>>> ginger: Building testing/ginger 2.4.0-r8 (using abuild 3.18.0_rc7-r1) started Sun, 18 Oct 2026 16:44:15 +0000
>>> ginger: Validating /home/buildozer/aports/testing/ginger/APKBUILD...
>>> ginger: Analyzing dependencies...
>>> ginger: Installing for build: build-base py3-configobj py3-pyparted wok automake autoconf libtool python3-dev gettext-dev py3-pyflakes libxslt
(  1/186) Installing libbz2 (1.0.8-r6)
(  2/186) Installing libffi (3.8.0-r0)
(  3/186) Installing xz-libs (5.8.4-r0)
(  4/186) Installing mpdecimal (4.0.1-r0)
(  5/186) Installing libpanelw (6.6_p20260822-r0)
(  6/186) Installing readline (8.3.3-r1)
(  7/186) Installing sqlite-libs (3.54.1-r0)
(  8/186) Installing python3 (3.14.8-r0)
(  9/186) Installing python3-pycache-pyc0 (3.14.8-r0)
( 10/186) Installing pyc (3.14.8-r0)
( 11/186) Installing py3-configobj-pyc (5.0.9-r2)
( 12/186) Installing python3-pyc (3.14.8-r0)
( 13/186) Installing py3-configobj (5.0.9-r2)
( 14/186) Installing libeconf (0.8.4-r0)
( 15/186) Installing libblkid (2.42.4-r3)
( 16/186) Installing device-mapper-libs (2.03.35-r8)
( 17/186) Installing libuuid (2.42.4-r3)
( 18/186) Installing parted (3.7-r0)
( 19/186) Installing py3-pyparted (3.13.0-r2)
( 20/186) Installing py3-pyparted-pyc (3.13.0-r2)
( 21/186) Installing nginx (1.30.4-r3)
  Executing nginx-1.30.4-r3.pre-install
  Executing nginx-1.30.4-r3.post-install
( 22/186) Installing logrotate (3.22.0-r0)
( 23/186) Installing py3-more-itertools (10.8.0-r1)
( 24/186) Installing py3-more-itertools-pyc (10.8.0-r1)
( 25/186) Installing py3-jaraco.classes (3.4.0-r2)
( 26/186) Installing py3-jaraco.classes-pyc (3.4.0-r2)
( 27/186) Installing py3-jaraco.functools (4.6.0-r0)
( 28/186) Installing py3-jaraco.functools-pyc (4.6.0-r0)
( 29/186) Installing py3-cheroot (11.1.2-r1)
( 30/186) Installing py3-cheroot-pyc (11.1.2-r1)
( 31/186) Installing py3-autocommand (2.2.2-r5)
( 32/186) Installing py3-autocommand-pyc (2.2.2-r5)
( 33/186) Installing py3-editables (0.6-r0)
( 34/186) Installing py3-editables-pyc (0.6-r0)
( 35/186) Installing py3-parsing (3.3.3-r0)
( 36/186) Installing py3-parsing-pyc (3.3.3-r0)
( 37/186) Installing py3-packaging (26.2-r0)
( 38/186) Installing py3-packaging-pyc (26.2-r0)
( 39/186) Installing py3-pathspec (1.1.1-r0)
( 40/186) Installing py3-pathspec-pyc (1.1.1-r0)
( 41/186) Installing py3-pluggy (1.6.0-r1)
( 42/186) Installing py3-pluggy-pyc (1.6.0-r1)
( 43/186) Installing py3-trove-classifiers (2026.9.21.13-r0)
( 44/186) Installing py3-trove-classifiers-pyc (2026.9.21.13-r0)
( 45/186) Installing py3-hatchling (1.31.0-r0)
( 46/186) Installing py3-hatchling-pyc (1.31.0-r0)
( 47/186) Installing py3-bracex (3.0.1-r0)
( 48/186) Installing py3-bracex-pyc (3.0.1-r0)
( 49/186) Installing py3-typing-extensions (4.16.0-r0)
( 50/186) Installing py3-typing-extensions-pyc (4.16.0-r0)
( 51/186) Installing py3-typeguard (4.6.0-r0)
( 52/186) Installing py3-typeguard-pyc (4.6.0-r0)
( 53/186) Installing py3-inflect (7.5.0-r1)
( 54/186) Installing py3-inflect-pyc (7.5.0-r1)
( 55/186) Installing py3-jaraco.context (6.1.2-r0)
( 56/186) Installing py3-jaraco.context-pyc (6.1.2-r0)
( 57/186) Installing py3-annotated-doc (0.0.4-r1)
( 58/186) Installing py3-annotated-doc-pyc (0.0.4-r1)
( 59/186) Installing py3-click (8.4.2-r0)
( 60/186) Installing py3-click-pyc (8.4.2-r0)
( 61/186) Installing py3-attrs (26.1.0-r0)
( 62/186) Installing py3-attrs-pyc (26.1.0-r0)
( 63/186) Installing py3-mdurl (0.1.2-r4)
( 64/186) Installing py3-mdurl-pyc (0.1.2-r4)
( 65/186) Installing py3-markdown-it-py (3.0.0-r2)
( 66/186) Installing py3-markdown-it-py-pyc (3.0.0-r2)
( 67/186) Installing py3-pygments (2.21.0-r0)
( 68/186) Installing py3-pygments-pyc (2.21.0-r0)
( 69/186) Installing py3-rich (15.0.0-r1)
( 70/186) Installing py3-rich-pyc (15.0.0-r1)
( 71/186) Installing py3-shellingham (1.5.4-r2)
( 72/186) Installing py3-shellingham-pyc (1.5.4-r2)
( 73/186) Installing py3-typer (0.24.1-r1)
( 74/186) Installing py3-typer-pyc (0.24.1-r1)
( 75/186) Installing py3-jaraco.text (4.2.0-r0)
( 76/186) Installing py3-jaraco.text-pyc (4.2.0-r0)
( 77/186) Installing py3-jaraco.collections (5.2.1-r1)
( 78/186) Installing py3-jaraco.collections-pyc (5.2.1-r1)
( 79/186) Installing py3-dateutil (2.9.0-r4)
( 80/186) Installing py3-dateutil-pyc (2.9.0-r4)
( 81/186) Installing py3-tz (2026.4-r0)
( 82/186) Installing py3-tz-pyc (2026.4-r0)
( 83/186) Installing py3-tempora (5.13.0-r0)
( 84/186) Installing py3-tempora-pyc (5.13.0-r0)
( 85/186) Installing py3-portend (3.2.0-r2)
( 86/186) Installing py3-portend-pyc (3.2.0-r2)
( 87/186) Installing py3-zc.lockfile (4.0-r1)
( 88/186) Installing py3-zc.lockfile-pyc (4.0-r1)
( 89/186) Installing py3-cherrypy (18.10.0-r1)
( 90/186) Installing py3-cherrypy-pyc (18.10.0-r1)
( 91/186) Installing py3-rpds-py (0.30.0-r2)
