>>> redict: Building community/redict 7.3.2-r0 (using abuild 3.14.1-r5) started Fri, 10 Jan 2025 16:06:10 +0000 >>> redict: Validating /home/buildozer/aports/community/redict/APKBUILD... >>> redict: Analyzing dependencies... >>> redict: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.12.6-r0) (2/8) Installing openssl-dev (3.3.2-r4) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.16-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redict (20250110.160611) Executing busybox-1.37.0-r10.trigger OK: 413 MiB in 112 packages >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Cleaning up tmpdir >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.2.tar.gz >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.2.tar.gz >>> redict: Checking sha512sums... redict-7.3.2.tar.gz: OK redict.conf.patch: OK sentinel.conf.patch: OK redict.initd: OK redict.confd: OK redict-sentinel.initd: OK redict.logrotate: OK >>> redict: Unpacking /var/cache/distfiles/edge/redict-7.3.2.tar.gz... >>> redict: redict.conf.patch patching file redict.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 489 (offset 67 lines). >>> redict: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). make -C src all make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep rm -rf redict-server redict-sentinel redict-cli redict-benchmark redict-check-rdb redict-check-aof *.o *.gcda *.gcno *.gcov redict.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redict-check-rdb.d redict-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redict-cli.d zmalloc.d release.d ae.d redictassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redict-benchmark.d adlist.d dict.d zmalloc.d redictassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDICT_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDICT_CFLAGS= >> .make-settings echo REDICT_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDICT_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -I../deps/hiredict -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredict linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredict cd hiredict && make static USE_SSL=1 MAKE linenoise MAKE lua cd linenoise && make cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2" MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" MAKE hdr_histogram make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic hiredict.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' ar rcs libhiredict.a alloc.o net.o hiredict.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredict_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redict-check-rdb.o CC redict-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redict-cli.o CC redictassert.o CC cli_common.o CC cli_commands.o CC redict-benchmark.o LINK redict-benchmark LINK redict-cli LINK redict-server INSTALL redict-sentinel INSTALL redict-check-rdb INSTALL redict-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' make -C src test make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep CC release.o LINK redict-server LINK redict-cli LINK redict-benchmark INSTALL redict-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 12112 Testing unit/printver [ready]: 12114 Testing unit/dump [ready]: 12113 Testing unit/auth [ready]: 12115 Testing unit/protocol [ready]: 12116 Testing unit/keyspace [ready]: 12117 Testing unit/scan [ready]: 12118 Testing unit/info [ready]: 12120 Testing unit/info-command [ready]: 12119 Testing unit/type/string [ready]: 12121 Testing unit/type/incr [ready]: 12122 Testing unit/type/list [ready]: 12123 Testing unit/type/list-2 [ready]: 12124 Testing unit/type/list-3 [ready]: 12126 Testing unit/type/set [ready]: 12125 Testing unit/type/zset [ready]: 12127 Testing unit/type/hash Testing Redict version 7.3.2 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: SET and GET an item (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: info command with at most one sub command (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: INCR against non existing key (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: DEL against a single item (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: Vararg DEL (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: packed node check compression with insert and pop (1 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: DBSIZE (0 ms) [ok]: packed node check compression combined with trim (0 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: packed node check compression with lset (0 ms) [ok]: KEYS with hashtag (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (2 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (0 ms) [ok]: DEL all keys (0 ms) [ok]: Check encoding - listpack (1 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: ZADD XX existing key - listpack (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: No negative zero (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (0 ms) [ok]: HRANDFIELD - listpack (4 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (7 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: SADD against non set (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: HRANDFIELD - hashtable (4 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: SADD a non-integer against a large intset (5 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: SADD an integer larger than 64 bits to a large intset (5 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (3 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms) [ok]: ZLEXCOUNT advanced - listpack (0 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: Handle an empty query (41 ms) [ok]: ZREMRANGEBYRANK basics - listpack (3 ms) [ok]: Very big payload in GET/SET (40 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (21 ms) [ok]: ZREMRANGEBYLEX basics - listpack (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: {standalone} SCAN basic (48 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (6 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: Negative multibulk length (43 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (92 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (47 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (0 ms) [1/91 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: {standalone} SCAN COUNT (52 ms) [2/91 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: HRANDFIELD with - hashtable (92 ms) [3/91 done]: unit/type/incr (0 seconds) Testing unit/sort [ok]: latencystats: disable/enable (2 ms) [ok]: Protocol desync regression test #1 (31 ms) [ok]: latencystats: configure percentiles (1 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (132 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (0 ms) [ok]: {standalone} SCAN MATCH (43 ms) [ok]: Protocol desync regression test #2 (30 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: Protocol desync regression test #3 (30 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: Check compression with recompress (47 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (1 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: test large number of args (21 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: {standalone} SCAN TYPE (64 ms) [ok]: HRANDFIELD with - listpack (104 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Set encoding after DEBUG RELOAD (73 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: SREM basics - $type (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: XADD wrong number of args (1 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: SREM basics - $type (6 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: XPENDING only group (0 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (0 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: {standalone} SCAN unknown type (44 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (2 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (5 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (22 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: SUNION with non existing keys - regular (5 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (0 ms) [ok]: XADD with MAXLEN option (55 ms) [ok]: Blocking XREAD: key type changed with SET (0 ms) [ok]: HSET/HLEN - Big hash creation (77 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (1 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: {standalone} SCAN with expired keys (50 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (38 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (3 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: MIGRATE is caching connections (224 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: XADD with MAXLEN option and the '=' argument (56 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (12 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: errorstats: limit errors will not increase indefinitely (147 ms) [ok]: HGET against the big hash (52 ms) [ok]: HGET against non existing key (1 ms) [ok]: HSET in update and insert mode (0 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (50 ms) [ok]: {standalone} SSCAN with encoding intset (1 ms) [ok]: {standalone} SSCAN with encoding listpack (1 ms) [ok]: plain node check compression with insert and pop (351 ms) [ok]: {standalone} SSCAN with encoding hashtable (3 ms) [ok]: {standalone} HSCAN with encoding listpack (1 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Quicklist: SORT BY hash field (8 ms) [ok]: XADD with MAXLEN option and the '~' argument (48 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: HMSET - big hash (51 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (1 ms) [ok]: Crash due to wrongly recompress after lrem (217 ms) [ok]: {standalone} HSCAN with encoding hashtable (70 ms) [ok]: {standalone} ZSCAN with encoding listpack (1 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: XADD with MINID option (56 ms) [ok]: XTRIM with MINID option (0 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (46 ms) [ok]: HMGET - big hash (51 ms) [ok]: HKEYS - small hash (1 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (0 ms) [ok]: plain node check compression combined with trim (133 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (44 ms) [ok]: {standalone} ZSCAN with encoding skiplist (62 ms) [ok]: HGETALL - big hash (26 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (1 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (1 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: {standalone} SCAN guarantees check under write load (13 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {standalone} SSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (0 ms) [ok]: {standalone} ZSCAN with PATTERN (1 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: HSTRLEN against the big hash (41 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (43 ms) [ok]: Hash fuzzing #1 - 10 fields (19 ms) [ok]: Hash fuzzing #2 - 10 fields (14 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: plain node check compression with lset (186 ms) [ok]: Test LPUSH and LPOP on plain nodes (2 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (0 