>>> redis: Building community/redis 7.2.7-r0 (using abuild 3.14.1-r5) started Fri, 10 Jan 2025 16:13:14 +0000 >>> redis: Validating /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.12.6-r0) (2/8) Installing openssl-dev (3.3.2-r4) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.16-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20250110.161315) Executing busybox-1.37.0-r10.trigger OK: 413 MiB in 112 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.7.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.7.tar.gz >>> redis: Checking sha512sums... redis-7.2.7.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/edge/redis-7.2.7.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hiredis' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC zipmap.o CC sha1.o CC ziplist.o CC pqsort.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC crcspeed.o CC crc64.o CC bitops.o CC syscheck.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 26987 Testing unit/printver [ready]: 26988 Testing unit/dump [ready]: 26989 Testing unit/auth [ready]: 26990 Testing unit/protocol [ready]: 26991 Testing unit/keyspace [ready]: 26992 Testing unit/scan [ready]: 26993 Testing unit/info [ready]: 26994 Testing unit/info-command [ready]: 26995 Testing unit/type/string [ready]: 26997 Testing unit/type/incr [ready]: 26996 Testing unit/type/list [ready]: 26999 Testing unit/type/list-2 [ready]: 26998 Testing unit/type/list-3 [ready]: 27000 Testing unit/type/set [ready]: 27001 Testing unit/type/zset [ready]: 27002 Testing unit/type/hash [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: DEL against a single item (0 ms) Testing Redis version 7.2.7 (00000000) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: INCR against non existing key (0 ms) [ok]: Vararg DEL (0 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: SET and GET an item (0 ms) [ok]: Explicit regression for a list bug (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: SET and GET an empty item (0 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: info command with at most one sub command (1 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: INCR over 32bit value (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: DBSIZE (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: DEL all keys (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: reg node check compression with insert and pop (1 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: INCR can modify objects in-place (0 ms) [ok]: reg node check compression with lset (0 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: plain node check compression (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: plain node check compression using lset (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: HRANDFIELD - listpack (4 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (7 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: SADD against non set (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: HRANDFIELD - hashtable (4 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (1 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: SADD a non-integer against a large intset (5 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (0 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: SADD an integer larger than 64 bits to a large intset (5 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (2 ms) [ok]: ZREMRANGEBYLEX basics - listpack (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: Handle an empty query (41 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (21 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: Very big payload in GET/SET (39 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: SCAN basic (48 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: Negative multibulk length (44 ms) [ok]: Out of range multibulk length (0 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (46 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (93 ms) [ok]: DUMP of non existing key returns nil (0 ms) [1/92 done]: unit/info-command (0 seconds) Testing unit/type/stream [ok]: SCAN COUNT (53 ms) [ok]: HRANDFIELD with - hashtable (92 ms) [2/92 done]: unit/type/incr (0 seconds) Testing unit/type/stream-cgroups [3/92 done]: unit/printver (0 seconds) Testing unit/sort [ok]: latencystats: disable/enable (1 ms) [ok]: Protocol desync regression test #1 (31 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (131 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (0 ms) [ok]: Variadic SADD (0 ms) [ok]: SCAN MATCH (43 ms) [ok]: Protocol desync regression test #2 (30 ms) [ok]: latencystats: measure latency (51 ms) [ok]: Check compression with recompress (43 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (1 ms) [ok]: Protocol desync regression test #3 (31 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (0 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: errorstats: rejected call unknown command (0 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: errorstats: rejected call by authorization error (1 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: HRANDFIELD with - listpack (89 ms) [ok]: test large number of args (21 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: SCAN TYPE (65 ms) [ok]: Set encoding after DEBUG RELOAD (70 ms) [ok]: SREM basics - $type (1 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: SREM basics - $type (6 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: SREM basics - intset (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (2 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: XPENDING is able to return pending items (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (1 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (2 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (0 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (0 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SCAN unknown type (45 ms) [ok]: HSET/HLEN - Big hash creation (62 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: SUNIONSTORE with two sets - regular (6 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (5 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (21 ms) [ok]: XADD with MAXLEN option (54 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (0 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (0 ms) [ok]: Generated sets must be encoded correctly - intset (1 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: HGET against the big hash (43 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: HGET against non existing key (1 ms) [ok]: HSET in update and insert mode (0 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SCAN with expired keys (50 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (1 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: Test LSET with packed / plain combinations (88 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (39 ms) [ok]: MIGRATE is caching connections (223 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (12 ms) [ok]: XADD with MAXLEN option and the '=' argument (55 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: SCAN with expired keys with TYPE filter (50 ms) [ok]: HMSET - big hash (54 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: SSCAN with encoding intset (2 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (0 ms) [ok]: SSCAN with encoding listpack (1 ms) [ok]: SSCAN with encoding hashtable (3 ms) [ok]: HSCAN with encoding listpack (1 ms) [ok]: Quicklist: SORT BY key (8 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: XADD with MAXLEN option and the '~' argument (47 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: Quicklist: SORT BY hash field (8 ms) [ok]: Crash due to wrongly recompress after lrem (223 ms) [ok]: HMGET - big hash (55 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: HSCAN with encoding hashtable (63 ms) [ok]: ZSCAN with encoding listpack (1 ms) [ok]: Regression for a crash with blocking ops and pipelining (0 ms) [ok]: XADD with MINID option (54 ms) [ok]: HVALS - big hash (2 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: HGETALL - small hash (0 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (44 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: HGETALL - big hash (26 ms) [ok]: HDEL and return value (0 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (1 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: Test LSET with packed consist only one item (172 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: ZSCAN with encoding skiplist (63 ms) [ok]: SCAN guarantees check under write load (14 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: HSTRLEN against the big hash (40 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (19 ms) [4/92 done]: unit/protocol (0 seconds) Testing unit/expire [ok]: Hash fuzzing #2 - 10 fields (11 ms) [ok]: ZSCAN scores: regression test for issue #2175 (52 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: LPOS basic usage - quicklist (40 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (89 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (44 ms) [ok]: BLPOP: multiple existing lists - quicklist (87 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (43 ms) [ok]: DEL against expired key (1100 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (87 ms) [ok]: COPY basic usage for list - quicklist (42 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (9 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: COPY basic usage for skiplist sorted set (6 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: COPY basic usage for hashtable hash (11 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: COPY basic usage for stream (62 ms) [ok]: COPY basic usage for stream-cgroups (5 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: BLMOVE left left - quicklist (44 ms) [ok]: RANDOMKEY (4 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Regression for pattern matching very long nested loops (2 ms) [ok]: BLMOVE left right - quicklist (43 ms) [5/92 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: BLMOVE right left - quicklist (43 ms) [ok]: BLMOVE right right - quicklist (44 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (0 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (0 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: Hash fuzzing #1 - 512 fields (854 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (0 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (0 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (2 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Coverage: HELP commands (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1095 ms) [ok]: SAVE - make sure there are all the types as values (2 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: MASTERAUTH test with binary password (906 ms) [6/92 done]: unit/auth (2 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (0 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: FUZZ stresser with data model binary (391 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (2 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (2 ms) [ok]: After successful EXEC key is no longer watched (0 ms) [ok]: After failed EXEC key is no longer watched (0 ms) [ok]: It is possible to UNWATCH (0 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (0 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (2 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (0 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: stats: instantaneous metrics (1602 ms) [ok]: Hash fuzzing #2 - 512 fields (543 ms) [ok]: stats: debug metrics (111 ms) [ok]: XCLAIM can claim PEL items from another consumer (603 ms) [ok]: Very big payload random access (2013 ms) [ok]: XADD mass insertion and XLEN (1777 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [7/92 done]: unit/info (2 seconds) Testing unit/quit [ok]: FUZZ stresser with data model alpha (418 ms) [ok]: Big Quicklist: SORT BY key (584 ms) [ok]: Big Quicklist: SORT BY key with limit (10 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (0 ms) [ok]: BRPOPLPUSH timeout (1012 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: XCLAIM without JUSTID increments delivery count (401 ms) [8/92 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: XRANGE can be used to iterate the whole stream (283 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (117 ms) [ok]: ZDIFF fuzzing - listpack (2508 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (0 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: SDIFF fuzzing (2266 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: SINTERSTORE against non-set should throw error (0 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (0 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: SRANDMEMBER - listpack (5 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: SPOP basics - intset (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: FUZZ stresser with data model compr (380 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: SRANDMEMBER - intset (5 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: SPOP integer from listpack set (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: SPOP with - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: SPOP with - intset (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: SPOP with - hashtable (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: SPOP new implementation: code path #3 intset (1 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: SPOP new implementation: code path #3 listpack (1 ms) [ok]: XCLAIM same consumer (202 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (76 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (1 ms) [ok]: SRANDMEMBER with - listpack (13 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (0 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (791 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (1 ms) [ok]: SRANDMEMBER with - intset (12 ms) [ok]: SRANDMEMBER with - hashtable (14 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: SRANDMEMBER histogram distribution - listpack (46 ms) [ok]: Hash ziplist of various encodings (91 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: SRANDMEMBER histogram distribution - intset (46 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: Big Quicklist: SORT BY hash field (574 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (47 ms) [9/92 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: SET 10000 numeric keys and access all them in reverse order (849 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: BGSAVE (102 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: Hash table: SORT BY key (8 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: WATCH will consider touched expired keys (1103 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (0 ms) [ok]: Hash table: SORT BY hash field (8 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (1 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any channel (0 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (0 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (0 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (1 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (0 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (0 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (0 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (0 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (8 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (0 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (3 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (0 ms) [ok]: ACL LOG is able to test similar events (0 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (0 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (69 ms) [ok]: ACL can log errors in the context of Lua scripting (0 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (0 ms) [ok]: ACL LOG entries are limited to a maximum amount (2 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (1 ms) [ok]: ACL-Metrics invalid key accesses (1 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (602 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (1 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: Check consistency of different data types after a reload (432 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (2 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (0 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: Same dataset digest if saving/reloading as AOF? (169 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (104 ms) [ok]: Consumer seen-time and active-time (204 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: XREADGROUP with NOACK creates consumer (2 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1002 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (0 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (1 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (103 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: Consumer group lag with XDELs (5 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (2 ms) [ok]: Consumer group lag with XTRIM (2 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (0 ms) [ok]: MULTI and script timeout (402 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (103 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (102 ms) [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Test loading duplicate users in config on startup (9 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1951 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: EXEC and script timeout (402 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (2 ms) [ok]: LTRIM stress testing - quicklist (4684 ms) [ok]: ACL from config file and config rewrite (202 ms) [10/92 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: MULTI-EXEC body and script timeout (403 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (0 ms) [ok]: Test flexible selector definition (2 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: Validate read and write permissions format - empty selector (0 ms) [ok]: Validate read and write permissions format - empty pattern (0 ms) [ok]: Validate read and write permissions format - no pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (0 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (0 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Big Hash table: SORT BY key (562 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (0 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: Big Hash table: SORT BY key with limit (13 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (103 ms) [ok]: BLPOP: timeout (1075 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: BRPOP: with single empty list argument (0 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (0 ms) [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (20 ms) [ok]: BRPOP: second argument is not a list (1 ms) [11/92 done]: unit/type/stream-cgroups (5 seconds) Testing unit/latency-monitor [ok]: PSETEX can set sub-second expires (102 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [12/92 done]: unit/acl-v2 (0 seconds) Testing integration/block-repl [ok]: just EXEC and script timeout (402 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (0 ms) [ok]: XREAD with non empty second stream (875 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: MULTI propagation of PUBLISH (97 ms) [ok]: Blocking XREAD will not reply with an empty array (99 ms) [ok]: MULTI propagation of SCRIPT LOAD (102 ms) [ok]: Big Hash table: SORT BY hash field (564 