>>> redis: Building community/redis 8.0.0-r0 (using abuild 3.15.0_rc3-r3) started Wed, 14 May 2025 10:34:19 +0000 >>> redis: Validating /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.14.2-r0) (2/8) Installing openssl-dev (3.5.0-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.16-r0) (5/8) Installing libintl (0.24.1-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20250514.103420) Executing busybox-1.37.0-r17.trigger OK: 287 MiB in 112 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-8.0.0.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-8.0.0.tar.gz >>> redis: Checking sha512sums... redis-8.0.0.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/edge/redis-8.0.0.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 494 (offset 72 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). for dir in src; do make -C $dir all; done make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d ebuckets.d eventnotifier.d iothread.d mstr.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crccombine.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d hnsw.d cJSON.d vset.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so internalsecret.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo internalsecret.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS= >> .make-settings echo REDIS_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -I../deps/fast_float -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 -DINCLUDE_VEC_SETS=1 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv fast_float) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise MAKE lua cd linenoise && make cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/hiredis' MAKE fpconv cd fpconv && make MAKE fast_float cd fast_float && make libfast_float make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/linenoise' cc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/hdr_histogram' cc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/lua/src' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/fpconv' cc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/fast_float' c++ -Wall -O3 -std=c++11 -DFASTFLOAT_ALLOWS_LEADING_PLUS -c fast_float_strtod.cpp cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a cc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm cc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/hiredis' ar -r libfast_float.a fast_float_strtod.o ar: creating libfast_float.a make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/fast_float' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC ebuckets.o CC eventnotifier.o CC iothread.o CC mstr.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC replication.o CC rdb.o CC t_string.o CC db.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crccombine.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:195:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 195 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 196 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:200:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 200 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 201 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:208:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 208 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 209 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:297:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 297 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:448:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 448 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 449 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC hnsw.o CC cJSON.o CC vset.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o ../modules/vector-sets/hnsw.c: In function 'hnsw_insert_serialized': ../modules/vector-sets/hnsw.c:2187:40: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2187 | node->layers[i].links[j] = (hnswNode*)params[param_idx++]; | ^ ../modules/vector-sets/hnsw.c: In function 'hnsw_deserialize_index': ../modules/vector-sets/hnsw.c:2261:38: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 2261 | uint64_t linked_id = (uint64_t) node->layers[i].links[j]; | ^ ../modules/vector-sets/vset.c: In function 'VADD_thread': ../modules/vector-sets/vset.c:461:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 461 | int ef = (uint64_t)targ[6]; | ^ ../modules/vector-sets/vset.c: In function 'VADD_CASReply': ../modules/vector-sets/vset.c:492:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 492 | int ef = (uint64_t)targ[6]; | ^ ../modules/vector-sets/vset.c: In function 'VSIM_RedisCommand': ../modules/vector-sets/vset.c:1104:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1104 | targ[3] = (void*)count; | ^ LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' for dir in src; do make -C $dir test; done make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' CC Makefile.dep CC release.o LINK redis-server LINK redis-cli LINK redis-benchmark INSTALL redis-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 66269 Testing unit/acl-v2 [ready]: 66270 Testing unit/acl [ready]: 66272 Testing unit/aofrw [ready]: 66271 Testing unit/auth [ready]: 66274 Testing unit/bitfield [ready]: 66273 Testing unit/bitops [ready]: 66275 Testing unit/client-eviction [ready]: 66276 Testing unit/dump [ready]: 66277 Testing unit/expire [ready]: 66278 Testing unit/functions [ready]: 66279 Testing unit/geo [ready]: 66280 Testing unit/hyperloglog [ready]: 66282 Testing unit/info-command [ready]: 66281 Testing unit/info-keysizes [ready]: 66283 Testing unit/info [ready]: 66284 Testing unit/introspection-2 [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: EXPIRE - set timeouts multiple times (0 ms) [ok]: BITCOUNT against wrong type (0 ms) [ok]: KEYSIZES - Test i'th bin counts keysizes between (2^i) and (2^(i+1)-1) as expected (1 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: info command with at most one sub command (2 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Connections start with the default user (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: info command with multiple sub-sections (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: Coverage: ACL USERS (1 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: Test selector syntax error reports the error in the selector context (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: FUNCTION - Test uncompiled script (1 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: GEOADD create (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: New users start disabled (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: GEOADD update (0 ms) [ok]: Test flexible selector definition (1 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: Test separate read permission (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: FUNCTION - test fcall bad arguments (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: Test separate write permission (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: Validate read and write permissions format - empty selector (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: By default users are not able to access any key (1 ms) [ok]: Validate read and write permissions format - empty pattern (0 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: Validate read and write permissions format - no pattern (0 ms) [ok]: Check geoset values (0 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: FUNCTION - test loading from rdb (2 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (0 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (1 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (0 ms) [ok]: Test SET with separate write permission (0 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: Test SET with read and write permissions (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (0 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: GEODIST missing elements (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: GEOSEARCH the box spans -180° or 180° (0 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (0 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: RESTORE can set LFU (12 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: client evicted due to large argv (44 ms) [ok]: ACL GETUSER provides reasonable results (12 ms) [ok]: ACL GETUSER provides correct results (4 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (4 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (0 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (0 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (0 ms) [ok]: ACLLOG - zero max length is correctly handled (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (2 ms) [ok]: ACL LOG entries are still present on update of max len config (0 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (1 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: client evicted due to large query buf (31 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (3 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (3 ms) [ok]: client evicted due to percentage of maxmemory (9 ms) [1/96 done]: unit/info-command (0 seconds) Testing unit/introspection [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (76 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: latencystats: disable/enable (1 ms) [ok]: latencystats: configure percentiles (1 ms) [ok]: latencystats: bad configure percentiles (2 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: client evicted due to large multi buf (57 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: errorstats: failed call NOGROUP error (0 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: BITFIELD overflow detection fuzzing (192 ms) [ok]: default: load from include file, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (1 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: ACL LOAD only disconnects affected clients (1 ms) [ok]: Test behavior of loading ACLs (0 ms) [ok]: CLIENT INFO (1 ms) [ok]: ACL LOAD disconnects affected subscriber (1 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: ACL LOAD disconnects clients of deleted users (2 ms) [ok]: ACL load and save (2 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: BITCOUNT fuzzing without start/end (240 ms) [ok]: errorstats: limit errors will not increase indefinitely (88 ms) [2/96 done]: unit/acl-v2 (0 seconds) Testing unit/keyspace [ok]: MIGRATE is caching connections (226 ms) [ok]: KEYSIZES - Histogram of values of Bytes, Kilo and Mega (329 ms) [ok]: stats: eventloop metrics (111 ms) [ok]: FUNCTION - test function kill (403 ms) [ok]: BITFIELD overflow wrap fuzzing (241 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (1 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: ACL load on replica when connected to replica (0 ms) [ok]: DEL against a single item (1 ms) [ok]: Vararg DEL (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: KEYS with pattern (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: DBSIZE (0 ms) [ok]: KEYS with hashtag (1 ms) [ok]: DEL all keys (0 ms) [ok]: HyperLogLog self test passes (509 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: client evicted due to watched key list (401 ms) [ok]: BITCOUNT fuzzing with start/end (460 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT with illegal arguments (0 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: Default user has access to all channels irrespective of flag (0 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: FUNCTION - test script kill not working on function (403 ms) [ok]: BITFIELD: setup slave (107 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: HyperLogLogs are promote from sparse to dense (347 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (35 ms) [ok]: BITOP and fuzzing (210 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [3/96 done]: unit/bitfield (1 seconds) Testing unit/latency-monitor [ok]: BITOP or fuzzing (166 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (2 ms) [ok]: FUNCTION - async function flush rebuilds Lua VM without causing race condition between main and lazyfree thread (72 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: BITOP xor fuzzing (279 ms) [ok]: BITOP NOT fuzzing (30 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS against wrong type (0 ms) [ok]: BITPOS will illegal arguments (0 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: HyperLogLog sparse encoding stress test (615 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (1 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (149 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: COPY basic usage for list - quicklist (44 ms) [ok]: COPY basic usage for list - listpack (0 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (13 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (11 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: COPY basic usage for hashtable hash (15 ms) [ok]: Test loading duplicate users in config on startup (13 ms) [ok]: Connect a replica to the master instance (105 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (3 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (153 ms) [ok]: For unauthenticated clients output buffer is limited (1500 ms) [ok]: client evicted due to pubsub subscriptions (1185 ms) [ok]: COPY basic usage for stream (87 ms) [ok]: COPY basic usage for stream-cgroups (5 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (5 ms) [ok]: RANDOMKEY against empty DB (1 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Regression for pattern matching very long nested loops (2 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (1 ms) [ok]: client evicted due to tracking redirection (40 ms) [ok]: Disconnecting the replica from master instance (101 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [4/96 done]: unit/keyspace (1 seconds) Testing unit/lazyfree [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (167 ms) [5/96 done]: unit/bitops (2 seconds) Testing unit/limits [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: stats: instantaneous metrics (1602 ms) [ok]: ACL from config file and config rewrite (205 ms) [6/96 done]: unit/acl (2 seconds) Testing unit/maxmemory [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: stats: debug metrics (112 ms) [ok]: stats: client input and output buffer limit disconnections (62 ms) [ok]: clients: pubsub clients (2 ms) [ok]: clients: watching clients (9 ms) [ok]: UNLINK can reclaim memory in background (248 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2001 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (2 ms) [ok]: CLIENT command unhappy path coverage (2 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (38 ms) [ok]: CLIENT KILL close the client connection during bgsave (105 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (44 