( 92/186) Installing py3-rpds-py-pyc (0.30.0-r2)
( 93/186) Installing py3-referencing (0.37.0-r1)
( 94/186) Installing py3-referencing-pyc (0.37.0-r1)
( 95/186) Installing py3-jsonschema-specifications (2025.9.1-r2)
( 96/186) Installing py3-jsonschema-specifications-pyc (2025.9.1-r2)
( 97/186) Installing py3-jsonschema (4.26.0-r0)
( 98/186) Installing py3-jsonschema-pyc (4.26.0-r0)
( 99/186) Installing py3-asn1 (0.6.4-r0)
(100/186) Installing py3-asn1-pyc (0.6.4-r0)
(101/186) Installing py3-asn1-modules (0.4.2-r1)
(102/186) Installing py3-asn1-modules-pyc (0.4.2-r1)
(103/186) Installing gdbm (1.26-r0)
(104/186) Installing libsasl (2.1.28-r9)
(105/186) Installing libldap (2.6.15-r0)
(106/186) Installing py3-ldap (3.4.8-r0)
(107/186) Installing py3-ldap-pyc (3.4.8-r0)
(108/186) Installing py3-psutil (7.2.2-r0)
(109/186) Installing py3-psutil-pyc (7.2.2-r0)
(110/186) Installing py3-m2crypto (0.51.0-r0)
(111/186) Installing py3-m2crypto-pyc (0.51.0-r0)
(112/186) Installing py3-cheetah (3.3.3-r2)
(113/186) Installing py3-cheetah-pyc (3.3.3-r2)
(114/186) Installing libxml2 (2.13.9-r2)
(115/186) Installing augeas-libs (1.14.1-r0)
(116/186) Installing py3-cparser (3.0-r1)
(117/186) Installing py3-cparser-pyc (3.0-r1)
(118/186) Installing py3-cffi (2.0.0-r0)
(119/186) Installing py3-cffi-pyc (2.0.0-r0)
(120/186) Installing py3-augeas (1.2.0-r1)
(121/186) Installing py3-augeas-pyc (1.2.0-r1)
(122/186) Installing skalibs-libs (2.15.1.0-r0)
(123/186) Installing utmps-libs (0.1.3.4-r0)
(124/186) Installing linux-pam (1.7.1-r4)
(125/186) Installing py3-six (1.17.0-r1)
(126/186) Installing py3-six-pyc (1.17.0-r1)
(127/186) Installing py3-pam (2.0.2-r3)
(128/186) Installing py3-pam-pyc (2.0.2-r3)
(129/186) Installing libxslt (1.1.43-r3)
(130/186) Installing py3-lxml (6.1.1-r0)
(131/186) Installing py3-lxml-pyc (6.1.1-r0)
(132/186) Installing libcap-ng (0.9.6-r0)
(133/186) Installing libintl (1.0-r0)
(134/186) Installing libmount (2.42.4-r3)
(135/186) Installing glib (2.90.0-r0)
(136/186) Installing nettle (3.10.2-r0)
(137/186) Installing libtasn1 (4.21.0-r0)
(138/186) Installing p11-kit (0.26.2-r1)
(139/186) Installing gnutls (3.8.13-r0)
(140/186) Installing json-c (0.19-r1)
(141/186) Installing libnl3 (3.12.0-r0)
(142/186) Installing libssh2 (1.11.1-r3)
(143/186) Installing libtirpc-conf (1.3.5-r1)
(144/186) Installing krb5-conf (1.0-r2)
(145/186) Installing libcom_err (1.47.4-r0)
(146/186) Installing keyutils-libs (1.6.3-r4)
(147/186) Installing libverto (0.3.2-r2)
(148/186) Installing krb5-libs (1.22.2-r1)
(149/186) Installing libtirpc (1.3.5-r1)
(150/186) Installing libvirt-libs (12.7.0-r0)
(151/186) Installing py3-libvirt (12.7.0-r0)
(152/186) Installing py3-libvirt-pyc (12.7.0-r0)
(153/186) Installing yaml (0.2.5-r2)
(154/186) Installing py3-yaml (6.0.3-r2)
(155/186) Installing py3-yaml-pyc (6.0.3-r2)
(156/186) Installing libpng (1.6.59-r0)
(157/186) Installing freetype (2.14.3-r0)
(158/186) Installing fontconfig (2.18.1-r0)
(159/186) Installing libfontenc (1.1.9-r0)
(160/186) Installing mkfontscale (1.2.4-r0)
(161/186) Installing font-opensans (0_git20210927-r1)
(162/186) Installing font-awesome-free (7.3.1-r0)
(163/186) Installing wok (3.0.0-r7)
(164/186) Installing wok-pyc (3.0.0-r7)
(165/186) Installing perl (5.44.0-r0)
(166/186) Installing automake (1.18.1-r1)
(167/186) Installing m4 (1.4.21-r0)
(168/186) Installing autoconf (2.73-r0)
(169/186) Installing diffutils (3.12-r0)
(170/186) Installing libltdl (2.6.2-r1)
(171/186) Installing libtool (2.6.2-r1)
(172/186) Installing python3-dev (3.14.8-r0)
(173/186) Installing xz (5.8.4-r0)
(174/186) Installing gettext-asprintf (1.0-r0)
(175/186) Installing gettext-libs (1.0-r0)
(176/186) Installing gettext-envsubst (1.0-r0)
(177/186) Installing gettext (1.0-r0)
(178/186) Installing gettext-dev (1.0-r0)
(179/186) Installing py3-pyflakes (4.0.1-r0)
(180/186) Installing py3-pyflakes-pyc (4.0.1-r0)
(181/186) Installing .makedepends-ginger (20261018.164415)
(182/186) Installing nginx-openrc (1.30.4-r3)
(183/186) Installing logrotate-openrc (3.22.0-r0)
(184/186) Installing perl-error (0.17030-r0)
(185/186) Installing perl-git (2.56.0-r0)
(186/186) Installing git-perl (2.56.0-r0)
Executing busybox-1.38.0-r7.trigger
Executing glib-2.90.0-r0.trigger
Executing fontconfig-2.18.1-r0.trigger
Executing mkfontscale-1.2.4-r0.trigger
OK: 595.6 MiB in 291 packages
>>> ginger: Cleaning up srcdir
>>> ginger: Cleaning up pkgdir
>>> ginger: Cleaning up tmpdir
>>> ginger: Fetching https://distfiles.alpinelinux.org/distfiles/edge/ginger-2.4.0.tar.gz
/var/cache/distfiles/edge/ginger-2.4.0.tar.gz: OK
>>> ginger: Fetching https://distfiles.alpinelinux.org/distfiles/edge/ginger-2.4.0.tar.gz
/var/cache/distfiles/edge/ginger-2.4.0.tar.gz: OK
>>> ginger: Unpacking /var/cache/distfiles/edge/ginger-2.4.0.tar.gz...