ms) [ok]: Test LSET with packed / plain combinations (46 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: Test LSET with packed consist only one item (182 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (1 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (1 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: COPY basic usage for list - quicklist (43 ms) [ok]: COPY basic usage for list - listpack (0 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (9 ms) [ok]: COPY basic usage for listpack sorted set (0 ms) [ok]: COPY basic usage for skiplist sorted set (7 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: COPY basic usage for hashtable hash (9 ms) [ok]: COPY basic usage for stream (62 ms) [ok]: Test LSET with packed / plain combinations (181 ms) [ok]: Test LSET with packed is split in the middle (0 ms) [ok]: COPY basic usage for stream-cgroups (5 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (4 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Regression for pattern matching very long nested loops (2 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (0 ms) [5/91 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1096 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: RENAME can unblock XREADGROUP with data (0 ms) [ok]: Test LSET with packed consist only one item (173 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (0 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Coverage: HELP commands (2 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: SAVE - make sure there are all the types as values (2 ms) [ok]: Hash fuzzing #1 - 512 fields (853 ms) [ok]: MASTERAUTH test with binary password (906 ms) [ok]: LPOS basic usage - quicklist (42 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (92 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (1 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (1 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (0 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (0 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: BLPOP: single existing list - quicklist (47 ms) [ok]: FUZZ stresser with data model binary (386 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (2 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (2 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (0 ms) [ok]: It is possible to UNWATCH (0 ms) [ok]: UNWATCH when there is nothing watched works as expected (1 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (2 ms) [ok]: BLPOP: multiple existing lists - quicklist (90 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (2 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (44 ms) [ok]: Very big payload random access (1921 ms) [ok]: Hash fuzzing #2 - 512 fields (542 ms) [ok]: XCLAIM can claim PEL items from another consumer (602 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (87 ms) [ok]: stats: instantaneous metrics (1602 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: stats: debug metrics (112 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: BLMOVE left right - quicklist (43 ms) [ok]: FUZZ stresser with data model alpha (410 ms) [ok]: stats: client input and output buffer limit disconnections (59 ms) [ok]: clients: pubsub clients (1 ms) [ok]: clients: watching clients (5 ms) [ok]: Big Quicklist: SORT BY key (580 ms) [ok]: Big Quicklist: SORT BY key with limit (10 ms) [ok]: BLMOVE right left - quicklist (43 ms) [ok]: XADD mass insertion and XLEN (1830 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (0 ms) [ok]: BRPOPLPUSH - listpack (0 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (0 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (0 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (0 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (2 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (0 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (2 ms) [ok]: ZDIFF fuzzing - listpack (2504 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: XRANGE can be used to iterate the whole stream (297 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (1 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (2 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: FUZZ stresser with data model compr (375 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (3 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [7/91 done]: unit/info (3 seconds) Testing unit/quit [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: XCLAIM same consumer (200 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (1 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (1 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (0 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (1 ms) [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (0 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: SDIFF fuzzing (2401 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (0 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (4 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (4 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: SPOP with - listpack (1 ms) [ok]: SPOP with - intset (2 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (1 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (790 ms) [ok]: SPOP new implementation: code path #3 intset (1 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (832 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (1 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (32 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (11 ms) [ok]: Big Quicklist: SORT BY hash field (569 ms) [ok]: SRANDMEMBER with - intset (12 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: SRANDMEMBER with - hashtable (10 ms) [8/91 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: Hash ziplist of various encodings (89 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: BGSAVE (53 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: SRANDMEMBER histogram distribution - listpack (46 ms) [9/91 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: SRANDMEMBER histogram distribution - intset (47 ms) [ok]: Hash table: SORT BY key (9 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: Hash table: SORT BY hash field (9 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (47 ms) [ok]: WATCH will consider touched expired keys (1104 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (0 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: Connections start with the default user (1 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (0 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (0 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (0 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (0 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (1 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (0 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (0 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (67 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (1 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (0 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (8 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (3 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (0 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (0 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACLLOG - zero max length is correctly handled (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (1 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (602 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (100 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL LOAD only disconnects affected clients (1 ms) [ok]: ACL LOAD disconnects clients of deleted users (1 ms) [ok]: ACL load and save (1 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: Check consistency of different data types after a reload (434 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: BRPOPLPUSH timeout (1013 ms) [ok]: SWAPDB awakes blocked client (0 ms) [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XINFO FULL output (3 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (102 ms) [ok]: Same dataset digest if saving/reloading as AOF? (172 ms) [ok]: Default user has access to all channels irrespective of flag (0 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (53 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (201 ms) [ok]: Consumer seen-time and active-time (203 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [ok]: XREADGROUP with NOACK creates consumer (2 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (104 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Consumer group read counter and lag in empty streams (0 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: Consumer group lag with XDELs (5 ms) [ok]: Loading from legacy (Redict <= v6.2.x, rdb_ver < 10) persistence (0 ms) [ok]: Loading from legacy (Redict <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: MULTI and script timeout (402 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (102 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (103 ms) [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Test loading duplicate users in config on startup (9 ms) [ok]: EXEC and script timeout (404 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1906 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (3 ms) [ok]: XREADGROUP ACK would propagate entries-read (1 ms) [ok]: LTRIM stress testing - quicklist (4754 ms) [ok]: ACL from config file and config rewrite (211 ms) [10/91 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: Big Hash table: SORT BY key (573 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1002 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (0 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: MULTI-EXEC body and script timeout (402 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: Big Hash table: SORT BY key with limit (12 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (0 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (1 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format (0 ms) [ok]: Validate key permissions format - empty and omitted pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (0 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (0 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (103 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (0 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: PSETEX can set sub-second expires (101 ms) [11/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/latency-monitor [ok]: Test behavior of loading ACLs (6 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [12/91 done]: unit/acl-v2 (0 seconds) Testing integration/block-repl [ok]: SETNX against expired volatile key (2433 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (2 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (0 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: just EXEC and script timeout (402 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (0 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: GETDEL propagate as DEL command