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (46 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (3 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (251 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (46 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (0 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (261 ms) [7/96 done]: unit/info (2 seconds) Testing unit/memefficiency [ok]: lazy free a stream with all types of metadata (55 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [ok]: FLUSHALL SYNC optimized to run in bg as blocking FLUSHALL ASYNC (39 ms) [ok]: Run consecutive blocking FLUSHALL ASYNC successfully (2 ms) [ok]: FLUSHALL SYNC in MULTI not optimized to run as blocking FLUSHALL ASYNC (1 ms) [ok]: MONITOR log blocked command only once (102 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (329 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (1 ms) [ok]: Check if maxclients works refusing connections (906 ms) [ok]: Memory efficiency with values in range 32 (322 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [8/96 done]: unit/limits (1 seconds) Testing unit/multi [ok]: eviction due to output buffers of pubsub, client eviction: false (552 ms) [ok]: MASTERAUTH test with binary password rdbchannel=yes (1009 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (48 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (1 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (1 ms) [ok]: EXEC fail on lazy expired WATCHed key (103 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: Memory efficiency with values in range 64 (341 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (260 ms) [ok]: CONFIG save params special case handled properly (800 ms) [ok]: CONFIG sanity (19 ms) [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (1 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (2 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (121 ms) [ok]: CONFIG REWRITE sanity (159 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (0 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (1 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: Memory efficiency with values in range 128 (344 ms) [9/96 done]: unit/functions (3 seconds) Testing unit/networking [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (150 ms) [ok]: CONFIG SET port number (215 ms) [ok]: MASTERAUTH test with binary password rdbchannel=no (907 ms) [ok]: Memory efficiency with values in range 1024 (366 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (322 ms) [10/96 done]: unit/auth (4 seconds) Testing unit/obuf-limits [ok]: CONFIG SET bind address (225 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (660 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (0 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: CONFIG SET client-output-buffer-limit (2 ms) [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: redis-server command line arguments - error cases (98 ms) [ok]: WATCH will consider touched expired keys (1105 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: DISCARD should UNWATCH all the keys (0 ms) [ok]: MULTI / EXEC is not propagated (single write command) (47 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (371 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (215 ms) [ok]: Test latency events logging (3403 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: CONFIG SET bind-source-addr (522 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (99 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (225 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (332 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (226 ms) [ok]: Default bind address configuration handling (224 ms) [ok]: Protected mode works as expected (3 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (346 ms) [11/96 done]: unit/networking (2 seconds) Testing unit/oom-score-adj [ok]: Memory efficiency with values in range 16384 (1174 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (223 ms) [12/96 done]: unit/memefficiency (3 seconds) Testing unit/other [ok]: CONFIG SET oom-score-adj works as expected (9 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [13/96 done]: unit/oom-score-adj (0 seconds) Testing unit/pause [ok]: Coverage: HELP commands (2 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: SAVE - make sure there are all the types as values (2 ms) [ok]: Redis should actively expire keys incrementally (703 ms) [ok]: MULTI and script timeout (403 ms) [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (373 ms) [ok]: FUZZ stresser with data model binary (432 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (345 ms) [ok]: EXEC and script timeout (402 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (415 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (102 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (0 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (2 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: Test both active and passive expires are skipped during client pause (102 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: MULTI-EXEC body and script timeout (403 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: FUZZ stresser with data model alpha (487 ms) [ok]: redis-server command line arguments - save with empty input (1125 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (6 ms) [14/96 done]: unit/pause (1 seconds) Testing unit/printver [ok]: Client closed in the middle of blocking FLUSHALL ASYNC (3853 ms) [ok]: Pending commands in querybuf processed once unblocking FLUSHALL ASYNC (1 ms) [ok]: Redis should lazy expire keys (1002 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (488 ms) Testing Redis version 8.0.0 (00000000) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (225 ms) [15/96 done]: unit/printver (0 seconds) Testing unit/protocol [ok]: just EXEC and script timeout (403 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (2 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: FUZZ stresser with data model compr (410 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: MULTI propagation of PUBLISH (95 ms) [ok]: Handle an empty query (42 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (0 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (2 ms) [ok]: Negative multibulk length (46 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (1 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (424 ms) [ok]: Protocol desync regression test #1 (27 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: Protocol desync regression test #2 (27 ms) [ok]: Protocol desync regression test #3 (27 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: bulk reply protocol (1 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: cannot modify protected configuration - local (3 ms) [ok]: test large number of args (30 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (426 ms) [ok]: MULTI with BGREWRITEAOF (203 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1001 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: MULTI with config set appendonly (205 ms) [ok]: MULTI with config error (0 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (436 ms) [ok]: MULTI with FLUSHALL and AOF (3 ms) [ok]: FLUSHALL and bgsave (1003 ms) [16/96 done]: unit/multi (5 seconds) Testing unit/pubsub [ok]: BGSAVE (76 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: Pub/Sub PING on RESP2 (0 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: PubSub messages with CLIENT REPLY OFF (87 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (455 ms) [ok]: Keyspace notifications: we receive keyspace notifications (47 ms) [ok]: config during loading (1149 ms) [ok]: Operations in no-touch mode TOUCH alters the last access time of a key (1101 ms) [ok]: Keyspace notifications: we receive keyevent notifications (46 ms) [ok]: Keyspace notifications: we can receive both kind of events (0 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Unblocks client blocked on lazyfree via REPLICAOF command (1899 ms) [ok]: Client output buffer hard limit is enforced (4060 ms) [17/96 done]: unit/lazyfree (7 seconds) Testing unit/pubsubshard [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (356 ms) [ok]: Check consistency of different data types after a reload (502 ms) [ok]: CONFIG REWRITE handles rename-command properly (334 ms) [ok]: PubSubShard with CLIENT REPLY OFF (85 ms) [ok]: Keyspace notifications: hash events test (listpackex) (398 ms) [ok]: Same dataset digest if saving/reloading as AOF? (191 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (104 ms) [ok]: LATENCY GRAPH can output the expire event graph (1 ms) [ok]: LATENCY of expire events are correctly collected (4327 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (381 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (1 ms) [18/96 done]: unit/latency-monitor (8 seconds) Testing unit/querybuf [ok]: Keyspace notifications: hash events test (hashtable) (398 ms) [ok]: Keyspace notifications: stream events test (1 ms) [ok]: CONFIG REWRITE handles alias config properly (672 ms) [ok]: Keyspace notifications: expired events (triggered expire) (202 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (384 ms) [ok]: Operations in no-touch mode TOUCH from script alters the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (1 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (1 ms) [ok]: command stats for scripts (2 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (3 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (1 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (0 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [ok]: IO threads client number (217 ms) [19/96 done]: unit/introspection-2 (9 seconds) Testing unit/quit [ok]: Keyspace notifications: expired events (background expire) (299 ms) [ok]: QUIT returns OK (1 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Pipelined commands after QUIT must not be executed (0 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (0 ms) [ok]: Keyspace notifications: new key test (0 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (0 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2025 ms) [ok]: Clients are evenly distributed among io threads (217 ms) [20/96 done]: unit/introspection (9 seconds) Testing unit/replybufsize [21/96 done]: unit/quit (0 seconds) Testing unit/scan [22/96 done]: unit/pubsub (1 seconds) Testing unit/scripting [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (386 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (76 ms) [23/96 done]: unit/pubsubshard (1 seconds) Testing unit/shutdown [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: {standalone} SCAN basic (52 ms) [ok]: First server should have role slave after REPLICAOF (0 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (4 ms) [ok]: {standalone} SCAN COUNT (58 ms) [ok]: {standalone} SCAN MATCH (46 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (112 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (184 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: {standalone} SCAN TYPE (72 ms) [ok]: {standalone} SCAN unknown type (48 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: {standalone} SCAN with expired keys (54 ms) [ok]: KEYSIZES - Test hyperloglog (9814 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (303 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (57 ms) [ok]: {standalone} SSCAN with encoding intset (1 ms) [ok]: {standalone} SSCAN with encoding listpack (1 ms) [ok]: {standalone} SSCAN with encoding hashtable (3 ms) [ok]: {standalone} HSCAN with encoding listpack (1 ms) [ok]: {standalone} HSCAN with large value listpack (0 ms) [ok]: Temp rdb will be deleted in signal handle (94 ms) [ok]: {standalone} HSCAN with encoding hashtable (77 ms) [ok]: {standalone} HSCAN with large value hashtable (1 ms) [ok]: {standalone} ZSCAN with encoding listpack (1 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: KEYSIZES - Test List (107 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: {standalone} ZSCAN with encoding skiplist (70 ms) [ok]: {standalone} SCAN guarantees check under write load (17 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {standalone} SSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (0 ms) [ok]: {standalone} ZSCAN with PATTERN (1 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (33 ms) [ok]: verify reply buffer limits (650 ms) [ok]: Regression for a crash with cron release of client arguments (3001 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (97 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [24/96 done]: unit/replybufsize (1 seconds) Testing unit/slowlog [ok]: KEYSIZES - Test SET (257 ms) [25/96 done]: unit/protocol (4 seconds) Testing unit/sort [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: KEYSIZES - Test ZSET (108 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (98 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: KEYSIZES - Test STRING (105 ms) [26/96 done]: unit/shutdown (1 seconds) Testing unit/tls [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - zero max length is correctly handled (4 ms) [ok]: SLOWLOG - max entries is correctly handled (4 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [ok]: Quicklist: SORT BY key (8 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Quicklist: SORT BY hash field (8 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2107 ms) [27/96 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: SLOWLOG - logged entry sanity check (200 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (2 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (3 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (0 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (200 ms) [ok]: KEYSIZES - Test HASH (listpackex) (622 ms) [ok]: SLOWLOG - can clean older entries (200 ms) [ok]: KEYSIZES - Test Hash field lazy expiration (listpackex) (86 ms) [ok]: EVAL does not leak in the Lua stack (674 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Script return recursive object (109 ms) [ok]: SLOWLOG - can be disabled (401 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: Script check unpack with massive arguments (40 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (913 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: query buffer resized correctly (2772 ms) [28/96 done]: unit/slowlog (2 seconds) Testing unit/violations [ok]: Client output buffer soft limit is enforced if time is overreached (3552 ms) [ok]: client evicted due to client tracking prefixes (10176 ms) [ok]: query buffer resized correctly when not idle (73 ms) [ok]: client evicted due to output buf (14 ms) [ok]: client no-evict on (29 ms) [ok]: SORT adds integer field to list (0 ms) [ok]: client no-evict off (31 ms) [ok]: APPEND fuzzing (180 ms) [ok]: KEYSIZES - Test