>>> redis: Building community/redis 7.2.7-r0 (using abuild 3.14.1-r5) started Fri, 10 Jan 2025 15:37:42 +0000 >>> redis: Validating /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.12.6-r0) (2/8) Installing openssl-dev (3.3.2-r4) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.16-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20250110.153743) Executing busybox-1.37.0-r10.trigger OK: 287 MiB in 110 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.7.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.7.tar.gz >>> redis: Checking sha512sums... redis-7.2.7.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/edge/redis-7.2.7.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise MAKE lua cd linenoise && make cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hiredis' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC slowlog.o CC eval.o CC bio.o CC endianconv.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC geohash_helper.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC acl.o CC tracking.o CC lolwut6.o CC socket.o CC sha256.o CC tls.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:295:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 295 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:446:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 446 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 447 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 32781 Testing unit/printver [ready]: 32783 Testing unit/dump [ready]: 32782 Testing unit/auth [ready]: 32784 Testing unit/protocol [ready]: 32786 Testing unit/keyspace [ready]: 32785 Testing unit/scan [ready]: 32787 Testing unit/info [ready]: 32789 Testing unit/info-command [ready]: 32788 Testing unit/type/string [ready]: 32790 Testing unit/type/incr [ready]: 32791 Testing unit/type/list [ready]: 32792 Testing unit/type/list-2 [ready]: 32794 Testing unit/type/list-3 [ready]: 32793 Testing unit/type/set [ready]: 32795 Testing unit/type/zset [ready]: 32796 Testing unit/type/hash Testing Redis version 7.2.7 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: DEL against a single item (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) [ok]: Vararg DEL (1 ms) [ok]: info command with at most one sub command (1 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: RESTORE can set an absolute expire (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: INCR against non existing key (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: SET and GET an item (1 ms) [ok]: DECR against key created by incr (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: DBSIZE (0 ms) [ok]: SET and GET an empty item (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: RESTORE can set LRU (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: DEL all keys (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: Is the small hash encoded with a listpack? (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (1 ms) [ok]: RESTORE can set LFU (1 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: INCR fails against a key holding a list (1 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: reg node check compression with insert and pop (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: INCR can modify objects in-place (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: reg node check compression with lset (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (1 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: plain node check compression (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: plain node check compression using lset (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: string to double with null terminator (1 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: HRANDFIELD - listpack (5 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (8 ms) [ok]: HRANDFIELD - hashtable (4 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZREVRANGE basics - listpack (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: SADD against non set (1 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (0 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: SADD a non-integer against a small intset (4 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (0 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (2 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: SADD a non-integer against a large intset (7 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (6 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (3 ms) [ok]: SADD an integer larger than 64 bits to a large intset (11 ms) [ok]: Handle an empty query (41 ms) [ok]: ZREMRANGEBYLEX basics - listpack (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: SCAN basic (50 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (0 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: Very big payload in GET/SET (52 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (39 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (7 ms) [ok]: Negative multibulk length (47 ms) [ok]: Out of range multibulk length (0 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (1 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (90 ms) [ok]: DUMP of non existing key returns nil (0 ms) [1/92 done]: unit/type/incr (0 seconds) Testing unit/type/stream [2/92 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: SCAN COUNT (54 ms) [ok]: HRANDFIELD with - hashtable (94 ms) [ok]: latencystats: disable/enable (1 ms) [ok]: latencystats: configure percentiles (2 ms) [3/92 done]: unit/printver (0 seconds) Testing unit/sort [ok]: latencystats: bad configure percentiles (1 ms) [ok]: Protocol desync regression test #1 (33 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: Regression for quicklist #3343 bug (130 ms) [ok]: SCAN MATCH (44 ms) [ok]: Protocol desync regression test #2 (32 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (0 ms) [ok]: Check compression with recompress (43 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (3 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: Protocol desync regression test #3 (32 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: RESP3 attributes (0 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: HRANDFIELD with - listpack (96 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: SCAN TYPE (67 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (0 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: test large number of args (28 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XPENDING only group (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (5 ms) [ok]: Test LINDEX and LINSERT on plain nodes (0 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: SCAN unknown type (46 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (22 ms) [ok]: Blocking XREADGROUP: key deleted (0 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: XREAD and XREADGROUP against wrong parameter (0 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: HSET/HLEN - Big hash creation (72 ms) [ok]: Is the big hash encoded with an hash table? (1 ms) [ok]: HGET against the small hash (0 ms) [ok]: XADD with MAXLEN option (72 ms) [ok]: Set encoding after DEBUG RELOAD (127 ms) [ok]: SREM basics - $type (1 ms) [ok]: stats: eventloop metrics (111 ms) [ok]: SREM basics - $type (7 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (36 ms) [ok]: SCAN with expired keys (52 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (3 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: MIGRATE is caching connections (223 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: Test LSET with packed / plain combinations (88 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: HGET against the big hash (51 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (1 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (3 ms) [ok]: SUNION with two sets - regular (6 ms) [ok]: SUNIONSTORE with two sets - regular (6 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (6 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SCAN with expired keys with TYPE filter (52 ms) [ok]: XADD with MAXLEN option and the '=' argument (75 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: SSCAN with encoding listpack (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (5 ms) [ok]: SSCAN with encoding hashtable (2 ms) [ok]: HSCAN with encoding listpack (1 ms) [ok]: HMSET - big hash (56 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (1 ms) [ok]: Crash due to wrongly recompress after lrem (223 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (1 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (6 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: SUNION with non existing keys - intset (6 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: Quicklist: SORT BY hash field (8 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (14 ms) [ok]: HSCAN with encoding hashtable (67 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (1 ms) [ok]: ZSCAN with encoding listpack (1 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: HMGET - big hash (52 ms) [ok]: HKEYS - small hash (0 ms) [ok]: XADD with MAXLEN option and the '~' argument (77 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (47 ms) [ok]: HKEYS - big hash (9 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (1 ms) [ok]: HGETALL - big hash (19 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (1 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (1 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: Test LSET with packed consist only one item (178 ms) [ok]: Crash due to delete entry from a compress quicklist node (0 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: ZSCAN with encoding skiplist (69 ms) [4/92 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: SCAN guarantees check under write load (13 ms) [ok]: SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: ZSCAN with PATTERN (1 ms) [ok]: XADD with MINID option (80 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: HSTRLEN against the big hash (48 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (2 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (19 ms) [ok]: Hash fuzzing #2 - 10 fields (14 