>>> valkey: Building main/valkey 9.0.4-r0 (using abuild 3.17.0_rc2-r0) started Sun, 10 May 2026 19:14:30 +0000 >>> valkey: Validating /home/buildozer/aports/main/valkey/APKBUILD... >>> WARNING: valkey: valkey.post-upgrade is not in $source/$install/$triggers >>> valkey: Analyzing dependencies... >>> valkey: Installing for build: build-base linux-headers openssl-dev tcl procps ( 1/10) Installing linux-headers (7.0.0-r1) ( 2/10) Installing openssl-dev (3.5.6-r0) ( 3/10) Installing tzdata (2026b-r0) ( 4/10) Installing tcl (8.6.17-r1) ( 5/10) Installing libintl (1.0-r0) ( 6/10) Installing skalibs-libs (2.15.0.0-r0) ( 7/10) Installing utmps-libs (0.1.3.3-r0) ( 8/10) Installing libproc2 (4.0.6-r0) ( 9/10) Installing procps-ng (4.0.6-r0) (10/10) Installing .makedepends-valkey (20260510.191431) Executing busybox-1.37.0-r31.trigger OK: 401.0 MiB in 115 packages >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Cleaning up tmpdir >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/edge//valkey-9.0.4.tar.gz /var/cache/distfiles/edge/valkey-9.0.4.tar.gz: OK /home/buildozer/aports/main/valkey/valkey-loadmod.patch: OK /home/buildozer/aports/main/valkey/valkey.conf.patch: OK /home/buildozer/aports/main/valkey/sentinel.conf.patch: OK /home/buildozer/aports/main/valkey/valkey.initd: OK /home/buildozer/aports/main/valkey/valkey.confd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.initd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.confd: OK >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/edge//valkey-9.0.4.tar.gz /var/cache/distfiles/edge/valkey-9.0.4.tar.gz: OK /home/buildozer/aports/main/valkey/valkey-loadmod.patch: OK /home/buildozer/aports/main/valkey/valkey.conf.patch: OK /home/buildozer/aports/main/valkey/sentinel.conf.patch: OK /home/buildozer/aports/main/valkey/valkey.initd: OK /home/buildozer/aports/main/valkey/valkey.confd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.initd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.confd: OK >>> valkey: Unpacking /var/cache/distfiles/edge/valkey-9.0.4.tar.gz... >>> valkey: valkey-loadmod.patch patching file src/config.c patching file src/module.c Hunk #5 succeeded at 12367 (offset 11 lines). Hunk #6 succeeded at 12548 (offset 11 lines). Hunk #7 succeeded at 12623 (offset 11 lines). Hunk #8 succeeded at 13559 (offset 23 lines). Hunk #9 succeeded at 13574 (offset 23 lines). patching file src/module.h >>> valkey: valkey.conf.patch patching file valkey.conf Hunk #8 succeeded at 2622 (offset 3 lines). >>> valkey: sentinel.conf.patch patching file sentinel.conf Hunk #4 succeeded at 259 (offset 3 lines). Hunk #5 succeeded at 284 (offset 3 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MM acl.c adlist.c ae.c allocator_defrag.c anet.c aof.c bio.c bitops.c blocked.c call_reply.c childinfo.c cli_commands.c cli_common.c cluster.c cluster_legacy.c cluster_migrateslots.c cluster_slot_stats.c commandlog.c commands.c config.c connection.c crc16.c crc64.c crccombine.c crcspeed.c db.c debug.c defrag.c dict.c endianconv.c entry.c eval.c evict.c expire.c functions.c geo.c geohash.c geohash_helper.c hashtable.c hyperloglog.c intset.c io_threads.c kvstore.c latency.c lazyfree.c listpack.c localtime.c logreqres.c lolwut.c lolwut5.c lolwut6.c lolwut9.c lua/debug_lua.c lua/engine_lua.c lua/function_lua.c lua/script_lua.c lzf_c.c lzf_d.c memory_prefetch.c memtest.c module.c monotonic.c mt19937-64.c multi.c networking.c notify.c object.c pqsort.c pubsub.c quicklist.c rand.c rax.c rdb.c rdma.c release.c replication.c resp_parser.c rio.c script.c scripting_engine.c sds.c sentinel.c server.c serverassert.c setcpuaffinity.c setproctitle.c sha1.c sha256.c siphash.c socket.c sort.c sparkline.c strl.c syncio.c syscheck.c t_hash.c t_list.c t_set.c t_stream.c t_string.c t_zset.c threads_mngr.c timeout.c tls.c trace/trace.c trace/trace_aof.c trace/trace_cluster.c trace/trace_commands.c trace/trace_db.c trace/trace_rdb.c trace/trace_server.c tracking.c unix.c util.c valkey-benchmark.c valkey-check-aof.c valkey-check-rdb.c valkey-cli.c vector.c vset.c ziplist.c zipmap.c zmalloc.c > Makefile.dep 2> /dev/null || true rm -rf valkey-server valkey-sentinel valkey-cli valkey-benchmark valkey-check-rdb valkey-check-aof valkey-unit-tests libvalkey.a unit/*.o unit/*.d lua/*.o lua/*.d trace/*.o trace/*.d *.o *.gcda *.gcno *.gcov valkey.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d vector.d quicklist.d ae.d anet.d dict.d hashtable.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d memory_prefetch.d io_threads.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d cluster_slot_stats.d crc16.d cluster_migrateslots.d endianconv.d commandlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crccombine.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d valkey-check-rdb.d valkey-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d allocator_defrag.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d lolwut9.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script.d functions.d commands.d strl.d connection.d unix.d logreqres.d rdma.d scripting_engine.d entry.d vset.d lua/script_lua.d lua/function_lua.d lua/engine_lua.d lua/debug_lua.d trace/trace.d trace/trace_commands.d trace/trace_db.d trace/trace_cluster.d trace/trace_server.d trace/trace_rdb.d trace/trace_aof.d anet.d adlist.d dict.d valkey-cli.d zmalloc.d release.d ae.d serverassert.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d sds.d util.d sha256.d ae.d anet.d valkey-benchmark.d adlist.d dict.d zmalloc.d serverassert.d release.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d sds.d util.d sha256.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps' (cd libvalkey && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float_c_interface && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so block_keyspace_notification.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so moduleparameter.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so cluster.so helloscripting.so unsupported_features.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo block_keyspace_notification.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo moduleparameter.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo cluster.xo helloscripting.xo unsupported_features.xo make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/tests/modules' (rm -f .make-*) echo STD=-pedantic -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef >> .make-settings echo OPT= >> .make-settings echo PROG_SUFFIX= >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=module >> .make-settings echo BUILD_RDMA= >> .make-settings echo USE_SYSTEMD= >> .make-settings echo USE_FAST_FLOAT=no >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo SERVER_CFLAGS= >> .make-settings echo SERVER_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -rdynamic >> .make-settings (cd ../deps && make libvalkey linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps' (cd libvalkey && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float_c_interface && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE libvalkey cd libvalkey && make static SDS_INCLUDE_DIR=../../src/ DICT_INCLUDE_DIR=../../src/ USE_TLS=1 make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/libvalkey' MAKE linenoise MAKE lua cd linenoise && make cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/linenoise' cc -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/lua/src' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/hdr_histogram' cc -std=c99 -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c MAKE fpconv cd fpconv && make cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/fpconv' cc -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c mkdir -p obj mkdir -p lib cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/tls.c -o obj/tls.o ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/fpconv' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/adlist.c -o obj/adlist.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/linenoise' cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/alloc.c -o obj/alloc.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/async.c -o obj/async.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/cluster.c -o obj/cluster.o ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/hdr_histogram' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/command.c -o obj/command.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/conn.c -o obj/conn.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/crc16.c -o obj/crc16.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/net.c -o obj/net.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/read.c -o obj/read.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/sockcompat.c -o obj/sockcompat.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/valkey.c -o obj/valkey.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/vkutil.c -o obj/vkutil.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c ar rcs lib/libvalkey_tls.a obj/tls.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c ar rcs lib/libvalkey.a obj/adlist.o obj/alloc.o obj/async.o obj/cluster.o obj/command.o obj/conn.o obj/crc16.o obj/net.o obj/read.o obj/sockcompat.o obj/valkey.o obj/vkutil.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/libvalkey' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a cc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm cc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/deps' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o threads_mngr.o -c threads_mngr.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o adlist.o -c adlist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o vector.o -c vector.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o quicklist.o -c quicklist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o ae.o -c ae.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o anet.o -c anet.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o dict.o -c dict.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o hashtable.o -c hashtable.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o kvstore.o -c kvstore.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o server.o -c server.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sds.o -c sds.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o zmalloc.o -c zmalloc.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lzf_c.o -c lzf_c.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lzf_d.o -c lzf_d.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o pqsort.o -c pqsort.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o zipmap.o -c zipmap.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sha1.o -c sha1.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o ziplist.o -c ziplist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o release.o -c release.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o memory_prefetch.o -c memory_prefetch.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o io_threads.o -c io_threads.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o networking.o -c networking.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o util.o -c util.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o object.o -c object.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o db.o -c db.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o replication.o -c replication.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rdb.o -c rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_string.o -c t_string.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_list.o -c t_list.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_set.o -c t_set.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_zset.o -c t_zset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_hash.o -c t_hash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o config.o -c config.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o aof.o -c aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o pubsub.o -c pubsub.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o multi.o -c multi.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o debug.o -c debug.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sort.o -c sort.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o intset.o -c intset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o syncio.o -c syncio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster.o -c cluster.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_legacy.o -c cluster_legacy.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_slot_stats.o -c cluster_slot_stats.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crc16.o -c crc16.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_migrateslots.o -c cluster_migrateslots.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o endianconv.o -c endianconv.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o commandlog.o -c commandlog.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o eval.o -c eval.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o bio.o -c bio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rio.o -c rio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rand.o -c rand.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o memtest.o -c memtest.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o syscheck.o -c syscheck.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crcspeed.o -c crcspeed.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crccombine.o -c crccombine.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crc64.o -c crc64.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o bitops.o -c bitops.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sentinel.o -c sentinel.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o notify.o -c notify.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o setproctitle.o -c setproctitle.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o blocked.o -c blocked.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o hyperloglog.o -c hyperloglog.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o latency.o -c latency.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sparkline.o -c sparkline.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-check-rdb.o -c valkey-check-rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-check-aof.o -c valkey-check-aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geo.o -c geo.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lazyfree.o -c lazyfree.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o module.o -c module.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o evict.o -c evict.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o expire.o -c expire.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geohash.o -c geohash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geohash_helper.o -c geohash_helper.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o childinfo.o -c childinfo.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o allocator_defrag.o -c allocator_defrag.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o defrag.o -c defrag.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o siphash.o -c siphash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rax.o -c rax.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_stream.o -c t_stream.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o listpack.o -c listpack.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o localtime.o -c localtime.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut.o -c lolwut.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut5.o -c lolwut5.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut6.o -c lolwut6.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut9.o -c lolwut9.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o acl.o -c acl.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o tracking.o -c tracking.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o socket.o -c socket.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o tls.o -c tls.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sha256.o -c sha256.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o timeout.o -c timeout.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o setcpuaffinity.o -c setcpuaffinity.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o monotonic.o -c monotonic.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o mt19937-64.o -c mt19937-64.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o resp_parser.o -c resp_parser.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o call_reply.o -c call_reply.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o script.o -c script.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o functions.o -c functions.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o commands.o -c commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o strl.o -c strl.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o connection.o -c connection.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o unix.o -c unix.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o logreqres.o -c logreqres.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rdma.o -c rdma.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o scripting_engine.o -c scripting_engine.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o entry.o -c entry.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o vset.o -c vset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/script_lua.o -c lua/script_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/function_lua.o -c lua/function_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/engine_lua.o -c lua/engine_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/debug_lua.o -c lua/debug_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace.o -c trace/trace.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_commands.o -c trace/trace_commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_db.o -c trace/trace_db.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_cluster.o -c trace/trace_cluster.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_server.o -c trace/trace_server.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_rdb.o -c trace/trace_rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_aof.o -c trace/trace_aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-cli.o -c valkey-cli.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o serverassert.o -c serverassert.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cli_common.o -c cli_common.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cli_commands.o -c cli_commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-benchmark.o -c valkey-benchmark.c cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-server threads_mngr.o adlist.o vector.o quicklist.o ae.o anet.o dict.o hashtable.o kvstore.o server.o sds.o zmalloc.o lzf_c.o lzf_d.o pqsort.o zipmap.o sha1.o ziplist.o release.o memory_prefetch.o io_threads.o networking.o util.o object.o db.o replication.o rdb.o t_string.o t_list.o t_set.o t_zset.o t_hash.o config.o aof.o pubsub.o multi.o debug.o sort.o intset.o syncio.o cluster.o cluster_legacy.o cluster_slot_stats.o crc16.o cluster_migrateslots.o endianconv.o commandlog.o eval.o bio.o rio.o rand.o memtest.o syscheck.o crcspeed.o crccombine.o crc64.o bitops.o sentinel.o notify.o setproctitle.o blocked.o hyperloglog.o latency.o sparkline.o valkey-check-rdb.o valkey-check-aof.o geo.o lazyfree.o module.o evict.o expire.o geohash.o geohash_helper.o childinfo.o allocator_defrag.o defrag.o siphash.o rax.o t_stream.o listpack.o localtime.o lolwut.o lolwut5.o lolwut6.o lolwut9.o acl.o tracking.o socket.o tls.o sha256.o timeout.o setcpuaffinity.o monotonic.o mt19937-64.o resp_parser.o call_reply.o script.o functions.o commands.o strl.o connection.o unix.o logreqres.o rdma.o scripting_engine.o entry.o vset.o lua/script_lua.o lua/function_lua.o lua/engine_lua.o lua/debug_lua.o trace/trace.o trace/trace_commands.o trace/trace_db.o trace/trace_cluster.o trace/trace_server.o trace/trace_rdb.o trace/trace_aof.o ../deps/libvalkey/lib/libvalkey.a ../deps/lua/src/liblua.