HASH (hashtable) (609 ms) [ok]: FLUSHDB (56 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (2 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [29/96 done]: unit/violations (0 seconds) Testing unit/wait [ok]: KEYSIZES - Test Hash field lazy expiration (hashtable) (86 ms) [ok]: KEYSIZES - Test STRING BITS (2 ms) [ok]: KEYSIZES - Test RESTORE (1 ms) [ok]: KEYSIZES - Test RENAME (1 ms) [ok]: KEYSIZES - Test MOVE (0 ms) [ok]: KEYSIZES - Test SWAPDB (0 ms) [ok]: KEYSIZES - DEBUG RELOAD reset keysizes (4 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (1 ms) [ok]: RESP3 based basic invalidation (0 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (0 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (0 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (0 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: avoid client eviction when client is freed by output buffer limit (71 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Tracking invalidation message of eviction keys should be before response (2 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (76 ms) [ok]: KEYSIZES - Test RDB (194 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (1 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: Tracking gets notification on tracking table key eviction (72 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (2 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Redis should not propagate the read command on lazy expire (96 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (84 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: KEYSIZES - Test i'th bin counts keysizes between (2^i) and (2^(i+1)-1) as expected (replica) (103 ms) [ok]: Don't rehash if redis has child process (321 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (199 ms) [ok]: Tracking info is correct (3 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (1 ms) [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: RESP2 based basic invalidation with client reply off (46 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: Timedout script link is still usable after Lua returns (140 ms) [ok]: Process title set as expected (1 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: KEYSIZES - Histogram of values of Bytes, Kilo and Mega (replica) (333 ms) [ok]: decrease maxmemory-clients causes client eviction (536 ms) [30/96 done]: unit/tracking (2 seconds) Testing unit/type/hash-field-expire [ok]: Big Quicklist: SORT BY key (438 ms) [ok]: Big Quicklist: SORT BY key with limit (7 ms) [ok]: HEXPIRE/HEXPIREAT/HPEXPIRE/HPEXPIREAT - Returns array if the key does not exist (0 ms) [ok]: HEXPIRE/HEXPIREAT/HPEXPIRE/HPEXPIREAT - Verify that the expire time does not overflow (0 ms) [ok]: HPEXPIRE(AT) - Test 'NX' flag (listpackex) (1 ms) [ok]: HPEXPIRE(AT) - Test 'XX' flag (listpackex) (1 ms) [ok]: HPEXPIRE(AT) - Test 'GT' flag (listpackex) (1 ms) [ok]: HPEXPIRE(AT) - Test 'LT' flag (listpackex) (1 ms) [ok]: HPEXPIREAT - field not exists or TTL is in the past (listpackex) (0 ms) [ok]: HPEXPIRE - wrong number of arguments (listpackex) (0 ms) [ok]: HPEXPIRE - parameter expire-time near limit of 2^46 (listpackex) (1 ms) [ok]: Lazy Expire - fields are lazy deleted (listpackex) (6 ms) [ok]: Timedout scripts and unblocked command (402 ms) [ok]: evict clients only until below limit (103 ms) [ok]: Active Expire - deletes hash that all its fields got expired (listpackex) (295 ms) [ok]: HPEXPIRE - Flushall deletes all pending expired fields (listpackex) (1 ms) [ok]: HTTL/HPTTL - Returns array if the key does not exist (0 ms) [ok]: HTTL/HPTTL - Input validation gets failed on nonexists field or field without expire (listpackex) (1 ms) [ok]: HTTL/HPTTL - returns time to live in seconds/msillisec (listpackex) (0 ms) [ok]: HEXPIRETIME/HPEXPIRETIME - Returns array if the key does not exist (0 ms) [ok]: HEXPIRETIME - returns TTL in Unix timestamp (listpackex) (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: Big Quicklist: SORT BY hash field (435 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: evict clients in right order (large to small) (121 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1082 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Hash table: SORT BY key (10 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: Hash table: SORT BY hash field (9 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: client total memory grows during client no-evict (126 ms) [ok]: client total memory grows during maxmemory-clients disabled (126 ms) [31/96 done]: unit/client-eviction (14 seconds) Testing unit/type/hash [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: HRANDFIELD - listpack (5 ms) [ok]: HRANDFIELD - hashtable (6 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: HRANDFIELD with - hashtable (90 ms) [ok]: HRANDFIELD with - listpack (89 ms) [ok]: HTTL/HPTTL - Verify TTL progress until expiration (listpackex) (1012 ms) [ok]: HPEXPIRE - DEL hash with non expired fields (valgrind test) (listpackex) (0 ms) [ok]: HEXPIREAT - Set time in the past (listpackex) (0 ms) [ok]: HEXPIREAT - Set time and then get TTL (listpackex) (1 ms) [ok]: Lazy Expire - delete hash with expired fields (listpackex) (5 ms) [ok]: Test HRANDFIELD deletes all expired fields (listpackex) (28 ms) [ok]: Lazy Expire - HLEN does count expired fields (listpackex) (11 ms) [ok]: Lazy Expire - HSCAN does not report expired fields (listpackex) (12 ms) [ok]: HSET/HLEN - Big hash creation (71 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: HGET against the big hash (51 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: Test HSCAN with mostly expired fields return empty result (listpackex) (120 ms) [ok]: HMSET - big hash (56 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (0 ms) [ok]: Lazy Expire - verify various HASH commands handling expired fields (listpackex) (9 ms) [ok]: A field with TTL overridden with another value (TTL discarded) (listpackex) (5 ms) [ok]: Modify TTL of a field (listpackex) (16 ms) [ok]: Test return value of set operation (listpackex) (0 ms) [ok]: HMGET - big hash (51 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (9 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (0 ms) [ok]: HGETALL - big hash (18 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (1 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1106 ms) [ok]: Test HGETALL not return expired fields (listpackex) (101 ms) [ok]: HSTRLEN against the big hash (47 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: HGETDEL input validation (1 ms) [ok]: HGETDEL basic test (1 ms) [ok]: HGETDEL test with non existing fields (0 ms) [ok]: HGETDEL basic test (1 ms) [ok]: HGETDEL test with non existing fields (0 ms) [ok]: Test RENAME hash with fields to be expired (listpackex) (76 ms) [ok]: HGETDEL propagated as HDEL command to replica (65 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (27 ms) [ok]: Hash fuzzing #2 - 10 fields (13 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: Test RENAME hash that had HFEs but not during the rename (listpackex) (92 ms) [ok]: query buffer resized correctly with fat argv (2928 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (14789 ms) [ok]: MOVE to another DB hash with fields to be expired (listpackex) (103 ms) [ok]: Client executes small argv commands using reusable query buffer (1 ms) [32/96 done]: unit/querybuf (6 seconds) Testing unit/type/incr [ok]: Test COPY hash with fields to be expired (listpackex) (200 ms) [ok]: INCR against non existing key (1 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: INCR over 32bit value (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: DECRBY negation overflow (1 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: No negative zero (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (0 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: Test COPY hash that had HFEs but not during the copy (listpackex) (102 ms) [ok]: MIGRATE cached connections are released after some time (15003 ms) [33/96 done]: unit/type/incr (0 seconds) Testing unit/type/list-2 [ok]: Test SWAPDB hash-fields to be expired (listpackex) (102 ms) [ok]: Test SWAPDB hash that had HFEs but not during the swap (listpackex) (102 ms) [ok]: HMGET - returns empty entries if fields or hash expired (listpackex) (6 ms) [ok]: HPERSIST - Returns array if the key does not exist (listpackex) (0 ms) [ok]: HPERSIST - input validation (listpackex) (1 ms) [ok]: HPERSIST - verify fields with TTL are persisted (listpackex) (25 ms) [ok]: HTTL/HPERSIST - Test expiry commands with non-volatile hash (listpackex) (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a hash (1 ms) [ok]: RESTORE hash that had in the past HFEs but not during the dump (61 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a hash with TTL 0 for all fields (1 ms) [ok]: MIGRATE is able to migrate a key between two instances (225 ms) [ok]: HINCRBY - discards pending expired field and reset its value (16 ms) [ok]: HINCRBY - preserve expiration time of the field (1 ms) [ok]: HINCRBYFLOAT - discards pending expired field and reset its value (16 ms) [ok]: HINCRBYFLOAT - preserve expiration time of the field (0 ms) [ok]: GEOSEARCH fuzzy test - byradius (15584 ms) [ok]: HGETDEL - delete field with ttl (listpackex) (31 ms) [ok]: HGETEX - input validation (listpackex) (1 ms) [ok]: HGETEX - input validation (expire time) (listpackex) (1 ms) [ok]: HGETEX - get without setting ttl (listpackex) (0 ms) [ok]: HGETEX - get and set the ttl (listpackex) (1 ms) [ok]: HGETEX - Test 'EX' flag (listpackex) (0 ms) [ok]: HGETEX - Test 'EXAT' flag (listpackex) (0 ms) [ok]: HGETEX - Test 'PX' flag (listpackex) (1 ms) [ok]: HGETEX - Test 'PXAT' flag (listpackex) (0 ms) [ok]: HGETEX - Test 'PERSIST' flag (listpackex) (1 ms) [ok]: HGETEX - Test setting ttl in the past will delete the key (listpackex) (0 ms) [ok]: HGETEX - Test active expiry (listpackex) (1 ms) [ok]: HGETEX - A field with TTL overridden with another value (TTL discarded) (listpackex) (0 ms) [ok]: HGETEX - Test with lazy expiry (listpackex) (6 ms) [ok]: HSETEX - input validation (listpackex) (4 ms) [ok]: HSETEX - Basic test (listpackex) (0 ms) [ok]: HSETEX - Test FXX flag (listpackex) (2 ms) [ok]: HSETEX - Test FXX flag with lazy expire (listpackex) (15 ms) [ok]: HSETEX - Test FNX flag (listpackex) (1 ms) [ok]: HSETEX - Test 'EX' flag (listpackex) (1 ms) [ok]: HSETEX - Test 'EXAT' flag (listpackex) (0 ms) [ok]: HSETEX - Test 'PX' flag (listpackex) (0 ms) [ok]: HSETEX - Test 'PXAT' flag (listpackex) (1 ms) [ok]: HSETEX - Test 'KEEPTTL' flag (listpackex) (0 ms) [ok]: HSETEX - Test no expiry flag discards TTL (listpackex) (0 ms) [ok]: Big Hash table: SORT BY key (431 ms) [ok]: Big Hash table: SORT BY key with limit (11 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: HSETEX - Test with active expiry (101 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: HSETEX - Set time in the past (listpackex) (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: HEXPIRE/HEXPIREAT/HPEXPIRE/HPEXPIREAT - Returns array if the key does not exist (1 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: HEXPIRE/HEXPIREAT/HPEXPIRE/HPEXPIREAT - Verify that the expire time does not overflow (1 ms) [ok]: HPEXPIRE(AT) - Test 'NX' flag (hashtable) (0 ms) [ok]: HPEXPIRE(AT) - Test 'XX' flag (hashtable) (1 ms) [ok]: HPEXPIRE(AT) - Test 'GT' flag (hashtable) (1 ms) [ok]: HPEXPIRE(AT) - Test 'LT' flag (hashtable) (1 ms) [ok]: HPEXPIREAT - field not exists or TTL is in the past (hashtable) (0 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: HPEXPIRE - wrong number of arguments (hashtable) (1 ms) [ok]: HPEXPIRE - parameter expire-time near limit of 2^46 (hashtable) (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Lazy Expire - fields are lazy deleted (hashtable) (6 ms) [ok]: Script delete the expired key (2 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (11 ms) [ok]: TIME command using cached time (11 ms) [ok]: Hash fuzzing #1 - 512 fields (983 ms) [ok]: MIGRATE is able to copy a key between two instances (225 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (216 ms) [ok]: Active Expire - deletes hash that all its fields got expired (hashtable) (299 ms) [ok]: HPEXPIRE - Flushall deletes all pending expired fields (hashtable) (1 ms) [ok]: HTTL/HPTTL - Returns array if the key does not exist (0 ms) [ok]: HTTL/HPTTL - Input validation gets failed on nonexists field or field without expire (hashtable) (1 ms) [ok]: HTTL/HPTTL - returns time to live in seconds/msillisec (hashtable) (1 ms) [ok]: HEXPIRETIME/HPEXPIRETIME - Returns array if the key does not exist (0 ms) [ok]: HEXPIRETIME - returns TTL in Unix timestamp (hashtable) (0 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (1319 ms) [ok]: Big Hash table: SORT BY hash field (442 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (3 ms) [ok]: SORT BY key STORE (0 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (8 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (0 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: {standalone} SCAN regression test for issue #4906 (5764 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (10 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (18 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Test script flush will not leak memory - script:0 (87 ms) [ok]: WAITAOF local copy before fsync (98 ms) [34/96 done]: unit/expire (16 seconds) Testing unit/type/list-3 [ok]: SORT speed, 100 element list BY key, 100 times (16 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (20 ms) [ok]: SORT speed, 100 element list directly, 100 times (14 ms) [ok]: MIGRATE propagates TTL correctly (225 ms) [ok]: SORT speed, 100 element list BY , 100 times (11 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: SORT STORE quicklist with the right options (58 ms) [ok]: Explicit regression for a list bug (0 ms) [ok]: Hash fuzzing #2 - 512 fields (619 ms) [ok]: Regression for quicklist #3343 bug (137 ms) [ok]: Check compression with recompress (43 ms) [ok]: Crash due to wrongly recompress after lrem (230 ms) [ok]: Redis can trigger resizing (1809 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (47 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (47 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5034 ms) [ok]: No response for single command if client output buffer hard limit is enforced (117 ms) [ok]: WAITAOF local copy everysec (902 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (3 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: HTTL/HPTTL - Verify TTL progress until expiration (hashtable) (1012 ms) [ok]: HPEXPIRE - DEL hash with non expired fields (valgrind test) (hashtable) (0 ms) [ok]: HEXPIREAT - Set time in the past (hashtable) (1 ms) [ok]: HEXPIREAT - Set time and then get TTL (hashtable) (0 ms) [ok]: Lazy Expire - delete hash with expired