ms) [ok]: EXPIRE - set timeouts multiple times (0 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: LPOS basic usage - quicklist (44 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (88 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (42 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (47 ms) [ok]: BLPOP: multiple existing lists - quicklist (90 ms) [ok]: ZSCAN scores: regression test for issue #2175 (443 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (43 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (1 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (90 ms) [ok]: COPY basic usage for list - quicklist (44 ms) [ok]: COPY basic usage for list - listpack (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (10 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (7 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: COPY basic usage for hashtable hash (9 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: COPY basic usage for stream (70 ms) [ok]: COPY basic usage for stream-cgroups (6 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (5 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: Regression for pattern matching very long nested loops (2 ms) [5/92 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: BLMOVE left right - quicklist (47 ms) [ok]: BLMOVE right left - quicklist (47 ms) [ok]: BLMOVE right right - quicklist (47 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1096 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (2 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: Coverage: HELP commands (2 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: SAVE - make sure there are all the types as values (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (2 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (3 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: MASTERAUTH test with binary password (908 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Hash fuzzing #1 - 512 fields (984 ms) [6/92 done]: unit/auth (2 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (0 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (1 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: FUZZ stresser with data model binary (405 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (2 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (0 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (0 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (0 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: stats: instantaneous metrics (1602 ms) [ok]: Very big payload random access (1874 ms) [ok]: stats: debug metrics (112 ms) [ok]: XCLAIM can claim PEL items from another consumer (604 ms) [7/92 done]: unit/info (2 seconds) Testing unit/quit [ok]: XADD mass insertion and XLEN (1642 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: Hash fuzzing #2 - 512 fields (620 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (0 ms) [ok]: FUZZ stresser with data model alpha (449 ms) [8/92 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: Big Quicklist: SORT BY key (425 ms) [ok]: Big Quicklist: SORT BY key with limit (11 ms) [ok]: BRPOPLPUSH timeout (1017 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: XRANGE can be used to iterate the whole stream (327 ms) [ok]: XCLAIM same consumer (201 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (161 ms) [ok]: FUZZ stresser with data model compr (400 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (0 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (1 ms) [ok]: ZDIFF fuzzing - listpack (2803 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Big Quicklist: SORT BY hash field (425 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (1 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (7 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (3 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (9 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (999 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: DBSIZE should be 10000 now (1 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: SETNX target key missing (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: ZDIFF algorithm 2 - skiplist (0 ms) [ok]: BGSAVE (52 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: WATCH will consider touched expired keys (1104 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (0 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: Hash table: SORT BY key (9 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: Hash table: SORT BY hash field (10 ms) [ok]: MULTI / EXEC is not propagated (single write command) (64 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (896 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: Hash ziplist of various encodings (92 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [9/92 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: XAUTOCLAIM can claim PEL items from another consumer (602 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: SDIFF fuzzing (2865 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (0 ms) [ok]: SDIFFSTORE should handle non existing key as empty (0 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (0 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (0 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (0 ms) [ok]: SRANDMEMBER - listpack (5 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: Connections start with the default user (1 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (1 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: SRANDMEMBER - intset (5 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (0 ms) [ok]: SPOP with - listpack (2 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (0 ms) [ok]: SPOP with - intset (2 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: SPOP new implementation: code path #2 intset (2 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: SPOP new implementation: code path #3 intset (1 ms) [ok]: ACLs can include single subcommands (0 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (0 ms) [ok]: ACLs cannot include a subcommand with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: SPOP new implementation: code path #3 listpack (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (0 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (101 ms) [ok]: ACL GETUSER provides reasonable results (10 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (3 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (0 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (2 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (0 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (58 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (1 ms) [ok]: SRANDMEMBER with - listpack (14 ms) [ok]: Check consistency of different data types after a reload (479 ms) [ok]: SRANDMEMBER with - intset (14 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (2 ms) [ok]: SRANDMEMBER with - hashtable (14 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: SRANDMEMBER histogram distribution - listpack (52 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (2 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: SRANDMEMBER histogram distribution - intset (53 ms) [ok]: Same dataset digest if saving/reloading as AOF? (129 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (53 ms) [ok]: Consumer seen-time and active-time (204 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC with REPLICAOF (100 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (104 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (0 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: XREADGROUP with NOACK creates consumer (3 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (104 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (0 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (0 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: Consumer group lag with XDELs (6 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (2 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [ok]: Consumer group lag with XTRIM (2 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (0 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1503 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MULTI and script timeout (402 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (103 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (102 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: EXEC and script timeout (403 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (2 ms) [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Test loading duplicate users in config on startup (9 ms) [ok]: XREAD with non empty second stream (805 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: MULTI-EXEC body and script timeout (402 ms) [ok]: Blocking XREAD will not reply with an empty array (110 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (104 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: Big Hash table: SORT BY key (437 ms) [ok]: Big Hash table: SORT BY key with limit (13 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (100 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (0 ms) [ok]: XDEL multiply id test (0 ms) [ok]: ACL from config file and config rewrite (202 ms) [ok]: PSETEX can set sub-second expires (102 ms) [10/92 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: BLPOP: timeout (1075 ms) [ok]: BLPOP: arguments are empty (2 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (0 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [11/92 done]: unit/type/stream-cgroups (5 seconds) Testing unit/latency-monitor [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (0 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: Validate read and write permissions format - empty selector (0 ms) [ok]: Validate read and write permissions format - empty pattern (1 ms) [ok]: Validate read and write permissions format - no pattern (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (0 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (0 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: just EXEC and script timeout (402 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (0 