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: running: autopoint --force
Copying file ABOUT-NLS
Copying file build-aux/config.rpath
Copying file m4/codeset.m4
Copying file m4/fcntl-o.m4
Copying file m4/glibc2.m4
Copying file m4/glibc21.m4
Copying file m4/intdiv0.m4
Copying file m4/intl.m4
Copying file m4/intldir.m4
Copying file m4/intmax.m4
Copying file m4/inttypes-pri.m4
Copying file m4/inttypes_h.m4
Copying file m4/lcmessage.m4
Copying file m4/lock.m4
Copying file m4/longlong.m4
Copying file m4/printf-posix.m4
Copying file m4/size_max.m4
Copying file m4/stdint_h.m4
Copying file m4/threadlib.m4
Copying file m4/uintmax_t.m4
Copying file m4/visibility.m4
Copying file m4/wchar_t.m4
Copying file m4/wint_t.m4
Copying file m4/xsize.m4
Copying file po/Makefile.in.in
Copying file po/Makevars.template
Copying file po/Rules-quot
autoreconf: running: aclocal --force --install -I m4
aclocal: overwriting 'm4/nls.m4' with '/usr/share/aclocal/nls.m4'
aclocal: overwriting 'm4/pkg.m4' with '/usr/share/aclocal/pkg.m4'
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: configure.ac: not running autopoint a second time
autoreconf: running: aclocal --force --install -I m4 -I m4
autoreconf: running: /usr/bin/autoconf --force
autoreconf: configure.ac: not running autoheader: no config headers
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:42: installing 'build-aux/compile'
configure.ac:42: installing 'build-aux/config.guess'
configure.ac:42: installing 'build-aux/config.sub'
configure.ac:35: installing 'build-aux/install-sh'
configure.ac:35: installing 'build-aux/missing'
Makefile.am:22: installing 'build-aux/py-compile'
autoreconf: 'build-aux/config.sub' is updated
autoreconf: 'build-aux/config.guess' is updated
autoreconf: configure.ac: not running make: --make not given
autoreconf: Leaving directory '.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether sleep supports fractional seconds... yes
checking filesystem timestamp resolution... 2
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking xargs -n works... yes
checking whether UID '1000' is supported by ustar format... yes
checking whether GID '1000' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking for a Python interpreter with version >= 2.6... python
checking for python... /usr/bin/python
checking for python version... 3.14
checking for python platform... linux
checking for GNU default python prefix... ${prefix}
checking for GNU default python exec_prefix... ${exec_prefix}
checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.14/site-packages
checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.14/site-packages
checking for pep8... /usr/bin/pep8
checking for git... /usr/bin/git
checking python module: wok... yes
checking for a sed that does not truncate output... /bin/sed
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking whether make supports the include directive... yes (GNU style)
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether cc accepts -g... yes
checking for cc option to enable C23 features... unsupported
checking for cc option to enable C11 features... none needed
checking whether cc understands -c and -o together... yes
checking dependency style of cc... none
checking build system type... armv8l-unknown-linux-musleabihf
checking host system type... armv8l-unknown-linux-musleabihf
checking for ld used by cc... /usr/armv6-alpine-linux-musleabihf/bin/ld
checking if the linker (/usr/armv6-alpine-linux-musleabihf/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking how to run the C preprocessor... cc -E
checking for egrep -e... /bin/grep -E
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... no
checking for iconv... yes
checking for working iconv... yes
checking for GNU gettext in libintl... yes
checking whether to use NLS... yes
checking where the gettext function comes from... external libintl
checking how to link with libintl... /usr/lib/libintl.so
checking for cheetah... /usr/bin/cheetah
checking python module: unittest... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for pyflakes... /usr/bin/pyflakes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
chmod: po/gen-pot: No such file or directory
config.status: creating control/Makefile
chmod: po/gen-pot: No such file or directory
config.status: creating model/Makefile
chmod: po/gen-pot: No such file or directory
config.status: creating po/Makefile.in
chmod: po/gen-pot: No such file or directory
config.status: creating po/gen-pot
config.status: creating ui/Makefile
config.status: creating ui/config/Makefile
config.status: creating ui/css/Makefile
config.status: creating ui/css/base/Makefile
config.status: creating ui/css/base/images/Makefile
config.status: creating ui/js/Makefile
config.status: creating ui/images/Makefile
config.status: creating ui/pages/Makefile
config.status: creating ui/pages/tabs/Makefile
config.status: creating ui/pages/help/Makefile
config.status: creating ui/pages/help/en_US/Makefile
config.status: creating ui/pages/help/pt_BR/Makefile
config.status: creating ui/pages/help/zh_CN/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/DEBIAN/Makefile
config.status: creating contrib/DEBIAN/control
config.status: creating contrib/ginger.spec.fedora
config.status: creating contrib/ginger.spec.suse
config.status: creating tests/Makefile
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing depfiles commands
Making all in po
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
test ! -f ./ginger.pot || \
  test -z "de_DE.gmo en_US.gmo es_ES.gmo fr_FR.gmo it_IT.gmo ja_JP.gmo ko_KR.gmo pt_BR.gmo ru_RU.gmo zh_CN.gmo zh_TW.gmo" || make de_DE.gmo en_US.gmo es_ES.gmo fr_FR.gmo it_IT.gmo ja_JP.gmo ko_KR.gmo pt_BR.gmo ru_RU.gmo zh_CN.gmo zh_TW.gmo
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
rm -f de_DE.gmo && /usr/bin/msgfmt -c --statistics --verbose -o de_DE.gmo de_DE.po
rm -f en_US.gmo && /usr/bin/msgfmt -c --statistics --verbose -o en_US.gmo en_US.po
rm -f es_ES.gmo && /usr/bin/msgfmt -c --statistics --verbose -o es_ES.gmo es_ES.po
rm -f fr_FR.gmo && /usr/bin/msgfmt -c --statistics --verbose -o fr_FR.gmo fr_FR.po
rm -f it_IT.gmo && /usr/bin/msgfmt -c --statistics --verbose -o it_IT.gmo it_IT.po
rm -f ja_JP.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ja_JP.gmo ja_JP.po
rm -f ko_KR.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ko_KR.gmo ko_KR.po
rm -f ru_RU.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ru_RU.gmo ru_RU.po
rm -f pt_BR.gmo && /usr/bin/msgfmt -c --statistics --verbose -o pt_BR.gmo pt_BR.po
rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po
rm -f zh_TW.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_TW.gmo zh_TW.po
en_US.po: 0 translated messages, 1279 untranslated messages.