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (0 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (0 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SETNX against expired volatile key (2592 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: SORT regression for issue #19, sorting floats (8 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (1 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (0 ms) [ok]: XDEL multiply id test (1 ms) [ok]: SORT speed, 100 element list BY key, 100 times (17 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (18 ms) [ok]: SORT speed, 100 element list directly, 100 times (11 ms) [ok]: SORT speed, 100 element list BY , 100 times (10 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: ZDIFF fuzzing - skiplist (2973 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: GETDEL propagate as DEL command to replica (109 ms) [13/92 done]: unit/sort (6 seconds) Testing integration/replication [ok]: MULTI propagation of SCRIPT FLUSH (100 ms) [ok]: ZMPOP propagate as pop with count command to replica (94 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (6 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (1 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (0 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2105 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: SCAN regression test for issue #4906 (5294 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [14/92 done]: unit/scan (6 seconds) Testing integration/replication-2 [ok]: Redis should actively expire keys incrementally (603 ms) [ok]: MULTI with BGREWRITEAOF (203 ms) [ok]: SETBIT fuzzing (285 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: BRPOP: timeout (1078 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (0 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (20 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: BZMPOP readraw in RESP3 (200 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: MULTI with config set appendonly (203 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (0 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (540 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (199 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [ok]: APPEND fuzzing (154 ms) [ok]: First server should have role slave after SLAVEOF (1001 ms) [ok]: FLUSHDB (47 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (0 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [15/92 done]: unit/multi (4 seconds) Testing integration/replication-3 [ok]: ZUNIONSTORE result is sorted (119 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (21 ms) [ok]: ZMSCORE - listpack (21 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (24 ms) [ok]: ZSET sorting stresser - listpack (30 ms) [ok]: GETRANGE fuzzing (727 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (0 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: XDEL fuzz test (1231 ms) [16/92 done]: unit/type/string (7 seconds) Testing integration/replication-4 [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Redis should lazy expire keys (1002 ms) [ok]: First server should have role slave after SLAVEOF (0 ms) [ok]: Don't rehash if redis has child process (410 ms) [ok]: BLMPOP_LEFT: timeout (1078 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: Process title set as expected (1 ms) [17/92 done]: unit/other (6 seconds) Testing integration/replication-psync [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (7 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1001 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: BLMPOP_RIGHT: timeout (1076 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1539 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (136 ms) [ok]: BLMPOP propagate as pop with count command to replica (199 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (43 ms) [ok]: LINSERT - quicklist (44 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (1 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: Test latency events logging (3401 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: LINDEX consistency test - listpack (48 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (206 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (18 ms) [ok]: LINDEX random access - listpack (34 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (58 ms) [ok]: LINDEX consistency test - listpack (66 ms) [ok]: LINDEX random access - listpack (48 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (94 ms) [ok]: LINDEX consistency test - quicklist (33 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8468 ms) [ok]: LINDEX random access - quicklist (27 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (63 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2815 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (6218 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (0 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: LINDEX consistency test - quicklist (89 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (490 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: LINDEX random access - quicklist (64 ms) [ok]: LTRIM stress testing - listpack (4605 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (122 ms) [ok]: LLEN against non-list value error (1 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [18/92 done]: unit/type/list-2 (9 seconds) Testing integration/replication-buffer [ok]: RPOPLPUSH base case - quicklist (45 ms) [ok]: LMOVE left left base case - quicklist (43 ms) [ok]: LMOVE left right base case - quicklist (43 ms) [ok]: LMOVE right left base case - quicklist (43 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (44 ms) [ok]: MASTER and SLAVE consistency with expire (2920 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (22 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (90 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (86 ms) [ok]: intsets implementation stress testing (919 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (90 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2009 ms) [19/92 done]: unit/type/set (10 seconds) Testing integration/shutdown [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (87 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (47 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (71 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (46 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (44 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (3 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (43 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (0 ms) [ok]: LMOVE left right base case - listpack (0 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (41 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (47 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (0 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (0 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (42 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (300 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (89 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (1 ms) [ok]: Mass RPOP/LPOP - listpack (22 ms) [ok]: Mass RPOP/LPOP - listpack (44 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (134 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: LMPOP multiple existing lists - quicklist (176 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: LMPOP propagate as pop with count command to replica (22 ms) [ok]: LRANGE basics - quicklist (44 ms) [ok]: LRANGE inverted indexes - quicklist (47 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (2733 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (1 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (46 ms) [ok]: LRANGE out of range negative end index - quicklist (47 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (0 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (0 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [20/92 done]: unit/latency-monitor (6 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: XRANGE fuzzing (4817 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: XTRIM with MAXLEN option basic test (60 ms) [ok]: XADD with LIMIT consecutive calls (6 ms) [ok]: XTRIM with ~ is limited (7 ms) [ok]: XTRIM without ~ is not limited (6 ms) [ok]: XTRIM without ~ and with LIMIT (7 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: All replicas share one global replication buffer (45 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (5 ms) [ok]: LTRIM basics - quicklist (527 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1828 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: LTRIM out of range negative end index - quicklist (93 ms) [ok]: LSET - quicklist (47 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (6 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (1 ms) [ok]: LREM remove all the occurrences - quicklist (42 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: Short read: Server should have logged an error (0 ms) [ok]: Short read: Utility should confirm the AOF is not valid (6 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: Short read: Utility should be able to fix the AOF (4 ms) [ok]: XADD with MINID > lastid can propagate correctly (6 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (14 ms) [ok]: ZMSCORE - skiplist (13 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (43 ms) [ok]: LREM remove all the occurrences - listpack (0 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (0 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (14 ms) [ok]: ZSET sorting stresser - skiplist (18 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: Test replication with parallel clients writing in different DBs (5229 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (6 ms) [ok]: List listpack -> quicklist encoding conversion (171 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (6 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: List quicklist -> listpack encoding conversion (220 ms) [ok]: List encoding conversion when RDB loading (3 ms) [ok]: List invalid list-max-listpack-size config (43 ms) [ok]: List of various encodings (49 ms) [ok]: List of various encodings - sanitize dump (1 ms) [ok]: Unblock fairness is kept while pipelining (1 ms) [ok]: Unblock fairness is kept during nested unblock (1 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (10 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: XADD with ~ MINID can propagate correctly (6 ms) [21/92 done]: unit/type/list (13 seconds) Testing integration/aof-race [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (80 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: Redis should not propagate the read command on lazy expire (96 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (6 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (6 ms) [22/92 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [23/92 done]: unit/expire (13 seconds) Testing integration/rdb [ok]: MASTER and SLAVE dataset should be identical after complex ops (4218 ms) [ok]: Multi Part AOF can't load data when some file missing (107 ms) [ok]: test old version rdb file (0 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (107 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1386 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (107 ms) [ok]: RDB encoding loading test (4 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (0 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1725 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (109 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (128 ms) [24/92 done]: integration/replication-2 (8 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (107 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (160 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (11 ms) [ok]: Replication backlog size can outgrow the backlog limit config (779 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (108 ms) [ok]: Empty stream can be rewrite into AOF correctly (102 ms) [ok]: corrupt payload: #7445 - with sanitize (224 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (109 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (103 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (109 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (108 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (223 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (407 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (0 ms) [ok]: Test RDB stream encoding (54 ms) [ok]: Test RDB stream encoding - sanitize dump (4 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [25/92 done]: unit/type/stream (14 seconds) Testing integration/corrupt-dump-fuzzer [ok]: corrupt payload: invalid zlbytes header (222 ms) [ok]: Multi Part AOF can start when no aof and no manifest (120 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6292 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (118 ms) [ok]: Server should not start if RDB is corrupted (0 ms) [ok]: corrupt payload: valid zipped hash header, dup records (213 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (122 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (120 ms) [ok]: corrupt payload: quicklist big ziplist prev len (224 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (121 ms) [ok]: Test FLUSHALL aborts bgsave (285 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: bgsave resets the change counter (101 ms) [ok]: corrupt payload: quicklist small ziplist prev len (224 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1224 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (225 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (0 ms) [ok]: MIGRATE cached connections are released after some time (15001 ms) [ok]: corrupt payload: quicklist ziplist wrong count (224 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (225 ms) [ok]: Shutting down master waits for replica timeout (1814 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (121 ms) [ok]: MIGRATE is able to migrate a key between two instances (223 ms) [ok]: corrupt payload: #3080 - quicklist (223 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (458 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (124 ms) [ok]: MIGRATE is able to copy a key between two instances (214 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (112 ms) [ok]: corrupt payload: quicklist with empty ziplist (213 ms) [ok]: Slave is able to evict keys created in writable slaves (6003 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: client freed during loading (837 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (224 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (224 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (103 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (103 ms) [ok]: MIGRATE propagates TTL correctly (223 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (224 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (629 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: corrupt payload: #3080 - ziplist (224 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3718 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (107 ms) [ok]: Test RDB load info (521 ms) [26/92 done]: integration/replication-3 (11 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can handle appendfilename contains whitespaces (317 ms) [ok]: Shutting down master waits for replica then fails (1243 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (220 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (122 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (122 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (218 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: listpack invalid size header (224 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: Shutting down master waits for replica then aborted (523 ms) [27/92 done]: integration/shutdown (7 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (3 ms) [28/92 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: listpack too long entry len (119 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: BRPOPLPUSH replication, list exists (1002 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8473 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: corrupt payload: listpack very long entry len (120 ms) [ok]: BZMPOP propagate as pop with count command to replica (191 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (2 ms) [ok]: AOF enable will create manifest file (483 ms) [ok]: Replication of an expired key does not delete the expired key (509 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: listpack too long entry prev len (214 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [29/92 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/logging [30/92 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: Crash report generated on SIGABRT (1 ms) [ok]: corrupt payload: stream with duplicate consumers (224 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [31/92 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: First server should have role slave after SLAVEOF (0 ms) [ok]: ZSET skiplist order consistency when elements are moved (486 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: ZRANDMEMBER - listpack (4 ms) [ok]: ZRANDMEMBER - skiplist (4 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: AOF fsync always barrier issue (5280 ms) [ok]: corrupt payload: hash ziplist with duplicate records (224 ms) [ok]: ZRANDMEMBER with - skiplist (148 ms) [ok]: ZRANDMEMBER with - listpack (148 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (7 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (3 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: corrupt payload: hash listpack with duplicate records (223 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [32/92 done]: unit/type/zset (18 seconds) Testing integration/psync2-pingoff [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (121 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (992 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (102 ms) [ok]: corrupt payload: hash ziplist uneven record count (214 ms) [ok]: Test child sending info (1986 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3137 ms) [ok]: corrupt payload: hash duplicate records (223 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (101 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (472 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: corrupt payload: hash empty zipmap (223 ms) [ok]: AOF enable/disable auto gc (205 ms) [ok]: failed bgsave prevents writes (197 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (120 ms) [ok]: AOF can produce consecutive sequence number after reload (67 ms) [ok]: PSYNC2 #3899 regression: setup (1003 ms) [33/92 done]: integration/rdb (6 seconds) Testing integration/psync2-master-restart [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (120 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: BLMOVE (left, right) replication, list exists (1002 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: Generate timestamp annotations in AOF (317 ms) [ok]: Successfully load AOF which has timestamp annotations inside (0 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (224 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (319 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (224 ms) [ok]: Truncate AOF to specific timestamp (380 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1125 ms) [34/92 done]: integration/replication-buffer (11 seconds) Testing integration/failover [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (223 