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: LTRIM stress testing - quicklist (5325 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: Big Hash table: SORT BY hash field (427 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (9 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: SETNX against expired volatile key (2535 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [12/92 done]: unit/acl-v2 (1 seconds) Testing integration/block-repl [ok]: SORT speed, 100 element list BY key, 100 times (21 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (24 ms) [ok]: GETDEL propagate as DEL command to replica (37 ms) [ok]: SORT speed, 100 element list directly, 100 times (15 ms) [ok]: SORT speed, 100 element list BY , 100 times (12 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: MULTI propagation of EVAL (100 ms) [13/92 done]: unit/sort (6 seconds) Testing integration/replication [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (7 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2105 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: ZDIFF fuzzing - skiplist (2964 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: Redis should actively expire keys incrementally (603 ms) [ok]: MULTI with BGREWRITEAOF (202 ms) [ok]: SETBIT fuzzing (352 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (0 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: ZMPOP propagate as pop with count command to replica (72 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (0 ms) [ok]: BRPOP: timeout (1081 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: MULTI with config set appendonly (204 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: BZMPOP readraw in RESP3 (199 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [ok]: XDEL fuzz test (1423 ms) [14/92 done]: unit/multi (5 seconds) Testing integration/replication-2 [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (198 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (896 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: GETRANGE fuzzing (811 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (0 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (0 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [15/92 done]: unit/type/string (7 seconds) Testing integration/replication-3 [ok]: APPEND fuzzing (172 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (0 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: FLUSHDB (52 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: ZUNIONSTORE result is sorted (118 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: SCAN regression test for issue #4906 (5963 ms) [ok]: Redis should lazy expire keys (1002 ms) [ok]: ZSCORE - listpack (21 ms) [ok]: ZMSCORE - listpack (22 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (24 ms) [ok]: ZSET sorting stresser - listpack (25 ms) [16/92 done]: unit/scan (7 seconds) Testing integration/replication-4 [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: BLMPOP_LEFT: timeout (1076 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (0 ms) [ok]: Don't rehash if redis has child process (413 ms) [ok]: Process title set as expected (0 ms) [17/92 done]: unit/other (7 seconds) Testing integration/replication-psync [ok]: EXPIRE should not resurrect keys (issue #1026) (1001 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (6 ms) [ok]: BLMPOP_RIGHT: timeout (1076 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: BLMPOP propagate as pop with count command to replica (199 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (43 ms) [ok]: LINSERT - quicklist (47 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1686 ms) [ok]: LINDEX consistency test - listpack (49 ms) [ok]: LINDEX random access - listpack (35 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (69 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (157 ms) [ok]: LINDEX consistency test - listpack (99 ms) [ok]: LINDEX random access - listpack (70 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (221 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (118 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (19 ms) [ok]: LINDEX consistency test - quicklist (38 ms) [ok]: LINDEX random access - quicklist (28 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (54 ms) [ok]: LINDEX consistency test - quicklist (76 ms) [ok]: LINDEX random access - quicklist (54 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8965 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (106 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (43 ms) [ok]: LMOVE left left base case - quicklist (46 ms) [ok]: LMOVE left right base case - quicklist (46 ms) [ok]: LMOVE right left base case - quicklist (47 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (537 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2816 ms) [ok]: min-slaves-to-write is ignored by slaves (0 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (43 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (90 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2010 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (90 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (93 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (73 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (90 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (87 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (4 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (43 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: MASTER and SLAVE consistency with expire (3300 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (24 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (46 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (47 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (0 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: LTRIM stress testing - listpack (5271 ms) [18/92 done]: unit/type/list-2 (11 seconds) Testing integration/replication-buffer [ok]: RPOPLPUSH with listpack source and existing target quicklist (47 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (299 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (47 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (47 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (47 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (46 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (0 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: SRANDMEMBER with a dict containing long chain (7260 ms) [ok]: SMOVE basics - from regular set to intset (2 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (45 ms) [ok]: SMOVE non existing key (1 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: SMOVE non existing src set (0 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (89 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (26 ms) [ok]: Mass RPOP/LPOP - listpack (52 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: LMPOP single existing list - quicklist (135 ms) [ok]: LMPOP multiple existing lists - quicklist (183 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: LMPOP propagate as pop with count command to replica (18 ms) [ok]: LRANGE basics - quicklist (47 ms) [ok]: LRANGE inverted indexes - quicklist (43 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (46 ms) [ok]: LRANGE out of range negative end index - quicklist (47 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (1 ms) [ok]: LRANGE out of range negative end index - listpack (0 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: intsets implementation stress testing (1145 ms) [ok]: LTRIM basics - quicklist (541 ms) [19/92 done]: unit/type/set (12 seconds) Testing integration/shutdown [ok]: LTRIM out of range negative end index - quicklist (94 ms) [ok]: LSET - quicklist (46 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (8 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (46 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (1 ms) [ok]: LREM starting from tail with negative count - quicklist (45 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (42 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (4 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [ok]: Test replication with parallel clients writing in different DBs (5243 ms) [ok]: List listpack -> quicklist encoding conversion (186 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (16 ms) [ok]: ZMSCORE - skiplist (14 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (15 ms) [ok]: ZSET sorting stresser - skiplist (19 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (0 ms) [ok]: List quicklist -> listpack encoding conversion (230 ms) [ok]: List encoding conversion when RDB loading (4 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (81 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: List invalid list-max-listpack-size config (88 ms) [ok]: Redis should not propagate the read command on lazy expire (95 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (4340 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: List of various encodings (93 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: All replicas share one global replication buffer (48 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (64 ms) [20/92 done]: unit/latency-monitor (8 seconds) Testing integration/aof [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [21/92 done]: unit/type/list (13 seconds) Testing integration/aof-race [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [22/92 done]: unit/expire (12 seconds) Testing integration/aof-multi-part [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Multi Part AOF can't load data when some file missing (107 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (107 ms) [ok]: Bad format: Server should have logged an error (0 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (108 ms) [ok]: Unfinished MULTI: Server should have logged an error (0 ms) [23/92 done]: integration/aof-race (1 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when there is a duplicate base file (107 ms) [ok]: Short read: Server should have logged an error (0 ms) [ok]: Short read: Utility should confirm the AOF is not valid (6 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: test old version rdb file (0 ms) [ok]: Short read: Utility should be able to fix the AOF (5 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (109 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (108 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1248 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1859 ms) [ok]: RDB encoding loading test (4 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (108 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (3 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (155 ms) [ok]: AOF+SPOP: Server should have been started (3 ms) [ok]: AOF+SPOP: Set should have 1 member (10 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (169 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (83 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (188 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (21 ms) [ok]: Server started empty with non-existing RDB file (7 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (127 ms) [ok]: AOF+EXPIRE: Server should have been started (6 ms) [ok]: AOF+EXPIRE: List should be empty (10 ms) [ok]: Multi Part AOF can start when no aof and no manifest (290 ms) [ok]: Server started empty with empty RDB file (7 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (13 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (5251 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (618 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (287 ms) [24/92 done]: integration/replication-2 (8 seconds) Testing integration/corrupt-dump [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6446 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (268 ms) [ok]: MIGRATE cached connections are released after some time (15007 ms) [ok]: corrupt payload: #7445 - with sanitize (256 ms) [ok]: Test RDB stream encoding (458 ms) [ok]: Test RDB stream encoding - sanitize dump (17 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (261 ms) [ok]: MIGRATE is able to migrate a key between two instances (196 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (200 ms) [ok]: Server should not start if RDB file can't be open (5 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (248 ms) [ok]: corrupt payload: invalid zlbytes header (190 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2761 ms) [ok]: MIGRATE is able to copy a key between two instances (287 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Server should not start if RDB is corrupted (119 ms) [ok]: Slave should be able to synchronize with the master (238 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1024 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: corrupt payload: valid zipped hash header, dup records (283 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (330 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (294 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2330 ms) [ok]: corrupt payload: quicklist big ziplist prev len (296 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1748 ms) [ok]: First server should have role slave after SLAVEOF (119 ms) [ok]: MIGRATE propagates TTL correctly (367 ms) [ok]: Slave is able to evict keys created in writable slaves (6009 ms) [ok]: Set instance A as slave of B (133 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (444 ms) [ok]: INCRBYFLOAT replication, should not remove expire (40 ms) [ok]: Writable replica doesn't return expired keys (117 ms) [ok]: GETSET replication (55 ms) [ok]: XRANGE fuzzing (10167 ms) [ok]: XREVRANGE regression test for issue #5006 (0 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (19 ms) [ok]: corrupt payload: quicklist small ziplist prev len (279 ms) [ok]: PFCOUNT updates cache on readonly replica (50 ms) [ok]: XTRIM with MAXLEN option basic test (77 ms) [ok]: XADD with LIMIT consecutive calls (8 ms) [ok]: XTRIM with ~ is limited (8 ms) [ok]: XTRIM without ~ is not limited (8 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (67 ms) [ok]: XTRIM without ~ and with LIMIT (8 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: corrupt payload: quicklist ziplist wrong count (177 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (14291 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (320 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (12 ms) [ok]: corrupt payload: #3080 - quicklist (167 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1008 ms) [ok]: Replication of an expired key does not delete the expired key (599 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (37 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (196 ms) [ok]: BZMPOP_MIN with variadic ZADD (16 ms) [ok]: corrupt payload: quicklist with empty ziplist (160 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (141 ms) [25/92 done]: integration/replication-3 (10 seconds) Testing integration/corrupt-dump-fuzzer [ok]: XADD with MINID > lastid can propagate correctly (11 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (286 ms) [ok]: First server should have role slave after SLAVEOF (20 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (13 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (190 ms) [ok]: BRPOPLPUSH replication, list exists (1026 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (23 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (237 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (116 ms) [ok]: corrupt payload: #3080 - ziplist (267 ms) [ok]: Detect write load to master (2017 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (203 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (796 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1016 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (187 ms) [ok]: Test FLUSHALL aborts bgsave (2037 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (4 ms) [ok]: bgsave resets the change counter (136 ms) [ok]: BZMPOP propagate as pop with count command to replica (142 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (2 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1866 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (186 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (371 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9117 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (280 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (388 ms) [ok]: XADD with ~ MINID can propagate correctly (439 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (414 ms) [ok]: Shutting down master waits for replica timeout (2393 ms) [ok]: BLMOVE (left, left) replication, list exists (1026 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (27 ms) [ok]: corrupt payload: listpack invalid size header (192 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (284 ms) [ok]: ZSET skiplist order consistency when elements are moved (708 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (6 ms) [ok]: ZRANDMEMBER - skiplist (6 ms) [ok]: corrupt payload: listpack too long entry len (280 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (1 ms) [ok]: ZRANDMEMBER with - skiplist (178 ms) [ok]: corrupt payload: listpack very long entry len (137 ms) [ok]: ZRANDMEMBER with - listpack (179 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (11 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (386 ms) [ok]: corrupt payload: listpack too long entry prev len (163 ms) [26/92 done]: unit/type/zset (20 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: client freed during loading (1277 ms) [ok]: RDB load zipmap hash: converts to listpack (0 ms) [ok]: AOF enable will create manifest file (541 ms) [ok]: corrupt payload: stream with duplicate consumers (270 ms) [ok]: BLMOVE (left, right) replication, list exists (1023 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (23 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (10 ms) [ok]: corrupt payload: hash ziplist with duplicate records (160 ms) [ok]: corrupt payload: hash listpack with duplicate records (180 ms) [ok]: Shutting down master waits for replica then fails (1342 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (556 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (13 ms) [27/92 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: XADD can CREATE an empty stream (10 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (257 ms) [ok]: XSETID can set a specific ID (6 ms) [ok]: XSETID cannot SETID with smaller ID (13 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (6 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (7 ms) [ok]: XSETID errors on negstive offset (7 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (12 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (6 ms) [ok]: XSETID cannot set the offset to less than the length (18 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (30 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (17 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (28 ms) [ok]: corrupt payload: hash ziplist uneven record count (273 ms) [28/92 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: XDEL/TRIM are reflected by recorded first entry (80 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (17 ms) [ok]: Maximum XDEL ID behaves correctly (56 ms) [ok]: XADD with artial ID with maximal seq (19 ms) [ok]: Shutting down master waits for replica then aborted (678 ms) [29/92 done]: integration/shutdown (9 seconds) Testing integration/logging [ok]: corrupt payload: hash duplicate records (180 ms) [ok]: AOF fsync always barrier issue (5644 ms) [ok]: BLMOVE (right, left) replication, list exists (1049 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (40 ms) [ok]: corrupt payload: hash empty zipmap (180 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (27 ms) [ok]: GETEX should not append to AOF (14 ms) [ok]: Crash report generated on SIGABRT (17 ms) [ok]: Empty stream can be rewrite into AOF correctly (81 ms) [30/92 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/psync2 [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1415 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (96 ms) [ok]: Crash report generated on DEBUG SEGFAULT (7 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (186 ms) [31/92 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: Unknown