de_DE.po: 84 translated messages, 1195 untranslated messages.
es_ES.po: 84 translated messages, 1195 untranslated messages.
fr_FR.po: 84 translated messages, 1195 untranslated messages.
it_IT.po: 84 translated messages, 1195 untranslated messages.
ko_KR.po: 84 translated messages, 1195 untranslated messages.
pt_BR.po: 84 translated messages, 1195 untranslated messages.
ru_RU.po: 84 translated messages, 1195 untranslated messages.
zh_CN.po: 1266 translated messages, 13 untranslated messages.
zh_TW.po: 1266 translated messages, 13 untranslated messages.
ja_JP.po: 1266 translated messages, 13 untranslated messages.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
touch stamp-po
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
Making all in control
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
Making all in model
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
sed -e 's,[@]gingerversion[@],2.3.0,g' -e 's,[@]gingerrelease[@],0,g' < ./config.py.in > config.py
make  all-am
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
Making all in ui
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
Making all in config
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
Making all in css
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
Making all in base
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
Making all in images
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
Making all in js
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
Making all in pages
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
Making all in help
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
xsltproc -o de_DE/host-admin.html dita-help.xsl de_DE/host-admin.dita
xsltproc -o en_US/host-admin.html dita-help.xsl en_US/host-admin.dita
xsltproc -o en_US/host-network.html dita-help.xsl en_US/host-network.dita
xsltproc -o en_US/host-server.html dita-help.xsl en_US/host-server.dita
xsltproc -o en_US/host-storage.html dita-help.xsl en_US/host-storage.dita
xsltproc -o en_US/host-system-services.html dita-help.xsl en_US/host-system-services.dita
xsltproc -o es_ES/host-admin.html dita-help.xsl es_ES/host-admin.dita
de_DE/host-admin.dita:21: en_US/host-admin.dita:21: parser Making all in en_US
parser warning : warning : Can't resolve URI: ..\dtd\cshelp.dtd
Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
 "..\dtd\cshelp.dtd">
                     ^
                     ^
xsltproc -o fr_FR/host-admin.html dita-help.xsl fr_FR/host-admin.dita
en_US/host-network.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
en_US/host-server.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
xsltproc -o it_IT/host-admin.html dita-help.xsl it_IT/host-admin.dita
en_US/host-storage.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
xsltproc -o ja_JP/host-admin.html dita-help.xsl ja_JP/host-admin.dita
xsltproc -o ko_KR/host-admin.html dita-help.xsl ko_KR/host-admin.dita
en_US/host-system-services.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
es_ES/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
xsltproc -o pt_BR/host-admin.html dita-help.xsl pt_BR/host-admin.dita
fr_FR/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
xsltproc -o ru_RU/host-admin.html dita-help.xsl ru_RU/host-admin.dita
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
it_IT/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
Making all in pt_BR
xsltproc -o zh_CN/host-admin.html dita-help.xsl zh_CN/host-admin.dita
ja_JP/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
xsltproc -o zh_TW/host-admin.html dita-help.xsl zh_TW/host-admin.dita
ko_KR/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
pt_BR/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
ru_RU/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
zh_CN/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
Making all in zh_CN
zh_TW/host-admin.dita:21: parser warning : Can't resolve URI: ..\dtd\cshelp.dtd
 "..\dtd\cshelp.dtd">
                     ^
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
Making all in tabs
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
Making all in images
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
Making all in contrib
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
sed						\
    -e 's|[@]PACKAGE_VERSION[@]|2.3.0|g'	\
    -e 's|[@]PACKAGE_RELEASE[@]|0|g'	\
    < make-deb.sh.in > make-deb.sh-t &&					\
    chmod a+x make-deb.sh-t &&					\
    mv make-deb.sh-t make-deb.sh
make  all-recursive
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
Making all in DEBIAN
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
Making all in tests
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
sed -e 's,[@]HAVE_PYMOD_UNITTEST[@],yes,g' -e 's,[@]PYTHON_VERSION[@],3.14,g' < ./run_tests.sh.in > run_tests.sh
chmod +x run_tests.sh
make  all-am
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
while read L && test -n "$L"; do                  \
	dir=mo/$L/LC_MESSAGES ;                       \
	/bin/mkdir -p $dir ;                             \
	ln -sf ../../../po/$L.gmo $dir/ginger.mo ;   \
done < po/LINGUAS
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
>>> ginger: Entering fakeroot...
Making install in po
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
installing de_DE.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/de_DE/LC_MESSAGES/ginger.mo
installing en_US.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/en_US/LC_MESSAGES/ginger.mo
installing es_ES.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/es_ES/LC_MESSAGES/ginger.mo
installing fr_FR.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/fr_FR/LC_MESSAGES/ginger.mo
installing it_IT.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/it_IT/LC_MESSAGES/ginger.mo
installing ja_JP.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/ja_JP/LC_MESSAGES/ginger.mo
installing ko_KR.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/ko_KR/LC_MESSAGES/ginger.mo
installing pt_BR.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/pt_BR/LC_MESSAGES/ginger.mo
installing ru_RU.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/ru_RU/LC_MESSAGES/ginger.mo
installing zh_CN.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/zh_CN/LC_MESSAGES/ginger.mo
installing zh_TW.gmo as /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/locale/zh_TW/LC_MESSAGES/ginger.mo
if test "ginger" = "gettext-tools"; then \
  /bin/mkdir -p /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/gettext/po; \
  for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot   Makevars.template; do \
    /usr/bin/install -c -m 644 ./$file \
		    /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/gettext/po/$file; \
  done; \
  for file in Makevars; do \
    rm -f /home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/gettext/po/$file; \
  done; \
else \
  : ; \
fi
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/po'
Making install in control
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/control'
 /usr/bin/install -c -m 644 __init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py config.py dasddevs.py dasdpartitions.py diskparts.py filesystems.py firmware.py fru.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volumes.py network.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgservers.py storage_devs.py swaps.py syscall.py sysmodules.py users.py vol_group.py '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/control'
Byte-compiling python modules...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py config.py dasddevs.py dasdpartitions.py diskparts.py filesystems.py firmware.py fru.py   File "/usr/lib/python3.14/site-packages/wok/plugins/ginger/control/fru.py", line 27
    print "Frus __init"
    ^^^^^^^^^^^^^^^^^^^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)?

graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volumes.py network.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgservers.py storage_devs.py swaps.py syscall.py sysmodules.py users.py vol_group.py 
Byte-compiling python modules (optimized versions) ...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py config.py dasddevs.py dasdpartitions.py diskparts.py filesystems.py firmware.py fru.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volumes.py network.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgservers.py storage_devs.py swaps.py syscall.py sysmodules.py users.py vol_group.py 
Byte-compiling python modules (more optimized versions) ...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py config.py dasddevs.py dasdpartitions.py diskparts.py filesystems.py firmware.py fru.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volumes.py network.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgservers.py storage_devs.py swaps.py syscall.py sysmodules.py users.py vol_group.py 
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/control'
Making install in model
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make  install-am
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/model'
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/model'
 /usr/bin/install -c -m 644 config.py '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/model'
 /usr/bin/install -c -m 644 __init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py dasd_utils.py dasddevs.py dasdpartitions.py diskparts.py filesystem.py firmware.py fru.py fs_utils.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volume.py mkgraph.py model.py network.py nfsshares.py nw_cfginterfaces_utils.py nw_interfaces_utils.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgserver.py '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/model'
 /usr/bin/install -c -m 644 storage_devs.py swaps.py syscall.py sysmodules.py users.py utils.py vol_group.py '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/model'
Byte-compiling python modules...
config.py 
Byte-compiling python modules...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/conf.py:97: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/conf.py:102: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
dasd_utils.py dasddevs.py dasdpartitions.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/dasdpartitions.py:97: SyntaxWarning: "\D" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\D"? A raw string is also an option.
diskparts.py filesystem.py firmware.py fru.py fs_utils.py graph.py ibm_sep.py interfaces.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/interfaces.py:83: SyntaxWarning: "is not" with 'str' literal. Did you mean "!="?
iscsitargets.py log.py log_volume.py mkgraph.py model.py network.py nfsshares.py nw_cfginterfaces_utils.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_cfginterfaces_utils.py:458: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_cfginterfaces_utils.py:586: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_cfginterfaces_utils.py:587: SyntaxWarning: "\." is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\."? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_cfginterfaces_utils.py:1010: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_cfginterfaces_utils.py:1011: SyntaxWarning: "\." is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\."? A raw string is also an option.
nw_interfaces_utils.py   File "/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/nw_interfaces_utils.py", line 85
    os.chmod(MLX5_SRIOV_BOOT_FILE, 0744)
                                   ^
SyntaxError: leading zeros in decimal integer literals are not permitted; use an 0o prefix for octal integers

ovsbridges.py physical_vol.py powermanagement.py report.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/report.py:47: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
rules.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/rules.py:440: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/rules.py:445: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
sanadapters.py sel.py sensors.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/sensors.py:98: SyntaxWarning: "is not" with 'str' literal. Did you mean "!="?
servers.py servers_sensors.py services.py stgserver.py storage_devs.py swaps.py syscall.py sysmodules.py users.py   File "/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/users.py", line 488
    os.chmod(SUDOERS_FILE % user, 0440)
                                  ^
SyntaxError: leading zeros in decimal integer literals are not permitted; use an 0o prefix for octal integers

utils.py /usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:40: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:41: SyntaxWarning: "\w" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\w"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:42: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:43: SyntaxWarning: "\w" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\w"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:277: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:352: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:768: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:774: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:851: SyntaxWarning: "\w" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\w"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1153: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1218: SyntaxWarning: "\d" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\d"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1542: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1545: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1649: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/utils.py:1654: SyntaxWarning: "\s" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\s"? A raw string is also an option.
vol_group.py 
Byte-compiling python modules (optimized versions) ...
config.py 
Byte-compiling python modules (optimized versions) ...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py dasd_utils.py dasddevs.py dasdpartitions.py diskparts.py filesystem.py firmware.py fru.py fs_utils.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volume.py mkgraph.py model.py network.py nfsshares.py nw_cfginterfaces_utils.py nw_interfaces_utils.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgserver.py storage_devs.py swaps.py syscall.py sysmodules.py users.py utils.py Byte-compiling python modules (more optimized versions) ...
config.py 
vol_group.py 
Byte-compiling python modules (more optimized versions) ...