fields (hashtable) (6 ms) [ok]: Test HRANDFIELD deletes all expired fields (hashtable) (27 ms) [ok]: Lazy Expire - HLEN does count expired fields (hashtable) (11 ms) [ok]: Lazy Expire - HSCAN does not report expired fields (hashtable) (11 ms) [ok]: Test HSCAN with mostly expired fields return empty result (hashtable) (127 ms) [ok]: Lazy Expire - verify various HASH commands handling expired fields (hashtable) (10 ms) [ok]: A field with TTL overridden with another value (TTL discarded) (hashtable) (6 ms) [ok]: Modify TTL of a field (hashtable) (15 ms) [ok]: Test return value of set operation (hashtable) (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (898 ms) [ok]: WAITAOF local if AOFRW was postponed (299 ms) [ok]: Hash ziplist of various encodings (91 ms) [ok]: Test HGETALL not return expired fields (hashtable) (101 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: Redis can rewind and trigger smaller slot resizing (706 ms) [ok]: Test RENAME hash with fields to be expired (hashtable) (56 ms) [35/96 done]: unit/type/hash (3 seconds) Testing unit/type/list [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: Test RENAME hash that had HFEs but not during the rename (hashtable) (102 ms) [ok]: packed node check compression with insert and pop (1 ms) [ok]: packed node check compression combined with trim (1 ms) [ok]: packed node check compression with lset (0 ms) [ok]: MOVE to another DB hash with fields to be expired (hashtable) (102 ms) [ok]: WAITAOF replica copy before fsync (82 ms) [ok]: Redis can resize empty dict (218 ms) [ok]: Test COPY hash with fields to be expired (hashtable) (197 ms) [ok]: Test COPY hash that had HFEs but not during the copy (hashtable) (102 ms) [ok]: plain node check compression with insert and pop (368 ms) [ok]: Cross DB command is incompatible with cluster mode (10 ms) [ok]: Function no-cluster flag is incompatible with cluster mode (1 ms) [ok]: Script no-cluster flag is incompatible with cluster mode (1 ms) [ok]: SORT command incompatible operations with cluster mode (3 ms) [ok]: Normal cross slot commands are incompatible with cluster mode (0 ms) [ok]: Transaction is incompatible with cluster mode (2 ms) [ok]: Lua scripts are incompatible with cluster mode (2 ms) [ok]: Shard subscribe commands are incompatible with cluster mode (1 ms) [ok]: Test SWAPDB hash-fields to be expired (hashtable) (102 ms) [ok]: plain node check compression combined with trim (136 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1043 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (15 ms) [ok]: cluster-compatibility-sample-ratio configuration can work (119 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (15 ms) [ok]: Test SWAPDB hash that had HFEs but not during the swap (hashtable) (103 ms) [ok]: HMGET - returns empty entries if fields or hash expired (hashtable) (6 ms) [ok]: HPERSIST - Returns array if the key does not exist (hashtable) (1 ms) [ok]: HPERSIST - input validation (hashtable) (0 ms) [ok]: Obuf limit, KEYS stopped mid-run (43 ms) [36/96 done]: unit/other (13 seconds) Testing unit/type/set [ok]: HPERSIST - verify fields with TTL are persisted (hashtable) (26 ms) [ok]: HTTL/HPERSIST - Test expiry commands with non-volatile hash (hashtable) (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a hash (0 ms) [37/96 done]: unit/obuf-limits (14 seconds) Testing unit/type/stream-cgroups [ok]: RESTORE hash that had in the past HFEs but not during the dump (65 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a hash with TTL 0 for all fields (0 ms) [ok]: HINCRBY - discards pending expired field and reset its value (15 ms) [ok]: HINCRBY - preserve expiration time of the field (1 ms) [ok]: plain node check compression with lset (180 ms) [ok]: {cluster} SCAN basic (58 ms) [ok]: HINCRBYFLOAT - discards pending expired field and reset its value (16 ms) [ok]: HINCRBYFLOAT - preserve expiration time of the field (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (10 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: HGETDEL - delete field with ttl (hashtable) (31 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: HGETEX - input validation (hashtable) (1 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: HGETEX - input validation (expire time) (hashtable) (1 ms) [ok]: HGETEX - get without setting ttl (hashtable) (1 ms) [ok]: HGETEX - get and set the ttl (hashtable) (0 ms) [ok]: HGETEX - Test 'EX' flag (hashtable) (0 ms) [ok]: HGETEX - Test 'EXAT' flag (hashtable) (0 ms) [ok]: HGETEX - Test 'PX' flag (hashtable) (0 ms) [ok]: HGETEX - Test 'PXAT' flag (hashtable) (0 ms) [ok]: HGETEX - Test 'PERSIST' flag (hashtable) (1 ms) [ok]: HGETEX - Test setting ttl in the past will delete the key (hashtable) (1 ms) [ok]: HGETEX - Test active expiry (hashtable) (0 ms) [ok]: HGETEX - A field with TTL overridden with another value (TTL discarded) (hashtable) (1 ms) [ok]: SADD a non-integer against a large intset (11 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: HGETEX - Test with lazy expiry (hashtable) (6 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: HSETEX - input validation (hashtable) (4 ms) [ok]: HSETEX - Basic test (hashtable) (0 ms) [ok]: HSETEX - Test FXX flag (hashtable) (2 ms) [ok]: {cluster} SCAN COUNT (63 ms) [ok]: SADD an integer larger than 64 bits to a large intset (11 ms) [ok]: HSETEX - Test FXX flag with lazy expire (hashtable) (15 ms) [ok]: HSETEX - Test FNX flag (hashtable) (1 ms) [ok]: HSETEX - Test 'EX' flag (hashtable) (1 ms) [ok]: HSETEX - Test 'EXAT' flag (hashtable) (0 ms) [ok]: HSETEX - Test 'PX' flag (hashtable) (0 ms) [ok]: HSETEX - Test 'PXAT' flag (hashtable) (1 ms) [ok]: HSETEX - Test 'KEEPTTL' flag (hashtable) (1 ms) [ok]: HSETEX - Test no expiry flag discards TTL (hashtable) (0 ms) [ok]: XPENDING with IDLE (23 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (2 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (0 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: {cluster} SCAN MATCH (48 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (22 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (0 ms) [ok]: sort get # in cluster mode (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (2 ms) [ok]: sort_ro by in cluster mode (0 ms) [ok]: sort_ro get in cluster mode (0 ms) [ok]: sort_ro get # in cluster mode (0 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (54 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: XREAD and XREADGROUP against wrong parameter (0 ms) [ok]: Blocking XREAD: key deleted (0 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (16 ms) [ok]: Test LPUSH and LPOP on plain nodes (3 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (27 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (3 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (46 ms) [ok]: HSETEX - Test with active expiry (101 ms) [ok]: HSETEX - Set time in the past (hashtable) (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: {cluster} SCAN TYPE (78 ms) [38/96 done]: unit/sort (8 seconds) Testing unit/type/stream [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: Test LSET with packed / plain combinations (92 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: {cluster} SCAN unknown type (51 ms) [ok]: {cluster} SCAN with expired keys (59 ms) [ok]: XADD wrong number of args (1 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (1 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (57 ms) [ok]: {cluster} SSCAN with encoding intset (1 ms) [ok]: {cluster} SSCAN with encoding listpack (1 ms) [ok]: {cluster} SSCAN with encoding hashtable (3 ms) [ok]: {cluster} HSCAN with encoding listpack (1 ms) [ok]: {cluster} HSCAN with large value listpack (0 ms) [ok]: Statistics - Hashes with HFEs (hashtable) (203 ms) [ok]: HFE commands against wrong type (1 ms) [ok]: Set encoding after DEBUG RELOAD (174 ms) [ok]: SREM basics - $type (1 ms) [ok]: XADD with MAXLEN option (69 ms) [ok]: Test LSET with packed consist only one item (175 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: SREM basics - $type (12 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (3 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (0 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: {cluster} HSCAN with encoding hashtable (75 ms) [ok]: {cluster} HSCAN with large value hashtable (1 ms) [ok]: {cluster} ZSCAN with encoding listpack (2 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (1 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (20 ms) [ok]: XADD with MAXLEN option and the '=' argument (69 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (6 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (6 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: {cluster} ZSCAN with encoding skiplist (73 ms) [ok]: XADD with MAXLEN option and the '~' argument (56 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: {cluster} SCAN guarantees check under write load (20 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with NOVALUES (1 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (8 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (1 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (5 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (31 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (16 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: XADD with MINID option (69 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: Test listpack memory usage (0 ms) [ok]: Test listpack object encoding (0 ms) [ok]: Test listpack debug listpack (1 ms) [ok]: Test LSET with packed / plain combinations (186 ms) [ok]: Test LSET with packed is split in the middle (8 ms) [ok]: Test listpack converts to ht and passive expiry works (51 ms) [ok]: Test LSET with packed consist only one item (183 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Test listpack converts to ht and active expiry works (251 ms) [ok]: LPOS basic usage - quicklist (46 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (88 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: Test listpack converts to ht and active expiry works (193 ms) [ok]: WAITAOF replica copy everysec (1716 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (46 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (2 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (1 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (0 ms) [ok]: HPERSIST/HEXPIRE - Test listpack with large values (67 ms) [ok]: BLPOP: single existing list - quicklist (42 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1095 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (3 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (0 ms) [ok]: BLPOP: multiple existing lists - quicklist (90 ms) [ok]: BLPOP: second list has an entry - quicklist (47 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (46 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (90 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: BLMOVE left right - quicklist (44 ms) [ok]: BLMOVE right left - quicklist (43 ms) [ok]: BLMOVE right right - quicklist (58 ms) [ok]: BLPOP: single existing list - listpack (4 ms) [ok]: BLPOP: multiple existing lists - listpack (3 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (2 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (3 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (2 ms) [ok]: Test Command propagated to replica as expected (listpack) (430 ms) [ok]: BLMOVE left right - listpack (12 ms) [ok]: BLMOVE right left - listpack (9 ms) [ok]: BLMOVE right right - listpack (6 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (3 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (4 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (20 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (6 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (3 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (3 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (0 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: XCLAIM can claim PEL items from another consumer (604 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Lazy Expire - fields are lazy deleted and propagated to replicas (listpack) (223 ms) [ok]: XCLAIM without JUSTID increments delivery count (402 ms) [ok]: XADD mass insertion and XLEN (1667 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: All TTLs in commands are propagated as absolute timestamp in milliseconds in AOF (209 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (23 ms) [ok]: XCLAIM same consumer (201 ms) [ok]: HRANDFIELD delete expired fields and propagate DELs to replica (116 ms) [ok]: XRANGE can be used to iterate the whole stream (309 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (75 ms) [ok]: LTRIM stress testing - quicklist (5630 ms) [ok]: BRPOPLPUSH timeout (1004 ms) [ok]: SWAPDB awakes blocked client (2 ms) [ok]: Test HSETEX command replication (169 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (604 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (203 ms) [ok]: Test HGETEX command replication (131 ms) [ok]: WAITAOF replica copy everysec with AOFRW (2007 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (2 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XINFO FULL output (4 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (299 ms) [ok]: SDIFF fuzzing (2807 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: Test Command propagated to replica as expected (ht) (318 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (0 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (0 ms) [ok]: SRANDMEMBER - listpack (6 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (6 ms) [ok]: SPOP integer from listpack set (0 ms) [ok]: SPOP with - listpack (2 ms) [ok]: SPOP with - intset (2 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: Consumer seen-time and active-time (204 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (2 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: XREADGROUP of multiple entries changes dirty by one (2 ms) [ok]: XREADGROUP from PEL does not change dirty (4 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (97 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (13 ms) [ok]: SRANDMEMBER with - intset (12 ms) [ok]: SRANDMEMBER with - hashtable (15 ms) [ok]: Verify Lua performs GC correctly after script loading (5702 ms) [ok]: Lazy Expire - fields are lazy deleted and propagated to replicas (ht) (222 ms) [ok]: XREADGROUP with NOACK creates consumer (4 ms) [ok]: SRANDMEMBER histogram distribution - listpack (55 ms) [ok]: SRANDMEMBER histogram distribution - intset (54 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (105 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (56 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (1 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (4 ms) [ok]: Consumer group lag with XDELs (7 