command: Server should have logged an error (5 ms) [ok]: XGROUP HELP should not have unexpected options (3 ms) [ok]: XINFO HELP should not have unexpected options (7 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (176 ms) [32/92 done]: unit/type/stream (21 seconds) Testing integration/psync2-pingoff [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (133 ms) [ok]: Test RDB load info (1874 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (469 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (225 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: AOF enable/disable auto gc (215 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (218 ms) [ok]: AOF can produce consecutive sequence number after reload (130 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: BLMOVE (right, right) replication, list exists (1025 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (218 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: BLPOP followed by role change, issue #2473 (213 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (306 ms) [ok]: corrupt payload: fuzzer findings - hash crash (215 ms) [ok]: Generate timestamp annotations in AOF (319 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3318 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (220 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: PSYNC2 #3899 regression: setup (1006 ms) [ok]: Sync should have transferred keys from master (7 ms) [ok]: The link status should be up (3 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (219 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: AOF will trigger limit when AOFRW fails many times (610 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (219 ms) [ok]: Truncate AOF to specific timestamp (397 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty intset (218 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (218 ms) [ok]: SET on the master should immediately propagate (808 ms) [ok]: FLUSHDB / FLUSHALL should replicate (80 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1120 ms) [33/92 done]: integration/replication-buffer (13 seconds) Testing integration/psync2-master-restart [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (220 ms) [ok]: Test child sending info (1905 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (216 ms) [ok]: MIGRATE can correctly transfer large values (7274 ms) [ok]: script won't load anymore if it's in rdb (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (214 ms) [ok]: MIGRATE can correctly transfer hashes (214 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (215 ms) [ok]: failed bgsave prevents writes (201 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (223 ms) [34/92 done]: integration/rdb (10 seconds) Testing integration/failover [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (122 ms) [ok]: MIGRATE timeout actually works (631 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (111 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (214 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: MIGRATE can migrate multiple keys at once (214 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (125 ms) [ok]: setup replication for following tests (102 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (215 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (215 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2206 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (214 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (215 ms) [ok]: EVAL can process writes from AOF in read-only replicas (221 ms) [ok]: Test redis-check-aof for old style resp AOF (5 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (5 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (6 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (5 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (10 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (5 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2440 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (121 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (3 ms) [35/92 done]: integration/aof-multi-part (13 seconds) Testing integration/redis-cli [ok]: MIGRATE with multiple keys: delete just ack keys (216 ms) [36/92 done]: integration/aof (13 seconds) Testing integration/redis-benchmark [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (215 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: failover command to specific replica works (822 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (216 ms) [37/92 done]: unit/dump (26 seconds) Testing integration/dismiss-mem [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: Interactive CLI: Status reply (69 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (4 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (214 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: benchmark: full test suite (64 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7996 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (215 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (121 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1116 ms) [ok]: Interactive CLI: Parsing quotes (425 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (216 ms) [ok]: benchmark: multi-thread set,get (507 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9248 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: benchmark: pipelined full set,get (155 ms) [ok]: benchmark: arbitrary command (6 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (215 ms) [ok]: benchmark: keyspace length (54 ms) [ok]: failover command to any replica works (920 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [38/92 done]: integration/redis-benchmark (1 seconds) Testing unit/pubsub [ok]: corrupt payload: fuzzer findings - huge string (213 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (0 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: Interactive CLI: Subscribed mode (596 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8331 ms) [ok]: dismiss all data types memory (1146 ms) [ok]: PubSub messages with CLIENT REPLY OFF (86 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: failover to a replica with force works (421 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (215 ms) [ok]: Keyspace notifications: we receive keyspace notifications (50 ms) [ok]: Keyspace notifications: we receive keyevent notifications (43 ms) [ok]: Keyspace notifications: we can receive both kind of events (0 ms) [ok]: Keyspace notifications: we are able to mask events (0 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (120 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: dismiss client output buffer (276 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (413 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (2 ms) [ok]: Non-interactive TTY CLI: Bulk reply (1 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (215 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (13 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: Keyspace notifications: expired events (background expire) (195 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (0 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (8 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (2 ms) [ok]: dismiss client query buffer (203 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (8 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (122 ms) [39/92 done]: unit/pubsub (1 seconds) Testing unit/pubsubshard [ok]: failover with timeout aborts if replica never catches up (545 ms) [ok]: failovers can be aborted (14 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (2 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (215 ms) [ok]: PubSubShard with CLIENT REPLY OFF (89 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1629 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (216 ms) [ok]: failover aborts if target rejects sync request (524 ms) [ok]: corrupt payload: fuzzer findings - empty zset (215 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (217 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (220 ms) [ok]: Replication: commands with many arguments (issue #1221) (11145 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: spopwithcount rewrite srem command (72 ms) [ok]: dismiss replication backlog (1231 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (216 ms) [40/92 done]: integration/dismiss-mem (3 seconds) Testing unit/slowlog [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [41/92 done]: unit/pubsubshard (1 seconds) Testing unit/scripting [ok]: corrupt payload: fuzzer findings - LCS OOM (213 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (2 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - max entries is correctly handled (6 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (121 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (119 ms) [42/92 done]: integration/failover (5 seconds) Testing unit/functions [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (3 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (0 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (1 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (1 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (2 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (722 ms) [ok]: Dumping an RDB - functions only: no (1960 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (216 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (354 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (3 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (215 ms) [ok]: SLOWLOG - can clean older entries (200 ms) [ok]: FUNCTION - test function kill (403 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1927 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (217 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (2 ms) [ok]: Data divergence is allowed on writable replicas (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [43/92 done]: integration/psync2-master-restart (6 seconds) Testing unit/maxmemory [ok]: EVAL does not leak in the Lua stack (626 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [44/92 done]: integration/replication-4 (23 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (215 