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-benchmark ae.o anet.o valkey-benchmark.o adlist.o dict.o zmalloc.o serverassert.o release.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-cli anet.o adlist.o dict.o valkey-cli.o zmalloc.o release.o ae.o serverassert.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o cli_commands.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/linenoise/linenoise.o ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto install valkey-server valkey-sentinel install valkey-server valkey-check-rdb install valkey-server valkey-check-aof cc -o valkey-tls.so tls.c -shared -fPIC -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -DBUILD_TLS_MODULE=2 ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src' Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 48608 Testing unit/dump [ready]: 48609 Testing unit/other [ready]: 48613 Testing unit/querybuf [ready]: 48610 Testing unit/introspection-2 [ready]: 48612 Testing unit/latency-monitor [ready]: 48606 Testing unit/keyspace [ready]: 48611 Testing unit/sort [ready]: 48607 Testing unit/functions [ready]: 48614 Testing unit/hashexpire [ready]: 48618 Testing unit/geo [ready]: 48616 Testing unit/replybufsize [ready]: 48617 Testing unit/memefficiency [ready]: 48615 Testing unit/hyperloglog [ready]: 48620 Testing unit/introspection [ready]: 48621 Testing unit/acl [ready]: 48619 Testing unit/client-eviction [ignore]: CVE-2025-32023: Sparse HLL XZERO overflow triggers crash: large memory flag not provided [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (5 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: RESTORE can set an absolute expire (0 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: RESTORE can set LRU (0 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: RESTORE returns an error of the key already exists (1 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (22 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: Listpack: SORT BY hash field (10 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT LIST with ADDR filter (1 ms) [ok]: CLIENT LIST with LADDR filter (0 ms) [ok]: CLIENT LIST with MAXAGE filter (0 ms) [ok]: CLIENT LIST with TYPE filter (0 ms) [ok]: CLIENT LIST with USER filter (1 ms) [ok]: CLIENT LIST with SKIPME filter (0 ms) [ok]: CLIENT LIST with multiple IDs and TYPE filter (3 ms) [ok]: CLIENT LIST with filters matching no clients (1 ms) [ok]: CLIENT LIST with NAME filter (0 ms) [ok]: CLIENT LIST with FLAGS filter (0 ms) [ok]: CLIENT LIST with TYPE filter (0 ms) [ok]: CLIENT LIST with multiple filters (0 ms) [ok]: HGETEX EX expiry (40 ms) [ok]: The microsecond part of the TIME command will not overflow (1 ms) [ok]: HGETEX EX with mix of existing and non-existing fields (0 ms) [ok]: HGETEX EX on more then 1 field (0 ms) [ok]: HGETEX EX -> PERSIST (0 ms) [ok]: HGETEX EX on non-exist field (0 ms) [ok]: HGETEX EX on non-exist key (0 ms) [ok]: HGETEX EX with duplicate field names (1 ms) [ok]: HGETEX EX overwrites existing field TTL with bigger value (0 ms) [ok]: GEO with wrong type src key (6 ms) [ok]: Connections start with the default user (2 ms) [ok]: FUNCTION - Basic usage (5 ms) [ok]: Coverage: HELP commands (17 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: DEL against a single item (3 ms) [ok]: HGETEX EX overwrites existing field TTL with smaller value (0 ms) [ok]: GEO with non existing src key (6 ms) [ok]: It is possible to create new users (0 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: LATENCY HISTOGRAM all commands (3 ms) [ok]: Vararg DEL (1 ms) [ok]: HGETEX PX expiry (20 ms) [ok]: GEO BYLONLAT with empty search (10 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: Untagged multi-key commands (3 ms) [ok]: HGETEX PX with mix of existing and non-existing fields (74 ms) [ok]: GEO BYMEMBER with non existing member (9 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: Coverage: ECHO (0 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (9 ms) [ok]: KEYS with pattern (13 ms) [ok]: HGETEX PX on more then 1 field (6 ms) [ok]: GEOADD create (1 ms) [ok]: New users start disabled (0 ms) [ok]: FUNCTION - Create a library with wrong name format (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: KEYS to get all keys (1 ms) [ok]: HGETEX PX -> PERSIST (1 ms) [ok]: GEOADD update (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: FUNCTION - Create library with unexisting engine (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: DBSIZE (0 ms) [ok]: HGETEX PX on non-exist field (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: KEYS with hashtag (1 ms) [ok]: HGETEX PX on non-exist key (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: DEL all keys (3 ms) [ok]: HGETEX PX with duplicate field names (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: KEYS with empty DB (0 ms) [ok]: HGETEX PX overwrites existing field TTL with bigger value (4 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (1 ms) [ok]: HGETEX PX overwrites existing field TTL with smaller value (1 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: HGETEX EXAT expiry (1 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: HGETEX EXAT with mix of existing and non-existing fields (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: HGETEX EXAT on more then 1 field (3 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: By default users are not able to access any key (1 ms) [ok]: FUNCTION - test fcall negative number of keys (2 ms) [ok]: HGETEX EXAT -> PERSIST (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: HGETEX EXAT on non-exist field (1 ms) [ok]: Check geoset values (8 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: HGETEX EXAT on non-exist key (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: FUNCTION - test wrong subcommand (1 ms) [ok]: HGETEX EXAT with duplicate field names (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: By default, only default user is able to subscribe to any channel (15 ms) [ok]: HGETEX EXAT overwrites existing field TTL with bigger value (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: HGETEX EXAT overwrites existing field TTL with smaller value (9 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: HGETEX PXAT expiry (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: HGETEX PXAT with mix of existing and non-existing fields (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: HGETEX PXAT on more then 1 field (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: HGETEX PXAT -> PERSIST (1 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: HGETEX PXAT on non-exist field (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: HGETEX PXAT on non-exist key (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: HGETEX PXAT with duplicate field names (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with bigger value (2 ms) [ok]: GEORADIUS with multiple WITH* tokens (20 ms) [ok]: HGETEX PXAT overwrites existing field TTL with smaller value (0 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: HGETEX EX overwrites existing field TTL with bigger value (3 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: HGETEX EX overwrites existing field TTL with smaller value (0 ms) [ok]: GEORADIUS with ANY but no COUNT (1 ms) [ok]: HGETEX PX overwrites existing field TTL with bigger value (1 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: HGETEX PX overwrites existing field TTL with smaller value (1 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: HGETEX EXAT overwrites existing field TTL with bigger value (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: HGETEX EXAT overwrites existing field TTL with smaller value (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with bigger value (10 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with smaller value (0 ms) [ok]: GEORADIUSBYMEMBER member does not exist (0 ms) [ok]: HGETEX - verify no change when field does not exist (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: HGETEX EX- multiple options used (EX + PX) (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: HGETEX EXAT- multiple options used (EXAT + PXAT) (1 ms) [ok]: GEOSEARCH FROMMEMBER member does not exist (0 ms) [ok]: HGETEX EX- missing TTL value (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: HGETEX EX- negative TTL (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: HGETEX EX- non-integer TTL (0 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: HGETEX EX- missing FIELDS keyword (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: HGETEX EX- wrong numfields count (too few fields) (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: HGETEX EX- wrong numfields count (too many fields) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: HGETEX EX- key is wrong type (string instead of hash) (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: HGETEX EX with FIELDS 0 (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: HGETEX EX with negative numfields (0 ms) [ok]: GEOPOS missing element (0 ms) [ok]: HGETEX EX with missing key (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: HGETEX PX- missing TTL value (10 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: HGETEX PX- negative TTL (0 ms) [ok]: GEODIST missing elements (0 ms) [ok]: HGETEX PX- non-integer TTL (0 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: HGETEX PX- missing FIELDS keyword (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: HGETEX PX- wrong numfields count (too few fields) (0 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: HGETEX PX- wrong numfields count (too many fields) (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: HGETEX PX- key is wrong type (string instead of hash) (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (0 ms) [ok]: HGETEX PX with FIELDS 0 (0 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: HGETEX PX with negative numfields (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (4 ms) [ok]: HGETEX PX with missing key (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: HGETEX EXAT- missing TTL value (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (0 ms) [ok]: HGETEX EXAT- negative TTL (0 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: HGETEX EXAT- non-integer TTL (0 ms) [ok]: GEOSEARCH with small distance (5 ms) [ok]: By default, only default user is able to subscribe to any shard channel (34 ms) [ok]: HGETEX EXAT- missing FIELDS keyword (0 ms) [ok]: GEOSEARCH BYPOLYGON standard operations (4 ms) [ok]: HGETEX EXAT- wrong numfields count (too few fields) (0 ms) [ok]: GEOSEARCH BYPOLYGON across hemispheres (11 ms) [ok]: HGETEX EXAT- wrong numfields count (too many fields) (0 ms) [ok]: GEOSEARCH BYPOLYGON overlapping edges (3 ms) [ok]: HGETEX EXAT- key is wrong type (string instead of hash) (0 ms) [ok]: GEOSEARCH with exact zero distances (0 ms) [ok]: HGETEX EXAT with FIELDS 0 (10 ms) [ok]: HGETEX EXAT with negative numfields (1 ms) [ok]: HGETEX EXAT with missing key (0 ms) [ok]: HGETEX PXAT- missing TTL value (1 ms) [ok]: HGETEX PXAT- negative TTL (4 ms) [ok]: HGETEX PXAT- non-integer TTL (0 ms) [ok]: HGETEX PXAT- missing FIELDS keyword (0 ms) [ok]: HGETEX PXAT- wrong numfields count (too few fields) (1 ms) [ok]: HGETEX PXAT- wrong numfields count (too many fields) (0 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: HGETEX PXAT- key is wrong type (string instead of hash) (0 ms) [ok]: HGETEX PXAT with FIELDS 0 (0 ms) [ok]: HGETEX PXAT with negative numfields (1 ms) [ok]: HGETEX PXAT with missing key (0 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (0 ms) [ok]: It's possible to allow subscribing to a subset of channels (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (0 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (68 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (7 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (0 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (0 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (0 ms) [ok]: ACLs can block SELECT of all but a specific DB (37 ms) [ok]: SAVE - make sure there are all the types as values (274 ms) [ok]: ACLs can block all DEBUG subcommands except one (27 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (27 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: client evicted due to large argv (315 ms) [ok]: ACL GETUSER provides reasonable results (72 ms) [ok]: FUNCTION - test loading from rdb (403 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (500 ms) [ok]: RESTORE key with future RDB version, strict version check (1 ms) [ok]: RESTORE key with future RDB version, relaxed version check (2 ms) [ok]: DUMP of non existing key returns nil (1 ms) [ok]: ACL GETUSER provides correct results (93 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: client evicted due to large query buf (198 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: client evicted due to percentage of maxmemory (55 ms) [ok]: FUNCTION - test debug reload different options (120 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (14 ms) [ok]: HGETEX EX generates hexpire keyspace notification (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (30 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: HGETEX EX with multiple fields generates single notification (3 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (57 ms) [ok]: HGETEX EX on non-existent field generates no notification (8 ms) [ok]: HGETEX PX generates hexpire keyspace notification (10 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (36 ms) [ok]: HGETEX PX with multiple fields generates single notification (8 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (4 ms) [ok]: HGETEX PX on non-existent field generates no notification (14 ms) [ok]: FUNCTION - test function dump and restore (10 ms) [ok]: HGETEX EXAT generates hexpire keyspace notification (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: HGETEX EXAT with multiple fields generates single notification (9 ms) [ok]: FUNCTION - test function dump and restore with append argument (19 ms) [ok]: HGETEX EXAT on non-existent field generates no notification (10 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: HGETEX PXAT generates hexpire keyspace notification (0 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: HGETEX PXAT with multiple fields generates single notification (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (6 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: HGETEX PXAT on non-existent field generates no notification (6 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: HGETEX PERSIST generates hpersist keyspace notification (52 ms) [ok]: HGETEX EX 0/past time works correctly with 1 field (18 ms) [ok]: HGETEX PX 0/past time works correctly with 1 field (1 ms) [ok]: ACL LOG shows failed command executions at toplevel (185 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (0 ms) [ok]: ACL LOG is able to test similar events (8 ms) [ok]: ACL LOG is able to log keys access violations and key name (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (11 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (0 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: Memory efficiency with values in range 32 (881 ms) [ok]: ACL LOG can log failed auth attempts (49 ms) [ok]: verify reply buffer limits (772 ms) [ok]: HGETEX EXAT 0/past time works correctly with 1 field (130 ms) [ok]: ACLLOG - zero max length is correctly handled (21 ms) [ok]: ACL LOG entries are limited to a maximum amount (2 ms) [ok]: HGETEX PXAT 0/past time works correctly with 1 field (2 ms) [ok]: HSETEX KEEPTTL - preserves existing TTL of field (1 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: HSETEX EX - FIELDS 0 returns error (0 ms) [ok]: HSETEX EX - test negative ttl (0 ms) [ok]: HSETEX EX - test non-numeric ttl (7 ms) [ok]: When default user is off, new connections are not authenticated (7 ms) [ok]: HSETEX EX - overwrite field resets TTL (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (12 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (7 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: MIGRATE is caching connections (456 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (49 ms) [ok]: CLIENT LIST with multiple filters (1008 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: CLIENT LIST with IP filter (0 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (5 ms) [1/141 done]: unit/replybufsize (1 seconds) Testing unit/aofrw [ok]: FUNCTION - test function kill (405 ms) [ok]: CLIENT LIST with IPv6 filter (70 ms) [ok]: DEL against expired key (1217 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (24 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (1 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: Memory efficiency with values in range 64 (542 ms) [ok]: COPY for string does not copy data to no-integer DB (37 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: client evicted due to large multi buf (829 ms) [ok]: COPY basic usage for list - quicklist (121 ms) [ok]: default: load from include file, can access any channels (7 ms) [ok]: Quicklist: SORT BY key (50 ms) [ok]: COPY basic usage for list - listpack (18 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: Quicklist: SORT BY key with limit (18 ms) [ok]: Quicklist: SORT BY hash field (7 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (39 ms) [ok]: FUNCTION - test script kill not working on function (499 ms) [ok]: COPY basic usage for $type set (60 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (35 ms) [ok]: COPY basic usage for listpack sorted set (6 ms) [ok]: Alice: can execute all command (17 ms) [ok]: Bob: just execute @set and acl command (9 ms) [ok]: COPY basic usage for skiplist sorted set (33 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: ACL LOAD only disconnects affected clients (67 ms) [ok]: COPY basic usage for hashtable hash (41 ms) [ok]: ACL LOAD disconnects clients of deleted users (22 ms) [ok]: CLIENT LIST with CAPA filter (200 ms) [ok]: CLIENT KILL with IP filter (0 ms) [ok]: HSETEX EX - test mix of expiring and persistent fields (1103 ms) [ok]: HSETEX EX - test missing TTL (11 ms) [ok]: HSETEX EX - mismatched field/value count (8 ms) [ok]: COPY basic usage for stream (346 ms) [ok]: COPY basic usage for stream-cgroups (13 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (0 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (4 ms) [ok]: HSETEX EX 0/past time works correctly with 2 fields (20 ms) [ok]: ACL load and save (336 ms) [ok]: RANDOMKEY (8 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (21 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (1 ms) [ok]: HyperLogLog self test passes (2222 ms) [ok]: HSETEX PX 0/past time works correctly with 2 fields (39 ms) [ok]: PFADD without arguments creates an HLL value (21 ms) [ok]: ACL load and save with restricted channels (61 ms) [ok]: Validate a user can remove their own channel permissions (0 ms) [ok]: HSETEX EXAT 0/past time works correctly with 2 fields (53 ms) [ok]: Regression for pattern matching very long nested loops (61 ms) [ok]: Approximated cardinality after creation is zero (37 ms) [ok]: ACL LOAD does not crash server if current user is removed from ACL file (45 ms) [ok]: HSETEX PXAT 0/past time works correctly with 2 fields (28 ms) [ok]: HSETEX PX - test negative ttl (1 ms) [ok]: HSETEX PX - test non-numeric ttl (17 ms) [ok]: FUNCTION - test function kill not working on eval (589 ms) [ok]: FUNCTION - test function flush (4 ms) [ok]: HSETEX PX - overwrite field resets TTL (10 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (50 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: CLIENT