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (3 ms) [ok]: Consumer group lag with XTRIM (5 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: MIGRATE can correctly transfer large values (5973 ms) [ok]: All TTLs in commands are propagated as absolute timestamp in milliseconds in AOF (211 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (184 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (14 ms) [ok]: SCRIPTING FLUSH ASYNC (7 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (1 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (5 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (104 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1561 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MIGRATE can correctly transfer hashes (226 ms) [ok]: HRANDFIELD delete expired fields and propagate DELs to replica (117 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (103 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (7 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: Test HSETEX command replication (51 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (105 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (4 ms) [ok]: XREADGROUP ACK would propagate entries-read (4 ms) [ok]: XREADGROUP from PEL inside MULTI (1 ms) [ok]: Test HGETEX command replication (131 ms) [39/96 done]: unit/type/hash-field-expire (10 seconds) Testing unit/type/string [ok]: SET and GET an item (1 ms) [ok]: SET and GET an empty item (1 ms) [ok]: MIGRATE timeout actually works (632 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (104 ms) [ok]: Very big payload in GET/SET (54 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [40/96 done]: unit/type/stream-cgroups (5 seconds) Testing unit/type/zset [ok]: MIGRATE can migrate multiple keys at once (216 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: XREAD with non empty second stream (852 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (0 ms) [ok]: Blocking XREAD will not reply with an empty array (62 ms) [ok]: Check encoding - listpack (1 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZINCRBY accepts hexadecimal inputs - listpack (1 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (1 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2007 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (3 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (4 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (5 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (3 ms) [ok]: ZLEXCOUNT advanced - listpack (2 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (6 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD last element from non-empty stream (0 ms) [ok]: XREAD last element from empty stream (1 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (0 ms) [ok]: XREAD last element from multiple streams (0 ms) [ok]: XREAD last element with count > 1 (0 ms) [ok]: XREAD: read last element after XDEL (issue #13628) (0 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (13 ms) [ok]: XDEL multiply id test (1 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: ZREMRANGEBYLEX basics - listpack (15 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (2 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (220 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (104 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: EVAL does not leak in the Lua stack (309 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (91 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (219 ms) [ok]: MGET: mget shouldn't be propagated in Lua (101 ms) [ok]: BLPOP: timeout (1073 ms) [ok]: BLPOP: arguments are empty (2 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (101 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (219 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (221 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (323 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [41/96 done]: unit/dump (24 seconds) Testing unit/cluster/announced-endpoints [ok]: Script return recursive object (108 ms) [ok]: Script check unpack with massive arguments (41 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: XDEL fuzz test (1354 ms) [ok]: BRPOP: timeout (1075 ms) [ok]: BRPOP: arguments are empty (2 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (23 ms) [ok]: BLMPOP_LEFT: second argument is not a list (0 ms) [ok]: {cluster} SCAN regression test for issue #4906 (6077 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (19 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (85 ms) [42/96 done]: unit/scan (16 seconds) Testing unit/cluster/cli [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: KEYSIZES - Test hyperloglog (replica) (12279 ms) [ok]: Very big payload random access (2043 ms) [ok]: Timedout script link is still usable after Lua returns (147 ms) [ok]: KEYSIZES - Test List (replica) (111 ms) [ok]: KEYSIZES - Test SET (replica) (111 ms) [ok]: WAITAOF replica copy if replica is blocked (1900 ms) [ok]: KEYSIZES - Test ZSET (replica) (117 ms) [ok]: Timedout scripts and unblocked command (406 ms) [ok]: KEYSIZES - Test STRING (replica) (132 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (201 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: BLMPOP_LEFT: timeout (1076 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (0 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (0 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (9274 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (0 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1021 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (1 ms) [ok]: KEYSIZES - Test HASH (listpackex) (replica) (669 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: ZDIFF fuzzing - listpack (2945 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: KEYSIZES - Test Hash field lazy expiration (listpackex) (replica) (148 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (1 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY accepts hexadecimal inputs - skiplist (1 ms) [ok]: ZINCRBY against invalid incr value - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (3 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (1 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (6 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (3 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (7 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (0 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: GEOSEARCH fuzzy test - bybox (11106 ms) [ok]: WAITAOF on promoted replica (300 ms) [ok]: GEOSEARCH box edges fuzzy test (31 ms) [43/96 done]: unit/geo (26 seconds) Testing unit/cluster/cluster-response-tls [44/96 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (102 ms) [ok]: Test change cluster-announce-bus-port at runtime (204 ms) [ok]: CONFIG SET port updates cluster-announced port (1 ms) [ok]: BLMPOP_RIGHT: timeout (1077 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: LTRIM stress testing - listpack (5979 ms) [ok]: KEYSIZES - Test HASH (hashtable) (replica) (667 ms) [45/96 done]: unit/type/list-2 (12 seconds) Testing unit/cluster/hostnames [ok]: KEYSIZES - Test Hash field lazy expiration (hashtable) (replica) (93 ms) [ok]: KEYSIZES - Test STRING BITS (replica) (3 ms) [ok]: KEYSIZES - Test RESTORE (replica) (2 ms) [ok]: KEYSIZES - Test RENAME (replica) (0 ms) [ok]: KEYSIZES - Test MOVE (replica) (1 ms) [ok]: KEYSIZES - Test SWAPDB (replica) (2 ms) [ok]: KEYSIZES - DEBUG RELOAD reset keysizes (replica) (4 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: BLMPOP propagate as pop with count command to replica (199 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [46/96 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: Create 3 node cluster (1923 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (6 ms) [ok]: LPUSHX, RPUSHX - quicklist (48 ms) [ok]: Verify command got unblocked after resharding (42 ms) [ok]: LINSERT - quicklist (47 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: Wait for cluster to be stable (10 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: LINDEX consistency test - listpack (50 ms) [ok]: KEYSIZES - Test RDB (replica) (196 ms) [ok]: LINDEX random access - listpack (36 ms) [47/96 done]: unit/info-keysizes (27 seconds) Testing unit/cluster/internal-secret [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (56 ms) [ok]: LINDEX consistency test - listpack (76 ms) [ok]: LINDEX random access - listpack (54 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (108 ms) [ok]: LINDEX consistency test - quicklist (37 ms) [ok]: LINDEX random access - quicklist (26 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (62 ms) [ok]: LINDEX consistency test - quicklist (75 ms) [ok]: LINDEX random access - quicklist (53 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (105 ms) [ok]: LLEN against non-list value error (1 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (45 ms) [ok]: LMOVE left left base case - quicklist (47 ms) [ok]: LMOVE left right base case - quicklist (47 ms) [ok]: LMOVE right left base case - quicklist (47 ms) [ok]: LMOVE right right base case - quicklist (47 ms) [ok]: Test scripting debug protocol parsing (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (46 ms) [ok]: Test scripting debug lua stack overflow (2 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (44 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (93 ms) [ok]: Lua scripts eviction does not generate many scripts (84 ms) [ok]: SETNX against expired volatile key (2518 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (1 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2010 ms) [ok]: Kill a cluster node and wait for fail state (1364 ms) [ok]: Lua scripts eviction is plain LRU (41 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (94 ms) [ok]: GETDEL propagate as DEL command to replica (60 ms) [ok]: Verify command got unblocked after cluster failure (68 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (93 ms) [ok]: Lua scripts eviction does not affect script load (127 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (8 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (0 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (93 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (94 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (48 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (46 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: SETBIT fuzzing (280 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (0 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (42 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (47 ms) [ok]: RPOPLPUSH base case - listpack (2 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (2 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (2 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (45 ms) [ok]: ZDIFF fuzzing - skiplist (2806 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (45 ms) [ok]: ZMPOP propagate as pop with count command to replica (24 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (43 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (701 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: Test script flush will not leak memory - script:1 (87 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (48 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (2 ms) [ok]: LMOVE left right with listpack source and existing target listpack (3 ms) [ok]: LMOVE right left with listpack source and existing target listpack (2 ms) [ok]: LMOVE right right with listpack source and existing target listpack (2 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (2 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (47 ms) [ok]: RPOPLPUSH against non list dst key - listpack (2 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (94 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (2 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Set cluster human announced nodename and let it propagate (104 ms) [ok]: Mass RPOP/LPOP - listpack (37 ms) [ok]: Mass RPOP/LPOP - listpack (74 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: BZMPOP readraw in RESP3 (200 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: LMPOP single existing list - quicklist (141 ms) [ok]: GETRANGE fuzzing (770 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (1 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (7942 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (0 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [48/96 done]: unit/type/string (7 seconds) Testing unit/cluster/links [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (210 ms) [ok]: ZMPOP readraw in RESP2 (4 ms) [ok]: Set cluster hostnames and verify they are propagated (108 ms) [ok]: LMPOP multiple existing lists - quicklist (177 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (3 ms) [ok]: LMPOP propagate as pop with count command to replica (74 ms) [ok]: BZMPOP readraw in RESP2 (192 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (4 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: LRANGE basics - quicklist (48 ms) [ok]: Update hostnames and make sure they are all eventually propagated (210 ms) [ok]: LRANGE inverted indexes - quicklist (46 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (47 ms) [ok]: ZUNIONSTORE result is sorted (116 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (20 ms) [ok]: LRANGE out of range negative end index - quicklist (46 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: ZMSCORE - listpack (23 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (1 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (41 ms) [ok]: WAITAOF master isn't configured to do AOF (1003 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (216 ms) [ok]: ZSET sorting stresser - listpack (36 ms) [ok]: WAITAOF replica isn't configured to do AOF (104 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (106 ms) [ok]: LTRIM basics - quicklist (554 ms) [ok]: LTRIM out of range negative end index - quicklist (90 ms) [ok]: LSET - quicklist (44 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (10 ms) [ok]: LTRIM out of range negative end index - listpack (2 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (43 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (1 ms) [ok]: LREM starting from tail with negative count - quicklist (45 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (46 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (3 ms) [ok]: List listpack -> quicklist encoding conversion (186 ms) [ok]: intsets implementation stress testing (1670 ms) [ok]: List quicklist -> listpack encoding conversion (237 ms) [49/96 done]: unit/type/set (13 seconds) Testing unit/cluster/misc [ok]: List encoding conversion when RDB loading (15 ms) [ok]: List invalid list-max-listpack-size config (47 ms) [ok]: Test internal secret