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: Script return recursive object (101 ms) [ok]: FUNCTION - test script kill not working on function (403 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (10 ms) [ok]: CLIENT INFO (1 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: Script check unpack with massive arguments (41 ms) [45/92 done]: unit/slowlog (1 seconds) Testing unit/introspection-2 [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (79 ms) [ok]: Test print are not available (1 ms) [ok]: CLIENT KILL close the client connection during bgsave (84 ms) [ok]: Dumping an RDB - functions only: yes (879 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (218 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (45 ms) [ok]: Scan mode (55 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (46 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (48 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (2 ms) [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: MONITOR log blocked command only once (2 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (1 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (274 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (223 ms) [46/92 done]: integration/corrupt-dump (16 seconds) Testing unit/limits [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (5 ms) [ok]: FUNCTION - test function wrong argument (1 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 55532) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (6 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (85 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (396 ms) [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (56 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: Timedout script link is still usable after Lua returns (140 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (277 ms) [ok]: CONFIG save params special case handled properly (861 ms) [ok]: CONFIG sanity (16 ms) [ok]: Timedout scripts and unblocked command (368 ms) [ok]: CONFIG REWRITE sanity (193 ms) [ok]: Check if maxclients works refusing connections (906 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (386 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [47/92 done]: unit/limits (1 seconds) Testing unit/obuf-limits [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: Test replication with blocking lists and sorted sets operations (25004 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [48/92 done]: integration/block-repl (26 seconds) Testing unit/bitops [ok]: Connect a replica to the master instance (101 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (258 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (319 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (749 ms) [ok]: CONFIG SET with multiple args (0 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (3 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (2 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (1 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (1 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (1 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: BITCOUNT fuzzing without start/end (294 ms) [ok]: redis-server command line arguments - error cases (59 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (366 ms) [ok]: Connecting as a replica (2162 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (214 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (1 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (215 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (362 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (1 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: FUNCTION - test function restore with function name collision (3 ms) [ok]: BITCOUNT fuzzing with start/end (484 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (0 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (2 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (216 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3521 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: BITOP and fuzzing (229 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [49/92 done]: unit/functions (4 seconds) Testing unit/bitfield [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (389 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (215 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (3 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (0 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: BITOP or fuzzing (262 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3001 ms) [ok]: Piping raw protocol (906 ms) [ok]: Options -X with illegal argument (4 ms) [ok]: DUMP RESTORE with -x option (8 ms) [ok]: DUMP RESTORE with -X option (8 ms) [ok]: BITFIELD overflow detection fuzzing (258 ms) [50/92 done]: integration/redis-cli (8 seconds) Testing unit/geo [ok]: BITOP xor fuzzing (254 ms) [ok]: BITOP NOT fuzzing (35 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (461 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (1 ms) [ok]: GEORADIUS with multiple WITH* tokens (0 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (1 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (0 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: GEODIST missing elements (0 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (0 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (156 ms) [ok]: BITFIELD overflow wrap fuzzing (305 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (163 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (409 ms) [ok]: TIME command using cached time (11 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (178 ms) [ok]: Script block the time in some expiration related commands (81 ms) [51/92 done]: unit/bitops (2 seconds) Testing unit/memefficiency [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: redis-server command line arguments - save with empty input (1078 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (1 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [52/92 done]: unit/bitfield (1 seconds) Testing unit/hyperloglog [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (438 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (217 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (213 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: Memory efficiency with values in range 32 (348 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (16 ms) [ok]: SCRIPTING FLUSH ASYNC (7 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: cannot modify protected configuration - local (4 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (435 ms) [ok]: Memory efficiency with values in range 64 (355 ms) [ok]: EVAL does not leak in the Lua stack (347 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (25 ms) [ok]: HyperLogLog self test passes (578 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (1 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: Memory efficiency with values in range 128 (360 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (515 ms) [ok]: HyperLogLogs are promote from sparse to dense (408 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (36 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (322 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Client output buffer hard limit is enforced (3788 ms) [ok]: Script return recursive object (102 ms) [ok]: Script check unpack with massive arguments (42 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Memory efficiency with values in range 1024 (409 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9407 ms) [ok]: config during loading (947 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (546 ms) [ok]: ziplist implementation: value encoding and backlink (9260 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: CONFIG REWRITE handles rename-command properly (338 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (115 ms) [ok]: TOUCH alters the last access time of a key (3001 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: HyperLogLog sparse encoding stress test (893 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (449 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9938 ms) [53/92 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/lazyfree [ok]: Timedout script link is still usable after Lua returns (137 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2918 ms) [ok]: UNLINK can reclaim memory in background (248 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (403 ms) [ok]: Timedout scripts and unblocked command (364 ms) [ok]: Memory efficiency with values in range 16384 (1200 ms) [ok]: CONFIG REWRITE handles alias config properly (665 ms) [54/92 done]: unit/introspection (7 seconds) Testing unit/wait [55/92 done]: unit/memefficiency (3 seconds) Testing unit/pause [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (287 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: lazy free a stream with all types of metadata (58 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [56/92 done]: unit/lazyfree (0 seconds) Testing unit/querybuf [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (0 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (444 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (345 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: command stats for MULTI (1 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (0 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (2 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (0 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (102 ms) [ok]: Test write commands are paused by RO (0 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [57/92 done]: unit/introspection-2 (8 seconds) Testing unit/tls [ok]: Test both active and passive expires are skipped during client pause (102 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (398 ms) [58/92 done]: integration/psync2-pingoff (17 seconds) Testing unit/tracking [59/92 done]: unit/tls (0 seconds) Testing unit/oom-score-adj [ok]: Clients are able to enable tracking and redirect it (1 ms) [ok]: The other connection is able to get invalidations (0 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (1 