to replica (76 ms) [ok]: XREAD with non empty second stream (856 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (7 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: ZDIFF fuzzing - skiplist (2793 ms) [ok]: GETSET (set new value) (0 ms) [ok]: Blocking XREAD will not reply with an empty array (89 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: MSET base case (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: Big Hash table: SORT BY hash field (579 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (0 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (0 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (0 ms) [ok]: MULTI propagation of SCRIPT LOAD (100 ms) [ok]: SORT regression for issue #19, sorting floats (9 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (18 ms) [ok]: ZMPOP propagate as pop with count command to replica (62 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (19 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD last element from non-empty stream (0 ms) [ok]: XREAD last element from empty stream (1 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (0 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: XREAD last element with count > 1 (0 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (0 ms) [ok]: SORT speed, 100 element list directly, 100 times (11 ms) [ok]: SORT speed, 100 element list BY , 100 times (10 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SORT STORE quicklist with the right options (58 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2105 ms) [ok]: SETBIT fuzzing (232 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (0 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (199 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: BZMPOP readraw in RESP3 (200 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (0 ms) [ok]: {standalone} SCAN regression test for issue #4906 (5366 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (18 ms) [ok]: BLPOP: timeout (1075 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: BRPOP: with single empty list argument (0 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: MULTI with BGREWRITEAOF (208 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: Redict should actively expire keys incrementally (703 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (200 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (544 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: MULTI with config set appendonly (203 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: APPEND fuzzing (159 ms) [ok]: GETRANGE fuzzing (691 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: Extended SET EX option (1 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (1 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (0 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (0 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [ok]: FLUSHDB (49 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [ok]: ZUNIONSTORE result is sorted (112 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [13/91 done]: unit/type/string (7 seconds) Testing integration/replication [ok]: ZSCORE - listpack (17 ms) [ok]: ZMSCORE - listpack (18 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (21 ms) [14/91 done]: unit/multi (5 seconds) Testing integration/replication-2 [ok]: ZSET sorting stresser - listpack (25 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: XDEL fuzz test (1308 ms) [ok]: Don't rehash if redict has child process (311 ms) [ok]: BRPOP: timeout (1077 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (0 ms) [ok]: Redict should lazy expire keys (1002 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: Process title set as expected (1 ms) [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (0 ms) [ok]: sort_ro by in cluster mode (0 ms) [ok]: sort_ro get in cluster mode (0 ms) [15/91 done]: unit/sort (8 seconds) Testing integration/replication-3 [ok]: EXPIRE should not resurrect keys (issue #1026) (1001 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: {cluster} SCAN basic (49 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1605 ms) [ok]: {cluster} SCAN COUNT (54 ms) [ok]: BLMPOP_LEFT: timeout (1078 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (0 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (0 ms) [ok]: {cluster} SCAN MATCH (44 ms) [ok]: {cluster} SCAN TYPE (66 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (159 ms) [ok]: {cluster} SCAN unknown type (46 ms) [ok]: {cluster} SCAN with expired keys (51 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (52 ms) [ok]: {cluster} SSCAN with encoding intset (1 ms) [ok]: {cluster} SSCAN with encoding listpack (1 ms) [ok]: {cluster} SSCAN with encoding hashtable (3 ms) [ok]: {cluster} HSCAN with encoding listpack (1 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (219 ms) [ok]: {cluster} HSCAN with encoding hashtable (73 ms) [ok]: {cluster} ZSCAN with encoding listpack (1 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (19 ms) [ok]: {cluster} ZSCAN with encoding skiplist (64 ms) [ok]: {cluster} SCAN guarantees check under write load (14 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with NOVALUES (1 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (44 ms) [ok]: Test latency events logging (3401 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (5979 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (0 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (516 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8598 ms) [ok]: BLMPOP_RIGHT: timeout (1077 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: BLMPOP propagate as pop with count command to replica (198 ms) [ok]: LPUSHX, RPUSHX - generic (0 ms) [ok]: LPUSHX, RPUSHX - quicklist (46 ms) [ok]: LINSERT - quicklist (47 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (42 ms) [ok]: LINDEX random access - listpack (29 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2820 ms) [ok]: min-slaves-to-write is ignored by slaves (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (71 ms) [ok]: LINDEX consistency test - listpack (83 ms) [ok]: LINDEX random access - listpack (59 ms) [ok]: intsets implementation stress testing (934 ms) [16/91 done]: unit/type/set (10 seconds) Testing integration/replication-4 [ok]: LTRIM stress testing - listpack (5183 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (102 ms) [ok]: LINDEX consistency test - quicklist (33 ms) [ok]: LINDEX random access - quicklist (24 ms) [17/91 done]: unit/type/list-2 (10 seconds) Testing integration/replication-psync [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (48 ms) [ok]: LINDEX consistency test - quicklist (66 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: LINDEX random access - quicklist (46 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2008 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (91 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (47 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: LMOVE left left base case - quicklist (43 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (6 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (71 ms) [ok]: LMOVE left right base case - quicklist (44 ms) [ok]: LMOVE right left base case - quicklist (43 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (4 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (46 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (299 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (90 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (89 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (90 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (89 ms) [ok]: MASTER and SLAVE consistency with expire (2969 ms) [ok]: Redict can trigger resizing (1807 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (24 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (87 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (43 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (2675 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (44 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (0 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (43 ms) [18/91 done]: unit/latency-monitor (7 seconds) Testing integration/replication-buffer [ok]: LMOVE left left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (44 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (46 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (0 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (0 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (42 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (86 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (23 ms) [ok]: Redict can rewind and trigger smaller slot resizing (694 ms) [ok]: Mass RPOP/LPOP - listpack (44 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: Redict can resize empty dict (11 ms) [ok]: LMPOP single existing list - quicklist (129 ms) [ok]: XRANGE fuzzing (5101 ms) [ok]: XREVRANGE regression test for issue #5006 (0 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [19/91 done]: unit/other (11 seconds) Testing integration/shutdown [ok]: XTRIM with MAXLEN option basic test (53 ms) [ok]: XADD with LIMIT consecutive calls (6 ms) [ok]: XTRIM with ~ is limited (6 ms) [ok]: XTRIM without ~ is not limited (6 ms) [ok]: XTRIM without ~ and with LIMIT (6 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1001 ms) [ok]: ZSCORE - skiplist (15 ms) [ok]: ZMSCORE - skiplist (13 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (15 ms) [ok]: LMPOP multiple existing lists - quicklist (176 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: ZSET sorting stresser - skiplist (19 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: LMPOP propagate as pop with count command to replica (74 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (6 ms) [ok]: LRANGE basics - quicklist (43 ms) [ok]: LRANGE inverted indexes - quicklist (46 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: LRANGE out of range negative end index - quicklist (47 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: XADD with MINID > lastid can propagate correctly (7 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (7 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (7 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: LTRIM basics - quicklist (539 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (82 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: LTRIM out of range negative end index - quicklist (93 ms) [ok]: LSET - quicklist (46 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (5 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: XADD with ~ MINID can propagate correctly (6 ms) [ok]: {cluster} SCAN regression test for issue #4906 (4456 ms) [ok]: Redict should not propagate the read command on lazy expire (94 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (18 ms) [ok]: LREM remove all the occurrences - quicklist (45 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (42 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [20/91 done]: unit/scan (13 