sync (3 ms) [ok]: List of various encodings (50 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (17 ms) [50/96 done]: unit/type/list (15 seconds) Testing unit/cluster/multi-slot-operations [ok]: Verify that single primary marks replica as failed (3110 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1932 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (105 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (1904 ms) [ok]: Join a node to the cluster and make sure it gets the same secret (728 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (182 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3105 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (267 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (23 ms) [ok]: Human nodenames are visible in log messages (3522 ms) [51/96 done]: unit/cluster/human-announced-nodename (6 seconds) Testing unit/cluster/scripting [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (644 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: WAITAOF master sends PING after last write (1202 ms) [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (2 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3817 ms) [ok]: Verify Lua performs GC correctly after script loading (4917 ms) [ok]: Continuous slots distribution (7 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (0 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Test restart will keep hostname information (177 ms) [ok]: Test hostname validation (1 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: Join another cluster, make sure clusters sync on the internal secret (2130 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8666 ms) [ok]: WAITAOF master client didn't send any write command (1201 ms) [ok]: XRANGE fuzzing (10033 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ignore]: experimental test not allowed [52/96 done]: unit/cluster/multi-slot-operations (2 seconds) Testing unit/cluster/sharded-pubsub [ok]: Each node has two links with each peer (3 ms) [ok]: Validate cluster links format (1 ms) [ok]: XTRIM with MAXLEN option basic test (70 ms) [ok]: XADD with LIMIT consecutive calls (7 ms) [ok]: XTRIM with ~ is limited (8 ms) [ok]: no-writes shebang flag on replica (205 ms) [ok]: XTRIM without ~ is not limited (7 ms) [ok]: XTRIM without ~ and with LIMIT (7 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: not enough good replicas (0 ms) [53/96 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: XADD with MAXLEN > xlen can propagate correctly (8 ms) [54/96 done]: unit/cluster/hostnames (8 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (109 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (109 ms) [ok]: XADD with MINID > lastid can propagate correctly (11 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (108 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (6 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (4 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (2 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (1 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (110 ms) [55/96 done]: unit/cluster/scripting (2 seconds) Testing integration/aof-race [ok]: XADD with ~ MAXLEN can propagate correctly (12 ms) [ok]: not enough good replicas state change during long script (620 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (4 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (110 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (109 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (12 ms) [ok]: Consistent eval error reporting (8 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (111 ms) [56/96 done]: unit/scripting (27 seconds) Testing integration/aof [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (109 ms) [ok]: XADD with ~ MINID can propagate correctly (13 ms) [ok]: WAITAOF master client didn't send any command (1203 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [57/96 done]: integration/aof-race (1 seconds) Testing integration/block-repl [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (111 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (14 ms) [58/96 done]: unit/cluster/internal-secret (9 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: Short read: Server should start if load-truncated is yes (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (1 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: Multi Part AOF can start when no aof and no manifest (227 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (12 ms) [ok]: Short read + command: Server should start (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (14 ms) [ok]: ZMSCORE - skiplist (12 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (17 ms) [ok]: ZSET sorting stresser - skiplist (23 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (1 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (227 ms) [ok]: Bad format: Server should have logged an error (1 ms) [59/96 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (3 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (219 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (11 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (7 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec (1 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (0 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: Migrate the last slot away from a node using redis-cli (4035 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (224 ms) [60/96 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Empty stream can be rewrite into AOF correctly (54 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (55 ms) [ok]: RDB load zipmap hash: converts to listpack (0 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (228 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [61/96 done]: unit/type/stream (19 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (109 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (339 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [62/96 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/corrupt-dump [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (250 ms) [63/96 done]: unit/cluster/sharded-pubsub (4 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: #7445 - with sanitize (217 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1517 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (236 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (156 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (225 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (228 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (217 ms) [ok]: corrupt payload: invalid zlbytes header (225 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (22 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (125 ms) [64/96 done]: unit/cluster/slot-ownership (3 seconds) Testing integration/failover [ok]: corrupt payload: valid zipped hash header, dup records (225 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (123 ms) [ok]: corrupt payload: hash listpackex with invalid string TTL (226 ms) [ok]: setup replication for following tests (101 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (104 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (597 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: corrupt payload: hash listpackex with TTL large than EB_EXPIRE_TIME_MAX (224 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (642 ms) [ok]: dismiss all data types memory (1154 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3341 ms) [ok]: corrupt payload: hash listpackex with unordered TTL fields (225 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (332 ms) [ok]: redis-cli -4 --cluster create using 127.0.0.1 with cluster-port (1924 ms) [ok]: corrupt payload: hash listpackex field without TTL should not be followed by field with TTL (226 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (227 ms) [ok]: corrupt payload: hash hashtable with TTL large than EB_EXPIRE_TIME_MAX (216 ms) [ok]: failover command to specific replica works (928 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (236 ms) [ok]: corrupt payload: quicklist big ziplist prev len (218 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (1 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: dismiss client output buffer (885 ms) [ok]: slave buffer are counted correctly (30192 ms) [ok]: corrupt payload: quicklist small ziplist prev len (217 ms) [ok]: dismiss client query buffer (203 ms) [ok]: corrupt payload: quicklist ziplist wrong count (216 ms) [ok]: AOF enable will create manifest file (536 ms) [ok]: Verify that multiple primaries mark replica as failed (6241 ms) [ok]: corrupt payload: #3080 - quicklist (225 ms) [ok]: redis-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1144 ms) [ok]: failover command to any replica works (865 ms) [ok]: corrupt payload: quicklist with empty ziplist (132 ms) [65/96 done]: unit/cluster/failure-marking (14 seconds) Testing integration/logging [ok]: corrupt payload: quicklist encoded_len is 0 (133 ms) [ok]: Crash report generated on SIGABRT (102 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: failover to a replica with force works (329 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (237 ms) [ok]: Stacktraces generated on SIGALRM (102 ms) [ok]: corrupt payload: #3080 - ziplist (218 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (109 ms) [66/96 done]: integration/logging (1 seconds) Testing integration/psync2-master-restart [ok]: dismiss replication backlog (1327 ms) [ok]: failover with timeout aborts if replica never catches up (559 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2328 ms) [ok]: failovers can be aborted (22 ms) [67/96 done]: integration/dismiss-mem (3 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: load corrupted rdb with empty keys (223 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (222 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1455 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (3 ms) [ok]: BZMPOP with multiple blocked clients (4 ms) [ok]: corrupt payload: listpack invalid size header (227 ms) [ok]: failover aborts if target rejects sync request (529 ms) [ok]: BZMPOP propagate as pop with count command to replica (196 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (2 ms) [ok]: corrupt payload: listpack too long entry len (124 ms) [ok]: corrupt payload: listpack very long entry len (121 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (532 ms) [ok]: corrupt payload: listpack too long entry prev len (226 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (113 ms) [ok]: AOF enable/disable auto gc (219 ms) [ok]: corrupt payload: stream with duplicate consumers (217 ms) [ok]: ZSET skiplist order consistency when elements are moved (591 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (5 ms) [ok]: ZRANDMEMBER - skiplist (5 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: AOF can produce consecutive sequence number after reload (104 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1329 ms) [ok]: ZRANDMEMBER with - skiplist (160 ms) [ok]: corrupt payload: hash ziplist with duplicate records (225 ms) [ok]: ZRANDMEMBER with - listpack (160 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (9 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (4 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (345 ms) [68/96 done]: unit/type/zset (20 seconds) Testing integration/psync2-reg [ok]: corrupt payload: hash listpack with duplicate records (225 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8643 ms) [69/96 done]: integration/failover (5 seconds) Testing integration/psync2 [ok]: corrupt payload: hash listpack with duplicate records - convert (121 ms) [ok]: AOF fsync always barrier issue (5330 ms) [ok]: redis-cli -4 --cluster create using localhost with cluster-port (1924 ms) [ok]: setup replication for following tests (101 ms) [ok]: corrupt payload: hash ziplist uneven record count (225 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: AOF will trigger limit when AOFRW fails many times (559 ms) [ok]: Disconnect link when send buffer limit reached (8991 ms) [ok]: corrupt payload: hash duplicate records (216 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: corrupt payload: hash empty zipmap (225 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (101 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (122 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1120 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (683 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (122 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [70/96 done]: unit/wait (32 seconds) Testing integration/rdb [ok]: Link memory increases with publishes (609 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (225 ms) [ok]: test old version rdb file (1 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (43136 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: PSYNC2 #3899 regression: setup (1003 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: redis-cli -4 --cluster add-node using localhost with cluster-port (1178 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (226 ms) [ok]: RDB encoding loading test (5 ms) [ok]: Link memory resets after publish messages flush (371 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (217 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [71/96 done]: unit/cluster/links (15 seconds) Testing integration/redis-benchmark [72/96 done]: unit/cluster/cli (20 seconds) Testing integration/redis-cli [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (4 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: corrupt payload: fuzzer findings - hash crash (225 ms) [ok]: AOF rewrite during write load: RDB preamble=no (30401 ms) [ok]: benchmark: full test suite (59 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: benchmark: multi-thread set,get (7 ms) [ok]: Generate timestamp annotations in AOF (333 ms) [ok]: benchmark: pipelined full set,get (88 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: PFMERGE results with simd (790 ms) [ok]: benchmark: keyspace length (66 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: benchmark: read last argument from stdin (5 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (226 ms) [ok]: Successfully load AOF which has timestamp annotations inside (0 ms) [73/96 done]: integration/redis-benchmark (0 seconds) Testing integration/replication-2 [ok]: Interactive CLI: should find first search result (291 ms) [ok]: Test RDB stream encoding (65 ms) [ok]: Test RDB stream encoding - sanitize dump (7 ms) [ok]: Turning off AOF kills the background writing child if any (108 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (224 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: AOF rewrite of list with listpack encoding, string