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (0 ms) [ok]: CONFIG SET oom-score-adj works as expected (10 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/92 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [61/92 done]: unit/pause (1 seconds) Testing unit/networking [ok]: maxmemory - policy volatile-random should only remove volatile keys. (380 ms) [ok]: CONFIG SET port number (215 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (111 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1082 ms) [ok]: CONFIG SET bind address (216 ms) [ok]: Temp rdb will be deleted in signal handle (84 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (420 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (0 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (97 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (1 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (98 ms) [ok]: CONFIG SET bind-source-addr (521 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (1 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (0 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [62/92 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Tracking invalidation message of eviction keys should be before response (3 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: client evicted due to large argv (45 ms) [ok]: Tracking gets notification on tracking table key eviction (71 ms) [ok]: Invalidation message received for flushall (2 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Test ASYNC flushall (2 ms) [ok]: client evicted due to large query buf (101 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: client evicted due to percentage of maxmemory (8 ms) [ok]: client evicted due to large multi buf (90 ms) [ok]: query buffer resized correctly (2116 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (3867 ms) [ok]: query buffer resized correctly when not idle (18 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (230 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1103 ms) [ok]: Tracking info is correct (3 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: RESP2 based basic invalidation with client reply off (44 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (2 ms) [ok]: client evicted due to watched key list (303 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 105497) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [63/92 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: SORT adds integer field to list (0 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [64/92 done]: unit/violations (0 seconds) Testing unit/replybufsize [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Default bind address configuration handling (1195 ms) [ok]: Protected mode works as expected (4 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1042 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (8 ms) [ok]: client evicted due to pubsub subscriptions (1005 ms) [ok]: client evicted due to tracking redirection (94 ms) [ok]: no-writes shebang flag on replica (301 ms) [65/92 done]: unit/networking (3 seconds) Testing unit/cluster/announced-endpoints [ok]: verify reply buffer limits (649 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [66/92 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: not enough good replicas (1 ms) [ok]: WAITAOF local copy before fsync (93 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (16879 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: not enough good replicas state change during long script (624 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (4 ms) [ok]: Consistent eval error reporting (7 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: WAITAOF local copy everysec (702 ms) [ok]: WAITAOF local copy with appendfsync always (0 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (1 ms) [67/92 done]: unit/scripting (13 seconds) Testing unit/cluster/cli [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: WAITAOF replica copy before fsync (82 ms) [ok]: query buffer resized correctly with fat argv (2889 ms) [68/92 done]: unit/querybuf (6 seconds) Testing unit/cluster/scripting [ok]: PSYNC2 #3899 regression: verify consistency (19 ms) [ok]: ziplist implementation: encoding stress testing (6433 ms) [69/92 done]: unit/type/list-3 (43 seconds) Testing unit/cluster/hostnames [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: WAITAOF replica copy everysec (712 ms) [ok]: Key lazy expires during key migration (13 ms) [ok]: Coverage: Basic cluster commands (3 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (202 ms) [70/92 done]: integration/psync2-reg (23 seconds) Testing unit/cluster/human-announced-nodename [ok]: Test change cluster-announce-bus-port at runtime (203 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [71/92 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/multi-slot-operations [ok]: WAITAOF replica copy everysec with AOFRW (1004 ms) [ok]: Create 3 node cluster (1920 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Perform a Resharding (5 ms) [ok]: Verify command got unblocked after resharding (48 ms) [ok]: Wait for cluster to be stable (9 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [72/92 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/slot-ownership [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5003 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (0 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [ok]: No response for single command if client output buffer hard limit is enforced (117 ms) [73/92 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/links [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1044 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (16 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (16 ms) [ok]: Obuf limit, KEYS stopped mid-run (41 ms) [ok]: Set cluster hostnames and verify they are propagated (209 ms) [74/92 done]: unit/obuf-limits (14 seconds) Testing unit/cluster/cluster-response-tls [75/92 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Kill a cluster node and wait for fail state (1728 ms) [ok]: Verify command got unblocked after cluster failure (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9431 ms) [ok]: Update hostnames and make sure they are all eventually propagated (209 ms) [ok]: Set cluster human announced nodename and let it propagate (104 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (113 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2011 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (102 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (206 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Continuous slots distribution (9 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (4 ms) [76/92 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/sharded-pubsub [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (206 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (102 ms) [ok]: AOF rewrite during write load: RDB preamble=no (30077 ms) [ok]: WAITAOF replica copy if replica is blocked (900 ms) [ok]: Turning off AOF kills the background writing child if any (103 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (56 ms) [ok]: AOF rewrite of list with listpack encoding, string data (104 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (193 ms) [ok]: AOF rewrite of list with listpack encoding, int data (103 ms) [77/92 done]: unit/cluster/slot-ownership (4 seconds) [ok]: AOF rewrite of list with quicklist encoding, int data (128 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: AOF rewrite of set with intset encoding, string data (103 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (187 ms) [ok]: AOF rewrite of set with intset encoding, int data (104 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (196 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (104 ms) [ok]: WAITAOF on promoted replica (601 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (190 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 160764) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (104 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: Detect write load to master (1001 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (131 ms) [ok]: Sharded pubsub publish behavior within multi/exec (2 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (1 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (1 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (1 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (104 ms) [ok]: client evicted due to client tracking prefixes (8375 ms) [ok]: client evicted due to output buf (14 ms) [ok]: client no-evict on (79 ms) [ok]: client no-evict off (31 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (201 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (103 ms) [ok]: Human nodenames are visible in log messages (3517 ms) [ok]: avoid client eviction when client is freed by output buffer limit (68 ms) [ok]: Each node has two links with each peer (4 ms) [ok]: Validate cluster links format (1 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (187 ms) [ok]: AOF rewrite functions (102 ms) [78/92 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: Functions are added to new node on redis-cli cluster add-node (2999 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (211 ms) [ok]: BGREWRITEAOF is refused if already in progress (9 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3732 ms) [79/92 done]: unit/aofrw (48 seconds) [80/92 done]: unit/cluster/sharded-pubsub (3 seconds) [ok]: decrease maxmemory-clients causes client eviction (454 ms) [ok]: Test restart will keep hostname information (154 ms) [ok]: Test hostname validation (0 ms) [ok]: evict clients only until below limit (103 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2002 ms) [ok]: GEOSEARCH fuzzy test - byradius (16975 ms) [ok]: evict clients in right order (large to small) (125 ms) [81/92 done]: unit/cluster/hostnames (8 seconds) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: client total memory grows during client no-evict (126 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (412 ms) [ok]: Verify that single primary marks replica as failed (3239 ms) [ok]: client total memory grows during maxmemory-clients disabled (125 ms) [82/92 done]: unit/client-eviction (12 seconds) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: WAITAOF replica isn't configured to do AOF (102 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (902 ms) [ok]: Migrate the last slot away from a node using redis-cli (3829 ms) [ok]: WAITAOF master sends PING after last write (1201 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6335 ms) [ok]: WAITAOF master client didn't send any write command (1202 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: redis-cli --cluster create with cluster-port (1920 ms) [ok]: WAITAOF master client didn't send any command (1201 ms) [ok]: redis-cli --cluster add-node with cluster-port (1127 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 220017) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [83/92 done]: unit/cluster/cli (16 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (16479 ms) [ok]: Disconnect link when send buffer limit reached (8841 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: Link memory increases with publishes (689 ms) [ok]: Link memory resets after publish messages flush (516 ms) [ok]: Verify that multiple primaries mark replica as failed (6252 ms) [84/92 done]: unit/cluster/links (15 seconds) [ok]: PSYNC2: Set #2 to replicate from #3 (1 ms) [85/92 done]: unit/cluster/failure-marking (14 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3328 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2327 ms) [ok]: GEOSEARCH fuzzy test - bybox (12186 ms) [ok]: GEOSEARCH box edges fuzzy test (31 ms) [86/92 done]: unit/geo (29 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7870 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1325 ms) [ok]: Slave should be able to synchronize with the master (106 ms) [ok]: setup replication for following tests (101 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (681 ms) [ok]: Detect write load to master (1001 ms) [87/92 done]: unit/wait (28 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 281573) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (1 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (197 ms) Waiting for process 37982 to exit... [88/92 done]: integration/psync2 (47 seconds) [ok]: slave buffer are counted correctly (31865 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9466 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (17132 ms) [ok]: replica buffer don't induce eviction (5834 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (161 ms) [ok]: client tracking don't cause eviction feedback loop (1308 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (42502 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: propagation with eviction (95 ms) [ok]: propagation with eviction in MULTI (95 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/92 done]: unit/maxmemory (50 seconds) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3324 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1526 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (619 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [90/92 done]: unit/hyperloglog (51 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9432 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (42 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6320 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (16355 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7955 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9416 ms) [ok]: Slave should be able to synchronize with the master (1807 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (32158 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9750 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (42 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (429 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (1 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (1 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (1 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (343 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (871 ms) [ok]: Busy script during async loading (875 ms) [ok]: Blocked commands and configs during async-loading (433 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 49354 to exit... Waiting for process 49354 to exit... Waiting for process 49354 to exit... [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6389 ms) Waiting for process 49354 to exit... [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) Waiting for process 49354 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7906 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9481 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9563 ms) [91/92 done]: integration/replication-psync (159 seconds) [ok]: diskless loading short read (33850 ms) [ok]: diskless no replicas drop during rdb pipe (6505 ms) [ok]: diskless slow replicas drop during rdb pipe (3556 ms) [ok]: diskless fast replicas drop during rdb pipe (5682 ms) [ok]: diskless all replicas drop during rdb pipe (1583 ms) [ok]: diskless timeout replicas drop during rdb pipe (6153 ms) [ok]: diskless replication child being killed is collected (1453 ms) [ok]: replication child dies when parent is killed - diskless: yes (1141 ms) [ok]: replication child dies when parent is killed - diskless: no (1343 ms) [ok]: diskless replication read pipe cleanup (854 ms) [ok]: replicaof right after disconnection (1725 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (921 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms) [ok]: Discard cache master before loading transferred RDB when full sync (103 ms) [ok]: replica can handle EINTR if use diskless load (638 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (94 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (144 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (104 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (103 ms) [ok]: PSYNC with wrong offset should throw error (0 ms) [ok]: Test replication with lazy expire (111 ms) [92/92 done]: integration/replication (201 seconds) Testing solo test [92/92 done]: list-large-memory (0 seconds) Testing solo test [92/92 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [92/92 done]: bitops-large-memory (0 seconds) Testing solo test [92/92 done]: defrag (3 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [92/92 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/type/incr 0 seconds - unit/info-command 0 seconds - unit/printver 1 seconds - unit/protocol 1 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 0 seconds - unit/quit 3 seconds - unit/type/hash 2 seconds - unit/acl 5 seconds - unit/type/stream-cgroups 1 seconds - unit/acl-v2 6 seconds - unit/sort 5 seconds - unit/multi 7 seconds - unit/type/string 7 seconds - unit/scan 7 seconds - unit/other 11 seconds - unit/type/list-2 12 seconds - unit/type/set 8 seconds - unit/latency-monitor 13 seconds - unit/type/list 12 seconds - unit/expire 1 seconds - integration/aof-race 8 seconds - integration/replication-2 10 seconds - integration/replication-3 20 seconds - unit/type/zset 0 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-hash-on-load 9 seconds - integration/shutdown 0 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 21 seconds - unit/type/stream 13 seconds - integration/replication-buffer 10 seconds - integration/rdb 13 seconds - integration/aof-multi-part 13 seconds - integration/aof 26 seconds - unit/dump 1 seconds - integration/redis-benchmark 1 seconds - unit/pubsub 3 seconds - integration/dismiss-mem 1 seconds - unit/pubsubshard 5 seconds - integration/failover 6 seconds - integration/psync2-master-restart 23 seconds - integration/replication-4 1 seconds - unit/slowlog 16 seconds - integration/corrupt-dump 1 seconds - unit/limits 26 seconds - integration/block-repl 4 seconds - unit/functions 8 seconds - integration/redis-cli 2 seconds - unit/bitops 1 seconds - unit/bitfield 20 seconds - integration/corrupt-dump-fuzzer 7 seconds - unit/introspection 3 seconds - unit/memefficiency 0 seconds - unit/lazyfree 8 seconds - unit/introspection-2 17 seconds - integration/psync2-pingoff 0 seconds - unit/tls 0 seconds - unit/oom-score-adj 1 seconds - unit/pause 1 seconds - unit/shutdown 2 seconds - unit/tracking 0 seconds - unit/violations 3 seconds - unit/networking 1 seconds - unit/replybufsize 13 seconds - unit/scripting 6 seconds - unit/querybuf 43 seconds - unit/type/list-3 23 seconds - integration/psync2-reg 3 seconds - unit/cluster/announced-endpoints 3 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 14 seconds - unit/obuf-limits 0 seconds - unit/cluster/cluster-response-tls 3 seconds - unit/cluster/multi-slot-operations 4 seconds - unit/cluster/slot-ownership 6 seconds - unit/cluster/human-announced-nodename 48 seconds - unit/aofrw 3 seconds - unit/cluster/sharded-pubsub 8 seconds - unit/cluster/hostnames 12 seconds - unit/client-eviction 16 seconds - unit/cluster/cli 15 seconds - unit/cluster/links 14 seconds - unit/cluster/failure-marking 29 seconds - unit/geo 28 seconds - unit/wait 47 seconds - integration/psync2 50 seconds - unit/maxmemory 51 seconds - unit/hyperloglog 159 seconds - integration/replication-psync 201 seconds - integration/replication 0 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 3 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.7/src' >>> redis-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/init.d' >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.7-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 1.7 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.7-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> redis*: Package size: 2.6 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.7-r0.apk >>> redis: Build complete at Fri, 10 Jan 2025 15:41:29 +0000 elapsed time 0h 3m 47s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250110.153743) (2/8) Purging linux-headers (6.12.6-r0) (3/8) Purging openssl-dev (3.3.2-r4) (4/8) Purging tcl (8.6.16-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r10.trigger OK: 274 MiB in 102 packages >>> redis: Updating the community/armv7 repository index... >>> redis: Signing the index...