies... !redis !valkey-compat /bin/sh redict-benchmark=7.3.3-r1 redict-cli=7.3.3-r1 redict=7.3.3-r1 >>> redict-compat*: Package size: 1.0 B >>> redict-compat*: Compressing data... >>> redict-compat*: Create checksum... >>> redict-compat*: Create redict-compat-7.3.3-r1.apk >>> redict-openrc*: Tracing dependencies... >>> redict-openrc*: Package size: 1.7 KB >>> redict-openrc*: Compressing data... >>> redict-openrc*: Create checksum... >>> redict-openrc*: Create redict-openrc-7.3.3-r1.apk >>> redict*: Tracing dependencies... /bin/sh so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict*: Package size: 3.3 MB >>> redict*: Compressing data... >>> redict*: Create checksum... >>> redict*: Create redict-7.3.3-r1.apk >>> redict: Build complete at Thu, 29 May 2025 22:06:25 +0000 elapsed time 0h 4m 37s >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Uninstalling dependencies... (1/8) Purging .makedepends-redict (20250529.220149) (2/8) Purging linux-headers (6.6-r1) (3/8) Purging openssl-dev (3.3.3-r0) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libproc2 (4.0.4-r2) (8/8) Purging libintl (0.22.5-r0) Executing busybox-1.37.0-r12.trigger OK: 245 MiB in 99 packages >>> redict: Updating the community/loongarch64 repository index... >>> redict: Signing the index...