seconds) Testing integration/aof [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (45 ms) [ok]: LREM remove all the occurrences - listpack (0 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1180 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (7 ms) [ok]: List listpack -> quicklist encoding conversion (187 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (130 ms) [ok]: Short read: Server should start if load-truncated is yes (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (1 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (7 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (167 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (12 ms) [ok]: List quicklist -> listpack encoding conversion (230 ms) [ok]: List encoding conversion when RDB loading (2 ms) [ok]: List invalid list-max-listpack-size config (46 ms) [ok]: Short read + command: Server should start (0 ms) [ok]: List of various encodings (50 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (1 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (67 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1827 ms) [ok]: All replicas share one global replication buffer (44 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [21/91 done]: unit/type/list (14 seconds) Testing integration/aof-race [ok]: Bad format: Server should have logged an error (1 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (1 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (435 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (7 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: Short read: Utility should be able to fix the AOF (4 ms) [ok]: Empty stream can be rewrite into AOF correctly (103 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (0 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (103 ms) [22/91 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (109 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (4867 ms) [23/91 done]: integration/replication-2 (8 seconds) Testing integration/rdb [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (108 ms) [24/91 done]: unit/type/stream (15 seconds) Testing integration/corrupt-dump [ok]: test old version rdb file (1 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (108 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (112 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: RDB encoding loading test (4 ms) [ok]: corrupt payload: #7445 - with sanitize (224 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (122 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (109 ms) [ok]: Redict should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (218 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (109 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (110 ms) [ok]: MIGRATE cached connections are released after some time (15001 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: corrupt payload: invalid zlbytes header (223 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (109 ms) [ok]: Test replication with parallel clients writing in different DBs (5244 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (111 ms) [ok]: MIGRATE is able to migrate a key between two instances (214 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1726 ms) [ok]: corrupt payload: valid zipped hash header, dup records (214 ms) [ok]: Test RDB stream encoding (59 ms) [ok]: Test RDB stream encoding - sanitize dump (4 ms) [ok]: Multi Part AOF can start when no aof and no manifest (215 ms) [ok]: MIGRATE is able to copy a key between two instances (224 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: corrupt payload: quicklist big ziplist prev len (224 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (216 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (223 ms) [ok]: corrupt payload: quicklist small ziplist prev len (223 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1001 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (0 ms) [ok]: BZMPOP_MIN with variadic ZADD (0 ms) [ok]: Replication backlog size can outgrow the backlog limit config (862 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (216 ms) [ok]: MIGRATE propagates TTL correctly (223 ms) [ok]: corrupt payload: quicklist ziplist wrong count (224 ms) [ok]: Test FLUSHALL aborts bgsave (304 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (217 ms) [ok]: bgsave resets the change counter (103 ms) [ok]: corrupt payload: #3080 - quicklist (217 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (230 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (1214 ms) [ok]: Slave is able to detect timeout during handshake (1 ms) [ok]: corrupt payload: quicklist with empty ziplist (224 ms) [25/91 done]: unit/expire (16 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Multi Part AOF can load data from old version redict (rdb preamble no) (321 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (229 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (3 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (215 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: Set instance A as slave of B (100 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: BZMPOP propagate as pop with count command to replica (190 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble yes) (334 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6379 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1227 ms) [ok]: corrupt payload: #3080 - ziplist (216 ms) [ok]: Shutting down master waits for replica timeout (1817 ms) [ok]: client freed during loading (877 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (221 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (111 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (221 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (219 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8643 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: ZSET skiplist order consistency when elements are moved (539 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (5 ms) [ok]: ZRANDMEMBER - skiplist (5 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (114 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (455 ms) [26/91 done]: integration/replication-3 (10 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: corrupt payload: load corrupted rdb with empty keys (221 ms) [ok]: ZRANDMEMBER with - skiplist (158 ms) [ok]: RDB load zipmap hash: converts to listpack (0 ms) [ok]: Test RDB load info (521 ms) [ok]: ZRANDMEMBER with - listpack (156 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (8 ms) [ok]: corrupt payload: listpack invalid size header (215 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (4 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (0 ms) [27/91 done]: unit/type/zset (18 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict1) (125 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict2) (82 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: listpack too long entry len (141 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (0 ms) [ok]: corrupt payload: listpack very long entry len (122 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (625 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [28/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [29/91 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/logging [ok]: corrupt payload: listpack too long entry prev len (215 ms) [ok]: Shutting down master waits for replica then fails (1238 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2721 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (327 ms) [ok]: Crash report generated on SIGABRT (102 ms) [ok]: corrupt payload: stream with duplicate consumers (214 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redict starts from empty (220 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/psync2 [ok]: corrupt payload: hash ziplist with duplicate records (223 ms) [ok]: Shutting down master waits for replica then aborted (525 ms) [31/91 done]: integration/shutdown (7 seconds) Testing integration/psync2-reg [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Stacktraces generated on SIGALRM (102 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redict starts from empty (220 ms) [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [32/91 done]: integration/logging (0 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: hash listpack with duplicate records (223 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (120 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: corrupt payload: hash ziplist uneven record count (213 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: Replication of an expired key does not delete the expired key (509 ms) [ok]: AOF enable will create manifest file (484 ms) [ok]: corrupt payload: hash duplicate records (224 ms) [ok]: corrupt payload: hash empty zipmap (224 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: Test child sending info (1943 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (121 ms) [ok]: BLMOVE (left, right) replication, list exists (1013 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: MIGRATE can correctly transfer large values (4136 ms) [ok]: script won't load anymore if it's in rdb (6 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (17326 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (231 ms) [ok]: PSYNC2 pingoff: setup (1030 ms) [ok]: PSYNC2 #3899 regression: setup (1044 ms) [ok]: PSYNC2 pingoff: write and wait replication (28 ms) [ok]: MIGRATE can correctly transfer hashes (251 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (4 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (286 ms) [ok]: AOF fsync always barrier issue (5331 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1009 ms) [ok]: failed bgsave prevents writes (277 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (257 ms) [33/91 done]: integration/rdb (6 seconds) Testing integration/psync2-master-restart [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3145 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (350 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (218 ms) [ok]: BLMOVE (right, left) replication, list exists (1002 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: MIGRATE timeout actually works (661 ms) [ok]: AOF enable/disable auto gc (205 ms) [ok]: corrupt payload: fuzzer findings - hash crash (224 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (101 ms) [ok]: MIGRATE can migrate multiple keys at once (214 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: AOF can produce consecutive sequence number after reload (119 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (215 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (224 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (301 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (215 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (229 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (101 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (225 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (0 