ms) [ok]: AOF will trigger limit when AOFRW fails many times (600 ms) [ok]: corrupt payload: fuzzer findings - hash crash (223 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (17761 ms) [ok]: BLMOVE (right, left) replication, list exists (1002 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: setup replication for following tests (102 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: MIGRATE can correctly transfer large values (4252 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (223 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (110 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: MIGRATE can correctly transfer hashes (213 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (215 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (222 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (1069 ms) [ok]: corrupt payload: fuzzer findings - empty intset (223 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: EVAL can process writes from AOF in read-only replicas (219 ms) [ok]: Test redis-check-aof for old style resp AOF (5 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (4 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (6 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (4 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (9 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (5 ms) [ok]: failover command to specific replica works (817 ms) [ok]: MIGRATE timeout actually works (630 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (223 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (3 ms) [ok]: BLMOVE (right, right) replication, list exists (1002 ms) [35/92 done]: integration/aof (10 seconds) Testing integration/redis-cli [ok]: MIGRATE can migrate multiple keys at once (224 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (224 ms) [ok]: BLPOP followed by role change, issue #2473 (203 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (214 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (223 ms) [ok]: Interactive CLI: Bulk reply (60 ms) [ok]: Interactive CLI: Multi-bulk reply (60 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (223 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1113 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (212 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (0 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (0 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (223 ms) [ok]: failover command to any replica works (916 ms) [ok]: FLUSHDB / FLUSHALL should replicate (96 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (222 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Interactive CLI: Parsing quotes (413 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2040 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (224 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (223 ms) [36/92 done]: unit/dump (22 seconds) Testing integration/redis-benchmark [37/92 done]: integration/aof-multi-part (9 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (121 ms) [ok]: failover to a replica with force works (416 ms) [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (3 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: benchmark: full test suite (55 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (224 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7852 ms) [ok]: Interactive CLI: Subscribed mode (596 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (120 ms) [ok]: failover with timeout aborts if replica never catches up (540 ms) [ok]: failovers can be aborted (13 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (224 ms) [ok]: benchmark: multi-thread set,get (507 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (413 ms) [ok]: Non-interactive TTY CLI: Status reply (1 ms) [ok]: Non-interactive TTY CLI: Integer reply (2 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (13 ms) [ok]: Non-interactive non-TTY CLI: Status reply (1 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (2 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: benchmark: pipelined full set,get (80 ms) [ok]: benchmark: arbitrary command (4 ms) [ok]: corrupt payload: OOM in rdbGenericLoadStringObject (222 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (52 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (10 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: benchmark: keyspace length (60 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (7 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (2 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (7 ms) [ok]: corrupt payload: fuzzer findings - OOM in dictExpand (214 ms) [38/92 done]: integration/redis-benchmark (2 seconds) Testing unit/pubsub [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9247 ms) [ok]: failover aborts if target rejects sync request (517 ms) [ok]: dismiss all data types memory (1108 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (0 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1835 ms) [ok]: PubSub messages with CLIENT REPLY OFF (87 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (0 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (223 ms) [ok]: Keyspace notifications: we receive keyspace notifications (41 ms) [ok]: Keyspace notifications: we receive keyevent notifications (44 ms) [ok]: Keyspace notifications: we can receive both kind of events (0 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (0 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: dismiss client output buffer (207 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (120 ms) [ok]: Keyspace notifications: expired events (triggered expire) (201 ms) [ok]: dismiss client query buffer (202 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (223 ms) [ok]: Keyspace notifications: expired events (background expire) (108 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (0 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [39/92 done]: unit/pubsub (0 seconds) Testing unit/pubsubshard [ok]: corrupt payload: fuzzer findings - valgrind invalid read (223 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: PubSubShard with CLIENT REPLY OFF (85 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (214 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5000 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (120 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [40/92 done]: integration/failover (5 seconds) Testing unit/slowlog [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (223 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: Dumping an RDB - functions only: no (1542 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - max entries is correctly handled (5 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (223 ms) [ok]: dismiss replication backlog (1230 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (0 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (2 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: corrupt payload: fuzzer findings - huge string (222 ms) [41/92 done]: integration/dismiss-mem (3 seconds) Testing unit/scripting [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (200 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (224 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1830 ms) [ok]: Make the old master a replica of the new one and check conditions (1003 ms) [42/92 done]: unit/pubsubshard (2 seconds) Testing unit/functions [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (121 ms) [ok]: Dumping an RDB - functions only: yes (760 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (1 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (1 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: Scan mode (51 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (251 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (2 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [43/92 done]: integration/psync2-master-restart (7 seconds) Testing unit/maxmemory [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (224 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (36 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (121 ms) [ok]: SLOWLOG - can be disabled (401 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: FUNCTION - test function kill (402 ms) [44/92 done]: unit/slowlog (1 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (223 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (313 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (0 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (2 ms) [ok]: EVAL does not leak in the Lua stack (664 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: CLIENT KILL close the client connection during bgsave (94 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (223 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (42 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: Script return recursive object (113 ms) [ok]: FUNCTION - test script kill not working on function (403 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR log blocked command only once (2 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: Script check unpack with massive arguments (45 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - empty zset (213 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (466 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (60 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (223 ms) [ok]: FUNCTION - test function kill not working on eval (402 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9694 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (238 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (214 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (37 ms) [ok]: Timedout script does not cause a false dead client (35 