>>> numactl: Building main/numactl 2.0.16-r2 (using abuild 3.10.0-r0) started Fri, 27 Jan 2023 18:45:14 +0000
>>> numactl: Checking sanity of /home/buildozer/aports/main/numactl/APKBUILD...
>>> numactl: Analyzing dependencies...
>>> numactl: Installing for build: build-base autoconf automake libtool linux-headers
(1/12) Installing m4 (1.4.19-r2)
(2/12) Installing libbz2 (1.0.8-r4)
(3/12) Installing perl (5.36.0-r0)
(4/12) Installing autoconf (2.71-r2)
(5/12) Installing automake (1.16.5-r2)
(6/12) Installing libltdl (2.4.7-r0)
(7/12) Installing libtool (2.4.7-r0)
(8/12) Installing linux-headers (6.1.7-r0)
(9/12) Installing .makedepends-numactl (20230127.184515)
(10/12) Installing perl-error (0.17029-r1)
(11/12) Installing perl-git (2.39.1-r1)
(12/12) Installing git-perl (2.39.1-r1)
Executing busybox-1.36.0-r3.trigger
OK: 421 MiB in 110 packages
>>> numactl: Cleaning up srcdir
>>> numactl: Cleaning up pkgdir
>>> numactl: Fetching https://distfiles.alpinelinux.org/distfiles/edge//numactl-2.0.16.tar.gz
>>> numactl: Fetching https://distfiles.alpinelinux.org/distfiles/edge//numactl-2.0.16.tar.gz
>>> numactl: Checking sha512sums...
numactl-2.0.16.tar.gz: OK
>>> numactl: Unpacking /var/cache/distfiles/edge/numactl-2.0.16.tar.gz...
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: linking file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: linking file 'm4/libtool.m4'
libtoolize: linking file 'm4/ltoptions.m4'
libtoolize: linking file 'm4/ltsugar.m4'
libtoolize: linking file 'm4/ltversion.m4'
libtoolize: linking file 'm4/lt~obsolete.m4'
configure.ac:20: warning: The macro `AC_TRY_COMPILE' is obsolete.
configure.ac:20: You should run autoupdate.
./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:594: AS_CASE is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
m4/ax_tls.m4:49: AX_TLS is expanded from...
configure.ac:20: the top level
configure.ac:25: warning: AC_ARG_PROGRAM was called before AC_CANONICAL_TARGET
./lib/autoconf/general.m4:2057: AC_CANONICAL_TARGET is expanded from...
configure.ac:25: the top level
configure.ac:13: installing 'build-aux/compile'
configure.ac:13: installing 'build-aux/config.guess'
configure.ac:13: installing 'build-aux/config.sub'
configure.ac:9: installing 'build-aux/install-sh'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
parallel-tests: installing 'build-aux/test-driver'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... ./build-aux/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... s390x-alpine-linux-musl
checking host system type... s390x-alpine-linux-musl
checking how to print strings... printf
checking whether make supports the include directive... yes (GNU style)
checking for s390x-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/s390x-alpine-linux-musl/bin/ld
checking if the linker (/usr/s390x-alpine-linux-musl/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking how to convert s390x-alpine-linux-musl file names to s390x-alpine-linux-musl format... func_convert_file_noop
checking how to convert s390x-alpine-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/s390x-alpine-linux-musl/bin/ld option to reload object files... -r
checking for s390x-alpine-linux-musl-file... no
checking for file... file
checking for s390x-alpine-linux-musl-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for s390x-alpine-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for s390x-alpine-linux-musl-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for s390x-alpine-linux-musl-strip... no
checking for strip... strip
checking for s390x-alpine-linux-musl-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for s390x-alpine-linux-musl-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/s390x-alpine-linux-musl/bin/ld -m elf64_s390) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for s390x-alpine-linux-musl-gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking for thread local storage (TLS) class... __thread
checking whether C compiler accepts -ftree-vectorize... yes
checking target system type... s390x-alpine-linux-musl
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make  all-am
make[1]: Entering directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
  CC       numactl.o
  CC       util.o
  CC       shm.o
  CC       libnuma.lo
  CC       syscall.lo
  CC       distance.lo
  CC       affinity.lo
In file included from shm.c:27:
/usr/include/sys/fcntl.h:1:2: warning: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
    1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
      |  ^~~~~~~
  CC       sysfs.lo
  CC       rtnetlink.lo
  CC       numastat-numastat.o
In file included from sysfs.c:4:
/usr/include/sys/fcntl.h:1:2: warning: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
    1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
      |  ^~~~~~~
  CC       numademo-numademo.o
  CC       numademo-stream_lib.o
  CC       numademo-mt.o
  CC       numademo-clearcache.o
  CC       numademo-util.o
  CC       migratepages.o
clearcache.c: In function 'clearcache':
clearcache.c:74:2: warning: #warning "Consider adding a clearcache implementation for your architecture" [-Wcpp]
   74 | #warning "Consider adding a clearcache implementation for your architecture"
      |  ^~~~~~~
  CC       migspeed.o
  CC       memhog.o
  GEN      numa.pc
In file included from memhog.c:21:
/usr/include/sys/fcntl.h:1:2: warning: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
    1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
      |  ^~~~~~~
  CCLD     numastat
  CCLD     libnuma.la
  CCLD     numactl
  CCLD     numademo
  CCLD     migspeed
  CCLD     migratepages
  CCLD     memhog
make[1]: Leaving directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