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (225 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (131 ms) [ok]: BLMOVE (right, right) replication, list exists (1003 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1128 ms) [34/91 done]: integration/replication-buffer (10 seconds) Testing integration/failover [ok]: corrupt payload: fuzzer findings - empty intset (224 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (215 ms) [ok]: AOF will trigger limit when AOFRW fails many times (618 ms) [ok]: BLPOP followed by role change, issue #2473 (204 ms) [35/91 done]: unit/dump (23 seconds) Testing integration/redict-cli [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (216 ms) [ok]: Generate timestamp annotations in AOF (321 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: Interactive CLI: INFO response should be printed raw (62 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (215 ms) [ok]: setup replication for following tests (105 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Interactive CLI: Integer reply (65 ms) [ok]: Interactive CLI: Bulk reply (67 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (227 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: FLUSHDB / FLUSHALL should replicate (95 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (224 ms) [ok]: Interactive CLI: Parsing quotes (423 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (224 ms) [ok]: Truncate AOF to specific timestamp (686 ms) [ok]: failover command to specific replica works (823 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (214 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (120 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1119 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (224 ms) [ok]: Interactive CLI: Subscribed mode (604 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (120 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (224 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (413 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (2 ms) [ok]: Non-interactive TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (13 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (4 ms) [ok]: failover command to any replica works (921 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (8 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (2 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (7 ms) [ok]: corrupt payload: OOM in rdbGenericLoadStringObject (214 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (1092 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2192 ms) [ok]: corrupt payload: fuzzer findings - OOM in dictExpand (223 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: EVAL can process writes from AOF in read-only replicas (231 ms) [ok]: Test redict-check-aof for old style resp AOF (5 ms) [ok]: Test redict-check-aof for old style resp AOF - has data in the same format as manifest (5 ms) [ok]: Test redict-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test redict-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test redict-check-aof for Multi Part AOF with rdb-preamble AOF base (6 ms) [ok]: Test redict-check-aof for Multi Part AOF contains a format error (5 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in fix mode (10 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (5 ms) [ok]: failover to a replica with force works (418 ms) [36/91 done]: integration/aof-multi-part (11 seconds) Testing integration/redict-benchmark [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (223 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (3 ms) [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (3 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (121 ms) [ok]: benchmark: full test suite (55 ms) [37/91 done]: integration/aof (12 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (222 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: failover with timeout aborts if replica never catches up (542 ms) [ok]: failovers can be aborted (14 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1636 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (224 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: benchmark: multi-thread set,get (507 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7845 ms) [ok]: benchmark: pipelined full set,get (60 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: benchmark: keyspace length (16 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (3 ms) [ok]: benchmark: read last argument from stdin (5 ms) [38/91 done]: integration/redict-benchmark (1 seconds) Testing unit/pubsub [ok]: corrupt payload: fuzzer findings - empty hash ziplist (223 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (0 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (0 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (120 ms) [ok]: PubSub messages with CLIENT REPLY OFF (85 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: failover aborts if target rejects sync request (517 ms) [ok]: Keyspace notifications: we receive keyspace notifications (42 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Keyspace notifications: we receive keyevent notifications (43 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (0 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (1 ms) [ok]: Dumping an RDB - functions only: no (1574 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (224 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: Keyspace notifications: expired events (background expire) (111 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: Keyspace notifications: new key test (0 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (224 ms) [ok]: dismiss all data types memory (1111 ms) [39/91 done]: unit/pubsub (0 seconds) Testing unit/pubsubshard [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9711 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: corrupt payload: fuzzer findings - huge string (214 ms) [ok]: PubSubShard with CLIENT REPLY OFF (85 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: dismiss client output buffer (293 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (223 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: dismiss client query buffer (202 ms) [ok]: Dumping an RDB - functions only: yes (758 ms) [ok]: Scan mode (48 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (121 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9327 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (225 ms) [40/91 done]: integration/failover (5 seconds) Testing unit/slowlog [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (120 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1928 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - zero max length is correctly handled (5 ms) [ok]: SLOWLOG - max entries is correctly handled (5 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (214 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (2 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (2 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (0 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (214 ms) [41/91 done]: integration/psync2-master-restart (7 seconds) Testing unit/scripting [42/91 done]: unit/pubsubshard (2 seconds) Testing unit/functions [ok]: Redis compatibility global exists (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redict API? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (1 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (1 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (1 ms) [ok]: FUNCTION - test debug reload different options (1 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (1 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (0 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (0 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: corrupt payload: fuzzer findings - empty zset (224 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (179 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redict.sha1hex() implementation (1 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: dismiss replication backlog (1223 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (225 ms) [43/91 done]: integration/dismiss-mem (3 seconds) Testing unit/maxmemory [ok]: FUNCTION - test function kill (402 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (37 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (223 ms) [ok]: SLOWLOG - can be disabled (401 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (215 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (242 ms) [44/91 done]: unit/slowlog (2 seconds) Testing unit/introspection [ok]: FUNCTION - test script kill not working on function (404 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 68667) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (224 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (120 ms) [ok]: Measures elapsed time os.clock() (1003 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (119 ms) [ok]: FUNCTION - test function kill not working on eval (402 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: Connecting as a replica (2168 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (224 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (818 ms) [ok]: Replication: commands with many arguments (issue #1221) (9314 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (63 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (224 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: spopwithcount rewrite srem command (72 ms) [ok]: Disconnecting the replica from master instance (101 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (247 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (223 ms) [ok]: EVAL does not leak in the Lua stack (722 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redict namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (2515 ms) [ok]: Script return recursive object (120 ms) [ok]: Script check unpack with massive arguments (46 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (224 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (236 ms) [ok]: Piping raw protocol (917 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (8 ms) [ok]: DUMP RESTORE with -X option (9 ms) [45/91 done]: integration/redict-cli (7 seconds) Testing unit/introspection-2 [ok]: Replication of SPOP command -- alsoPropagate() API (594 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (0 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (223 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (110 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (223 ms) [46/91 done]: integration/corrupt-dump (15 seconds) Testing unit/limits [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (237 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (38 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (317 ms) [ok]: Timedout script does not cause a false dead client (36 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Data divergence can happen under default conditions (1 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: Timedout script link is still usable after Lua returns (63 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (225 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2001 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (2 ms) [ok]: CLIENT command unhappy path coverage (1 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (1 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (1 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redict.call from function load (0 ms) [ok]: LIBRARIES - redict.setresp from function load (1 ms) [ok]: LIBRARIES - redict.set_repl from function load (0 ms) [ok]: LIBRARIES - redict.