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 75189) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (224 ms) [ok]: Timedout script link is still usable after Lua returns (58 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (0 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: CONFIG save params special case handled properly (895 ms) [ok]: CONFIG sanity (13 ms) [ok]: Replication: commands with many arguments (issue #1221) (9589 ms) [ok]: Disconnecting the replica from master instance (101 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: spopwithcount rewrite srem command (72 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (224 ms) [ok]: CONFIG REWRITE sanity (183 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (120 ms) [ok]: Timedout scripts and unblocked command (356 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (118 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: Connecting as a replica (2164 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (901 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (214 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (589 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (0 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (224 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (134 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (656 ms) [ok]: CONFIG SET with multiple args (0 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: CONFIG GET hidden configs (2 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: redis-server command line arguments - error cases (57 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (224 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (339 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (255 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (214 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (1 ms) [ok]: LIBRARIES - malicious access test (0 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (215 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Data divergence can happen under default conditions (2 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: Piping raw protocol (855 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (8 ms) [ok]: DUMP RESTORE with -X option (8 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (222 ms) [45/92 done]: integration/redis-cli (8 seconds) Testing unit/introspection-2 [ok]: redis-server command line arguments - wrong usage that we support anyway (224 ms) [46/92 done]: integration/replication-4 (22 seconds) Testing unit/limits [ok]: corrupt payload: fuzzer findings - empty set listpack (223 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (220 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (224 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (215 ms) [47/92 done]: integration/corrupt-dump (15 seconds) Testing unit/obuf-limits [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (1 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (1 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (216 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (224 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (0 ms) [ok]: FUNCTION - redis version api (1 ms) [ok]: FUNCTION - function stats (0 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (1 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (231 ms) [48/92 done]: unit/functions (3 seconds) Testing unit/bitops [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (209 ms) [ok]: BITCOUNT fuzzing without start/end (203 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3515 ms) [ok]: Check if maxclients works refusing connections (905 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (303 ms) [49/92 done]: unit/limits (1 seconds) Testing unit/bitfield [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: BITFIELD signed overflow sat (1 ms) [ok]: BITCOUNT fuzzing with start/end (394 ms) [ok]: BITCOUNT with start, end (0 ms) [ok]: BITCOUNT syntax error #1 (1 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (298 ms) [ok]: BITFIELD overflow detection fuzzing (140 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: redis-server command line arguments - save with empty input (1078 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: BITOP and fuzzing (226 ms) [ok]: BITFIELD overflow wrap fuzzing (187 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (2 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (214 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (319 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: BITOP or fuzzing (217 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (167 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (13 ms) [ok]: SCRIPTING FLUSH ASYNC (5 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: BITOP xor fuzzing (201 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: BITOP NOT fuzzing (22 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (321 ms) [ok]: cannot modify protected configuration - local (4 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (126 ms) [50/92 done]: unit/bitfield (1 seconds) Testing unit/geo [ok]: EVAL does not leak in the Lua stack (327 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (0 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (1 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (1 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (0 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (0 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (174 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (52 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (312 ms) [ok]: MGET: mget shouldn't be propagated in Lua (101 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (141 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: Test replication with blocking lists and sorted sets operations (25003 ms) [51/92 done]: unit/bitops (2 seconds) Testing unit/memefficiency [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (283 ms) [52/92 done]: integration/block-repl (27 seconds) Testing unit/hyperloglog [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (320 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Script return recursive object (114 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (338 ms) [ok]: Memory efficiency with values in range 32 (326 ms) [ok]: Script check unpack with massive arguments (45 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (0 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: config during loading (828 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: HyperLogLog self test passes (381 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: Memory efficiency with values in range 64 (288 ms) [ok]: CONFIG REWRITE handles rename-command properly (341 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (387 ms) [ok]: HyperLogLogs are promote from sparse to dense (381 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (401 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (32 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (34 ms) [ok]: Memory efficiency with values in range 128 (312 ms) [ok]: Timedout script does not cause a false dead client (35 ms) [ok]: Timedout script link is still usable after Lua returns (57 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (359 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9412 ms) [ok]: Client output buffer hard limit is enforced (3562 ms) [ok]: Memory efficiency with values in range 1024 (357 ms) [ok]: CONFIG REWRITE handles alias config properly (663 ms) [53/92 done]: unit/introspection (7 seconds) Testing unit/lazyfree [ok]: Timedout scripts and unblocked command (355 ms) [ok]: HyperLogLog sparse encoding stress test (597 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (201 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: UNLINK can reclaim memory in background (246 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (267 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9999 ms) [54/92 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/wait [ok]: lazy free a stream with all types of metadata (48 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2913 ms) [55/92 done]: unit/lazyfree (1 seconds) Testing unit/pause [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: Memory efficiency with values in range 16384 (980 ms) [56/92 done]: unit/memefficiency (3 seconds) Testing unit/querybuf [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (345 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (0 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: Test both active and passive expires are skipped during client pause (101 ms) [ok]: Test that client pause starts at the end of a transaction (0 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (0 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (0 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [57/92 done]: integration/psync2-pingoff (17 seconds) Testing unit/tls [58/92 done]: unit/pause (1 seconds) Testing unit/tracking [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (1 ms) [ok]: Clients can enable the BCAST mode with prefixes (0 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (0 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [59/92 done]: unit/tls (0 seconds) Testing unit/oom-score-adj [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1082 ms) [ok]: CONFIG SET oom-score-adj works as expected (9 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/92 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (111 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: Temp rdb will be deleted in signal handle (94 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (95 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (0 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (0 