make  test/distance test/ftok test/mbind_mig_pages test/migrate_pages test/move_pages test/mynode test/node-parse test/nodemap test/pagesize test/prefered test/randmap test/realloc_test test/tbitmap test/tshared
make[1]: Entering directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
  CC       test/distance.o
  CC       test/ftok.o
  CC       test/mbind_mig_pages.o
  CC       test/migrate_pages.o
  CC       test/move_pages.o
  CC       test/mynode.o
  CC       test/node-parse.o
test/move_pages.c: In function 'get_node_list':
test/move_pages.c:35:39: warning: passing argument 2 of 'numa_node_size' from incompatible pointer type [-Wincompatible-pointer-types]
   35 |                 if (numa_node_size(a, &free_node_sizes) > 0)
      |                                       ^~~~~~~~~~~~~~~~
      |                                       |
      |                                       long long int *
In file included from test/move_pages.c:9:
./numa.h:146:37: note: expected 'long int *' but argument is of type 'long long int *'
  146 | long numa_node_size(int node, long *freep);
      |                               ~~~~~~^~~~~
  CC       test/nodemap.o
  CC       test/pagesize.o
  CC       test/prefered.o
  CC       test/randmap.o
  CC       test/realloc_test.o
  CC       test/tbitmap.o
  CC       test/tshared.o
  CCLD     test/distance
  CCLD     test/ftok
  CCLD     test/mbind_mig_pages
  CCLD     test/migrate_pages
  CCLD     test/move_pages
  CCLD     test/mynode
  CCLD     test/node-parse
  CCLD     test/nodemap
  CCLD     test/pagesize
  CCLD     test/prefered
  CCLD     test/randmap
  CCLD     test/realloc_test
  CCLD     test/tbitmap
  CCLD     test/tshared
make[1]: Leaving directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
make  check-TESTS
make[1]: Entering directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
make[2]: Entering directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
PASS: test/distance
PASS: test/nodemap
PASS: test/tbitmap
============================================================================
Testsuite summary for numactl 2.0.16
============================================================================
# TOTAL: 3
# PASS:  3
# SKIP:  0
# XFAIL: 0
# FAIL:  0
# XPASS: 0
# ERROR: 0
============================================================================
make[2]: Leaving directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
make[1]: Leaving directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
>>> numactl: Entering fakeroot...
make[1]: Entering directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/lib'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/include'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man2'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man3'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man8'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/pkgconfig'
 /bin/sh ./libtool   --mode=install /usr/bin/install -c   libnuma.la '/home/buildozer/aports/main/numactl/pkg/numactl/usr/lib'
 /usr/bin/install -c -m 644 numa.h numacompat1.h numaif.h '/home/buildozer/aports/main/numactl/pkg/numactl/usr/include'
 /usr/bin/install -c -m 644 numa.pc '/home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 move_pages.2 '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man2'
 /usr/bin/install -c -m 644 numactl.8 numastat.8 migratepages.8 migspeed.8 memhog.8 '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man8'
 /usr/bin/install -c -m 644 numa.3 '/home/buildozer/aports/main/numactl/pkg/numactl/usr/share/man/man3'
libtool: install: /usr/bin/install -c .libs/libnuma.so.1.0.0 /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/libnuma.so.1.0.0
libtool: install: (cd /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so.1 || { rm -f libnuma.so.1 && ln -s libnuma.so.1.0.0 libnuma.so.1; }; })
libtool: install: (cd /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so || { rm -f libnuma.so && ln -s libnuma.so.1.0.0 libnuma.so; }; })
libtool: install: /usr/bin/install -c .libs/libnuma.lai /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/libnuma.la
libtool: install: /usr/bin/install -c .libs/libnuma.a /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/libnuma.a
libtool: install: chmod 644 /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/libnuma.a
libtool: install: ranlib /home/buildozer/aports/main/numactl/pkg/numactl/usr/lib/libnuma.a
libtool: warning: remember to run 'libtool --finish /usr/lib'
 ./build-aux/install-sh -c -d '/home/buildozer/aports/main/numactl/pkg/numactl/usr/bin'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c numactl numastat numademo migratepages migspeed memhog '/home/buildozer/aports/main/numactl/pkg/numactl/usr/bin'
libtool: warning: 'libnuma.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/numactl /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/numactl
libtool: install: /usr/bin/install -c numastat /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/numastat
libtool: warning: 'libnuma.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/numademo /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/numademo
libtool: warning: 'libnuma.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/migratepages /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/migratepages
libtool: warning: 'libnuma.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/migspeed /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/migspeed
libtool: warning: 'libnuma.la' has not been installed in '/usr/lib'
libtool: install: /usr/bin/install -c .libs/memhog /home/buildozer/aports/main/numactl/pkg/numactl/usr/bin/memhog
make[1]: Leaving directory '/home/buildozer/aports/main/numactl/src/numactl-2.0.16'
>>> numactl-dev*: Running split function dev...