data (104 ms) [ok]: Server should not start if RDB is corrupted (0 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (116 ms) [ok]: Interactive CLI: should find and use the first search result (303 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (0 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1638 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (224 ms) [ok]: AOF rewrite of list with listpack encoding, int data (103 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: Interactive CLI: should be ok if there is no result (121 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (111 ms) [ok]: Interactive CLI: upon submitting search, (reverse-i-search) prompt should go away (122 ms) [ok]: corrupt payload: fuzzer findings - empty intset (217 ms) [ok]: AOF rewrite of set with intset encoding, string data (103 ms) [ok]: Test FLUSHALL aborts bgsave (285 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Truncate AOF to specific timestamp (687 ms) [ok]: bgsave resets the change counter (102 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (226 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (191 ms) [ok]: Interactive CLI: should find second search result if user presses ctrl+r again (303 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: AOF rewrite of set with intset encoding, int data (103 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (104 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (229 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2677 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: Interactive CLI: should find second search result if user presses ctrl+s (302 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (123 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (224 ms) [ok]: Interactive CLI: should exit reverse search if user presses ctrl+g (172 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (104 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9356 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: replica buffer don't induce eviction (6452 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (117 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (226 ms) [ok]: Interactive CLI: should exit reverse search if user presses up arrow (181 ms) [ok]: Multi Part AOF writes start offset in the manifest (230 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (104 ms) [ok]: Multi Part AOF won't add the offset of incr AOF from old version (131 ms) [ok]: Interactive CLI: should exit reverse search if user presses right arrow (181 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (225 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (175 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (106 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (156 ms) [ok]: Multi Part AOF can update master_repl_offset with only startoffset info (225 ms) [ok]: Interactive CLI: should exit reverse search if user presses down arrow (182 ms) [ok]: client freed during loading (1143 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (226 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (115 ms) [ok]: Interactive CLI: should exit reverse search if user presses left arrow (183 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (131 ms) [ok]: AOF rewrite functions (103 ms) [ok]: Multi Part AOF can update master_repl_offset with endoffset info (225 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (211 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1929 ms) [ok]: BGREWRITEAOF is refused if already in progress (9 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (226 ms) [ok]: Interactive CLI: should disable and persist line if user presses tab (243 ms) [ok]: Multi Part AOF will add the end offset if we close gracefully the AOF (235 ms) [74/96 done]: unit/aofrw (48 seconds) Testing integration/replication-3 [ok]: PSYNC2 pingoff: pause replica and promote it (5000 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (122 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Test RDB load info (429 ms) [75/96 done]: integration/psync2-master-restart (7 seconds) Testing integration/replication-4 [ok]: Interactive CLI: should disable and persist search result if user presses tab (242 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (226 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: First server should have role slave after SLAVEOF (0 ms) [ok]: Interactive CLI: should disable and persist line and move the cursor if user presses tab (303 ms) [ok]: INCR AOF has accurate start offset when AOFRW (532 ms) [76/96 done]: integration/aof-multi-part (13 seconds) Testing integration/replication-buffer [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (228 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2285 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (122 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2817 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: EVAL can process writes from AOF in read-only replicas (224 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (226 ms) [ok]: Test redis-check-aof for old style resp AOF (8 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (7 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (7 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (8 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (7 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (13 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (7 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (8 ms) [ok]: client tracking don't cause eviction feedback loop (1339 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (226 ms) [ok]: Interactive CLI: Parsing quotes (426 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (220 ms) [ok]: propagation with eviction (99 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (122 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (4068 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (216 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: propagation with eviction in MULTI (97 ms) [ok]: Interactive CLI: Subscribed mode (618 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (223 ms) [ok]: lru/lfu value of the key just added (1 ms) [77/96 done]: unit/maxmemory (48 seconds) Testing integration/replication-psync [ok]: All replicas share one global replication buffer rdbchannel=yes (73 ms) [ok]: Replication buffer will become smaller when no replica uses rdbchannel=yes (5 ms) [ok]: corrupt payload: fuzzer findings - huge string (229 ms) [ok]: Test child sending info (1912 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (415 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (2 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (16 ms) [ok]: Non-interactive non-TTY CLI: Status reply (1 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (2 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (222 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0, rdbchannel: no) (6 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (1 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (9 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (9 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (122 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (225 ms) [ok]: Allow changing appendonly config while loading from AOF on startup (1491 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (121 ms) [ok]: failed bgsave prevents writes (200 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (226 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (225 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (4 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1811 ms) [ok]: HFE - save and load expired fields, expired soon after, or long after (listpack) (354 ms) [ok]: corrupt payload: fuzzer findings - empty zset (226 ms) [ok]: Allow changing appendonly config while loading from RDB on startup (706 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [78/96 done]: integration/aof (15 seconds) Testing integration/replication-rdbchannel [ok]: corrupt payload: fuzzer findings - hash with len of 0 (225 ms) [ok]: HFE - save and load expired fields, expired soon after, or long after (dict) (309 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (226 ms) [ok]: Test replication with multiple replicas (rdbchannel enabled on both) (123 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (643 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [79/96 done]: unit/hyperloglog (52 seconds) Testing integration/replication [ok]: MASTER and SLAVE consistency with expire (3749 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (25 ms) [ok]: HFE - save and load rdb all fields expired, (listpack) (308 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (225 ms) [ok]: Slave enters handshake (0 ms) [ok]: HFE - save and load rdb all fields expired, (dict) (222 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (225 ms) [ok]: Dumping an RDB - functions only: no (2009 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (123 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (120 ms) [ok]: save listpack, load dict (420 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (217 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (226 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 51364) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: save dict, load listpack (426 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (225 ms) [ok]: Slave enters wait_bgsave (1002 ms) [ok]: All replicas share one global replication buffer rdbchannel=no (80 ms) [ok]: Replication buffer will become smaller when no replica uses rdbchannel=no (5 ms) [ok]: Dumping an RDB - functions only: yes (1000 ms) [ok]: Scan mode (52 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (227 ms) [ok]: Test replication with parallel clients writing in different DBs (5243 ms) [ok]: active field expiry after load, (listpack) (316 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (225 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (217 ms) [ok]: corrupt payload: fuzzer findings - set with invalid length causes smembers to hang (122 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (1 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (5339 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: active field expiry after load, (dict) (307 ms) [ok]: corrupt payload: fuzzer findings - set with invalid length causes sscan to hang (121 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (4526 ms) [ok]: corrupt payload: zset listpack encoded with invalid length causes zscan to hang (122 ms) [ok]: corrupt payload: hash listpack encoded with invalid length causes hscan to hang (122 ms) [80/96 done]: integration/corrupt-dump (17 seconds) Testing integration/shutdown [ok]: ziplist implementation: value encoding and backlink (11050 ms) [81/96 done]: integration/replication-2 (9 seconds) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: lazy field expiry after load, (listpack) (505 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: Connecting as a replica (2160 ms) [ok]: lazy field expiry after load, (dict) (517 ms) [ok]: load un-expired items below and above rax-list boundary, (listpack) (225 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1856 ms) [ok]: load un-expired items below and above rax-list boundary, (dict) (225 ms) [ok]: Piping raw protocol (933 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (8 ms) [ok]: Replication backlog size can outgrow the backlog limit config rdbchannel=yes (1860 ms) [ok]: DUMP RESTORE with -X option (9 ms) [ok]: Send eval command by using --eval option (1 ms) [82/96 done]: integration/rdb (12 seconds) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10015 ms) [83/96 done]: integration/corrupt-dump-fuzzer (20 seconds) [ok]: PSYNC2: cluster is consistent after failover (10 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1, rdbchannel: no) (6321 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Interactive CLI: db_num showed in redis-cli after reconnected (821 ms) [84/96 done]: integration/redis-cli (12 seconds) [ok]: PSYNC2 #3899 regression: kill chained replica (6 ms) [ok]: Slave should be able to synchronize with the master (117 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3819 ms) [ok]: Test replication with multiple replicas (rdbchannel enabled on one of them) (5982 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (3007 ms) [ok]: Slave is able to evict keys created in writable slaves (6004 ms) [ok]: Test rdbchannel is not used if repl-diskless-sync config is disabled on master (190 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (7 ms) [ok]: Writable replica doesn't return expired keys (157 ms) [ok]: PFCOUNT updates cache on readonly replica (33 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (43 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: First server should have role slave after SLAVEOF (110 ms) [ok]: Detect write load to master (1006 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2593 ms) [ok]: Replication of an expired key does not delete the expired key (538 ms) [85/96 done]: integration/replication-3 (11 seconds) [86/96 done]: integration/psync2-pingoff (18 seconds) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: First server should have role slave after SLAVEOF (7 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization rdbchannel=yes (3531 ms) [ok]: Test replica state should start with wait_bgsave (229 ms) [ok]: Test replica state advances to send_bulk_and_stream when rdbchannel connects (39 ms) [ok]: Test replica rdbchannel client has SC flag on client list output (6 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica rdbchannel=yes (767 ms) [ok]: Shutting down master waits for replica timeout (2304 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: PSYNC2: generate load while killing replication links (5002 ms) [ok]: PSYNC2: cluster is consistent after load (x = 82628) (26 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (29 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (6 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [ok]: Shutting down master waits for replica then fails (1214 ms) [87/96 done]: integration/block-repl (26 seconds) [ok]: Shutting down master waits for replica then aborted (522 ms) [88/96 done]: integration/shutdown (8 seconds) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: Set instance A as slave of B (100 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (2 ms) [ok]: BRPOPLPUSH replication, list exists (1 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: BLMOVE (left, left) replication, list exists (1 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (2 ms) [ok]: BLMOVE (left, right) replication, list exists (1 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (2 