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (0 ms) [ok]: LIBRARIES - delete removed all functions on library (1 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: CLIENT KILL close the client connection during bgsave (105 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [47/91 done]: integration/replication-4 (21 seconds) Testing unit/obuf-limits [ok]: CLIENT REPLY OFF/ON: disable all commands reply (41 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (44 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (221 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (46 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR log blocked command only once (1 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: Timedout scripts and unblocked command (351 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (221 ms) [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (1 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (1 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [ok]: FUNCTION - verify OOM on function load and function restore (0 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (214 ms) [ok]: Check if maxclients works refusing connections (903 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (1 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redict version api (0 ms) [ok]: FUNCTION - legacy redis version is hard-coded to 7.2.4 (1 ms) [ok]: FUNCTION - function stats (0 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (1 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [48/91 done]: unit/limits (2 seconds) Testing unit/bitops [ok]: Test replication with blocking lists and sorted sets operations (25004 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (213 ms) [49/91 done]: unit/functions (4 seconds) Testing unit/bitfield [ok]: Connect a replica to the master instance (101 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: BITCOUNT against wrong type (0 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: BITFIELD signed overflow sat (0 ms) [50/91 done]: integration/block-repl (27 seconds) Testing unit/geo [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (1 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (1 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (0 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (1 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (0 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (0 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (0 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: BITFIELD overflow detection fuzzing (143 ms) [ok]: CONFIG save params special case handled properly (905 ms) [ok]: BITCOUNT fuzzing without start/end (263 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (315 ms) [ok]: CONFIG sanity (24 ms) [ok]: BITFIELD overflow wrap fuzzing (212 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: CONFIG REWRITE sanity (200 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (386 ms) [ok]: BITCOUNT fuzzing with start/end (420 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT with illegal arguments (0 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (0 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: BITOP and fuzzing (239 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (338 ms) [51/91 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: CONFIG REWRITE handles save and shutdown properly (616 ms) [ok]: CONFIG SET with multiple args (0 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: redict.replicate_commands() can be issued anywhere now (1 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: BITOP or fuzzing (179 ms) [ok]: redict-server command line arguments - error cases (54 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITOP xor fuzzing (168 ms) [ok]: BITOP NOT fuzzing (28 ms) [ok]: BITOP with integer encoded source objects (3 ms) [ok]: BITOP with non string source key (7 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS against wrong type (0 ms) [ok]: BITPOS will illegal arguments (1 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (1 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (11 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (4 ms) [ok]: redict-server command line arguments - allow passing option name and option value in the same arg (225 ms) [ok]: Memory efficiency with values in range 32 (292 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (452 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3002 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (253 ms) [ok]: redict-server command line arguments - wrong usage that we support anyway (224 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Memory efficiency with values in range 64 (309 ms) [ok]: redict-server command line arguments - allow option value to use the `--` prefix (223 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (225 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (452 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (147 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [52/91 done]: unit/bitops (2 seconds) Testing unit/hyperloglog [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: redict-server command line arguments - option name and option value in the same arg and `--` prefix (215 ms) [ok]: TIME command using cached time (10 ms) [ok]: Memory efficiency with values in range 128 (332 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (278 ms) [ok]: Redis compatibility global exists (0 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redict integer conversion (0 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (245 ms) [ok]: Memory efficiency with values in range 1024 (371 ms) [ok]: HyperLogLog self test passes (381 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (1 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2931 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Client output buffer hard limit is enforced (3311 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (246 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (366 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (21 ms) [ok]: SCRIPTING FLUSH ASYNC (7 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redict.sha1hex() implementation (1 ms) [ok]: HyperLogLogs are promote from sparse to dense (294 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (38 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (246 ms) [ok]: redict-server command line arguments - save with empty input (1106 ms) [ok]: redict-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (223 ms) [ok]: Memory efficiency with values in range 16384 (981 ms) [53/91 done]: unit/memefficiency (2 seconds) Testing unit/lazyfree [ok]: HyperLogLog sparse encoding stress test (613 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: cannot modify protected configuration - no (0 ms) [54/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/wait [ok]: cannot modify protected configuration - local (4 ms) [ok]: Measures elapsed time os.clock() (1013 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: UNLINK can reclaim memory in background (230 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Setup slave (102 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9406 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (232 ms) [ok]: lazy free a stream with all types of metadata (53 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [ok]: EVAL does not leak in the Lua stack (357 ms) [55/91 done]: unit/lazyfree (1 seconds) Testing unit/pause [ok]: SPOP: We can call scripts rewriting client->argv from Lua (42 ms) [ok]: MGET: mget shouldn't be propagated in Lua (111 ms) [ok]: Test read commands are not blocked by client pause (27 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (91 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: TOUCH alters the last access time of a key (3001 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (309 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (325 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: config during loading (904 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (0 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (0 ms) [ok]: Test scripts are blocked by pause RO (0 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: Test both active and passive expires are skipped during client pause (101 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: Script return recursive object (142 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10008 ms) [56/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/querybuf [ok]: Script check unpack with massive arguments (48 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1093 ms) [ok]: CONFIG REWRITE handles rename-command properly (342 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (1 ms) [57/91 done]: unit/pause (1 seconds) Testing unit/tls [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (0 ms) [ok]: The client is now able to disable tracking (1 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (37 ms) [ok]: Timedout script does not cause a false dead client (38 ms) [ok]: Timedout script link is still usable after Lua returns (60 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (0 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (0 ms) [ok]: command stats for MULTI (1 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of Redict commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (2 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (1 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (0 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [59/91 done]: unit/introspection-2 (7 seconds) Testing unit/oom-score-adj [ok]: CONFIG SET oom-score-adj works as expected (9 ms) [ok]: CONFIG REWRITE handles alias config properly (787 ms) [60/91 done]: unit/introspection (8 seconds) Testing unit/shutdown [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [61/91 done]: unit/oom-score-adj (1 seconds) Testing unit/networking [ok]: Timedout scripts and unblocked command (353 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (112 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 127855) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1105 ms) [ok]: CONFIG SET port number (222 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (201 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: Temp rdb will be deleted in signal handle (93 ms) [ok]: CONFIG SET bind address (222 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (97 