__init__.py audisp_plugins.py audit.py auditdisp.py backup.py capabilities.py cfginterfaces.py conf.py dasd_utils.py dasddevs.py dasdpartitions.py diskparts.py filesystem.py firmware.py fru.py fs_utils.py graph.py ibm_sep.py interfaces.py iscsitargets.py log.py log_volume.py mkgraph.py model.py network.py nfsshares.py nw_cfginterfaces_utils.py nw_interfaces_utils.py ovsbridges.py physical_vol.py powermanagement.py report.py rules.py sanadapters.py sel.py sensors.py servers.py servers_sensors.py services.py stgserver.py storage_devs.py swaps.py syscall.py sysmodules.py users.py utils.py vol_group.py 
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/model'
Making install in ui
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
Making install in config
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/config'
 /usr/bin/install -c -m 644 tab-ext.xml '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/config'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/config'
Making install in css
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
Making install in base
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
Making install in images
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[5]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/css/base/images'
 /usr/bin/install -c -m 644 progress48.gif ui-icons_888888_256x240.png '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/css/base/images'
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base/images'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css/base'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[4]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/css'
 /usr/bin/install -c -m 644 ginger.css '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/css'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/css'
Making install in js
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/js'
 /usr/bin/install -c -m 644 ginger-bootgrid.js host-admin-addauditrule.js host-admin-configauditrule.js host-admin-editrule.js host-admin-importauditrule.js host-admin.js host-audit.js host-network-bond.js host-network-enable-sriov.js host-network-ovs.js host-network-settings.js host-network-vlan.js host-network.js host-server-fru.js host-server-sdr.js host-server-sel.js host-server-temp.js host-server.js host-settings.js host-storage-addswap.js host-storage-filesystem.js host-storage-iscsi.js host-storage-partition.js host-storage-vg.js host-storage.js host-sysmodules.js host-system-services.js util.js '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/js'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/js'
Making install in pages
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
Making install in help
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
Making install in en_US
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
make[5]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/en_US'
 /usr/bin/install -c -m 644 host-admin.html host-network.html host-server.html host-storage.html host-system-services.html '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/en_US'
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/en_US'
Making install in pt_BR
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
make[5]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/pt_BR'
 /usr/bin/install -c -m 644 host-admin.html '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/pt_BR'
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/pt_BR'
Making install in zh_CN
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[5]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/zh_CN'
 /usr/bin/install -c -m 644 host-admin.html '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help/zh_CN'
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help/zh_CN'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[5]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[5]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help'
 /usr/bin/install -c -m 644 ginger-help.css '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/help'
make[5]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/help'
Making install in tabs
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[4]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/tabs'
 /usr/bin/install -c -m 644 host-server.html.tmpl host-settings.html.tmpl '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages/tabs'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages/tabs'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[4]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages'
 /usr/bin/install -c -m 644 host-add-server.html.tmpl host-admin-ConfigAuditRule.html.tmpl host-admin-EditAuditRule.html.tmpl host-admin-ImportAuditRule.html.tmpl host-admin-addAuditRule.html.tmpl host-admin-editControlRule.html.tmpl host-admin-editSystemRule.html.tmpl host-admin.html.tmpl host-audit.html.tmpl host-network-bond.html.tmpl host-network-enable-sriov.html.tmpl host-network-ovs-add.html.tmpl host-network-ovs-edit.html.tmpl host-network-settings.html.tmpl host-network-vlan.html.tmpl host-network.html.tmpl host-server-fru.html.tmpl host-server-sdr.html.tmpl host-server-sel.html.tmpl host-server-temp.html.tmpl host-storage-add-swap.html.tmpl host-storage-addpartitions.html.tmpl host-storage-formatpartitions.html.tmpl host-storage-fs-mount.html.tmpl host-storage-iSCSI-discoverIQN.html.tmpl host-storage-iSCSI-settings.html.tmpl host-storage-iSCSI-targetsettings.html.tmpl host-storage-partition-addtoVG.html.tmpl host-storage-vg-add.html.tmpl host-storage.html.tmpl host-sysmodules-load.html.tmpl host-sysmodules.html.tmpl host-system-services.html.tmpl host-upd-server.html.tmpl i18n.json.tmpl '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/pages'
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/pages'
Making install in images
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/images'
 /usr/bin/install -c -m 644 ginger.svg '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/share/wok/plugins/ginger/ui/images'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui/images'
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/ui'
Making install in contrib
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make  install-recursive
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
Making install in DEBIAN
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib/DEBIAN'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[4]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/contrib'
Making install in tests
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make  install-am
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[3]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0/tests'
make[1]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
while read L && test -n "$L"; do                  \
	dir=mo/$L/LC_MESSAGES ;                       \
	/bin/mkdir -p $dir ;                             \
	ln -sf ../../../po/$L.gmo $dir/ginger.mo ;   \
done < po/LINGUAS
make[2]: Entering directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/etc/wok/plugins.d'
/usr/bin/install -c -m 644 API.json /home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger/API.json
 /bin/mkdir -p '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger'
 /usr/bin/install -c -m 644 ginger.conf '/home/buildozer/aports/testing/ginger/pkg/ginger/etc/wok/plugins.d'
 /usr/bin/install -c -m 644 __init__.py ginger.py i18n.py '/home/buildozer/aports/testing/ginger/pkg/ginger/usr/lib/python3.14/site-packages/wok/plugins/ginger'
Byte-compiling python modules...
__init__.py ginger.py i18n.py 
Byte-compiling python modules (optimized versions) ...
__init__.py ginger.py i18n.py 
Byte-compiling python modules (more optimized versions) ...
__init__.py ginger.py i18n.py 
make[2]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
make[1]: Leaving directory '/home/buildozer/aports/testing/ginger/src/ginger-2.4.0'
>>> ginger-lang*: Running split function lang...
'usr/share/locale' -> '/home/buildozer/aports/testing/ginger/pkg/ginger-lang/usr/share/locale'
>>> ginger-lang*: Preparing subpackage ginger-lang...
>>> ginger-lang*: Running postcheck for ginger-lang
>>> ginger-pyc*: Running split function pyc...
'usr/lib/python3.14/site-packages/wok/plugins/ginger/__pycache__' -> '/home/buildozer/aports/testing/ginger/pkg/ginger-pyc/usr/lib/python3.14/site-packages/wok/plugins/ginger/__pycache__'
'usr/lib/python3.14/site-packages/wok/plugins/ginger/model/__pycache__' -> '/home/buildozer/aports/testing/ginger/pkg/ginger-pyc/usr/lib/python3.14/site-packages/wok/plugins/ginger/model/__pycache__'
'usr/lib/python3.14/site-packages/wok/plugins/ginger/control/__pycache__' -> '/home/buildozer/aports/testing/ginger/pkg/ginger-pyc/usr/lib/python3.14/site-packages/wok/plugins/ginger/control/__pycache__'
>>> ginger-pyc*: Preparing subpackage ginger-pyc...
>>> ginger-pyc*: Running postcheck for ginger-pyc
>>> ginger*: Running postcheck for ginger
>>> ginger*: Preparing package ginger...
>>> ginger*: Tracing dependencies...
	py3-configobj
	py3-pyparted
	wok
	python3~3.14
>>> ginger*: Package size: 1.4 MB
>>> ginger*: Compressing data...
>>> ginger*: Create checksum...
>>> ginger*: Create ginger-2.4.0-r8.apk
>>> ginger-lang*: Tracing dependencies...
>>> ginger-lang*: Package size: 382.4 KB
>>> ginger-lang*: Compressing data...
>>> ginger-lang*: Create checksum...
>>> ginger-lang*: Create ginger-lang-2.4.0-r8.apk
>>> ginger-pyc*: Tracing dependencies...
	python3~3.14
>>> ginger-pyc*: Package size: 1.6 MB
>>> ginger-pyc*: Compressing data...
>>> ginger-pyc*: Create checksum...
