>>> xprop: Building community/xprop 1.2.8-r0 (using abuild 3.14.1-r3) started Wed, 04 Dec 2024 10:30:24 +0000 >>> xprop: Validating /home/buildozer/aports/community/xprop/APKBUILD... >>> xprop: Analyzing dependencies... >>> xprop: Installing for build: build-base libx11-dev util-macros (1/27) Installing libxau (1.0.11-r4) (2/27) Installing xorgproto (2024.1-r0) (3/27) Installing libxau-dev (1.0.11-r4) (4/27) Installing libbz2 (1.0.8-r6) (5/27) Installing libffi (3.4.6-r0) (6/27) Installing gdbm (1.24-r0) (7/27) Installing xz-libs (5.6.3-r0) (8/27) Installing mpdecimal (4.0.0-r0) (9/27) Installing libpanelw (6.5_p20241006-r3) (10/27) Installing sqlite-libs (3.47.1-r0) (11/27) Installing python3 (3.12.7-r1) (12/27) Installing python3-pycache-pyc0 (3.12.7-r1) (13/27) Installing pyc (3.12.7-r1) (14/27) Installing xcb-proto-pyc (1.17.0-r0) (15/27) Installing python3-pyc (3.12.7-r1) (16/27) Installing xcb-proto (1.17.0-r0) (17/27) Installing libmd (1.1.0-r0) (18/27) Installing libbsd (0.12.2-r0) (19/27) Installing libxdmcp (1.1.5-r1) (20/27) Installing libxcb (1.16.1-r0) (21/27) Installing libxdmcp-dev (1.1.5-r1) (22/27) Installing libxcb-dev (1.16.1-r0) (23/27) Installing xtrans (1.5.2-r0) (24/27) Installing libx11 (1.8.10-r0) (25/27) Installing libx11-dev (1.8.10-r0) (26/27) Installing util-macros (1.20.1-r0) (27/27) Installing .makedepends-xprop (20241204.103025) Executing busybox-1.37.0-r8.trigger OK: 405 MiB in 132 packages >>> xprop: Cleaning up srcdir >>> xprop: Cleaning up pkgdir >>> xprop: Cleaning up tmpdir >>> xprop: Fetching https://distfiles.alpinelinux.org/distfiles/edge//xprop-1.2.8.tar.xz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (22) The requested URL returned error: 404 >>> xprop: Fetching https://www.x.org/archive/individual/app/xprop-1.2.8.tar.xz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 143k 100 143k 0 0 278k 0 --:--:-- --:--:-- --:--:-- 278k >>> xprop: Fetching https://distfiles.alpinelinux.org/distfiles/edge//xprop-1.2.8.tar.xz >>> xprop: Checking sha512sums... xprop-1.2.8.tar.xz: OK >>> xprop: Unpacking /var/cache/distfiles/edge/xprop-1.2.8.tar.xz... checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 2 checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes checking whether make supports the include directive... yes (GNU style) checking for s390x-alpine-linux-musl-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for gcc options needed to detect all undeclared functions... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking whether __clang__ is declared... no checking whether __INTEL_COMPILER is declared... no checking whether __SUNPRO_C is declared... no checking for s390x-alpine-linux-musl-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking build system type... s390x-alpine-linux-musl checking host system type... s390x-alpine-linux-musl checking for a sed that does not truncate output... /bin/sed checking if gcc supports -Werror=unknown-warning-option... no checking if gcc supports -Werror=unused-command-line-argument... no checking if gcc supports -Wall... yes checking if gcc supports -Wpointer-arith... yes checking if gcc supports -Wmissing-declarations... yes checking if gcc supports -Wformat=2... yes checking if gcc supports -Wstrict-prototypes... yes checking if gcc supports -Wmissing-prototypes... yes checking if gcc supports -Wnested-externs... yes checking if gcc supports -Wbad-function-cast... yes checking if gcc supports -Wold-style-definition... yes checking if gcc supports -Wunused... yes checking if gcc supports -Wuninitialized... yes checking if gcc supports -Wshadow... yes checking if gcc supports -Wmissing-noreturn... yes checking if gcc supports -Wmissing-format-attribute... yes checking if gcc supports -Wredundant-decls... yes checking if gcc supports -Wlogical-op... yes checking if gcc supports -Werror=implicit... yes checking if gcc supports -Werror=nonnull... yes checking if gcc supports -Werror=init-self... yes checking if gcc supports -Werror=main... yes checking if gcc supports -Werror=missing-braces... yes checking if gcc supports -Werror=sequence-point... yes checking if gcc supports -Werror=return-type... yes checking if gcc supports -Werror=trigraphs... yes checking if gcc supports -Werror=array-bounds... yes checking if gcc supports -Werror=write-strings... yes checking if gcc supports -Werror=address... yes checking if gcc supports -Werror=int-to-pointer-cast... yes checking if gcc supports -Werror=pointer-to-int-cast... yes checking if gcc supports -pedantic... yes checking if gcc supports -Werror... yes checking if gcc supports -Werror=attributes... yes checking for wchar.h... yes checking for wctype.h... yes checking for langinfo.h... yes checking for XPROP... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating man/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' Making all in man make[2]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' GEN xprop.1 make[2]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[2]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' CC dsimple.o CC clientwin.o CC xprop.o CCLD xprop make[2]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' make[1]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' Making check in man make[1]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[1]: Nothing to be done for 'check'. make[1]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[1]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' make[1]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' >>> xprop: Entering fakeroot... Making install in man make[1]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[2]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildozer/aports/community/xprop/pkg/xprop/usr/share/man/man1' /usr/bin/install -c -m 644 xprop.1 '/home/buildozer/aports/community/xprop/pkg/xprop/usr/share/man/man1' make[2]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[1]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8/man' make[1]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' make[2]: Entering directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' make[2]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildozer/aports/community/xprop/pkg/xprop/usr/bin' libfakeroot internal error: payload not recognized! /usr/bin/install -c xprop '/home/buildozer/aports/community/xprop/pkg/xprop/usr/bin' make[2]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' make[1]: Leaving directory '/home/buildozer/aports/community/xprop/src/xprop-1.2.8' >>> xprop-doc*: Running split function doc... 'usr/share/man' -> '/home/buildozer/aports/community/xprop/pkg/xprop-doc/usr/share/man' >>> xprop-doc*: Preparing subpackage xprop-doc... >>> xprop-doc*: Running postcheck for xprop-doc >>> xprop*: Running postcheck for xprop >>> xprop*: Preparing package xprop... >>> xprop*: Stripping binaries >>> xprop-doc*: Scanning shared objects >>> xprop*: Scanning shared objects >>> xprop-doc*: Tracing dependencies... >>> xprop-doc*: Package size: 5.6 KB >>> xprop-doc*: Compressing data... >>> xprop-doc*: Create checksum... >>> xprop-doc*: Create xprop-doc-1.2.8-r0.apk >>> xprop*: Tracing dependencies... so:libX11.so.6 so:libc.musl-s390x.so.1 >>> xprop*: Package size: 44.0 KB >>> xprop*: Compressing data... >>> xprop*: Create checksum... >>> xprop*: Create xprop-1.2.8-r0.apk >>> xprop: Build complete at Wed, 04 Dec 2024 10:30:28 +0000 elapsed time 0h 0m 4s >>> xprop: Cleaning up srcdir >>> xprop: Cleaning up pkgdir >>> xprop: Uninstalling dependencies... (1/27) Purging .makedepends-xprop (20241204.103025) (2/27) Purging libx11-dev (1.8.10-r0) (3/27) Purging xtrans (1.5.2-r0) (4/27) Purging libx11 (1.8.10-r0) (5/27) Purging util-macros (1.20.1-r0) (6/27) Purging libxcb-dev (1.16.1-r0) (7/27) Purging xcb-proto-pyc (1.17.0-r0) (8/27) Purging xcb-proto (1.17.0-r0) (9/27) Purging python3-pyc (3.12.7-r1) (10/27) Purging python3-pycache-pyc0 (3.12.7-r1) (11/27) Purging pyc (3.12.7-r1) (12/27) Purging python3 (3.12.7-r1) (13/27) Purging libxcb (1.16.1-r0) (14/27) Purging libxdmcp-dev (1.1.5-r1) (15/27) Purging libxdmcp (1.1.5-r1) (16/27) Purging mpdecimal (4.0.0-r0) (17/27) Purging sqlite-libs (3.47.1-r0) (18/27) Purging xz-libs (5.6.3-r0) (19/27) Purging gdbm (1.24-r0) (20/27) Purging libbsd (0.12.2-r0) (21/27) Purging libbz2 (1.0.8-r6) (22/27) Purging libffi (3.4.6-r0) (23/27) Purging libmd (1.1.0-r0) (24/27) Purging libpanelw (6.5_p20241006-r3) (25/27) Purging libxau-dev (1.0.11-r4) (26/27) Purging libxau (1.0.11-r4) (27/27) Purging xorgproto (2024.1-r0) Executing busybox-1.37.0-r8.trigger OK: 358 MiB in 105 packages >>> xprop: Updating the community/s390x repository index... >>> xprop: Signing the index...