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: ziplist implementation: value encoding and backlink (11014 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (98 ms) [ok]: Tracking gets notification of lazy expired keys (201 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (0 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (0 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (0 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (0 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (0 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (0 ms) [ok]: Tracking invalidation message of eviction keys should be before response (2 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4221 ms) [ok]: CONFIG SET bind-source-addr (526 ms) [ok]: Tracking gets notification on tracking table key eviction (74 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (0 ms) [ok]: Test ASYNC flushall (1 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: client evicted due to large argv (40 ms) [ok]: client evicted due to large query buf (23 ms) [ok]: client evicted due to percentage of maxmemory (7 ms) [ok]: client evicted due to large multi buf (46 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (200 ms) [ok]: Tracking info is correct (2 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (1 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (1 ms) [ok]: client evicted due to watched key list (116 ms) [ok]: RESP2 based basic invalidation with client reply off (45 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (1 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1103 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (7 ms) [ok]: Default bind address configuration handling (206 ms) [ok]: Protected mode works as expected (3 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [63/91 done]: unit/networking (1 seconds) Testing unit/violations [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: SORT adds integer field to list (1 ms) [64/91 done]: unit/tracking (2 seconds) Testing unit/replybufsize [65/91 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: WAITAOF local copy before fsync (95 ms) [ok]: WAITAOF local copy everysec (0 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (15561 ms) [ok]: query buffer resized correctly (2843 ms) [ok]: query buffer resized correctly when not idle (26 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [ok]: client evicted due to pubsub subscriptions (775 ms) [ok]: client evicted due to tracking redirection (49 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: WAITAOF replica copy before fsync (74 ms) [ok]: verify reply buffer limits (659 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: WAITAOF replica copy everysec (729 ms) [ok]: PSYNC2 #3899 regression: verify consistency (15 ms) [ok]: Lua scripts eviction does not generate many scripts (69 ms) [ok]: Lua scripts eviction is plain LRU (27 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Lua scripts eviction does not affect script load (96 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: client evicted due to client tracking prefixes (1474 ms) [ok]: client evicted due to output buf (10 ms) [ok]: client no-evict on (72 ms) [ok]: client no-evict off (23 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [67/91 done]: integration/psync2-reg (23 seconds) Testing unit/cluster/cli [ok]: avoid client eviction when client is freed by output buffer limit (97 ms) [ok]: no-writes shebang flag on replica (104 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1004 ms) [ok]: not enough good replicas (1 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (102 ms) [ok]: Test change cluster-announce-bus-port at runtime (202 ms) [ok]: not enough good replicas state change during long script (522 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (4 ms) [ok]: decrease maxmemory-clients causes client eviction (427 ms) [68/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/scripting [ok]: Key lazy expires during key migration (12 ms) [ok]: Coverage: Basic cluster commands (1 ms) [ok]: Consistent eval error reporting (8 ms) [ok]: LUA redict.error_reply API (1 ms) [ok]: LUA redict.error_reply API with empty string (0 ms) [ok]: LUA redict.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (1 ms) [ok]: evict clients only until below limit (79 ms) [69/91 done]: unit/scripting (14 seconds) Testing unit/cluster/hostnames [ok]: query buffer resized correctly with fat argv (2978 ms) [70/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/human-announced-nodename [ok]: evict clients in right order (large to small) (91 ms) [ok]: client total memory grows during client no-evict (125 ms) [ok]: client total memory grows during maxmemory-clients disabled (124 ms) [71/91 done]: unit/client-eviction (5 seconds) Testing unit/cluster/multi-slot-operations [72/91 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/slot-ownership [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5031 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2010 ms) [ok]: No response for single command if client output buffer hard limit is enforced (113 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (102 ms) [ok]: WAITAOF replica copy appendfsync always (0 ms) [ok]: Create 3 node cluster (1919 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Perform a Resharding (6 ms) [ok]: Verify command got unblocked after resharding (49 ms) [ok]: Wait for cluster to be stable (8 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (3 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: ziplist implementation: encoding stress testing (6069 ms) [73/91 done]: unit/type/list-3 (44 seconds) Testing unit/cluster/links [ok]: Eval scripts with shebangs and functions default to no cross slots (0 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [74/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: WAITAOF replica copy if replica is blocked (900 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1043 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (14 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (12 ms) [ok]: Obuf limit, KEYS stopped mid-run (58 ms) [76/91 done]: unit/obuf-limits (14 seconds) [ok]: Set cluster human announced nodename and let it propagate (112 ms) [ok]: Kill a cluster node and wait for fail state (1374 ms) [ok]: Verify command got unblocked after cluster failure (67 ms) [ok]: Set cluster hostnames and verify they are propagated (153 ms) [ok]: Update hostnames and make sure they are all eventually propagated (187 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9417 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1014 ms) [ok]: WAITAOF on promoted replica (14 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (207 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 183899) (1 ms) [ok]: Continuous slots distribution (104 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (5 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (2 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (19 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (2 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (152 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (172 ms) [77/91 done]: unit/cluster/multi-slot-operations (3 seconds) [ok]: Slave should be able to synchronize with the master (114 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (154 ms) [78/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (34 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2010 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (6 ms) [ok]: Human nodenames are visible in log messages (3542 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (1018 ms) [79/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: Detect write load to master (1002 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: Each node has two links with each peer (4 ms) [ok]: Validate cluster links format (0 ms) [ok]: Functions are added to new node on redict-cli cluster add-node (3088 ms) [ok]: WAITAOF master isn't configured to do AOF (1003 ms) [ok]: Verify that single primary marks replica as failed (3125 ms) [ok]: WAITAOF replica isn't configured to do AOF (52 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3854 ms) [ok]: PSYNC2: cluster is consistent after failover (6 ms) [ok]: Test restart will keep hostname information (216 ms) [ok]: Test hostname validation (1 ms) [80/91 done]: unit/cluster/hostnames (8 seconds) [ok]: GEOSEARCH fuzzy test - byradius (18676 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (957 ms) [ok]: WAITAOF master sends PING after last write (1212 ms) [ok]: WAITAOF master client didn't send any write command (1211 ms) [ok]: Migrate the last slot away from a node using redict-cli (4234 ms) [ok]: WAITAOF master client didn't send any command (1201 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 243367) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (1 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6286 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (15899 ms) [ok]: redict-cli -4 --cluster create using 127.0.0.1 with cluster-port (1928 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: redict-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1126 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3331 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: AOF rewrite during write load: RDB preamble=no (37805 ms) [ok]: Disconnect link when send buffer limit reached (9047 ms) [ok]: Verify that multiple primaries mark replica as failed (6329 ms) [81/91 done]: unit/cluster/failure-marking (15 seconds) [ok]: Turning off AOF kills the background writing child if any (103 ms) [ok]: AOF rewrite of list with listpack encoding, string data (102 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (222 ms) [ok]: Link memory increases with publishes (688 ms) [ok]: AOF rewrite of list with listpack encoding, int data (102 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (205 ms) [ok]: AOF rewrite of set with intset encoding, string data (104 ms) [ok]: Link memory resets after publish messages flush (356 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (174 ms) [82/91 done]: unit/cluster/links (16 seconds) [ok]: AOF rewrite of set with intset encoding, int data (103 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (112 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2328 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (131 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (71 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (123 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (103 ms) [ok]: redict-cli -4 --cluster create using localhost with cluster-port (1917 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (194 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (104 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (133 ms) [ok]: AOF rewrite functions (52 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (211 ms) [ok]: BGREWRITEAOF is refused if already in progress (8 ms) [83/91 done]: unit/aofrw (58 