LIST with IPv6 filter (1 ms) [ok]: HSETEX PX - test zero ttl expires immediately (10 ms) [ok]: PFADD works with empty string (regression) (26 ms) [ok]: HSETEX PX - test mix of expiring and persistent fields (49 ms) [ok]: HSETEX PX - test missing TTL (0 ms) [ok]: HSETEX PX - mismatched field/value count (1 ms) [ok]: HSETEX EX FNX - set only if none of the fields exist (0 ms) [ok]: HSETEX EX FXX - set only if all fields exist (1 ms) [ok]: HSETEX PX FNX - partial conflict returns 0 (0 ms) [ok]: HSETEX PX FXX - one field missing returns 0 (0 ms) [ok]: HSETEX EX - FNX and FXX conflict error (0 ms) [ok]: HSETEX EX - FXX does not create object in case key does not exist (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (40 ms) [ok]: CLIENT KILL with CAPA filter (2 ms) [ok]: Default user has access to all channels irrespective of flag (0 ms) [ok]: CLIENT KILL with NAME filter (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (0 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: CLIENT KILL with FLAGS filter (17 ms) [ok]: CLIENT KILL with TYPE filter (1 ms) [ok]: CLIENT KILL with multiple filters (1 ms) [ok]: Memory efficiency with values in range 128 (1242 ms) [ok]: FUNCTION - test function flush will re-create the lua engine (444 ms) [ok]: HSETEX is not replicating validation arguments (383 ms) [ok]: HEXPIRE - set TTL on existing field (26 ms) [ok]: HEXPIRE - TTL 0 deletes field (0 ms) [ok]: HEXPIRE - negative TTL returns error (0 ms) [ok]: HEXPIRE - wrong type key returns error (0 ms) [ok]: HEXPIRE NX - only set when field has no TTL (1 ms) [ok]: HEXPIRE XX - only set when field has TTL (0 ms) [ok]: HEXPIRE GT - only set if new TTL > existing TTL (26 ms) [ok]: HEXPIRE GT - Do not expire items when expiration in the past (0 ms) [ok]: HEXPIRE LT - only set if new TTL < existing TTL (1 ms) [ok]: query buffer resized correctly (2501 ms) [ok]: query buffer resized correctly when not idle (243 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: Only default user has access to all channels irrespective of flag (7 ms) [ok]: HEXPIRE - refresh TTL with new value (512 ms) [ok]: HEXPIRE on a non-existent field (should not create field) (0 ms) [ok]: HEXPIRE on a non-existent field (should not issue notifications) (1 ms) [ok]: HEXPIRE - conflicting conditions error (0 ms) [ok]: HEXPIRE - missing FIELDS error (1 ms) [ok]: HEXPIRE - no fields after FIELDS keyword (0 ms) [ok]: HEXPIRE - non-integer TTL error (0 ms) [ok]: HEXPIRE - non-existing key returns -2 (0 ms) [ok]: HEXPIRE EX - set TTL on multiple fields (0 ms) [ok]: HEXPIRE returns -2 on non-existing key (1 ms) [ok]: HEXPIRE - GT condition fails when field has no TTL (0 ms) [ok]: HEXPIRE - LT condition succeeds when field has no TTL (0 ms) [ok]: HSETEX HEXPIRE 0/past time works correctly with 1 field (1 ms) [ok]: HSETEX HPEXPIRE 0/past time works correctly with 1 field (8 ms) [ok]: HSETEX HEXPIREAT 0/past time works correctly with 1 field (1 ms) [ok]: HSETEX HPEXPIREAT 0/past time works correctly with 1 field (1 ms) [ok]: HTTL - persistent field returns -1 (0 ms) [ok]: HTTL - non-existent field returns -2 (0 ms) [ok]: HTTL - non-existent key returns -2 (0 ms) [ok]: HEXPIREAT - set absolute expiry on field (6 ms) [ok]: HEXPIREAT - timestamp in past deletes field immediately (0 ms) [ok]: HEXPIREAT - set TTL on multiple fields (existing + non-existing) (0 ms) [ok]: HEXPIREAT NX - only set when field has no TTL (0 ms) [ok]: HEXPIREAT XX - only set when field has TTL (1 ms) [ok]: HEXPIREAT GT - only set if new expiry > existing (50 ms) [ok]: HEXPIREAT LT - only set if new expiry < existing (1 ms) [ok]: HEXPIREAT - refresh TTL with new future timestamp (0 ms) [ok]: HEXPIREAT - TTL is accurate via HEXPIRETIME (134 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: HEXPIREAT - conflicting options error (24 ms) [ok]: HEXPIREAT - missing FIELDS keyword (2 ms) [ok]: HEXPIREAT - no fields after FIELDS (8 ms) [ok]: HEXPIREAT - non-integer timestamp (0 ms) [ok]: HEXPIREAT - non-existing key returns -2 (0 ms) [ok]: HEXPIRETIME - returns expiry timestamp for single field with TTL (0 ms) [ok]: HEXPIRETIME - field has no TTL returns -1 (1 ms) [ok]: HEXPIRETIME - field does not exist returns -2 (39 ms) [ok]: HEXPIRETIME - key does not exist returns -2 (0 ms) [ok]: HEXPIRETIME - multiple fields mixed cases (1 ms) [ok]: HEXPIRETIME - no FIELDS keyword (9 ms) [ok]: HEXPIRETIME - FIELDS 0 (0 ms) [ok]: HEXPIRETIME - wrong FIELDS count (0 ms) [ok]: HEXPIRETIME - wrong type key (49 ms) [ok]: CLIENT KILL with multiple filters including idle time (1012 ms) [ok]: CLIENT LIST with NOT-NAME filter (1 ms) [ok]: CLIENT LIST with NOT-FLAGS filter (0 ms) [ok]: CLIENT LIST with NOT-TYPE filter (0 ms) [ok]: CLIENT LIST with multiple negative filters (1 ms) [ok]: CLIENT LIST with multiple id filters (0 ms) [ok]: CLIENT KILL with multiple id filters (1 ms) [ok]: HPEXPIREAT - set absolute expiry with ms precision (0 ms) [ok]: HPEXPIREAT - past timestamp deletes field immediately (1 ms) [ok]: HPEXPIREAT - non-existent key returns -2 (0 ms) [ok]: HPEXPIREAT - mixed fields (0 ms) [ok]: HPEXPIREAT - GT and LT options with success and failure cases (1 ms) [ok]: Test latency events logging (3475 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: HPEXPIREAT - invalid inputs (43 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: HPEXPIRETIME - check with multiple fields (0 ms) [ok]: HPERSIST - field does not exist (1 ms) [ok]: HPERSIST - key does not exist (0 ms) [ok]: HPERSIST - field exists but no expiration (0 ms) [ok]: HPERSIST - field exists with expiration (1 ms) [ok]: HPERSIST - multiple fields with mixed state (0 ms) [ok]: HPERSIST, then HEXPIRE, check new TTL is set (8 ms) [ok]: FUZZ stresser with data model binary (3325 ms) [ok]: HRANDFIELD - CASE 1: negative count (210 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: HRANDFIELD - CASE 2: The number of requested elements is greater than the number of elements inside the hash (281 ms) [ok]: Memory efficiency with values in range 1024 (1502 ms) [ok]: HRANDFIELD - CASE 3: The number of elements inside the hash is not greater than 3 times the number of requested elements (232 ms) [ok]: HRANDFIELD - CASE 4: The number of elements inside the hash is greater than 3 times the number of requested elements (151 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (19 ms) [ok]: Test loading duplicate users in config on startup (3 ms) [ok]: CLIENT LIST with multiple negative filters (1016 ms) [ok]: CLIENT LIST with NOT-IP filter (32 ms) [ok]: HRANDFIELD - returns null response when all fields are expired (189 ms) [ok]: RENAME Preserves Field TTLs (7 ms) [ok]: RESTORE Preserves Field TTLs (10 ms) [ok]: COPY Preserves TTLs (18 ms) [ok]: Hash Encoding Transitions with TTL - Add TTL to Existing Fields (11 ms) [ok]: KEYS with empty DB in cluster mode (0 ms) [ok]: KEYS with empty slot in cluster mode (0 ms) [ok]: HyperLogLogs are promote from sparse to dense (2616 ms) [ok]: Change hll-sparse-max-bytes (5 ms) [2/141 done]: unit/keyspace (5 seconds) Testing unit/quit [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (262 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (0 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (3 ms) [ok]: client evicted due to watched key list (3842 ms) [ok]: CLIENT LIST with IPv6 negative filter (1 ms) [3/141 done]: unit/quit (0 seconds) Testing unit/wait [ok]: Hash Encoding Transitions with TTL - Create New Fields with TTL (891 ms) [ok]: HGETALL skips expired fields (28 ms) [ok]: HSCAN skips expired fields (31 ms) [ok]: MOVE preserves field TTLs (9 ms) [ok]: CLIENT LIST with NOT-CAPA filter (59 ms) [ok]: CLIENT KILL with NOT-IP filter (1 ms) [ok]: CLIENT KILL with NOT-CAPA filter (0 ms) [ok]: CLIENT KILL with NOT-NAME filter (1 ms) [ok]: CLIENT KILL with NOT-FLAGS filter (0 ms) [ok]: query buffer resized correctly with fat argv (2767 ms) [ok]: CLIENT KILL with NOT-TYPE filter (12 ms) [ok]: CLIENT KILL with multiple negative filters (0 ms) [4/141 done]: unit/querybuf (6 seconds) Testing unit/oom-score-adj [ok]: HSET - overwrite expired field without TTL clears expiration (110 ms) [ok]: CONFIG SET oom-score-adj works as expected (234 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (1 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [ok]: TOUCH alters the last access time of a key (3109 ms) [ok]: HINCRBY - on expired field (301 ms) [ok]: ACL from config file and config rewrite (872 ms) [ok]: HINCRBYFLOAT - on expired field (113 ms) [ok]: HSET - overwrite unexpired field removes TTL (1 ms) [5/141 done]: unit/oom-score-adj (0 seconds) Testing unit/maxmemory [ok]: HDEL - expired field is removed without triggering expiry logic (44 ms) [ok]: HDEL on field with TTL, then re-add and check TTL is gone (1 ms) [ok]: ACL still denies individual renamed commands (1 ms) [ok]: ACL command classes aren't affected by command renaming (1 ms) [ok]: ACL GETUSER provides correct results when commands renamed (19 ms) [ok]: expired_fields metric increments by one when single hash field expires (101 ms) [ok]: Test ACL LOAD works on primary (32 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (125 ms) [ok]: CLIENT KILL with both positive and negative filters including idle time (1103 ms) [ok]: CLIENT LIST with illegal arguments (1 ms) [ok]: client input output and command process statistics (1 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: expired_fields metric tracks multiple field expirations with keyspace notifications (589 ms) [ok]: Setup slave (974 ms) [ok]: WAIT out of range timeout (milliseconds) (5 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (13 ms) [ok]: FUZZ stresser with data model alpha (3574 ms) [ok]: Test ACL LOAD works on replica (1015 ms) [ok]: Memory efficiency with values in range 16384 (3910 ms) [ok]: Key TTL expires before field TTL: entire hash should be deleted timeunit: s, (1104 ms) [6/142 done]: unit/memefficiency (8 seconds) Testing unit/scripting [ok]: WAIT should not acknowledge 2 additional copies of the data (1049 ms) [7/142 done]: unit/acl (8 seconds) Testing unit/acl-v2 [ok]: EVAL - Does Lua interpreter replies to our requests? (2 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (10 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (3 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (3 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (96 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (0 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (0 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Validate read and write permissions format (1 ms) [ok]: Validate key permissions format - empty and omitted pattern (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (2 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (43 ms) [ok]: Test BITFIELD with read and write permissions (11 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (4 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (92 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (3 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (491 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (8 ms) [ok]: EVAL - Numerical sanity check from bitop (11 ms) [ok]: EVAL - Verify minimal bitop functionality (7 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (9 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2024 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (30 ms) [ok]: CLIENT command unhappy path coverage (4 ms) [ok]: CLIENT KILL close the client connection during bgsave (55 ms) [ok]: TOUCH alters the last access time of a key in no-touch mode (3003 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (51 ms) [ok]: Field TTL expires before key TTL: only the specific field should expire: s, (1091 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (70 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (80 ms) [ok]: MONITOR can log executed commands (3 ms) [ok]: MONITOR properly escapes special characters through sdscatrepr (0 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [8/142 done]: unit/acl-v2 (1 seconds) Testing unit/bitops [ok]: MONITOR supports redacting command arguments (45 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR correctly records SET EX in MULTI-EXEC (0 ms) [ok]: MONITOR log blocked command only once (2 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (1 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (16 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: CONFIG GET should return sorted output (3 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1105 ms) [ok]: BITCOUNT against wrong type (1 ms) [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: Key and field TTL expire simultaneously: entire hash should be deleted: s, (1031 ms) [ok]: HyperLogLog sparse encoding stress test (5032 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1159 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (3 ms) [ok]: errors stats for GEOADD (1 ms) [ok]: command stats for EXPIRE (0 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (13 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of commands (8 ms) [ok]: COMMAND GETKEYS GET (1 ms) [ok]: COMMAND GETKEYSANDFLAGS (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (9 ms) [ok]: COMMAND GETKEYS EVAL with keys (1 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (11 ms) [ok]: COMMAND LIST syntax error (19 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (2 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (27 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (20 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (8 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (10 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (10 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (10 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (10 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (11 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (0 ms) [ok]: EVAL command is marked with movablekeys (1 ms) [ok]: SORT command is marked with movablekeys (0 ms) [ok]: SORT_RO command is marked with movablekeys (8 ms) [ok]: MIGRATE command is marked with movablekeys (0 ms) [ok]: GEORADIUS command is marked with movablekeys (1 ms) [ok]: FUZZ stresser with data model compr (3275 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1161 ms) [9/142 done]: unit/introspection-2 (10 seconds) Testing unit/networking [ok]: WAIT replica multiple clients unblock - reuse last result (203 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (4 ms) [ok]: CONFIG save params special case handled properly (1379 ms) [ok]: CONFIG sanity (50 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (85 ms) [ok]: CONFIG SET port number (243 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (4252 ms) [ok]: CONFIG REWRITE sanity (380 ms) [ok]: BGSAVE (396 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: CONFIG SET bind address (548 ms) [ok]: Millisecond/Seconds precision (1547 ms) [ok]: Measures elapsed time os.clock() (3039 ms) [ok]: Prohibit dangerous lua methods in sandbox (5 ms) [ok]: Setup a new replica (1153 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (40 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (6 ms) [ok]: BITCOUNT fuzzing without start/end (2536 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (10763 ms) [ok]: Key TTL expires before field TTL: entire hash should be deleted timeunit: ms (1047 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (1770 ms) [ok]: CONFIG SET with multiple args (84 ms) [ok]: CONFIG SET rollback on set error (28 ms) [ok]: CONFIG SET bind-source-addr (1867 ms) [ok]: CONFIG SET rollback on apply error (289 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: CONFIG GET hidden configs (17 ms) [ok]: CONFIG GET multiple args (10 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (2331 ms) [ok]: valkey-server command line arguments - error cases (40 ms) [ok]: WAIT in script will work (1434 ms) [ok]: Field TTL expires before key TTL: only the specific field should expire: ms (1129 ms) [ok]: WAITAOF local copy before fsync (95 ms) [ok]: WAITAOF local copy everysec (124 ms) [ok]: Default bind address configuration handling (1409 ms) [ok]: Key and field TTL expire simultaneously: entire hash should be deleted: ms (1080 ms) [ok]: Protected mode works as expected (111 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (1768 ms) [ok]: WAITAOF local copy with appendfsync always (253 ms) [ok]: WAITAOF local wait and then stop aof (34 ms) [ok]: WAITAOF local on server with aof disabled (1 ms) [ok]: tot-net-out for replica client (2220 ms) [ok]: CLIENT LIST can filter by LIB-NAME (10 ms) [ok]: CLIENT LIST can filter by LIB-VER (0 ms) [ok]: CLIENT LIST can filter by DB number (1 ms) [ok]: CLIENT KILL can filter by DB (0 ms) [ok]: CLIENT KILL can filter by LIB-NAME (1 ms) [ok]: CLIENT KILL can filter by LIB-VER (0 ms) [ok]: CLIENT LIST can filter by NOT-LIB-NAME (8 ms) [ok]: CLIENT LIST can filter by NOT-LIB-VER (0 ms) [ok]: CLIENT LIST can filter by NOT-DB number (0 ms) [ok]: CLIENT KILL can filter by NOT-DB (0 ms) [ok]: CLIENT KILL can filter by NOT-LIB-NAME (0 ms) [ok]: CLIENT KILL can filter by NOT-LIB-VER (1 ms) [ok]: EVAL does not leak in the Lua stack (3736 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (4 ms) [ok]: Number conversion precision test (issue #1118) (2 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (2 ms) [ok]: Scripts can handle commands with incorrect arity (2 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (30 ms) [ok]: CLUSTER RESET can not be invoke from within a script (10 ms) [ok]: Script with RESP3 map (1 ms) [10/142 done]: unit/networking (6 seconds) Testing unit/obuf-limits [ok]: WAITAOF local if AOFRW was postponed (672 ms) [ok]: MIGRATE cached connections are released after some time (15016 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: BITCOUNT fuzzing with start/end (4069 ms) [ok]: BITCOUNT with just start (1 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: Script return recursive object (375 ms) [ok]: BITCOUNT with illegal arguments (34 ms) [ok]: valkey-server command line arguments - allow passing option name and option value in the same arg (611 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (4 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (1 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (0 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (14 ms) [ok]: MIGRATE is able to migrate a key between two instances (426 ms) [ok]: Script check unpack with massive arguments (239 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (0 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Millisecond/Seconds precision (1501 ms) [ok]: Ensure that key-level PERSIST on the key don't affect field TTL (1 ms) [ok]: Verify error when hash expire commands num fields is not provided (0 ms) [ok]: Try trick global protection 2 (68 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Hash ttl - check command stats (2 ms) [ok]: valkey-server command line arguments - wrong usage that we support anyway (536 ms) [ok]: MIGRATE is able to copy a key between two instances (517 ms) [ignore]: large memory flag not provided [ok]: BITOP and fuzzing (770 ms) [ok]: valkey-server command line arguments - allow option value to use the `--` prefix (325 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (13777 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (2 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: WAITAOF replica copy before fsync (79 ms) [ok]: valkey-server command line arguments - option name and option value in the same arg and `--` prefix (442 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (411 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (865 ms) [ok]: Check consistency of different data types after a reload (6457 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (365 ms) [ok]: Timedout script does not cause a false dead client (377 ms) [ok]: BITOP or fuzzing (1344 ms) [ok]: MIGRATE propagates TTL correctly (738 ms) [ok]: Timedout script link is still usable after Lua returns (206 ms) [ok]: Setup replica and check field expiry after full sync (1065 ms) [ok]: HASH TTL - replicated TTL is absolute and consistent on replica (1 ms) [ok]: HASH TTL - field expired on master gets deleted on replica (27 ms) [ok]: HASH TTL - replica retains TTL and field before expiration (1 ms) [ok]: WAITAOF replica copy everysec (1146 ms) [ok]: HSETEX with expired time is propagated to the replica (7 ms) [ok]: HGETEX with expired time is propagated to the replica (13 ms) [ok]: HEXPIREAT with expired time is propagated to the replica (1 ms) [ok]: BITOP xor fuzzing (713 ms) [ok]: Same dataset digest if saving/reloading as AOF? (1527 ms) [ok]: BITOP NOT fuzzing (272 ms) [ok]: BITOP with integer encoded source objects (0 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS against wrong type (1 ms) [ok]: valkey-server command line arguments - save with empty input (1807 ms) [ok]: BITPOS will illegal arguments (0 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (1 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (11 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (0 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (6 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (268 ms) [ok]: Timedout scripts and unblocked command (1160 ms) [ok]: valkey-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (307 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (364 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1152 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (204 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (216 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (1 ms) [ok]: valkey-server command line arguments - dir multiple times (459 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (299 ms) [ok]: Before the replica connects we issue two EVAL commands (7 ms) [ok]: Replication Primary -> R1 (1082 ms) [11/143 done]: unit/bitops (11 seconds) Testing unit/slowlog [ok]: eviction due to input buffer of a dead client, client eviction: true (5317 ms) [ok]: auth check before command existence check and command arity check (8 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: SLOWLOG - check that it starts with an empty log (7 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (208 ms) [ok]: client evicted due to pubsub subscriptions (15417 ms) [ok]: client evicted due to tracking redirection (62 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - zero max length is correctly handled (39 ms) [ok]: cannot modify protected configuration - local (51 ms) [ok]: Connect a replica to the master instance (782 ms) [ok]: Replication of script multiple pushes to list with BLPOP (20 ms) [ok]: Lua scripts using SELECT are replicated correctly (8 ms) [ok]: SLOWLOG - max entries is correctly handled (296 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: Big Quicklist: SORT BY key (1208 ms) [ok]: Big Quicklist: SORT BY key with limit (12 ms) [ok]: SLOWLOG - logged entry sanity check (204 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (7 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (5 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (57 ms) [ok]: SLOWLOG - too long arguments are trimmed (0 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: Chain Replication (Primary -> R1 -> R2) preserves TTL (1159 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (734 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2304 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2382 ms) [ok]: SLOWLOG - can be disabled (455 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (5 ms) [ok]: SLOWLOG - the commands in script are recorded normally - is_eval: 0 (6 ms) [ok]: SLOWLOG - the commands in script are recorded normally - is_eval: 1 (30 ms) [ok]: Big Quicklist: SORT BY hash field (1440 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [12/143 done]: unit/slowlog (2 seconds) Testing unit/shutdown [ok]: WAITAOF replica copy everysec->always with AOFRW (664 ms) [ok]: Replica Failover (1229 ms) [ok]: WAITAOF replica copy appendfsync always (180 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (208 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (39 ms) Waiting for process 51040 to exit... [ok]: Temp rdb will be deleted in signal handle (200 ms) [ok]: Connect a replica to the master instance (270 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (8 ms) [ok]: Redis.set_repl() don't accept invalid values (7 ms) [ok]: Test selective replication of certain commands from Lua (13 ms) [ok]: PRNG is seeded randomly for command replication (4 ms) [ok]: Using side effects is not a problem with command replication (3 ms) [ok]: WAITAOF replica copy if replica is blocked (633 ms) [ok]: RDB save will be failed in shutdown (4 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (302 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (17 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (10 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: Hash table: SORT BY key (30 ms) [ok]: Hash table: SORT BY key with limit (4 ms) [ok]: Hash table: SORT BY hash field (68 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (74 ms) [13/143 done]: unit/shutdown (2 seconds) Testing unit/tracking [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (6 ms) [ok]: test RESP2/2 double protocol parsing (2 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1243 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [ok]: WAITAOF on promoted replica (102 ms) [ok]: Script block the time in some expiration related commands (90 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (3147 ms) [ok]: APPEND basics (10 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: config during loading (4262 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (15 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (3 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (6 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (16 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (5 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (10 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (64 ms) [ok]: Client tracking prefixes memory overhead (1258 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: EVAL - Scripts do not block on brpop command (15 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (4 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (27 ms) [ok]: Clients can enable the BCAST mode with prefixes (42 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (2 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (5 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (5 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (21 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (5 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Promotion to primary (2831 ms) [ok]: APPEND fuzzing (1395 ms) [ok]: FLUSHDB (1 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (773 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (377 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (11 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: Extended Redis Compatibility config (7 ms) [ok]: Tracking gets notification of lazy expired keys (201 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: RESP3 based basic invalidation (0 ms) [ok]: RESP3 tracking redirection (0 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (2 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (10 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (2 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (5457 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (124 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (0 ms) [ok]: Tracking invalidation message of eviction keys should be before response (2 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2183 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: Tracking gets notification on tracking table key eviction (98 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (4 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (294 ms) [ok]: Tracking info is correct (2 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: Regression test for #11715 (1 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: RESP2 based basic invalidation with client reply off (58 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (1 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: CLIENT TRACKINGINFO when start (1 ms) [ok]: Coverage: Basic CLIENT CACHING (5 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: Don't rehash if server has child process (1002 ms) [14/143 done]: unit/tracking (4 seconds) Testing unit/commandlog [ok]: COMMANDLOG - check that it starts with an empty log (0 ms) [ok]: Process title set as expected (1 ms) [ok]: AOF rewrite during write load: RDB preamble=no (16656 ms) [ok]: FUNCTION - test loading function during the flush async (26391 ms) [ok]: FUNCTION - test function wrong argument (2 ms) [ok]: COMMANDLOG - only logs commands exceeding the threshold (407 ms) [ok]: COMMANDLOG - zero max length is correctly handled (45 ms) [ok]: COMMANDLOG - max entries is correctly handled (84 ms) [ok]: COMMANDLOG - GET optional argument to limit output len works (13 ms) [ok]: COMMANDLOG - RESET subcommand works (21 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (2180 ms) [ok]: Cluster config file latency (524 ms) [ok]: COMMANDLOG - logged entry sanity check (231 ms) [ok]: COMMANDLOG slow - Certain commands are omitted that contain sensitive information (2 ms) [ok]: COMMANDLOG slow - Some commands can redact sensitive fields (12 ms) [ok]: Hash with TTL fields migrates correctly between nodes (116 ms) [ok]: COMMANDLOG slow - Rewritten commands are logged as their original command (13 ms) [ok]: COMMANDLOG slow - commands with too many arguments are trimmed (0 ms) [ok]: COMMANDLOG slow - too long arguments are trimmed (0 ms) [15/143 done]: unit/latency-monitor (29 seconds) Testing unit/info [ok]: COMMANDLOG slow - EXEC is not logged, just executed commands (201 ms) [ok]: Turning off AOF kills the background writing child if any (270 ms) [ok]: MEMORY commands during loading (4627 ms) [ok]: AOF rewrite of list with listpack encoding, string data (157 ms) [ok]: latencystats: disable/enable (4 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: latencystats: blocking commands (1 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Measures elapsed time os.clock() (3431 ms) [ok]: Prohibit dangerous lua methods in sandbox (5 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (4 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: COMMANDLOG slow - can clean older entries (215 ms) [ok]: latencystats: measure latency (52 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (19 ms) [ok]: errorstats: failed call NOSCRIPT error (5 ms) [ok]: errorstats: failed call NOGROUP error (5 ms) [ok]: errorstats: rejected call unknown command (34 ms) [ok]: errorstats: rejected call within MULTI/EXEC (6 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (13 ms) [ok]: CONFIG REWRITE handles rename-command properly (535 ms) [ok]: Connect a replica to the master instance (886 ms) [ok]: COMMANDLOG slow - can be disabled (421 ms) [ok]: COMMANDLOG slow - count must be >= -1 (0 ms) [ok]: COMMANDLOG slow - get all slow logs (1 ms) [ok]: WAITAOF master isn't configured to do AOF (1135 ms) [ok]: COMMANDLOG slow - blocking command is reported only after unblocked (82 ms) [ok]: COMMANDLOG slow - the commands in script are recorded normally - is_eval: 0 (3 ms) [ok]: COMMANDLOG slow - the commands in script are recorded normally - is_eval: 1 (9 ms) [ok]: COMMANDLOG large-reply - byte tracking with copy avoidance (1 ms) [16/143 done]: unit/commandlog (2 seconds) Testing unit/info-command [ok]: FUNCTION - creation is replicated to replica (136 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (2 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: WAITAOF replica isn't configured to do AOF (155 ms) Testing Valkey version 7.2.4 (00000000) [ok]: Extract version and sha1 details from info command and print (1 ms) [ok]: info command with at most one sub command (2 ms) [ok]: info command with one sub-section (0 ms) [ok]: info command with multiple sub-sections (1 ms) [17/143 done]: unit/info-command (1 seconds) Testing unit/lazyfree [ok]: AOF rewrite of list with quicklist encoding, string data (1323 ms) [ok]: Disconnecting the replica from master instance (965 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: AOF rewrite of list with listpack encoding, int data (318 ms) [ok]: FUNCTION - create on read only replica (2 ms) [ok]: FUNCTION - delete on read only replica (3 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (1176 ms) [ok]: UNLINK can reclaim memory in background (804 ms) [ok]: errorstats: limit errors will not increase indefinitely (1790 ms) [ok]: EVAL does not leak in the Lua stack (1900 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (8 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (4 ms) [ok]: Functions in the Redis namespace are able to report errors (4 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (5 ms) [ok]: CONFIG REWRITE handles alias config properly (1579 ms) [18/143 done]: unit/introspection (32 seconds) Testing unit/scan [ok]: stats: eventloop metrics (121 ms) [ok]: TTL Persistence in AOF aof-use-rdb-preamble yes (1959 ms) [ok]: {standalone} SCAN basic (170 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (886 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (674 ms) [ok]: Script return recursive object (614 ms) [ok]: {standalone} SCAN COUNT (290 ms) [ok]: AOF rewrite of set with intset encoding, string data (203 ms) [ok]: Script check unpack with massive arguments (139 ms) [ok]: Script read key with expiration set (1 ms) [ok]: {standalone} SCAN MATCH (97 ms) [ok]: Script del key with expiration set (9 ms) [ok]: Script ACL check (14 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (7 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Client output buffer hard limit is enforced (16726 ms) [ignore]: large memory flag not provided [ok]: {standalone} SCAN TYPE (262 ms) [ok]: {standalone} SCAN unknown type (86 ms) [ok]: lazy free a stream with all types of metadata (542 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [ok]: WAITAOF master sends PING after last write (1254 ms) [19/143 done]: unit/lazyfree (2 seconds) Testing unit/pubsub [ok]: {standalone} SCAN with expired keys (157 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (420 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (419 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (220 ms) [ok]: {standalone} SSCAN with encoding intset (1 ms) [ok]: {standalone} SSCAN with encoding listpack (1 ms) [ok]: {standalone} SSCAN with encoding hashtable (7 ms) [ok]: {standalone} HSCAN with encoding listpack (30 ms) [ok]: LIBRARIES - test shared function can access default globals (17 ms) [ok]: Pub/Sub PING on RESP2 (2 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: LIBRARIES - usage and code sharing (10 ms) [ok]: LIBRARIES - test registration failure revert the entire load (1 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (2 ms) [ok]: LIBRARIES - test registration with empty name (1 ms) [ok]: LIBRARIES - math.random from function load (8 ms) [ok]: LIBRARIES - redis.call from function load (10 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (1 ms) [ok]: PubSub messages with CLIENT REPLY OFF (93 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (0 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (2 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (8 ms) [ok]: {standalone} HSCAN with encoding hashtable (140 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (209 ms) [ok]: {standalone} ZSCAN with encoding listpack (1 ms) [ok]: TTL Persistence in AOF aof-use-rdb-preamble no (1206 ms) [ok]: Keyspace notifications: we receive keyspace notifications (58 ms) [ok]: Keyspace notifications: we receive keyevent notifications (55 ms) [ok]: Keyspace notifications: we can receive both kind of events (2 ms) [ok]: Keyspace notifications: we are able to mask events (4 ms) [ok]: Keyspace notifications: general events test (19 ms) [ok]: Keyspace notifications: list events test (0 ms) [ok]: {standalone} ZSCAN with encoding skiplist (173 ms) [ok]: {standalone} SCAN guarantees check under write load (15 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {standalone} SSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (0 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: {standalone} ZSCAN with NOSCORES (1 ms) [ok]: Timedout script does not cause a false dead client (277 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (100 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (1257 ms) [ok]: Keyspace notifications: set events test (210 ms) [ok]: Keyspace notifications: zset events test (0 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (1 ms) [ok]: LIBRARIES - load timeout (528 ms) [ok]: stats: instantaneous metrics (2035 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: LIBRARIES - verify global protection on the load run (19 ms) [ok]: Timedout script link is still usable after Lua returns (185 ms) [ok]: AOF rewrite of set with intset encoding, int data (144 ms) [ok]: LIBRARIES - named arguments (20 ms) [ok]: LIBRARIES - named arguments, bad function name (10 ms) [ok]: LIBRARIES - named arguments, bad callback type (12 ms) [ok]: LIBRARIES - named arguments, bad description (1 ms) [ok]: LIBRARIES - named arguments, unknown argument (7 ms) [ok]: LIBRARIES - named arguments, missing function name (14 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: stats: debug metrics (126 ms) [ok]: Keyspace notifications: expired events (background expire) (244 ms) [ok]: stats: client input and output buffer limit disconnections (181 ms) [ok]: WAITAOF master client didn't send any write command (1283 ms) [ok]: clients: pubsub clients (3 ms) [ok]: clients: watching clients (18 ms) [ok]: FUNCTION - test function restore with function name collision (265 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (1 ms) [ok]: FUNCTION - verify OOM on function load and function restore (10 ms) [ok]: FUNCTION - verify allow-omm allows running any command (2 ms) [ok]: Keyspace notification: expired event (Expiration time is already expired) (125 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (0 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (22 ms) [20/143 done]: unit/pubsub (1 seconds) Testing unit/auth [ok]: Server can trigger resizing (3374 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (2 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (996 ms) [ok]: HGETEX EX active expiry with single field (1103 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (6 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (299 ms) [ok]: FUNCTION - deny oom (0 ms) [21/143 done]: unit/info (6 seconds) Testing unit/bitfield [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: FUNCTION - allow stale (5 ms) [ok]: FUNCTION - valkey version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (11 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (15 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (11 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (12 ms) [ok]: FUNCTION - test getmetatable on script load (15 ms) [22/143 done]: unit/functions (35 seconds) Testing unit/expire [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (1 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: WAITAOF master client didn't send any command (1407 ms) [ok]: Server can rewind and trigger smaller slot resizing (996 ms) [ok]: CLUSTER FORGET with invalid node ID (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: For unauthenticated clients output buffer is limited (6 ms) [ok]: For once authenticated clients output buffer is NOT limited (0 ms) [ok]: Unauthenticated multibulk limit works in pipeline after AUTH (12 ms) [ok]: Timedout scripts and unblocked command (1892 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (709 ms) [ok]: AUTH fails when binary password is wrong (1 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (215 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: Server can resize empty dict (197 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (204 ms) [ok]: HGETEX EX active expiry with multiple fields (1186 ms) [ok]: Before the replica connects we issue two EVAL commands (6 ms) [ok]: test io-threads are runtime modifiable (178 ms) [ok]: test unixsocket options are set correctly (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (9890 ms) [23/143 done]: unit/other (37 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (0 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (0 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (973 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (2 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (2 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (0 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (13 ms) [ok]: Connect a replica to the master instance (832 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (46 ms) [ok]: Replication of script multiple pushes to list with BLPOP (56 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (6 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: HGETEX EX active expiry removes entire key when last field expires (1123 ms) [ok]: HGETEX EX and HPEXPIRE (0 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (573 ms) [ok]: BITFIELD overflow detection fuzzing (2284 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: primaryauth test with binary password dualchannel = yes (2255 ms) [ok]: WATCH will consider touched expired keys (1231 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (0 ms) [ok]: MIGRATE can correctly transfer large values (20171 ms) [ok]: MULTI / EXEC is not propagated (single write command) (99 ms) [ok]: HGETEX PX active expiry with single field (1201 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: MIGRATE can correctly transfer hashes (410 ms) [ok]: BITFIELD overflow wrap fuzzing (1200 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (1 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (233 ms) [ok]: SETEX - Wait for the key to expire (1237 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (1308 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (98 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (124 ms) [ok]: MULTI / EXEC with REPLICAOF (78 ms) [ok]: DISCARD should not fail during OOM (0 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (431 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (2773 ms) [ok]: Connect a replica to the master instance (811 ms) [ok]: MULTI and script timeout (426 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (42 ms) [ok]: MIGRATE timeout actually works (883 ms) [ok]: HGETEX PX active expiry with multiple fields (1135 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain commands from Lua (8 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: MIGRATE can migrate multiple keys at once (225 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: EXPIRE precision is now the millisecond (1115 ms) [ok]: BITFIELD: setup slave (855 ms) [ok]: BITFIELD: write on master, read on slave (5 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: EXEC and script timeout (403 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (709 ms) [ok]: PSETEX can set sub-second expires (121 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: AOF rewrite functions (165 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (355 ms) [24/143 done]: unit/bitfield (5 seconds) Testing unit/tls [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: EXPIRE / EXPIREAT / PEXPIRE / PEXPIREAT Expiration time is already expired (1 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (1 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (218 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (7882 ms) [ok]: MULTI-EXEC body and script timeout (422 ms) [ok]: BGREWRITEAOF is refused if already in progress (30 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (291 ms) [25/143 done]: unit/aofrw (40 seconds) Testing unit/violations [26/144 done]: unit/tls (1 seconds) Testing unit/pause [ok]: HGETEX PX active expiry removes entire key when last field expires (1051 ms) [ok]: HGETEX PX and HPEXPIRE (1 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (185 ms) [ok]: SORT adds integer field to list (10 ms) [ok]: just EXEC and script timeout (494 ms) [ok]: exec with write commands and state change (2 ms) [ok]: exec with read commands and stale replica state change (2 ms) [27/144 done]: unit/violations (0 seconds) Testing unit/pubsubshard [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (4 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (5459 ms) [ok]: test RESP2/3 false protocol parsing (10 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (5 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (7 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (3 ms) [ok]: test RESP3/2 double protocol parsing (5 ms) [ok]: PUBSUB command basics (5 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (286 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: RESTORE rejects zipmap with overlong field length encoding (CVE-2026-25243) (1 ms) [ok]: MULTI propagation of PUBLISH (55 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (2 ms) [ok]: primaryauth test with binary password dualchannel = no (2087 ms) [ok]: test RESP3/2 null protocol parsing (7 ms) [ok]: test RESP3/2 verbatim protocol parsing (12 ms) [ok]: test RESP3/2 true protocol parsing (9 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (3 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (3 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (6 ms) [ok]: Server should actively expire keys incrementally (676 ms) [ok]: TIME command using cached time (11 ms) [28/144 done]: unit/dump (41 seconds) Testing unit/limits [ok]: MULTI propagation of SCRIPT LOAD (97 ms) [ok]: PubSubShard with CLIENT REPLY OFF (117 ms) [ok]: Script block the time in some expiration related commands (92 ms) [ok]: RESTORE expired keys with expiration time (22 ms) [ok]: MULTI propagation of EVAL (101 ms) [29/144 done]: unit/auth (7 seconds) Testing unit/protocol [ok]: MULTI propagation of SCRIPT FLUSH (201 ms) [ok]: Handle an empty query (50 ms) [ok]: MULTI propagation of XREADGROUP (110 ms) [ok]: Handle an empty query in pipeline (8 ms) [ok]: HGETEX EXAT active expiry with single field (810 ms) [ok]: MULTI with SAVE (38 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (17 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (3 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: Negative multibulk length (68 ms) [ok]: Negative multibulk length in pipeline (1 ms) [ok]: Out of range multibulk length (4 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Mixing quoted and unquoted strings (1 ms) [ok]: Unbalanced single quotes (0 ms) [ok]: Unbalanced double quotes (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (19 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (14 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (13 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (7 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (14 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (27 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (5 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Protocol desync regression test #1 (96 ms) [ok]: Protocol desync regression test #2 (22 ms) [ok]: Protocol desync regression test #3 (57 ms) [ok]: Protocol desync regression test #4 (60 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (0 ms) [ok]: test verbatim str parsing (0 ms) [ok]: MULTI with BGREWRITEAOF (350 ms) [ok]: test large number of args (115 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (307 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (9 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redis.sha1hex() implementation (2 ms) [ok]: MULTI with config set appendonly (177 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: MULTI is rejected when CLIENT REPLY is ON/OFF/SKIP (0 ms) [ok]: Server should lazy expire keys (1042 ms) [ok]: CLIENT REPLY OFF/SKIP: multi command (110 ms) [ok]: AUTH errored inside MULTI will add the reply (110 ms) [ok]: setup replication for following tests (950 ms) [ok]: publish message to master and receive on replica (9 ms) [ok]: Check if maxclients works refusing connections (1183 ms) [ok]: HGETEX EXAT active expiry with multiple fields (885 ms) [ok]: HELLO without protover (1 ms) [ok]: HELLO and availability-zone (2 ms) [ok]: Big Hash table: SORT BY key (1733 ms) [30/144 done]: unit/limits (2 seconds) Testing unit/type/zset [ok]: Big Hash table: SORT BY key with limit (36 ms) [ok]: MULTI with FLUSHALL and AOF (317 ms) [ok]: Check encoding - listpack (0 ms) [ok]: ZSET basic ZADD and score update - listpack (3 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (1 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (5 ms) [ok]: Regression for a crash on zero-length multibulk (1 ms) [ok]: Regression for a crash with blocking ops and pipelining (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (11 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (8 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-element pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (0 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (0 ms) [ok]: ZINCRBY return value - listpack (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (10 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (14 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (6 ms) [ok]: ZLEXCOUNT advanced - listpack (0 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [31/144 done]: unit/protocol (2 seconds) Testing unit/type/set [ok]: ZREMRANGEBYSCORE basics - listpack (35 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (3 ms) [ok]: ZREMRANGEBYLEX basics - listpack (10 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (0 ms) [ok]: ZUNIONSTORE basics - listpack (13 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (10 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (0 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (4 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (0 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (1 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (69 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (4 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: SADD a non-integer against a large intset (14 ms) [ok]: SADD an integer larger than 64 bits (13 ms) [ok]: Test check paused info in info clients (2288 ms) [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: SADD an integer larger than 64 bits to a large intset (167 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (141 ms) [ok]: HGETEX EXAT active expiry removes entire key when last field expires (1062 ms) [ok]: HGETEX EXAT and HPEXPIRE (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (44 ms) [ok]: Measures elapsed time os.clock() (1517 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (14 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (350 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (66 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (3 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (50 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (138 ms) [ok]: Test write commands are paused by RO (5 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (2 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: Test eviction is skipped during client pause (2 ms) [ok]: Variadic SADD (107 ms) [32/144 done]: unit/pubsubshard (3 seconds) Testing unit/type/hash [ok]: Test both active and passive expires are skipped during client pause (106 ms) [ok]: Test that client pause starts at the end of a transaction (9 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: HRANDFIELD - listpack (15 ms) [ok]: HRANDFIELD - hashtable (16 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: Set encoding after DEBUG RELOAD (413 ms) [ok]: SREM basics - $type (2 ms) [ok]: SREM basics - $type (6 ms) [ok]: SREM basics - intset (2 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (1 ms) [ok]: Big Hash table: SORT BY hash field (1642 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (0 ms) [ok]: SORT BY hash field STORE (3 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (6 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (0 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (0 ms) [ok]: SORT regression for issue #19, sorting floats (1 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (15 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (47 ms) [ok]: SINTER with two sets - regular (111 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (3401 ms) [ok]: SINTERCARD with two sets - regular (34 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (113 ms) [ok]: SORT speed, 100 element list directly, 100 times (16 ms) [ok]: SORT speed, 100 element list BY , 100 times (33 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (65 ms) [ok]: SUNION with two sets - regular (9 ms) [ok]: SETRANGE with huge offset (10 ms) [ok]: SUNIONSTORE with two sets - regular (19 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (1 ms) [ok]: SUNION with non existing keys - regular (16 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (2 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (7 ms) [ok]: HGETEX PXAT active expiry with single field (1067 ms) [ok]: SORT STORE quicklist with the right options (66 ms) [ok]: EVAL does not leak in the Lua stack (1159 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (7 ms) [ok]: HRANDFIELD with - hashtable (849 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (35 ms) [ok]: SUNION with two sets - intset (6 ms) [ok]: SUNIONSTORE with two sets - intset (16 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (4 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (10 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: Test when replica paused, offset would not grow (16 ms) [ok]: Test replica offset would grow after unpause (2 ms) [ok]: Regression test for multi-exec with RANDOMKEY accessing the wrong per-slot dictionary (5 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (111 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (7 ms) [ok]: CLIENT UNBLOCK is not allow to unblock client blocked by CLIENT PAUSE (64 ms) [ok]: Script return recursive object (533 ms) [ok]: Script check unpack with massive arguments (42 ms) [ok]: Script read key with expiration set (25 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: HRANDFIELD with - listpack (495 ms) [ignore]: large memory flag not provided [ok]: HGETEX PXAT active expiry with multiple fields (1284 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2503 ms) [ok]: HSET/HLEN - Big hash creation (514 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (59 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (411 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (191 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (113 ms) [ok]: Timedout script does not cause a false dead client (72 ms) [ok]: HGET against the big hash (396 ms) [ok]: HGET against non existing key (4 ms) [ok]: HSET in update and insert mode (0 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: HMSET - big hash (74 ms) [ok]: HMGET against non existing key and fields (4 ms) [ok]: Hash commands against wrong type (11 ms) [ok]: HMGET - small hash (0 ms) [ok]: First server should have role slave after REPLICAOF (0 ms) [ok]: HMGET - big hash (89 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (7 ms) [ok]: HVALS - small hash (1 ms) [ok]: Timedout script link is still usable after Lua returns (273 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (10 ms) [ok]: HGETALL - big hash (85 ms) [ok]: HGETALL against non-existing key (2 ms) [ok]: HDEL and return value (17 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (1 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (1 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (24 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (3 ms) [ok]: HGETEX PXAT active expiry removes entire key when last field expires (1162 ms) [ok]: HGETEX PXAT and HPEXPIRE (1 ms) [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (1 ms) [ok]: sort_ro by in cluster mode (66 ms) [ok]: sort_ro get in cluster mode (0 ms) [ok]: HGETEX PERSIST removes expiry and prevents active expiry (287 ms) [ok]: HSTRLEN against the big hash (484 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (8 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [33/144 done]: unit/sort (47 seconds) Testing unit/type/stream-cgroups [ok]: Timedout scripts and unblocked command (826 ms) [ok]: Hash fuzzing #1 - 10 fields (132 ms) [ok]: HGETEX overwrite existing expiry with active expiry (215 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (1036 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: Regression test for #2995: MULTI/EXEC with different slot keys should not duplicate on AOF reload (137 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (13 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: XPENDING with IDLE (38 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (242 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (2 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (0 ms) [ok]: Hash fuzzing #2 - 10 fields (242 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (54 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (69 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (42 ms) [ok]: Blocking XREADGROUP: flushed DB (3 ms) [34/144 done]: unit/multi (11 seconds) Testing unit/type/string [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (19 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (3419 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (3 ms) [ok]: Blocking XREAD: key type changed with SET (10 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (64 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (18 ms) [ok]: SET and GET an item (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (464 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (97 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: Very big payload in GET/SET (136 ms) [ok]: Before the replica connects we issue two EVAL commands (14 ms) [ok]: SET command will remove expire (4 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (1 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (7992 ms) [ok]: No response for single command if client output buffer hard limit is enforced (127 ms) [ok]: HGETEX EX keyspace notifications for active expiry (1258 ms) [ok]: Connect a replica to the master instance (859 ms) [ok]: Replication of script multiple pushes to list with BLPOP (28 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1030 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (6 ms) [ok]: RENAME can unblock XREADGROUP with data (11 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (11 ms) [ok]: setup replication for following tests (625 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1054 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (10 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (58 ms) [ok]: XCLAIM can claim PEL items from another consumer (685 ms) [ok]: HGETEX PX keyspace notifications for active expiry (1075 ms) [ok]: Obuf limit, KEYS stopped mid-run (243 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (10444 ms) [35/144 done]: unit/obuf-limits (34 seconds) Testing unit/type/stream [ok]: XCLAIM without JUSTID increments delivery count (440 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2077 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: XCLAIM same