ms) [ok]: BLMOVE (right, left) replication, list exists (1 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: BLMOVE (right, right) replication, list exists (2 ms) [ok]: BLPOP followed by role change, issue #2473 (103 ms) [ok]: Replication backlog size can outgrow the backlog limit config rdbchannel=no (2370 ms) [ok]: Test replica state advances to online when fullsync is completed (4173 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (0 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: FLUSHDB / FLUSHALL should replicate (195 ms) [ok]: ROLE in master reports master with a slave (1 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: PSYNC2 #3899 regression: verify consistency (19 ms) [ok]: ziplist implementation: encoding stress testing (10726 ms) [89/96 done]: unit/type/list-3 (49 seconds) [ok]: PSYNC2: Set #3 to replicate from #0 (1 ms) [90/96 done]: integration/psync2-reg (22 seconds) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization rdbchannel=no (2145 ms) [ok]: PSYNC2: cluster is consistent after failover (13 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1, rdbchannel: no) (7986 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica rdbchannel=no (950 ms) [ok]: Slave should be able to synchronize with the master (136 ms) [ok]: Detect write load to master (2020 ms) [ok]: Replication: commands with many arguments (issue #1221) (11639 ms) [ok]: spopwithcount rewrite srem command (139 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 103072) (4 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (9 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (2 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (3 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (11 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size rdbchannel=yes (4397 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (919 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (6 ms) [ok]: Data divergence is allowed on writable replicas (3 ms) [91/96 done]: integration/replication-4 (25 seconds) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending rdbchannel=yes (1161 ms) [ok]: Test master memory does not increase during replication (10575 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size rdbchannel=no (3136 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 157782) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending rdbchannel=no (1129 ms) [92/96 done]: integration/replication-buffer (29 seconds) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (1 ms) [ok]: Test replication stream buffer becomes full on replica (2429 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1, rdbchannel: no) (9397 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: Test replication stream buffer config replica-full-sync-buffer-limit (1158 ms) [ok]: Detect write load to master (1002 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) Waiting for process 3605 to exit... Waiting for process 3605 to exit... Waiting for process 3605 to exit... [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled, rdbchannel=no (19354 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 214842) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (287 ms) [93/96 done]: integration/psync2 (43 seconds) [ok]: Test master disconnects replica when output buffer limit is reached (4608 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1, rdbchannel: no) (9468 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0, rdbchannel: no) (7 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication recovers after output buffer failures (3691 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1, rdbchannel: no) (6300 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test master continues RDB delivery if not all replicas are dropped (8922 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb, rdbchannel=no (17823 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1, rdbchannel: no) (7851 ms) [ok]: Slave should be able to synchronize with the master (110 ms) [ok]: Detect write load to master (6 ms) [ok]: Test master aborts rdb delivery if all replicas are dropped (6027 ms) [ok]: Test replica recovers when rdb channel connection is killed (691 ms) [ok]: Test replica recovers when main channel connection is killed (703 ms) [ok]: Test replica recovers connection failures (3386 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1, rdbchannel: no) (9435 ms) [ok]: Test master connection drops while streaming repl buffer into the db (2349 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test main channel connection drops while loading rdb (disk based) (1767 ms) [ok]: Test main channel connection drops while loading rdb (diskless) (1357 ms) [ok]: Test replicaof command while streaming repl buffer into the db (2281 ms) [94/96 done]: integration/replication-rdbchannel (71 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled, rdbchannel=yes (18810 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1, rdbchannel: no) (9458 ms) [ok]: Slave should be able to synchronize with the master (1826 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0, rdbchannel: yes) (93 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1, rdbchannel: yes) (6336 ms) [ok]: Slave should be able to synchronize with the master (846 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb, rdbchannel=yes (16836 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1, rdbchannel: yes) (7919 ms) [ok]: Slave should be able to synchronize with the master (1828 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1, rdbchannel: yes) (9533 ms) [ok]: Slave should be able to synchronize with the master (845 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1, rdbchannel: yes) (9706 ms) [ok]: Slave should be able to synchronize with the master (810 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0, rdbchannel: no) (44 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (32256 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading rdbchannel=no (167 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails rdbchannel=no (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1, rdbchannel: no) (6324 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (116 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (426 ms) [ok]: Busy script during async loading (630 ms) [ok]: Blocked commands and configs during async-loading (122 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 6692 to exit... Waiting for process 6692 to exit... Waiting for process 6692 to exit... Waiting for process 6692 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1, rdbchannel: no) (7882 ms) [ok]: Slave should be able to synchronize with the master (897 ms) [ok]: Detect write load to master (3 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1, rdbchannel: no) (9476 ms) [ok]: Slave should be able to synchronize with the master (811 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1, rdbchannel: no) (9563 ms) [ok]: Slave should be able to synchronize with the master (1807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0, rdbchannel: yes) (68 ms) [ok]: Slave should be able to synchronize with the master (737 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless loading short read (27074 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1, rdbchannel: yes) (6315 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless no replicas drop during rdb pipe (6954 ms) [ok]: diskless slow replicas drop during rdb pipe (3517 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1, rdbchannel: yes) (7934 ms) [ok]: Slave should be able to synchronize with the master (1800 ms) [ok]: Detect write load to master (6 ms) [ok]: diskless fast replicas drop during rdb pipe (6760 ms) [ok]: diskless all replicas drop during rdb pipe (1236 ms) [ok]: diskless timeout replicas drop during rdb pipe (6420 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1, rdbchannel: yes) (9480 ms) [ok]: diskless replication child being killed is collected (1627 ms) [ok]: Slave should be able to synchronize with the master (1688 ms) [ok]: Detect write load to master (0 ms) [ok]: replication child dies when parent is killed - diskless: yes (2385 ms) [ok]: replication child dies when parent is killed - diskless: no (2275 ms) [ok]: diskless replication read pipe cleanup (767 ms) [ok]: replicaof right after disconnection (1835 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (1131 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (106 ms) [ok]: replica can handle EINTR if use diskless load (643 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (96 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (147 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (64 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (104 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (112 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1, rdbchannel: yes) (10466 ms) [ok]: Slave should be able to synchronize with the master (861 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0, rdbchannel: no) (35 ms) [ok]: Slave should be able to synchronize with the master (823 ms) [ok]: Detect write load to master (0 ms) [ok]: Replica should reply LOADING while flushing a large db (disklessload: disabled) (3741 ms) [ok]: Replica should reply LOADING while flushing a large db (disklessload: on-empty-db) (3444 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1, rdbchannel: no) (6352 ms) [ok]: Allow appendonly config change while loading rdb on slave (2299 ms) [ok]: Replica flushes db lazily when replica-lazy-flush enabled (103 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication with functions when repl-diskless-load is set to on-empty-db (102 ms) [95/96 done]: integration/replication (208 seconds) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1, rdbchannel: no) (7912 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1, rdbchannel: no) (9496 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1, rdbchannel: no) (9588 ms) [96/96 done]: integration/replication-psync (239 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [96/96 done]: bitops-large-memory (1 seconds) Testing solo test [96/96 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [96/96 done]: violations (1 seconds) Testing solo test [96/96 done]: list-large-memory (1 seconds) Testing solo test [96/96 done]: set-large-memory (0 seconds) The End Execution time of different units: 0 seconds - unit/info-command 0 seconds - unit/acl-v2 1 seconds - unit/bitfield 1 seconds - unit/keyspace 2 seconds - unit/bitops 2 seconds - unit/acl 2 seconds - unit/info 1 seconds - unit/limits 3 seconds - unit/functions 4 seconds - unit/auth 2 seconds - unit/networking 3 seconds - unit/memefficiency 0 seconds - unit/oom-score-adj 1 seconds - unit/pause 0 seconds - unit/printver 5 seconds - unit/multi 7 seconds - unit/lazyfree 8 seconds - unit/latency-monitor 9 seconds - unit/introspection-2 9 seconds - unit/introspection 0 seconds - unit/quit 1 seconds - unit/pubsub 1 seconds - unit/pubsubshard 1 seconds - unit/replybufsize 4 seconds - unit/protocol 1 seconds - unit/shutdown 1 seconds - unit/tls 2 seconds - unit/slowlog 0 seconds - unit/violations 2 seconds - unit/tracking 14 seconds - unit/client-eviction 6 seconds - unit/querybuf 0 seconds - unit/type/incr 16 seconds - unit/expire 3 seconds - unit/type/hash 13 seconds - unit/other 14 seconds - unit/obuf-limits 8 seconds - unit/sort 10 seconds - unit/type/hash-field-expire 5 seconds - unit/type/stream-cgroups 24 seconds - unit/dump 16 seconds - unit/scan 26 seconds - unit/geo 0 seconds - unit/cluster/cluster-response-tls 12 seconds - unit/type/list-2 3 seconds - unit/cluster/announced-endpoints 27 seconds - unit/info-keysizes 7 seconds - unit/type/string 13 seconds - unit/type/set 15 seconds - unit/type/list 6 seconds - unit/cluster/human-announced-nodename 2 seconds - unit/cluster/multi-slot-operations 4 seconds - unit/cluster/misc 8 seconds - unit/cluster/hostnames 2 seconds - unit/cluster/scripting 27 seconds - unit/scripting 1 seconds - integration/aof-race 9 seconds - unit/cluster/internal-secret 0 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 19 seconds - unit/type/stream 0 seconds - integration/convert-zipmap-hash-on-load 4 seconds - unit/cluster/sharded-pubsub 3 seconds - unit/cluster/slot-ownership 14 seconds - unit/cluster/failure-marking 1 seconds - integration/logging 3 seconds - integration/dismiss-mem 20 seconds - unit/type/zset 5 seconds - integration/failover 32 seconds - unit/wait 15 seconds - unit/cluster/links 20 seconds - unit/cluster/cli 0 seconds - integration/redis-benchmark 48 seconds - unit/aofrw 7 seconds - integration/psync2-master-restart 13 seconds - integration/aof-multi-part 48 seconds - unit/maxmemory 15 seconds - integration/aof 52 seconds - unit/hyperloglog 17 seconds - integration/corrupt-dump 9 seconds - integration/replication-2 12 seconds - integration/rdb 20 seconds - integration/corrupt-dump-fuzzer 12 seconds - integration/redis-cli 11 seconds - integration/replication-3 18 seconds - integration/psync2-pingoff 26 seconds - integration/block-repl 8 seconds - integration/shutdown 49 seconds - unit/type/list-3 22 seconds - integration/psync2-reg 25 seconds - integration/replication-4 29 seconds - integration/replication-buffer 43 seconds - integration/psync2 71 seconds - integration/replication-rdbchannel 208 seconds - integration/replication 239 seconds - integration/replication-psync 1 seconds - bitops-large-memory 2 seconds - defrag 1 seconds - violations 1 seconds - list-large-memory 0 seconds - set-large-memory \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' >>> redis: Entering fakeroot... for dir in src; do make -C $dir install; done make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' INSTALL redis-sentinel INSTALL redis-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-8.0.0/src' >>> redis-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/init.d' >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-8.0.0-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 1.7 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-8.0.0-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 so:libstdc++.so.6 >>> redis*: Package size: 2.8 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-8.0.0-r0.apk >>> redis: Build complete at Wed, 14 May 2025 10:39:43 +0000 elapsed time 0h 5m 24s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250514.103420) (2/8) Purging linux-headers (6.14.2-r0) (3/8) Purging openssl-dev (3.5.0-r0) (4/8) Purging tcl (8.6.16-r0) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.24.1-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r17.trigger OK: 275 MiB in 104 packages >>> redis: Updating the community/armv7 repository index... >>> redis: Signing the index...