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1325 ms) [ok]: redict-cli -4 --cluster add-node using localhost with cluster-port (1127 ms) [ok]: setup replication for following tests (102 ms) [84/91 done]: unit/cluster/cli (20 seconds) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (681 ms) [ok]: GEOSEARCH fuzzy test - bybox (12004 ms) [ok]: GEOSEARCH box edges fuzzy test (36 ms) [85/91 done]: unit/geo (31 seconds) [86/91 done]: unit/wait (28 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7834 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 311164) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: slave buffer are counted correctly (29214 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (121 ms) [87/91 done]: integration/psync2 (46 seconds) [ok]: replica buffer don't induce eviction (4265 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (152 ms) [ok]: client tracking don't cause eviction feedback loop (1262 ms) [ok]: propagation with eviction (97 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: lru/lfu value of the key just added (1 ms) [88/91 done]: unit/maxmemory (43 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (15811 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9387 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: Fuzzing dense/sparse encoding: Redict should always detect errors (44856 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (0 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (0 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9408 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3315 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1345 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (87 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1088 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [89/91 done]: unit/hyperloglog (52 seconds) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (14788 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6286 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7879 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (19447 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (425 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (339 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9443 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (859 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Busy script during async loading (869 ms) [ok]: Blocked commands and configs during async-loading (430 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 30021 to exit... Waiting for process 30021 to exit... Waiting for process 30021 to exit... Waiting for process 30021 to exit... Waiting for process 30021 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9493 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (85 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6315 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7882 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless loading short read (30646 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9440 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless no replicas drop during rdb pipe (6276 ms) [ok]: diskless slow replicas drop during rdb pipe (2368 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10605 ms) [90/91 done]: integration/replication-psync (155 seconds) [ok]: diskless fast replicas drop during rdb pipe (4694 ms) [ok]: diskless all replicas drop during rdb pipe (1745 ms) [ok]: diskless timeout replicas drop during rdb pipe (4929 ms) [ok]: diskless replication child being killed is collected (1438 ms) [ok]: replication child dies when parent is killed - diskless: yes (1149 ms) [ok]: replication child dies when parent is killed - diskless: no (1349 ms) [ok]: diskless replication read pipe cleanup (845 ms) [ok]: replicaof right after disconnection (1821 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (921 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (102 ms) [ok]: replica can handle EINTR if use diskless load (636 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (96 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (143 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (104 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (103 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (111 ms) [91/91 done]: integration/replication (175 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (1 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 0 seconds - unit/type/incr 1 seconds - unit/protocol 1 seconds - unit/keyspace 2 seconds - unit/auth 3 seconds - unit/info 0 seconds - unit/quit 3 seconds - unit/type/hash 2 seconds - unit/acl 5 seconds - unit/type/stream-cgroups 0 seconds - unit/acl-v2 7 seconds - unit/type/string 5 seconds - unit/multi 8 seconds - unit/sort 10 seconds - unit/type/set 10 seconds - unit/type/list-2 7 seconds - unit/latency-monitor 11 seconds - unit/other 13 seconds - unit/scan 14 seconds - unit/type/list 0 seconds - integration/aof-race 8 seconds - integration/replication-2 15 seconds - unit/type/stream 16 seconds - unit/expire 10 seconds - integration/replication-3 18 seconds - unit/type/zset 1 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-ziplist-zset-on-load 7 seconds - integration/shutdown 0 seconds - integration/logging 6 seconds - integration/rdb 10 seconds - integration/replication-buffer 23 seconds - unit/dump 11 seconds - integration/aof-multi-part 12 seconds - integration/aof 1 seconds - integration/redict-benchmark 0 seconds - unit/pubsub 5 seconds - integration/failover 7 seconds - integration/psync2-master-restart 2 seconds - unit/pubsubshard 3 seconds - integration/dismiss-mem 2 seconds - unit/slowlog 7 seconds - integration/redict-cli 15 seconds - integration/corrupt-dump 21 seconds - integration/replication-4 2 seconds - unit/limits 4 seconds - unit/functions 27 seconds - integration/block-repl 1 seconds - unit/bitfield 2 seconds - unit/bitops 2 seconds - unit/memefficiency 16 seconds - integration/psync2-pingoff 1 seconds - unit/lazyfree 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/pause 0 seconds - unit/tls 7 seconds - unit/introspection-2 8 seconds - unit/introspection 1 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 1 seconds - unit/networking 2 seconds - unit/tracking 0 seconds - unit/violations 1 seconds - unit/replybufsize 23 seconds - integration/psync2-reg 3 seconds - unit/cluster/announced-endpoints 14 seconds - unit/scripting 6 seconds - unit/querybuf 5 seconds - unit/client-eviction 3 seconds - unit/cluster/misc 44 seconds - unit/type/list-3 2 seconds - unit/cluster/scripting 0 seconds - unit/cluster/cluster-response-tls 14 seconds - unit/obuf-limits 3 seconds - unit/cluster/multi-slot-operations 4 seconds - unit/cluster/slot-ownership 6 seconds - unit/cluster/human-announced-nodename 8 seconds - unit/cluster/hostnames 15 seconds - unit/cluster/failure-marking 16 seconds - unit/cluster/links 58 seconds - unit/aofrw 20 seconds - unit/cluster/cli 31 seconds - unit/geo 28 seconds - unit/wait 46 seconds - integration/psync2 43 seconds - unit/maxmemory 52 seconds - unit/hyperloglog 155 seconds - integration/replication-psync 175 seconds - integration/replication 0 seconds - list-large-memory 1 seconds - set-large-memory 0 seconds - bitops-large-memory 2 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict: Entering fakeroot... make -C src install make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' INSTALL redict-sentinel INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redict-server INSTALL redict-benchmark INSTALL redict-cli INSTALL ../redict.conf INSTALL ../sentinel.conf make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict-benchmark*: Running split function benchmark... 'usr/bin/redict-benchmark' -> '/home/buildozer/aports/community/redict/pkg/redict-benchmark/usr/bin/redict-benchmark' >>> redict-benchmark*: Preparing subpackage redict-benchmark... >>> redict-benchmark*: Stripping binaries >>> redict-benchmark*: Running postcheck for redict-benchmark >>> redict-cli*: Running split function cli... 'usr/bin/redict-cli' -> '/home/buildozer/aports/community/redict/pkg/redict-cli/usr/bin/redict-cli' >>> redict-cli*: Preparing subpackage redict-cli... >>> redict-cli*: Stripping binaries >>> redict-cli*: Running postcheck for redict-cli >>> redict-compat*: Running split function compat... >>> redict-compat*: Preparing subpackage redict-compat... >>> redict-compat*: Script found. /bin/sh added as a dependency for redict-compat-7.3.2-r0.apk >>> redict-compat*: Adding .pre-install >>> redict-compat*: Running postcheck for redict-compat >>> redict-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/init.d' >>> redict-openrc*: Preparing subpackage redict-openrc... >>> redict-openrc*: Running postcheck for redict-openrc >>> redict*: Running postcheck for redict >>> redict*: Preparing package redict... >>> redict*: Stripping binaries >>> redict*: Script found. /bin/sh added as a dependency for redict-7.3.2-r0.apk >>> redict*: Adding .post-install >>> redict*: Adding .post-upgrade >>> redict*: Adding .pre-install >>> redict-benchmark*: Scanning shared objects >>> redict-cli*: Scanning shared objects >>> redict-compat*: Scanning shared objects >>> redict-openrc*: Scanning shared objects >>> redict*: Scanning shared objects >>> redict-benchmark*: Tracing dependencies... so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-benchmark*: Package size: 322.3 KB >>> redict-benchmark*: Compressing data... >>> redict-benchmark*: Create checksum... >>> redict-benchmark*: Create redict-benchmark-7.3.2-r0.apk >>> redict-cli*: Tracing dependencies... so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-cli*: Package size: 490.4 KB >>> redict-cli*: Compressing data... >>> redict-cli*: Create checksum... >>> redict-cli*: Create redict-cli-7.3.2-r0.apk >>> redict-compat*: Tracing dependencies... !redis !valkey-compat /bin/sh redict-benchmark=7.3.2-r0 redict-cli=7.3.2-r0 redict=7.3.2-r0 >>> redict-compat*: Package size: 1.0 B >>> redict-compat*: Compressing data... >>> redict-compat*: Create checksum... >>> redict-compat*: Create redict-compat-7.3.2-r0.apk >>> redict-openrc*: Tracing dependencies... >>> redict-openrc*: Package size: 1.7 KB >>> redict-openrc*: Compressing data... >>> redict-openrc*: Create checksum... >>> redict-openrc*: Create redict-openrc-7.3.2-r0.apk >>> redict*: Tracing dependencies... /bin/sh so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict*: Package size: 2.7 MB >>> redict*: Compressing data... >>> redict*: Create checksum... >>> redict*: Create redict-7.3.2-r0.apk >>> redict: Build complete at Fri, 10 Jan 2025 16:09:43 +0000 elapsed time 0h 3m 33s >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Uninstalling dependencies... (1/8) Purging .makedepends-redict (20250110.160611) (2/8) Purging linux-headers (6.12.6-r0) (3/8) Purging openssl-dev (3.3.2-r4) (4/8) Purging tcl (8.6.16-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r10.trigger OK: 398 MiB in 104 packages >>> redict: Updating the community/aarch64 repository index... >>> redict: Signing the index...