>>> ginger-pyc*: Create ginger-pyc-2.4.0-r8.apk
>>> ginger: Build complete at Sun, 18 Oct 2026 16:44:27 +0000 elapsed time 0h 0m 12s
>>> ginger: Cleaning up srcdir
>>> ginger: Cleaning up pkgdir
>>> ginger: Cleaning up tmpdir
>>> ginger: Uninstalling dependencies...
(  1/186) Purging .makedepends-ginger (20261018.164415)
(  2/186) Purging py3-configobj-pyc (5.0.9-r2)
(  3/186) Purging py3-configobj (5.0.9-r2)
(  4/186) Purging wok-pyc (3.0.0-r7)
(  5/186) Purging wok (3.0.0-r7)
(  6/186) Purging nginx-openrc (1.30.4-r3)
(  7/186) Purging nginx (1.30.4-r3)
(  8/186) Purging logrotate-openrc (3.22.0-r0)
(  9/186) Purging logrotate (3.22.0-r0)
( 10/186) Purging py3-cherrypy-pyc (18.10.0-r1)
( 11/186) Purging py3-cherrypy (18.10.0-r1)
( 12/186) Purging py3-cheroot-pyc (11.1.2-r1)
( 13/186) Purging py3-cheroot (11.1.2-r1)
( 14/186) Purging py3-portend-pyc (3.2.0-r2)
( 15/186) Purging py3-portend (3.2.0-r2)
( 16/186) Purging py3-tempora-pyc (5.13.0-r0)
( 17/186) Purging py3-tempora (5.13.0-r0)
( 18/186) Purging py3-dateutil-pyc (2.9.0-r4)
( 19/186) Purging py3-dateutil (2.9.0-r4)
( 20/186) Purging py3-jaraco.collections-pyc (5.2.1-r1)
( 21/186) Purging py3-jaraco.collections (5.2.1-r1)
( 22/186) Purging py3-jaraco.text-pyc (4.2.0-r0)
( 23/186) Purging py3-jaraco.text (4.2.0-r0)
( 24/186) Purging py3-autocommand-pyc (2.2.2-r5)
( 25/186) Purging py3-autocommand (2.2.2-r5)
( 26/186) Purging py3-inflect-pyc (7.5.0-r1)
( 27/186) Purging py3-inflect (7.5.0-r1)
( 28/186) Purging py3-typeguard-pyc (4.6.0-r0)
( 29/186) Purging py3-typeguard (4.6.0-r0)
( 30/186) Purging py3-bracex-pyc (3.0.1-r0)
( 31/186) Purging py3-bracex (3.0.1-r0)
( 32/186) Purging py3-hatchling-pyc (1.31.0-r0)
( 33/186) Purging py3-hatchling (1.31.0-r0)
( 34/186) Purging py3-editables-pyc (0.6-r0)
( 35/186) Purging py3-editables (0.6-r0)
( 36/186) Purging py3-packaging-pyc (26.2-r0)
( 37/186) Purging py3-packaging (26.2-r0)
( 38/186) Purging py3-parsing-pyc (3.3.3-r0)
( 39/186) Purging py3-parsing (3.3.3-r0)
( 40/186) Purging py3-pathspec-pyc (1.1.1-r0)
( 41/186) Purging py3-pathspec (1.1.1-r0)
( 42/186) Purging py3-pluggy-pyc (1.6.0-r1)
( 43/186) Purging py3-pluggy (1.6.0-r1)
( 44/186) Purging py3-trove-classifiers-pyc (2026.9.21.13-r0)
( 45/186) Purging py3-trove-classifiers (2026.9.21.13-r0)
( 46/186) Purging py3-jaraco.context-pyc (6.1.2-r0)
( 47/186) Purging py3-jaraco.context (6.1.2-r0)
( 48/186) Purging py3-typer-pyc (0.24.1-r1)
( 49/186) Purging py3-typer (0.24.1-r1)
( 50/186) Purging py3-annotated-doc-pyc (0.0.4-r1)
( 51/186) Purging py3-annotated-doc (0.0.4-r1)
( 52/186) Purging py3-click-pyc (8.4.2-r0)
( 53/186) Purging py3-click (8.4.2-r0)
( 54/186) Purging py3-rich-pyc (15.0.0-r1)
( 55/186) Purging py3-rich (15.0.0-r1)
( 56/186) Purging py3-markdown-it-py-pyc (3.0.0-r2)
( 57/186) Purging py3-markdown-it-py (3.0.0-r2)
( 58/186) Purging py3-mdurl-pyc (0.1.2-r4)
( 59/186) Purging py3-mdurl (0.1.2-r4)
( 60/186) Purging py3-pygments-pyc (2.21.0-r0)
( 61/186) Purging py3-pygments (2.21.0-r0)
( 62/186) Purging py3-shellingham-pyc (1.5.4-r2)
( 63/186) Purging py3-shellingham (1.5.4-r2)
( 64/186) Purging py3-jaraco.functools-pyc (4.6.0-r0)
( 65/186) Purging py3-jaraco.functools (4.6.0-r0)
( 66/186) Purging py3-jaraco.classes-pyc (3.4.0-r2)
( 67/186) Purging py3-jaraco.classes (3.4.0-r2)
( 68/186) Purging py3-more-itertools-pyc (10.8.0-r1)
( 69/186) Purging py3-more-itertools (10.8.0-r1)
( 70/186) Purging py3-tz-pyc (2026.4-r0)
( 71/186) Purging py3-tz (2026.4-r0)
( 72/186) Purging py3-zc.lockfile-pyc (4.0-r1)
( 73/186) Purging py3-zc.lockfile (4.0-r1)
( 74/186) Purging py3-jsonschema-pyc (4.26.0-r0)
( 75/186) Purging py3-jsonschema (4.26.0-r0)
( 76/186) Purging py3-jsonschema-specifications-pyc (2025.9.1-r2)
( 77/186) Purging py3-jsonschema-specifications (2025.9.1-r2)
( 78/186) Purging py3-referencing-pyc (0.37.0-r1)
( 79/186) Purging py3-referencing (0.37.0-r1)
( 80/186) Purging py3-attrs-pyc (26.1.0-r0)
( 81/186) Purging py3-attrs (26.1.0-r0)
( 82/186) Purging py3-typing-extensions-pyc (4.16.0-r0)
( 83/186) Purging py3-typing-extensions (4.16.0-r0)
( 84/186) Purging py3-rpds-py-pyc (0.30.0-r2)
( 85/186) Purging py3-rpds-py (0.30.0-r2)