consumer (218 ms) [ok]: GETEX propagate as to replica as PERSIST, UNLINK, or nothing (122 ms) [ok]: EXPIRE with NX option on a key with ttl (14 ms) [ok]: HGETEX EXAT keyspace notifications for active expiry (628 ms) [ok]: EXPIRE with NX option on a key without ttl (10 ms) [ok]: EXPIRE with XX option on a key with ttl (30 ms) [ok]: XADD wrong number of args (0 ms) [ok]: EXPIRE with XX option on a key without ttl (4 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (5 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (997 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: XADD with MAXLEN option (184 ms) [ok]: Server should not propagate the read command on lazy expire (177 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (108 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (94 ms) [ok]: import-source can be closed when import-mode is off (5 ms) [ok]: XADD with MAXLEN option and the '=' argument (407 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (752 ms) [ok]: Import mode should forbid active expiration (375 ms) [ok]: Import mode should forbid lazy expiration (15 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (3 ms) [ok]: XCLAIM with trimming (5 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (1 ms) [ok]: XCLAIM with trimming (8 ms) [ok]: XINFO FULL output (14 ms) [ok]: Connect a replica to the master instance (967 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: XADD with MAXLEN option and the '~' argument (396 ms) [ok]: XADD with NOMKSTREAM option (6 ms) [ok]: Consumer seen-time and active-time (204 ms) [ok]: HGETEX PXAT keyspace notifications for active expiry (1170 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (16 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: Client can visit expired key in import-source state (500 ms) [ok]: Negative ttl will not cause server to crash when import mode is on (120 ms) [36/144 done]: unit/wait (47 seconds) Testing unit/type/incr [ok]: INCR against non existing key (38 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: INCR over 32bit value (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: XREADGROUP with NOACK creates consumer (275 ms) [ok]: XADD with MINID option (639 ms) [ok]: XTRIM with MINID option (21 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: GEOSEARCH fuzzy test - byradius (52401 ms) [ok]: INCRBYFLOAT over 32bit value (139 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: No negative zero (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (1 ms) [ok]: incr operation should update encoding from raw to int (0 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: incrby operation should update encoding from raw to int (0 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (218 ms) [37/144 done]: unit/type/incr (1 seconds) Testing unit/type/list-3 [ok]: Active expiration triggers hashtable shrink (287 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (29 ms) [ok]: Consumer group lag with XDELs (32 ms) [ok]: Consumer group lag with XTRIM (29 ms) [ok]: Consumer group lag with XADD trimming (14 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (10 ms) [ok]: Explicit regression for a list bug (7 ms) [ok]: HGETEX keyspace notification when key deleted with active expiry (1063 ms) [ok]: Regression for quicklist #3343 bug (149 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (4 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Check compression with recompress (216 ms) [ok]: Script block the time in some expiration related commands (153 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: Script - disallow write on OOM (2 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: Crash due to wrongly recompress after lrem (298 ms) [ok]: EVAL - Return table with a metatable that call server (3 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (93 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (96 ms) [ok]: HSETEX EX single field expires leaving other fields intact (1020 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (406 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (26 ms) [ok]: EVAL - Test table unpack with invalid indexes (1 ms) [ok]: Try trick readonly table on basic types metatable (1 ms) [ok]: Dynamic reset of lua engine with insecure API config change (60 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (1102 ms) [ok]: SCRIPTING FLUSH ASYNC (224 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SCRIPT SHOW - is able to dump scripts from the scripting cache (0 ms) [ok]: SCRIPT SHOW - wrong sha1 length or invalid sha1 char return noscript error (1 ms) [ok]: SCRIPT SHOW - script not exist return noscript error (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Hash fuzzing #1 - 512 fields (6611 ms) [ok]: HSETEX EX multiple fields expire leaving non-expired fields intact (1134 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (1238 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (979 ms) [38/144 done]: unit/expire (21 seconds) Testing unit/type/list-2 [ok]: HSETEX EX hash key deleted when all fields expire (1009 ms) [ok]: HSETEX EX after HSETEX EX (1 ms) [ok]: {standalone} SCAN regression test for issue #4906 (22328 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (41 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (1209 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (2 ms) [ok]: XREADGROUP ACK would propagate entries-read (2 ms) [ok]: Measures elapsed time os.clock() (2786 ms) [ok]: Prohibit dangerous lua methods in sandbox (18 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (2 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: HSETEX PX single field expires leaving other fields intact (1127 ms) [ok]: Test check paused info during the cluster failover in info clients (216 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (91 ms) [ok]: Very big payload random access (9037 ms) [39/144 done]: unit/type/stream-cgroups (10 seconds) Testing unit/type/list [ok]: packed node check compression with insert and pop (2 ms) [ok]: packed node check compression combined with trim (0 ms) [ok]: packed node check compression with lset (1 ms) [40/144 done]: unit/pause (17 seconds) Testing unit/cluster/announce-client-ports [ok]: EVAL does not leak in the Lua stack (1112 ms) [ok]: plain node check compression with insert and pop (548 ms) [ok]: HSETEX PX multiple fields expire leaving non-expired fields intact (1141 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (141 ms) [ok]: plain node check compression combined with trim (220 ms) [ok]: {cluster} SCAN basic (91 ms) [ok]: MGET: mget shouldn't be propagated in Lua (208 ms) [ok]: plain node check compression with lset (209 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (132 ms) [ok]: {cluster} SCAN COUNT (276 ms) [ok]: {cluster} SCAN MATCH (87 ms) [ok]: {cluster} SCAN TYPE (247 ms) [ok]: Test LPUSH and LPOP on plain nodes (115 ms) [ok]: Test LINDEX and LINSERT on plain nodes (8 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (12 ms) [ok]: Test LMOVE on plain nodes (7 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (561 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Hash fuzzing #2 - 512 fields (4740 ms) [ok]: Number conversion precision test (issue #1118) (10 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (12 ms) [ok]: {cluster} SCAN unknown type (158 ms) [ok]: HSETEX PX hash key deleted when all fields expire (1075 ms) [ok]: HSETEX PX after HSETEX PX (0 ms) [ok]: Test LSET with packed / plain combinations (211 ms) [ok]: Test LSET with packed is split in the middle (15 ms) [ok]: {cluster} SCAN with expired keys (225 ms) [ok]: Test LSET with packed consist only one item (305 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (197 ms) [ok]: Crash due to split quicklist node wrongly (7 ms) [ok]: {cluster} SSCAN with encoding intset (3 ms) [ok]: {cluster} SSCAN with encoding listpack (1 ms) [ok]: {cluster} SSCAN with encoding hashtable (2 ms) [ok]: {cluster} HSCAN with encoding listpack (1 ms) [ok]: Script return recursive object (581 ms) [ok]: Test LPUSH and LPOP on plain nodes (122 ms) [ok]: Test LINDEX and LINSERT on plain nodes (0 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (0 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: Script check unpack with massive arguments (59 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: {cluster} HSCAN with encoding hashtable (137 ms) [ok]: {cluster} ZSCAN with encoding listpack (1 ms) [ok]: Script ACL check (7 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (2 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: HSETEX EXAT single field expires leaving other fields intact (589 ms) [ignore]: large memory flag not provided [ok]: {cluster} ZSCAN with encoding skiplist (182 ms) [ok]: XADD mass insertion and XLEN (7768 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (4 ms) [ok]: {cluster} SCAN guarantees check under write load (54 ms) [ok]: Test LSET with packed / plain combinations (275 ms) [ok]: Test LSET with packed is split in the middle (0 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (3 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (1 ms) [ok]: {cluster} HSCAN with NOVALUES (0 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: {cluster} ZSCAN with NOSCORES (1 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (198 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (445 ms) [ok]: Test LSET with packed consist only one item (408 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (3 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (166 ms) [ok]: HSETEX EXAT multiple fields expire leaving non-expired fields intact (715 ms) [ok]: Timedout script does not cause a false dead client (140 ms) [ok]: LPOS basic usage - quicklist (47 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (4 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (5 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (2 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: Timedout script link is still usable after Lua returns (275 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (3985 ms) [ok]: DBSIZE should be 10000 now (5 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (263 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: memoryusage of string (16 ms) [ok]: SETNX target key missing (9 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (54 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (0 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (55 ms) [ok]: XRANGE can be used to iterate the whole stream (1362 ms) [ok]: BLPOP: multiple existing lists - quicklist (110 ms) [ok]: BLPOP: second list has an entry - quicklist (59 ms) [ok]: HSETEX EXAT hash key deleted when all fields expire (948 ms) [ok]: HSETEX EXAT after HSETEX EXAT (1 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (57 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (243 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (60 ms) [ok]: BRPOPLPUSH - quicklist (60 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: BLMOVE left right - quicklist (135 ms) [ok]: BLMOVE right left - quicklist (50 ms) [ok]: BLMOVE right right - quicklist (55 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (0 ms) [ok]: BLMOVE left left - listpack (4 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (0 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (10 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (0 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (9 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (4 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (6 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (119 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (2 ms) [ok]: Timedout scripts and unblocked command (1388 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (33 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (52 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (104 ms) [ok]: HSETEX PXAT single field expires leaving other fields intact (1062 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (24 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (3 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (215 ms) [ok]: Linked LMOVEs (22 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (7 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: HSETEX PXAT multiple fields expire leaving non-expired fields intact (1059 ms) [ok]: BRPOPLPUSH timeout (1066 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (209 ms) [ok]: Connect a replica to the master instance (1123 ms) [ok]: Now use EVALSHA against the master, with both SHAs (11 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (347 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (5291 ms) [ok]: Hash ziplist of various encodings (105 ms) [ok]: Hash ziplist of various encodings - sanitize dump (7 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [41/145 done]: unit/type/hash (21 seconds) Testing unit/cluster/cluster-migrateslots [ok]: HSETEX PXAT hash key deleted when all fields expire (1328 ms) [ok]: HSETEX PXAT after HSETEX PXAT (0 ms) [ok]: ZDIFF fuzzing - listpack (21894 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (4 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (22 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (1 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-element pair - skiplist (1 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: HPERSIST cancels HSETEX expiry preventing field deletion (205 ms) [ok]: ZCARD basics - skiplist (96 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (18 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (2 ms) [ok]: ZINCRBY return value - skiplist (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (6 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (3 ms) [ok]: ZLEXCOUNT advanced - skiplist (2 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (10 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (28 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (9 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (26 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (2 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (1 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (9 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (2 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (4 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (11 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1113 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (5 ms) [ok]: BLMPOP_LEFT when new key is moved into place (0 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (0 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (0 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: HSETEX overwrites existing field expiry with new shorter expiry (214 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (24 ms) [ok]: BLPOP: second argument is not a list (86 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (12526 ms) [ok]: Connect a replica to the master instance (899 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: HSETEX EX - keyspace notifications fired on field expiry (1058 ms) [ok]: BLPOP: timeout (1015 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (33 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: SETNX against expired volatile key (6074 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (2 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: GETDEL propagate as DEL command to replica (114 ms) [ok]: BRPOP: timeout (1008 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (2 ms) [ok]: HSETEX PX - keyspace notifications fired on field expiry (1119 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_LEFT: second argument is not a list (3 ms) [ok]: GETEX without argument does not propagate to replica (200 ms) [ok]: MGET (0 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (86 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (0 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (0 ms) [ok]: Test scripting debug lua server invocations (1 ms) [ok]: SDIFF fuzzing (23204 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: XREVRANGE returns the reverse of XRANGE (7042 ms) [ok]: SDIFFSTORE should handle non existing key as empty (7 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (7 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: XRANGE exclusive ranges (14 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (1 ms) [ok]: SPOP with =1 - listpack (7 ms) [ok]: SRANDMEMBER - listpack (48 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: HSETEX EXAT - keyspace notifications fired on field expiry (981 ms) [ok]: SRANDMEMBER - intset (108 ms) [ok]: BLMPOP_LEFT: timeout (1022 ms) [ok]: SPOP integer from listpack set (3 ms) [ok]: SPOP with - listpack (1 ms) [ok]: BLMPOP_LEFT: arguments are empty (8 ms) [ok]: SPOP with - intset (16 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: SPOP with - hashtable (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (3 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: SPOP new implementation: code path #1 intset (9 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: SPOP new implementation: code path #2 intset (20 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SPOP new implementation: code path #3 intset (64 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (182 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (8 ms) [ok]: SRANDMEMBER count overflow (12 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (143 ms) [ok]: SRANDMEMBER with - intset (34 ms) [ok]: Lua scripts eviction does not generate many scripts (478 ms) [ok]: SRANDMEMBER with - hashtable (43 ms) [ok]: SRANDMEMBER histogram distribution - listpack (157 ms) [ok]: Lua scripts eviction is plain LRU (328 ms) [ok]: SRANDMEMBER histogram distribution - intset (233 ms) [ok]: BLMPOP_RIGHT: timeout (1081 ms) [ok]: BLMPOP_RIGHT: arguments are empty (4 ms) [ok]: HSETEX PXAT - keyspace notifications fired on field expiry (1189 ms) [ok]: SETBIT fuzzing (2044 ms) [ok]: GETBIT against non-existing key (10 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (2 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: BLPOP inside a transaction (68 ms) [ok]: BLMPOP_LEFT inside a transaction (11 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (19763 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (341 ms) [ok]: SMOVE basics - from regular set to intset (6 ms) [ok]: SMOVE basics - from intset to regular set (10 ms) [ok]: SMOVE non existing key (0 ms) [ok]: SMOVE non existing src set (14 ms) [ok]: SMOVE from regular set to non existing destination set (0 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (9 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: HSETEX - keyspace notifications include del event when hash key removed (235 ms) [ok]: BLMPOP propagate as pop with count command to replica (219 ms) [ok]: LPUSHX, RPUSHX - generic (0 ms) [ok]: Lua scripts eviction does not affect script load (614 ms) [ok]: LPUSHX, RPUSHX - quicklist (128 ms) [ok]: Active expiry deletes entire key when only field expires (210 ms) [ok]: Active expiry removes only expired field while preserving others (106 ms) [ok]: LINSERT - quicklist (42 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (229 ms) [ok]: Lua scripts promoted from eval to script load (461 ms) [ok]: LINDEX random access - listpack (223 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (3 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (11 ms) [ok]: test RESP2/2 false protocol parsing (51 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (410 ms) [ok]: test RESP3/2 map protocol parsing (81 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: Set cluster announced client (TLS) port and check that it propagates (490 ms) [ok]: TIME command using cached time (54 ms) [ok]: Script block the time in some expiration related commands (110 ms) [ok]: RESTORE expired keys with expiration time (42 ms) [ok]: LINDEX