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (0 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (0 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: BCAST with prefix collisions throw errors (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (97 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (0 ms) [ok]: Tracking invalidation message of eviction keys should be before response (2 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (2 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (0 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (1 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (3 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (1 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (0 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (0 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1102 ms) [ok]: Tracking gets notification on tracking table key eviction (77 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (1 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (1 ms) [61/92 done]: unit/shutdown (1 seconds) Testing unit/networking [62/92 done]: unit/introspection-2 (7 seconds) Testing unit/client-eviction [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (200 ms) [ok]: Tracking info is correct (2 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (1 ms) [ok]: Regression test for #11715 (1 ms) [ok]: RESP3 based basic invalidation with client reply off (1 ms) [ok]: CONFIG SET port number (223 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 150720) (0 ms) [ok]: client evicted due to large argv (78 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: RESP2 based basic invalidation with client reply off (44 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (1 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: client evicted due to large query buf (24 ms) [ok]: client evicted due to percentage of maxmemory (7 ms) [ok]: no-writes shebang flag on replica (103 ms) [ok]: client evicted due to large multi buf (129 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: CONFIG SET bind address (224 ms) [ok]: query buffer resized correctly (2556 ms) [ok]: not enough good replicas (0 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (3751 ms) [ok]: query buffer resized correctly when not idle (26 ms) [ok]: client evicted due to watched key list (89 ms) [63/92 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: SORT adds integer field to list (0 ms) [64/92 done]: unit/violations (0 seconds) Testing unit/replybufsize [ok]: CONFIG SET bind-source-addr (517 ms) [ok]: not enough good replicas state change during long script (520 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (4 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (7 ms) [ok]: client evicted due to pubsub subscriptions (653 ms) [ok]: Consistent eval error reporting (6 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: client evicted due to tracking redirection (36 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [65/92 done]: unit/scripting (12 seconds) Testing unit/cluster/announced-endpoints [ok]: Default bind address configuration handling (207 ms) [ok]: Protected mode works as expected (3 ms) [66/92 done]: unit/networking (1 seconds) Testing unit/cluster/misc [ok]: verify reply buffer limits (652 ms) [ok]: WAITAOF local copy before fsync (96 ms) [67/92 done]: unit/replybufsize (1 seconds) Testing unit/cluster/cli Port 28136 was already busy, trying another port... [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (15244 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: client evicted due to client tracking prefixes (1282 ms) [ok]: client evicted due to output buf (10 ms) [ok]: client no-evict on (71 ms) [ok]: client no-evict off (23 ms) [ok]: WAITAOF local copy everysec (1202 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: avoid client eviction when client is freed by output buffer limit (54 ms) [ok]: WAITAOF local if AOFRW was postponed (300 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (14 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: ziplist implementation: value encoding and backlink (12311 ms) [ok]: WAITAOF replica copy before fsync (85 ms) [ok]: query buffer resized correctly with fat argv (2978 ms) [68/92 done]: unit/querybuf (6 seconds) Testing unit/cluster/scripting [ok]: decrease maxmemory-clients causes client eviction (507 ms) [ok]: evict clients only until below limit (79 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (201 ms) [ok]: Key lazy expires during key migration (12 ms) [ok]: Coverage: Basic cluster commands (2 ms) [ok]: Create 3 node cluster (2012 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (4 ms) [ok]: Verify command got unblocked after resharding (56 ms) [ok]: Wait for cluster to be stable (8 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (3 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: evict clients in right order (large to small) (91 ms) [ok]: WAITAOF replica copy everysec (711 ms) [ok]: Test change cluster-announce-bus-port at runtime (201 ms) [69/92 done]: integration/psync2-reg (22 seconds) Testing unit/cluster/hostnames [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: client total memory grows during client no-evict (125 ms) [70/92 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: client total memory grows during maxmemory-clients disabled (125 ms) [71/92 done]: unit/client-eviction (5 seconds) Testing unit/cluster/multi-slot-operations [72/92 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: WAITAOF replica copy everysec with AOFRW (1003 ms) Port 28140 was already busy, trying another port... [ok]: Kill a cluster node and wait for fail state (1263 ms) [ok]: Verify command got unblocked after cluster failure (58 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5021 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (0 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [73/92 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/links [ok]: No response for single command if client output buffer hard limit is enforced (112 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9410 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1047 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (11 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (12 ms) [ok]: Obuf limit, KEYS stopped mid-run (45 ms) [74/92 done]: unit/obuf-limits (14 seconds) Testing unit/cluster/cluster-response-tls [75/92 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Set cluster human announced nodename and let it propagate (103 ms) [ok]: Set cluster hostnames and verify they are propagated (106 ms) [ok]: Continuous slots distribution (6 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2010 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (6 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (102 ms) [ok]: WAITAOF replica copy appendfsync always (0 ms) [ok]: Update hostnames and make sure they are all eventually propagated (206 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (206 ms) [76/92 done]: unit/cluster/multi-slot-operations (2 seconds) Testing unit/cluster/sharded-pubsub [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (105 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (105 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (103 ms) [ok]: WAITAOF replica copy if replica is blocked (899 ms) [77/92 done]: unit/cluster/slot-ownership (3 seconds) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1001 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3002 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 209457) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec (1 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (0 ms) [ok]: WAITAOF on promoted replica (601 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: Human nodenames are visible in log messages (3516 ms) [ok]: ziplist implementation: encoding stress testing (7146 ms) [ok]: Each node has two links with each peer (3 ms) [ok]: Validate cluster links format (1 ms) [78/92 done]: unit/type/list-3 (47 seconds) [79/92 done]: unit/cluster/human-announced-nodename (7 seconds) [80/92 done]: unit/cluster/sharded-pubsub (4 seconds) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3616 ms) [ok]: Test restart will keep hostname information (174 ms) [ok]: Test hostname validation (1 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2003 ms) [81/92 done]: unit/cluster/hostnames (8 seconds) [ok]: Verify that single primary marks replica as failed (3130 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (401 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: GEOSEARCH fuzzy test - byradius (17967 ms) [ok]: WAITAOF master isn't configured to do AOF (1001 ms) [ok]: WAITAOF replica isn't configured to do AOF (102 ms) [ok]: Migrate the last slot away from a node using redis-cli (3827 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6289 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (901 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: WAITAOF master sends PING after last write (1200 ms) [ok]: redis-cli --cluster create with cluster-port (1918 ms) [ok]: WAITAOF master client didn't send any write command (1202 ms) [ok]: redis-cli --cluster add-node with cluster-port (1130 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 274945) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [82/92 done]: unit/cluster/cli (15 seconds) [ok]: WAITAOF master client didn't send any command (1201 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (14900 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Disconnect link when send buffer limit reached (9627 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: Link memory increases with publishes (591 ms) [ok]: Verify that multiple primaries mark replica as failed (6360 ms) [83/92 done]: unit/cluster/failure-marking (14 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3328 ms) [ok]: Link memory resets after publish messages flush (447 ms) [84/92 done]: unit/cluster/links (15 seconds) [ok]: AOF rewrite during write load: RDB preamble=no (37400 ms) [ok]: Turning off AOF kills the background writing child if any (104 ms) [ok]: AOF rewrite of list with listpack encoding, string data (102 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (108 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7838 ms) [ok]: AOF rewrite of list with listpack encoding, int data (102 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (104 ms) [ok]: AOF rewrite of set with intset encoding, string data (102 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (111 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: AOF rewrite of set with intset encoding, int data (102 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (100 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (119 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (54 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (110 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2327 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (103 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (129 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (103 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (118 ms) [ok]: AOF rewrite functions (52 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (209 ms) [ok]: BGREWRITEAOF is refused if already in progress (7 ms) [85/92 done]: unit/aofrw (58 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1326 ms) [ok]: GEOSEARCH fuzzy test - bybox (11839 ms) [ok]: GEOSEARCH box edges fuzzy test (30 ms) [86/92 done]: unit/geo (30 seconds) [ok]: setup replication for following tests (101 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 338128) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (217 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (682 ms) [87/92 done]: unit/wait (28 seconds) [88/92 done]: integration/psync2 (45 seconds) [ok]: slave buffer are counted correctly (30179 ms) [ok]: replica buffer don't induce eviction (4274 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9383 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (150 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: client tracking don't cause eviction feedback loop (1253 ms) [ok]: propagation with eviction (97 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: lru/lfu value of the key just added (0 ms) [89/92 done]: unit/maxmemory (45 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (16060 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (43449 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9390 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (41 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3242 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1266 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (0 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (931 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [90/92 done]: unit/hyperloglog (50 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (14670 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6344 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7872 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (19423 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (425 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9422 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (338 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (860 ms) [ok]: Busy script during async loading (860 ms) [ok]: Blocked commands and configs during async-loading (429 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 44800 to exit... Waiting for process 44800 to exit... Waiting for process 44800 to exit... Waiting for process 44800 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9503 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (186 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6310 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7941 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (1 ms) [ok]: diskless loading short read (30277 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9455 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless no replicas drop during rdb pipe (6286 ms) [ok]: diskless slow replicas drop during rdb pipe (2376 ms) [ok]: diskless fast replicas drop during rdb pipe (4812 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10534 ms) [91/92 done]: integration/replication-psync (155 seconds) [ok]: diskless all replicas drop during rdb pipe (1648 ms) [ok]: diskless timeout replicas drop during rdb pipe (5922 ms) [ok]: diskless replication child being killed is collected (1446 ms) [ok]: replication child dies when parent is killed - diskless: yes (1150 ms) [ok]: replication child dies when parent is killed - diskless: no (1751 ms) [ok]: diskless replication read pipe cleanup (856 ms) [ok]: replicaof right after disconnection (1830 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (921 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms) [ok]: Discard cache master before loading transferred RDB when full sync (103 ms) [ok]: replica can handle EINTR if use diskless load (634 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (98 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (146 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (53 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (103 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (111 ms) [92/92 done]: integration/replication (174 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [92/92 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [92/92 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [92/92 done]: bitops-large-memory (1 seconds) Testing solo test [92/92 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [92/92 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/info-command 0 seconds - unit/type/incr 0 seconds - unit/printver 0 seconds - unit/protocol 1 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 0 seconds - unit/quit 3 seconds - unit/type/hash 2 seconds - unit/acl 5 seconds - unit/type/stream-cgroups 0 seconds - unit/acl-v2 6 seconds - unit/sort 6 seconds - unit/scan 4 seconds - unit/multi 7 seconds - unit/type/string 6 seconds - unit/other 9 seconds - unit/type/list-2 10 seconds - unit/type/set 6 seconds - unit/latency-monitor 13 seconds - unit/type/list 0 seconds - integration/aof-race 13 seconds - unit/expire 8 seconds - integration/replication-2 14 seconds - unit/type/stream 11 seconds - integration/replication-3 7 seconds - integration/shutdown 0 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 18 seconds - unit/type/zset 6 seconds - integration/rdb 11 seconds - integration/replication-buffer 10 seconds - integration/aof 22 seconds - unit/dump 9 seconds - integration/aof-multi-part 2 seconds - integration/redis-benchmark 0 seconds - unit/pubsub 5 seconds - integration/failover 3 seconds - integration/dismiss-mem 2 seconds - unit/pubsubshard 7 seconds - integration/psync2-master-restart 1 seconds - unit/slowlog 8 seconds - integration/redis-cli 22 seconds - integration/replication-4 15 seconds - integration/corrupt-dump 3 seconds - unit/functions 1 seconds - unit/limits 1 seconds - unit/bitfield 2 seconds - unit/bitops 27 seconds - integration/block-repl 7 seconds - unit/introspection 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/lazyfree 3 seconds - unit/memefficiency 17 seconds - integration/psync2-pingoff 1 seconds - unit/pause 0 seconds - unit/tls 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 7 seconds - unit/introspection-2 2 seconds - unit/tracking 0 seconds - unit/violations 12 seconds - unit/scripting 1 seconds - unit/networking 1 seconds - unit/replybufsize 6 seconds - unit/querybuf 22 seconds - integration/psync2-reg 3 seconds - unit/cluster/announced-endpoints 5 seconds - unit/client-eviction 4 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 14 seconds - unit/obuf-limits 0 seconds - unit/cluster/cluster-response-tls 2 seconds - unit/cluster/multi-slot-operations 3 seconds - unit/cluster/slot-ownership 47 seconds - unit/type/list-3 7 seconds - unit/cluster/human-announced-nodename 4 seconds - unit/cluster/sharded-pubsub 8 seconds - unit/cluster/hostnames 15 seconds - unit/cluster/cli 14 seconds - unit/cluster/failure-marking 15 seconds - unit/cluster/links 58 seconds - unit/aofrw 30 seconds - unit/geo 28 seconds - unit/wait 45 seconds - integration/psync2 45 seconds - unit/maxmemory 50 seconds - unit/hyperloglog 155 seconds - integration/replication-psync 174 seconds - integration/replication 0 seconds - list-large-memory 0 seconds - set-large-memory 1 seconds - bitops-large-memory 2 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' >>> redis-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/init.d' >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.7-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 1.7 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.7-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redis*: Package size: 3.5 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.7-r0.apk >>> redis: Build complete at Fri, 10 Jan 2025 16:16:34 +0000 elapsed time 0h 3m 20s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250110.161315) (2/8) Purging linux-headers (6.12.6-r0) (3/8) Purging openssl-dev (3.3.2-r4) (4/8) Purging tcl (8.6.16-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r10.trigger OK: 398 MiB in 104 packages >>> redis: Updating the community/aarch64 repository index... >>> redis: Signing the index...