>>> numactl-dev*: Preparing subpackage numactl-dev...
>>> numactl-dev*: Stripping binaries
>>> numactl-dev*: Running postcheck for numactl-dev
>>> numactl-doc*: Running split function doc...
>>> numactl-doc*: Preparing subpackage numactl-doc...
>>> numactl-doc*: Running postcheck for numactl-doc
>>> numactl-tools*: Running split function tools...
'/home/buildozer/aports/main/numactl/pkg/numactl/usr/bin' -> '/home/buildozer/aports/main/numactl/pkg/numactl-tools/usr/bin'
>>> numactl-tools*: Preparing subpackage numactl-tools...
>>> numactl-tools*: Stripping binaries
>>> numactl-tools*: Running postcheck for numactl-tools
>>> numactl*: Running postcheck for numactl
>>> numactl*: Preparing package numactl...
>>> numactl*: Stripping binaries
>>> numactl-dev*: Scanning shared objects
>>> numactl-doc*: Scanning shared objects
>>> numactl-tools*: Scanning shared objects
>>> numactl*: Scanning shared objects
>>> numactl-dev*: Tracing dependencies...
	numactl=2.0.16-r2
	pkgconfig
>>> numactl-dev*: Package size: 124.0 KB
>>> numactl-dev*: Compressing data...
>>> numactl-dev*: Create checksum...
>>> numactl-dev*: Create numactl-dev-2.0.16-r2.apk
>>> numactl-doc*: Tracing dependencies...
>>> numactl-doc*: Package size: 56.0 KB
>>> numactl-doc*: Compressing data...
>>> numactl-doc*: Create checksum...
>>> numactl-doc*: Create numactl-doc-2.0.16-r2.apk
>>> numactl-tools*: Tracing dependencies...
	so:libc.musl-s390x.so.1
	so:libnuma.so.1
>>> numactl-tools*: Package size: 152.0 KB
>>> numactl-tools*: Compressing data...
>>> numactl-tools*: Create checksum...
>>> numactl-tools*: Create numactl-tools-2.0.16-r2.apk
>>> numactl*: Tracing dependencies...
	so:libc.musl-s390x.so.1
>>> numactl*: Package size: 64.0 KB
>>> numactl*: Compressing data...
>>> numactl*: Create checksum...
>>> numactl*: Create numactl-2.0.16-r2.apk
>>> numactl: Build complete at Fri, 27 Jan 2023 18:45:24 +0000 elapsed time 0h 0m 10s
>>> numactl: Cleaning up srcdir
>>> numactl: Cleaning up pkgdir
>>> numactl: Uninstalling dependencies...
(1/12) Purging .makedepends-numactl (20230127.184515)
(2/12) Purging autoconf (2.71-r2)
(3/12) Purging m4 (1.4.19-r2)
(4/12) Purging automake (1.16.5-r2)
(5/12) Purging libtool (2.4.7-r0)
(6/12) Purging libltdl (2.4.7-r0)
(7/12) Purging linux-headers (6.1.7-r0)
(8/12) Purging git-perl (2.39.1-r1)
(9/12) Purging perl-git (2.39.1-r1)
(10/12) Purging perl-error (0.17029-r1)
(11/12) Purging perl (5.36.0-r0)
(12/12) Purging libbz2 (1.0.8-r4)
Executing busybox-1.36.0-r3.trigger
OK: 369 MiB in 98 packages
>>> numactl: Updating the main/s390x repository index...
>>> numactl: Signing the index...