consistency test - listpack (357 ms) [ok]: Clear announced client (TLS) port and check that it propagates (372 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: LINDEX random access - listpack (556 ms) [42/145 done]: unit/cluster/announce-client-ports (14 seconds) Testing unit/cluster/faildet [ok]: no-writes shebang flag on replica (1020 ms) [ok]: not enough good replicas (4 ms) [ok]: Active expiry reclaims memory correctly with large hash containing many fields (3056 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (1715 ms) [ok]: LTRIM stress testing - quicklist (17761 ms) [ok]: LINDEX consistency test - quicklist (345 ms) [ok]: LINDEX random access - quicklist (126 ms) [ok]: XREAD with non empty second stream (5775 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: GETRANGE fuzzing (4422 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (3 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: SET with IFEQ conditional (0 ms) [ok]: SET with IFEQ conditional - non-string current value (0 ms) [ok]: SET with IFEQ conditional - with get (1 ms) [ok]: SET with IFEQ conditional - non string current value with get (0 ms) [ok]: SET with IFEQ conditional - with xx (0 ms) [ok]: SET with IFEQ conditional - with nx (0 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Blocking XREAD will not reply with an empty array (56 ms) [ok]: SET EXAT / PXAT Expiration time is expired (86 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (104 ms) [ok]: LCS len (4 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: DELIFEQ non-existing key (0 ms) [ok]: DELIFEQ existing key, matching value (0 ms) [ok]: DELIFEQ existing key, non-matching value (0 ms) [ok]: DELIFEQ existing key, non-string value (0 ms) [ok]: XREAD last element from non-empty stream (41 ms) [ok]: XREAD last element from empty stream (1 ms) [ok]: XREAD last element blocking from empty stream (0 ms) [ok]: XREAD last element blocking from non-empty stream (0 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: DELIFEQ propagate as DEL command to replica (88 ms) [ok]: XREAD last element with count > 1 (47 ms) [ok]: XREAD: XADD + DEL should not awake client (16 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (8 ms) [ok]: Active expiry handles fields with different TTL values correctly (1155 ms) [ok]: XREAD + multiple XADD inside transaction (65 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (375 ms) [43/145 done]: unit/type/string (27 seconds) Testing unit/cluster/cluster-slots [ok]: XDEL basic test (63 ms) [ok]: XDEL multiply id test (1 ms) [ok]: Active expiry removes only specified fields leaving others intact (104 ms) [ok]: Field TTL is removed when field value is overwritten with HSET (96 ms) [ok]: not enough good replicas state change during long script (1967 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (15 ms) [ok]: Field TTL is cleared when field is deleted and recreated (222 ms) [ok]: LINDEX consistency test - quicklist (577 ms) [ok]: Consistent eval error reporting (35 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA redis.error_reply API sanitation (0 ms) [ok]: LUA error function API sanitation (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (1 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: EVAL - Scripts support NULL byte (0 ms) [ok]: EVAL - explicit error() call handling (1 ms) [ok]: LINDEX random access - quicklist (412 ms) [44/145 done]: unit/scripting (68 seconds) Testing unit/cluster/packet [ok]: HEXPIRE active expiry on single field (1142 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (578 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (15 ms) [ok]: RPUSH against non-list value error (1 ms) [ok]: RPOPLPUSH base case - quicklist (80 ms) [ok]: LMOVE left left base case - quicklist (50 ms) [ok]: LMOVE left right base case - quicklist (71 ms) [ok]: LMOVE right left base case - quicklist (147 ms) [ok]: LMOVE right right base case - quicklist (64 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (60 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (85 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (313 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (100 ms) [ok]: HEXPIRE active expiry with multiple fields (1179 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (186 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (180 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (115 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (126 ms) [ok]: Packet with missing gossip messages don't cause invalid read (9 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (48 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (72 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (11858 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (100 ms) [45/145 done]: unit/cluster/packet (2 seconds) Testing unit/cluster/slot-migration-response [ok]: LMOVE right left with quicklist source and existing target listpack (82 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (57 ms) [ok]: HEXPIRE active expiry removes entire key when last field expires (1028 ms) [ok]: RPOPLPUSH base case - listpack (82 ms) [ok]: LMOVE left left base case - listpack (0 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (0 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (53 ms) [ok]: {cluster} SCAN regression test for issue #4906 (18191 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (22 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (135 ms) [ok]: General command interface (55 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (56 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (56 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (0 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (72 ms) [ok]: RPOPLPUSH against non list dst key - listpack (0 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [46/145 done]: unit/scan (47 seconds) Testing unit/cluster/hostnames [ok]: CLUSTER MIGRATESLOTS already migrating (447 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (287 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (152 ms) [ok]: CLUSTER GETSLOTMIGRATIONS command config enforced (223 ms) [ok]: intsets implementation stress testing (9392 ms) [ok]: Mass RPOP/LPOP - listpack (270 ms) [ok]: LMPOP with illegal argument (1 ms) [47/146 done]: unit/type/set (37 seconds) Testing unit/cluster/cli [ok]: LMPOP single existing list - quicklist (141 ms) [ok]: HEXPIRE active expiry with non-existing fields (1506 ms) [ok]: LMPOP multiple existing lists - quicklist (280 ms) [ok]: LMPOP single existing list - listpack (12 ms) [ok]: LMPOP multiple existing lists - listpack (9 ms) [ok]: LMPOP propagate as pop with count command to replica (50 ms) [ok]: LRANGE basics - quicklist (48 ms) [ok]: LRANGE inverted indexes - quicklist (50 ms) [ok]: ZDIFF fuzzing - skiplist (14720 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (0 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (50 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (24 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (6 ms) [ok]: LRANGE out of range negative end index - quicklist (54 ms) [ok]: ZMPOP with illegal argument (4 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (0 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (2 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (10568 ms) [ok]: ZMPOP propagate as pop with count command to replica (286 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (156 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: Cluster is up (56 ms) [ok]: BZMPOP readraw in RESP3 (287 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (5 ms) [ok]: LTRIM basics - quicklist (772 ms) [ok]: HEXPIRE active expiry with mixed existing and non-existing fields (1169 ms) [ok]: LTRIM out of range negative end index - quicklist (121 ms) [ok]: LSET - quicklist (87 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (99 ms) [ok]: LTRIM out of range negative end index - listpack (5 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (357 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: LREM remove all the occurrences - quicklist (46 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (108 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (118 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (0 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (0 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (3 ms) [ok]: BZMPOP readraw in RESP2 (289 ms) [ok]: client unblock tests (29 ms) [ok]: client unblock tests (15 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (3 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: List listpack -> quicklist encoding conversion (46 ms) [ok]: client evicted due to client tracking prefixes (61175 ms) [ok]: client evicted due to output buf (16 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (1401 ms) [ok]: ZUNIONSTORE result is sorted (218 ms) [ok]: List listpack -> quicklist encoding conversion (218 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (10 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (8 ms) [ok]: ZMSCORE retrieve single member (3 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: client no-evict on (206 ms) [ok]: client no-evict off (164 ms) [ok]: ZSCORE - listpack (281 ms) [ok]: Create 1 node cluster (1847 ms) [ok]: ZMSCORE - listpack (45 ms) [ok]: List quicklist -> listpack encoding conversion (371 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (82 ms) [ok]: List encoding conversion when RDB loading (58 ms) [ok]: List invalid list-max-listpack-size config (68 ms) [ok]: CLUSTER GETSLOTMIGRATIONS command reported fields (3330 ms) [ok]: List of various encodings (197 ms) [ok]: List of various encodings - sanitize dump (10 ms) [ok]: Unblock fairness is kept while pipelining (4 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: CLUSTER GETSLOTMIGRATIONS command log removed over max len (155 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (96 ms) [ok]: avoid client eviction when client is freed by output buffer limit (408 ms) [ok]: ZSET sorting stresser - listpack (450 ms) [ok]: XDEL fuzz test (8376 ms) [ok]: Manual and atomic slot migration are mutually exclusive (345 ms) [ok]: HEXPIRE active expiry with already expired fields (2145 ms) [ok]: Test CLUSTER CANCELSLOTMIGRATIONS (389 ms) [ok]: Create 2 node cluster (1206 ms) [ok]: Blocking timeout following PAUSE should honor the timeout (1051 ms) [ok]: CLIENT NO-TOUCH with BRPOP and RPUSH regression test (1 ms) [48/146 done]: unit/type/list (27 seconds) Testing unit/cluster/slave-selection [ok]: HPEXPIRE active expiry on single field (1131 ms) [ok]: decrease maxmemory-clients causes client eviction (1161 ms) [ok]: Slot migration won't migrate the functions (1034 ms) [ok]: evict clients only until below limit (704 ms) [ok]: HPEXPIRE active expiry with multiple fields (1166 ms) [ok]: Single source import - one shot (1378 ms) [ok]: Set many keys in the cluster (4943 ms) [ok]: Test cluster responses during migration of slot x (4 ms) [49/146 done]: unit/cluster/slot-migration-response (8 seconds) Testing unit/cluster/manual-takeover [ok]: HPEXPIRE active expiry removes entire key when last field expires (1075 ms) [ok]: Create 3 node cluster (1967 ms) [ok]: Run blocking command on cluster node3 (7 ms) [ok]: evict clients in right order (large to small) (1387 ms) [ok]: Cluster should start ok (426 ms) [ok]: Killing two slave nodes (16 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (5033 ms) [ok]: Perform a Resharding (431 ms) [ok]: Verify command got unblocked after resharding (20 ms) [ok]: Cluster should be still up (442 ms) [ok]: Killing one master node (16 ms) [ok]: client total memory grows during client no-evict (165 ms) [ok]: client total memory grows during maxmemory-clients disabled (291 ms) [ok]: Wait for cluster to be stable (509 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (0 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [50/146 done]: unit/client-eviction (88 seconds) Testing unit/cluster/slave-stop-cond [ok]: Cluster should be down now (475 ms) [ok]: Restarting master node (16 ms) [ok]: Cluster should be up again (102 ms) [ok]: HPEXPIRE active expiry with non-existing fields (1676 ms) [ok]: Fuzzing dense/sparse encoding: Server should always detect errors (78798 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (12 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (3 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: HPEXPIRE active expiry with mixed existing and non-existing fields (1095 ms) [ok]: Kill a cluster node and wait for fail state (1630 ms) [ok]: Verify command got unblocked after cluster failure (31 ms) [ok]: Slot migration DBSIZE after migration (4378 ms) [51/146 done]: unit/cluster/faildet (18 seconds) Testing unit/cluster/replica-migration [ok]: HPEXPIRE active expiry with already expired fields (2179 ms) [ok]: HEXPIREAT active expiry on single field (102 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (4686 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (13646 ms) [ok]: Single source import - two phase (1758 ms) [ok]: HEXPIREAT active expiry with multiple fields (1043 ms) [ok]: Slot migration seen in client flags (948 ms) [ok]: Set cluster hostnames and verify they are propagated (826 ms) [ok]: Update hostnames and make sure they are all eventually propagated (486 ms) [ok]: HEXPIREAT active expiry removes entire key when last field expires (1080 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (465 ms) [ok]: PFMERGE results with simd (5196 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (584 ms) [ok]: Functions are added to new node on valkey-cli cluster add-node (3341 ms) [ok]: HEXPIREAT active expiry with non-existing fields (1529 ms) [ok]: Import with hz set to 1 (2521 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (1193 ms) [ok]: HEXPIREAT active expiry with mixed existing and non-existing fields (329 ms) [ok]: Test restart will keep hostname information (683 ms) [ok]: Test hostname validation (1 ms) [ok]: Single source import - Incremental Command Coverage (1360 ms) [52/146 done]: unit/cluster/hostnames (18 seconds) Testing unit/cluster/transactions-on-replica [ok]: Importing key containment (slot 0 from node 0 to 2) - start migration (554 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - DBSIZE command excludes importing keys (1 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - KEYS command excludes importing keys (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - SCAN command excludes importing keys (1 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (9 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - DBSIZE command excludes importing keys (1 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - KEYS command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - SCAN command excludes importing keys (1 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) [ok]: HEXPIREAT active expiry with already expired fields (2018 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (14896 ms) [ok]: GEOSEARCH fuzzy test - bybox (45408 ms) [ok]: GEOSEARCH box edges fuzzy test (37 ms) [53/146 done]: unit/geo (98 seconds) Testing unit/cluster/update-msg [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (685 ms) [ok]: HPEXPIREAT active expiry on single field (1185 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-random eviction excludes importing keys (1607 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (793 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (44 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-lru eviction excludes importing keys (640 ms) [ok]: HPEXPIREAT active expiry with multiple fields (1115 ms) [ok]: Cluster is up (430 ms) [ok]: Cluster is writable (426 ms) [ok]: HPEXPIREAT active expiry removes entire key when last field expires (1152 ms) [ok]: Killing majority of master nodes (286 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (2047 ms) [ok]: Cluster is up (494 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (9679 ms) [ok]: XRANGE fuzzing (18260 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (21 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (3 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: XREVRANGE regression test for issue #5006 (2 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: The first master has actually two slaves (6 ms) [ok]: XREAD streamID edge (blocking) (3 ms) [ok]: CLUSTER SLAVES and CLUSTER REPLICAS output is consistent (2 ms) [ok]: XADD streamID edge (0 ms) [ok]: Slaves of #0 are instance #5 and #10 as expected (1 ms) [ok]: Instance #5 and #10 synced with the master (2 ms) [ok]: XTRIM with MAXLEN option basic test (118 ms) [ok]: XADD with LIMIT consecutive calls (5 ms) [ok]: XTRIM with ~ is limited (11 ms) [ok]: XTRIM without ~ is not limited (12 ms) [ok]: XTRIM without ~ and with LIMIT (17 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-lfu eviction excludes importing keys (2092 ms) [ok]: Slaves are both able to receive and acknowledge writes (486 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (205 ms) Time: 1054 [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1056 ms) [ok]: BZPOPMIN with same key multiple times should work (106 ms) [ok]: HPEXPIREAT active expiry with non-existing fields (1551 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (7 ms) [ok]: BZPOPMIN with variadic ZADD (8 ms) [ok]: XADD with MINID > lastid can propagate correctly (33 ms) [ok]: Cluster is up (437 ms) [ok]: The first master has actually one slave (3 ms) [ok]: Slaves of #0 is instance #5 as expected (62 ms) [ok]: Instance #5 synced with the master (1 ms) [ok]: Lower the slave validity factor of #5 to the value of 2 (3 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-random eviction excludes importing keys (1511 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (14 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (22 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1108 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (11 ms) [ok]: BZMPOP_MIN with variadic ZADD (6 ms) [ok]: HPEXPIREAT active expiry with mixed existing and non-existing fields (1173 ms) [ok]: XADD with ~ MINID can propagate correctly (39 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-lru eviction excludes importing keys (1189 ms) [ok]: Cluster should eventually be down (3280 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (42 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: ZSCORE - skiplist (31 ms) [ok]: Use takeover to bring slaves back (258 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (37 ms) [ok]: ZMSCORE - skiplist (98 ms) [ok]: LTRIM stress testing - listpack (30948 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (133 ms) [ok]: ZSET sorting stresser - skiplist (20 ms) [54/146 done]: unit/type/list-2 (49 seconds) Testing unit/cluster/consistency-check [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negative offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (0 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (1 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: HPEXPIREAT active expiry with already expired fields (2229 ms) [ok]: Empty stream can be rewrite into AOF correctly (179 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-lfu eviction excludes importing keys (1970 ms) [ok]: ziplist implementation: value encoding and backlink (14794 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (534 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (8 ms) [55/146 done]: unit/type/stream (57 seconds) Testing unit/cluster/auto-failover-on-shutdown [ok]: CLIENT PAUSE WRITE blocks hash field active expiry until pause ends (1247 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (5985 ms) [ok]: Cluster should eventually be up again (2951 ms) [ok]: Cluster is writable (223 ms) [ok]: Instance #5, #6, #7 are now masters (40 ms) [ok]: Restarting the previously killed master nodes (9 ms) [ok]: Instance #0, #1, #2 gets converted into