( 86/186) Purging py3-pyparted-pyc (3.13.0-r2)
( 87/186) Purging py3-pyparted (3.13.0-r2)
( 88/186) Purging py3-ldap-pyc (3.4.8-r0)
( 89/186) Purging py3-ldap (3.4.8-r0)
( 90/186) Purging py3-asn1-modules-pyc (0.4.2-r1)
( 91/186) Purging py3-asn1-modules (0.4.2-r1)
( 92/186) Purging py3-asn1-pyc (0.6.4-r0)
( 93/186) Purging py3-asn1 (0.6.4-r0)
( 94/186) Purging py3-psutil-pyc (7.2.2-r0)
( 95/186) Purging py3-psutil (7.2.2-r0)
( 96/186) Purging py3-m2crypto-pyc (0.51.0-r0)
( 97/186) Purging py3-m2crypto (0.51.0-r0)
( 98/186) Purging py3-augeas-pyc (1.2.0-r1)
( 99/186) Purging py3-augeas (1.2.0-r1)
(100/186) Purging py3-cffi-pyc (2.0.0-r0)
(101/186) Purging py3-cffi (2.0.0-r0)
(102/186) Purging py3-cparser-pyc (3.0-r1)
(103/186) Purging py3-cparser (3.0-r1)
(104/186) Purging py3-pam-pyc (2.0.2-r3)
(105/186) Purging py3-pam (2.0.2-r3)
(106/186) Purging linux-pam (1.7.1-r4)
(107/186) Purging py3-six-pyc (1.17.0-r1)
(108/186) Purging py3-six (1.17.0-r1)
(109/186) Purging py3-lxml-pyc (6.1.1-r0)
(110/186) Purging py3-lxml (6.1.1-r0)
(111/186) Purging py3-libvirt-pyc (12.7.0-r0)
(112/186) Purging py3-libvirt (12.7.0-r0)
(113/186) Purging py3-yaml-pyc (6.0.3-r2)
(114/186) Purging py3-yaml (6.0.3-r2)
(115/186) Purging font-opensans (0_git20210927-r1)
(116/186) Purging mkfontscale (1.2.4-r0)
(117/186) Purging font-awesome-free (7.3.1-r0)
(118/186) Purging fontconfig (2.18.1-r0)
(119/186) Purging automake (1.18.1-r1)
(120/186) Purging autoconf (2.73-r0)
(121/186) Purging m4 (1.4.21-r0)
(122/186) Purging libtool (2.6.2-r1)
(123/186) Purging diffutils (3.12-r0)
(124/186) Purging libltdl (2.6.2-r1)
(125/186) Purging python3-dev (3.14.8-r0)
(126/186) Purging gettext-dev (1.0-r0)
(127/186) Purging xz (5.8.4-r0)
(128/186) Purging gettext-asprintf (1.0-r0)
(129/186) Purging gettext (1.0-r0)
(130/186) Purging gettext-envsubst (1.0-r0)
(131/186) Purging py3-pyflakes-pyc (4.0.1-r0)
(132/186) Purging py3-pyflakes (4.0.1-r0)
(133/186) Purging libxslt (1.1.43-r3)
(134/186) Purging augeas-libs (1.14.1-r0)
(135/186) Purging freetype (2.14.3-r0)
(136/186) Purging gettext-libs (1.0-r0)
(137/186) Purging git-perl (2.56.0-r0)
(138/186) Purging perl-git (2.56.0-r0)
(139/186) Purging perl-error (0.17030-r0)
(140/186) Purging perl (5.44.0-r0)
(141/186) Purging libfontenc (1.1.9-r0)
(142/186) Purging libldap (2.6.15-r0)
(143/186) Purging libpng (1.6.59-r0)
(144/186) Purging libvirt-libs (12.7.0-r0)
(145/186) Purging libxml2 (2.13.9-r2)
(146/186) Purging parted (3.7-r0)
(147/186) Purging py3-cheetah-pyc (3.3.3-r2)
(148/186) Purging py3-cheetah (3.3.3-r2)
(149/186) Purging python3-pyc (3.14.8-r0)
(150/186) Purging python3-pycache-pyc0 (3.14.8-r0)
(151/186) Purging pyc (3.14.8-r0)
(152/186) Purging python3 (3.14.8-r0)
(153/186) Purging readline (8.3.3-r1)
(154/186) Purging sqlite-libs (3.54.1-r0)
(155/186) Purging utmps-libs (0.1.3.4-r0)
(156/186) Purging xz-libs (5.8.4-r0)
(157/186) Purging yaml (0.2.5-r2)
(158/186) Purging device-mapper-libs (2.03.35-r8)
(159/186) Purging libsasl (2.1.28-r9)
(160/186) Purging gdbm (1.26-r0)
(161/186) Purging glib (2.90.0-r0)
(162/186) Purging gnutls (3.8.13-r0)
(163/186) Purging json-c (0.19-r1)
(164/186) Purging libtirpc (1.3.5-r1)
(165/186) Purging libtirpc-conf (1.3.5-r1)
(166/186) Purging krb5-libs (1.22.2-r1)
(167/186) Purging krb5-conf (1.0-r2)
(168/186) Purging keyutils-libs (1.6.3-r4)
(169/186) Purging libmount (2.42.4-r3)
(170/186) Purging libblkid (2.42.4-r3)
(171/186) Purging libbz2 (1.0.8-r6)
(172/186) Purging libcap-ng (0.9.6-r0)
(173/186) Purging libcom_err (1.47.4-r0)
(174/186) Purging libeconf (0.8.4-r0)
(175/186) Purging p11-kit (0.26.2-r1)
(176/186) Purging libffi (3.8.0-r0)
(177/186) Purging libintl (1.0-r0)
(178/186) Purging libnl3 (3.12.0-r0)
(179/186) Purging libpanelw (6.6_p20260822-r0)
(180/186) Purging libssh2 (1.11.1-r3)
(181/186) Purging libtasn1 (4.21.0-r0)
(182/186) Purging libuuid (2.42.4-r3)
(183/186) Purging libverto (0.3.2-r2)
(184/186) Purging mpdecimal (4.0.1-r0)
(185/186) Purging nettle (3.10.2-r0)
(186/186) Purging skalibs-libs (2.15.1.0-r0)
Executing busybox-1.38.0-r7.trigger
OK: 343.9 MiB in 105 packages
>>> ginger: Updating the testing/armhf repository index...
>>> ginger: Signing the index...