a slaves (513 ms) [ok]: Migrate the last slot away from a node using valkey-cli (13260 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (4057 ms) [ok]: Cluster should start ok (34 ms) [ok]: Can't read from replica without READONLY (1 ms) [ok]: Can't read from replica after READWRITE (0 ms) [ok]: Can read from replica after READONLY (0 ms) [ok]: Can perform HSET primary and HGET from replica (51 ms) [ok]: Can MULTI-EXEC transaction of HGET operations from replica (48 ms) [ok]: MULTI-EXEC with write operations is MOVED (1 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-ttl eviction excludes importing keys (3042 ms) [ok]: HEXPIRE active expiry works correctly after RENAME operation (2309 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (1270 ms) [56/146 done]: unit/cluster/manual-takeover (24 seconds) Testing unit/cluster/failover [ok]: Primary importing key containment (slot 0 from node 0 to 2) - active expiration excludes importing keys (1300 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (993 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (57 ms) [ok]: write command is QUEUED, then EXEC should be MOVED after failover (2077 ms) [ok]: read-only blocking operations from replica (1 ms) [ok]: reply MOVED when eval from replica for update (1 ms) [ok]: HEXPIRE active expiry works correctly after COPY operation (2108 ms) [ok]: Write data while slave #10 is paused and can't receive it (10042 ms) [57/146 done]: unit/cluster/transactions-on-replica (15 seconds) Testing unit/cluster/noaddr [ok]: Importing key containment (slot 16383 from node 2 to 0) - start migration (829 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - DBSIZE command excludes importing keys (9 ms) [ok]: valkey-cli -4 --cluster create using 127.0.0.1 with cluster-port (2340 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - KEYS command excludes importing keys (1 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - SCAN command excludes importing keys (0 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - DBSIZE command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - KEYS command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - SCAN command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) [ok]: Cluster is up (171 ms) [ok]: Cluster is writable (493 ms) [ok]: Instance #5 is a slave (1 ms) [ok]: Instance #5 synced with the master (0 ms) [ok]: Killing one master node (16 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-random eviction excludes importing keys (1387 ms) [ok]: HEXPIRE active expiry works correctly after RESTORE operation (2570 ms) [ok]: valkey-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (2009 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-lru eviction excludes importing keys (1242 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (3815 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (0 ms) Time: 1041 [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1045 ms) [ok]: BZPOPMIN with same key multiple times should work (61 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: HEXPIRE active expiry works correctly after MOVE operation (2281 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-lfu eviction excludes importing keys (1454 ms) [ok]: Wait for failover (3618 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1062 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Cluster should eventually be up again (559 ms) [ok]: Cluster is writable (525 ms) [ok]: Instance #5 is now a master (15 ms) [ok]: Killing the new master #5 (173 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1047 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-random eviction excludes importing keys (1914 ms) [ok]: BZPOP/BZMPOP against wrong type (19 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (2 ms) [ok]: BZMPOP propagate as pop with count command to replica (223 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (12 ms) [ok]: HPEXPIRE active expiry works correctly after RENAME operation (2247 ms) [ok]: Wait for instance #5 (and not #10) to turn into a master (6930 ms) [ok]: valkey-cli -4 --cluster create using localhost with cluster-port (2141 ms) [ok]: Wait for the node #10 to return alive before ending the test (281 ms) [ok]: Cluster should eventually be up again (493 ms) [ok]: Node #10 should eventually replicate node #5 (30 ms) [ok]: Cluster should start ok (278 ms) [ok]: valkey-cli -4 --cluster add-node using localhost with cluster-port (1598 ms) [ok]: Cluster is writable (380 ms) [ok]: HPEXPIRE active expiry works correctly after COPY operation (2183 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-lru eviction excludes importing keys (2571 ms) [ok]: Cluster should be down now (3485 ms) [ok]: Restarting the old master node (0 ms) [ok]: Instance #0 gets converted into a slave (94 ms) [ok]: Restarting the new master node (2 ms) [ok]: Cluster is up again (812 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-lfu eviction excludes importing keys (1973 ms) [ok]: HPEXPIRE active expiry works correctly after RESTORE operation (2150 ms) [ok]: Break master-slave link and prevent further reconnections (20048 ms) [ok]: Slave #5 is reachable and alive (0 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - shutdown - shutdown-timeout: 0 (2081 ms) [ok]: Unable to find a replica to perform an auto failover - shutdown (57 ms) [ok]: Create 3 node cluster (1981 ms) [ok]: Multi-database fill slot 0 (382 ms) [ok]: Slave expired keys is loaded when restarted: appendonly=no (3564 ms) [ok]: Perform a Multi-database Resharding (502 ms) [58/146 done]: unit/cluster/update-msg (27 seconds) Testing unit/cluster/announce-client-ip [ok]: Verify multi-database slot migrate (168 ms) [ok]: Cluster is up (358 ms) [ok]: HPEXPIRE active expiry works correctly after MOVE operation (2269 ms) [59/146 done]: unit/cluster/cli (45 seconds) Testing unit/cluster/divergent-cluster-shardid-conf [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-ttl eviction excludes importing keys (2579 ms) [ok]: Cluster is writable (528 ms) [ok]: Instance #5 is a slave (10 ms) [ok]: Instance #5 synced with the master (5 ms) [ok]: Killing one master node (54 ms) [ok]: ZSET skiplist order consistency when elements are moved (7171 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (24 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (20 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (59 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (9 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (60 ms) [ok]: ZRANDMEMBER - skiplist (95 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: NOADDR nodes will be marked as FAIL (778 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (1 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (5 ms) [ok]: HEXPIREAT active expiry works correctly after RENAME operation (1241 ms) [ok]: divergent cluster shardid conflict (1365 ms) [60/146 done]: unit/cluster/divergent-cluster-shardid-conf (2 seconds) Testing unit/cluster/multi-slot-operations [61/146 done]: unit/cluster/noaddr (15 seconds) Testing unit/cluster/slot-ownership [ok]: Migrated replica reports zero repl offset and rank, and fails to win election - shutdown (23285 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - active expiration excludes importing keys (1819 ms) [ok]: ZRANDMEMBER with - skiplist (1610 ms) [ok]: Slave expired keys is loaded when restarted: appendonly=yes (3733 ms) [ok]: HEXPIREAT active expiry works correctly after COPY operation (2110 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (35107 ms) [ok]: ZRANDMEMBER with - listpack (1741 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (60 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (18 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (9 ms) [ok]: Wait for failover (3742 ms) [62/146 done]: unit/type/zset (87 seconds) Testing unit/cluster/no-failover-option [ok]: Cluster should eventually be up again (431 ms) [ok]: Simultaneous imports (2605 ms) [ok]: Continuous slots distribution (174 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (13 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (74 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (12 ms) [ok]: HEXPIREAT active expiry works correctly after RESTORE operation (1813 ms) [ok]: Cluster is writable (610 ms) [ok]: Instance #5 is now a master (1 ms) [ok]: Restarting the previously killed master node (0 ms) [ok]: Instance #0 gets converted into a slave (326 ms) [63/146 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/cluster-reliable-meet [64/146 done]: unit/cluster/consistency-check (26 seconds) Testing unit/cluster/cluster-shards [ok]: Cluster nodes are reachable (0 ms) [ok]: Before slots allocation, all nodes report cluster failure (72 ms) [ok]: Cluster nodes haven't met each other (5 ms) [ok]: Allocate slots (204 ms) [ok]: Simultaneous exports (2060 ms) [ok]: HEXPIREAT active expiry works correctly after MOVE operation (2062 ms) [ok]: Slave #5 should not be able to failover (10082 ms) [ok]: Cluster should be down (499 ms) [ok]: Multiple slot ranges from same source (2067 ms) [ok]: MEET is reliable when target drops the initial MEETs (3010 ms) [ok]: HPEXPIREAT active expiry works correctly after RENAME operation (2447 ms) [65/146 done]: unit/cluster/slave-stop-cond (48 seconds) Testing unit/cluster/pubsubshard-slot-migration [ok]: Import slot range with multiple slots (1490 ms) [ok]: Set cluster announced IPv4 to invalid IP (0 ms) [ok]: Import multiple slot ranges with multiple slots (1380 ms) [ok]: Set cluster announced IPv4 and check that it propagates (354 ms) [ok]: HPEXPIREAT active expiry works correctly after COPY operation (2414 ms) [ok]: Clear announced client IPv4 and check that it propagates (271 ms) [ok]: Export all slots from node (987 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (31357 ms) [ok]: Import slots to node with no slots (669 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - sigterm - shutdown-timeout: 0 (1873 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (440 ms) [ok]: Unable to find a replica to perform an auto failover - sigterm (179 ms) [ok]: HPEXPIREAT active expiry works correctly after RESTORE operation (2156 ms) [ok]: Partial data removed on cancel (984 ms) [ok]: OOM on target aborts migration (873 ms) [ok]: Partial data in replica removed on failover (1284 ms) [ok]: HPEXPIREAT active expiry works correctly after MOVE operation (2253 ms) [ok]: Cluster is up (843 ms) [ok]: The first master has actually 5 slaves (1 ms) [ok]: Slaves of #0 are instance #3, #6, #9, #12 and #15 as expected (55 ms) [ok]: Instance #3, #6, #9, #12 and #15 synced with the master (14 ms) [ok]: Cluster is up (108 ms) [ok]: Instance #3 is a replica (8 ms) [ok]: Instance #3 synced with the master (0 ms) [ok]: Slot export failed on failover (872 ms) [ok]: The nofailover flag is propagated (206 ms) [ok]: Killing one master node (58 ms) [ok]: HEXPIRE active expiry processes multiple hash keys with different field counts (1037 ms) [ok]: HPEXPIRE active expiry processes multiple hash keys with different field counts (1061 ms) [ok]: Slots split across shards during import (1197 ms) [ok]: Cluster should start ok (257 ms) [ok]: Cluster shards response is ok for shard 0 (2 ms) [ok]: Kill a node and tell the replica to immediately takeover (63 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (15281 ms) [ok]: HEXPIREAT active expiry processes multiple hash keys with different field counts (663 ms) [ok]: HPEXPIREAT active expiry processes multiple hash keys with different field counts (1299 ms) [ok]: Cluster should be still down after some time (3665 ms) [ok]: Instance #3 is still a replica (2 ms) [ok]: Restarting the previously killed master node (0 ms) [ok]: Export unpauses itself even if slot failover doesn't occur (2564 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (2517 ms) [ok]: PFADD / PFCOUNT cache invalidation works (12 ms) [66/146 done]: unit/hyperloglog (147 seconds) Testing unit/cluster/links [ok]: HEXPIRE handles mixed short and long expiry times across multiple keys (1223 ms) [ok]: Export unpauses when cancelled (670 ms) [ok]: Cluster is up (296 ms) [ok]: Verify health as fail for killed node (3301 ms) [ok]: CLUSTER SHARDS slot response is non-empty when primary node fails (1 ms) [67/146 done]: unit/cluster/no-failover-option (18 seconds) Testing unit/cluster/shardid-propagation [ok]: Cluster is writable (534 ms) [ok]: Killing the first primary node (165 ms) [ok]: Blocked clients are sent MOVED after export completion (912 ms) [ok]: HPEXPIRE handles mixed short and long expiry times across multiple keys (1048 ms) [ok]: CLUSTER SYNCSLOTS invalid state machine traversal (204 ms) [ok]: Cluster nodes are reachable (0 ms) [ok]: Before slots allocation, all nodes report cluster failure (88 ms) [68/146 done]: unit/cluster/cluster-shards (17 seconds) Testing unit/cluster/scripting [ok]: Cluster nodes haven't met each other (192 ms) [ok]: HEXPIREAT handles mixed short and long expiry times across multiple keys (537 ms) [ok]: Allocate slots (72 ms) [ok]: Cluster is up (194 ms) [ok]: CLUSTER SYNCSLOTS ESTABLISH command interface (516 ms) [ok]: Migrate a slot, verify client receives sunsubscribe on primary serving the slot. (177 ms) [ok]: Client subscribes to multiple channels, migrate a slot, verify client receives sunsubscribe on primary serving the slot. (150 ms) [ok]: ziplist implementation: encoding stress testing (42915 ms) [ok]: Restart of node in cluster mode doesn't cause nodes.conf corruption due to shard id mismatch (744 ms) [69/146 done]: unit/type/list-3 (97 seconds) Testing unit/cluster/slot-migration [ok]: Migrate a slot, verify client receives sunsubscribe on replica serving the slot. (352 ms) [ok]: Move a replica to another primary, verify client receives sunsubscribe on replica serving the slot. (87 ms) [ok]: Delete a slot, verify sunsubscribe message (2 ms) [ok]: Reset cluster, verify sunsubscribe message (47 ms) [ok]: HPEXPIREAT handles mixed short and long expiry times across multiple keys (1056 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (12083 ms) [ok]: HEXPIRE deletes entire keys when all fields expire while preserving partial keys (1086 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (2 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [ok]: Calling cluster slots in scripts is OK (0 ms) [ok]: Calling cluster shards in scripts is OK (0 ms) [ok]: Handshake eventually succeeds after node handshake timeout on both sides with inconsistent view of the cluster (13498 ms) [70/146 done]: unit/cluster/scripting (3 seconds) Testing unit/cluster/slot-stats [ok]: Set cluster announced IPv6 to invalid IP (2 ms) [ok]: FLUSH on target during import (2657 ms) [71/146 done]: unit/cluster/pubsubshard-slot-migration (16 seconds) Testing unit/cluster/half-migrated-slot [ok]: Wait for failover (3748 ms) [ok]: Set cluster announced IPv6 and check that it propagates (466 ms) [ok]: HPEXPIRE deletes entire keys when all fields expire while preserving partial keys (1127 ms) [ok]: Clear announced client IPv6 and check that it propagates (413 ms) [ok]: Cluster should eventually be up again (563 ms) [ok]: Restarting the previously killed primary node (1 ms) [ok]: Instance #0 gets converted into a replica (91 ms) [ok]: Make sure the replicas always get the different ranks (66 ms) [ok]: HEXPIREAT deletes entire keys when all fields expire while preserving partial keys (670 ms) [ok]: HPEXPIREAT deletes entire keys when all fields expire while preserving partial keys (1114 ms) [72/146 done]: unit/cluster/failover (44 seconds) Testing unit/cluster/human-announced-nodename [ok]: Cluster is up (50 ms) [ok]: FLUSH on source during export (3257 ms) [ok]: Half init migration in 'migrating' is fixable (41 ms) [ok]: Half init migration in 'importing' is fixable (69 ms) [ok]: HEXPIRE active expiry reclaims memory efficiently across multiple large hash keys (1190 ms) [ok]: Init migration and move key (426 ms) [ok]: Move key again (5 ms) [ok]: Load cluster announced IPv4 config on server start (275 ms) [ok]: Half-finish migration (598 ms) [ok]: HPEXPIRE active expiry reclaims memory efficiently across multiple large hash keys (1128 ms) [ok]: Move key back (35 ms) [ok]: Half-finish importing (360 ms) [ok]: HEXPIREAT active expiry reclaims memory efficiently across multiple large hash keys (564 ms) [73/146 done]: unit/cluster/half-migrated-slot (5 seconds) Testing unit/cluster/failure-marking [ok]: Set cluster human announced nodename and let it propagate (117 ms) [ok]: Import cancelled when source hangs (3071 ms) [ok]: HPEXPIREAT active expiry reclaims memory efficiently across multiple large hash keys (1212 ms) [ok]: Primary lost a slot during the shutdown waiting (4670 ms) [ok]: Load cluster announced IPv6 config on server start (164 ms) [ok]: HINCRBY recreates field with correct value after active expiry deletion (299 ms) [ok]: HINCRBY preserves existing TTL when incrementing field value (1 ms) [74/146 done]: unit/cluster/announce-client-ip (33 seconds) Testing unit/cluster/cluster-multiple-meets [ok]: HINCRBY handles mix of expired and existing fields during increment operations (227 ms) [ok]: HINCRBY maintains TTL values when incrementing fields with existing expiry (32 ms) [ok]: Cluster nodes are reachable (1 ms) [ok]: Before slots allocation, all nodes report cluster failure (46 ms) [ok]: Cluster nodes haven't met each other (3 ms) [ok]: HINCRBYFLOAT recreates field with correct value after active expiry deletion (325 ms) [ok]: HINCRBYFLOAT preserves existing TTL when incrementing field value (1 ms) [ok]: Allocate slots (202 ms) [ok]: HINCRBYFLOAT handles mix of expired and existing fields during increment operations (267 ms) [ok]: HINCRBYFLOAT maintains TTL values when incrementing fields with existing expiry (0 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (118 ms) [ok]: CLUSTER SLOT-STATS cpu-usec reset upon CONFIG RESETSTAT. (6621 ms) [ok]: HDEL removes both expired and non-expired fields deleting key when empty (1200 ms) [ok]: Migrated replica reports zero repl offset and rank, and fails to win election - sigstop (16501 ms) [ok]: HPERSIST returns -2 when attempting to persist already expired field (113 ms) [ok]: HPEXPIRE works correctly on field after HPERSIST removes its TTL (279 ms) [ok]: Export cancelled when target hangs (3284 ms) [ok]: Human nodenames are visible in log messages (3752 ms) [ok]: Handshake eventually succeeds after node handshake timeout on one side with inconsistent view of the cluster (6862 ms) [75/146 done]: unit/cluster/human-announced-nodename (8 seconds) Testing unit/cluster/sharded-pubsub [ok]: Multiple MEETs from Node 1 to Node 0 should work (3010 ms) [76/146 done]: unit/cluster/cluster-reliable-meet (31 seconds) Testing unit/cluster/cluster-response-tls [77/146 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/shutdown [ok]: Import with AUTH on (1247 ms) [78/146 done]: unit/cluster/cluster-multiple-meets (5 seconds) Testing unit/cluster/base [ok]: Import AUTH with WRONGPASS (284 ms) [ok]: Slot migration states are replicated (25 ms) [ok]: Each node has two links with each peer (52 ms) [ok]: Validate cluster links format (104 ms) [ok]: The replica will have a new shard_id after cluster reset soft (310 ms) [ok]: Connection drop during import causes failure (988 ms) [ok]: Cluster nodes are reachable (4 ms) [ok]: Hash field TTL values and active expiry state preserved during cluster slot migration (681 ms) [79/146 done]: unit/cluster/shardid-propagation (17 seconds) Testing unit/cluster/misc [ok]: Cluster Join and auto-discovery test (1366 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - shutdown - shutdown-timeout: 10 (10209 ms) [ok]: Before slots allocation, all nodes report cluster failure (202 ms) [ok]: Different nodes have different IDs (20 ms) [ok]: Unable to find a replica to perform an auto failover - shutdown (291 ms) [ok]: It is possible to perform slot allocation (303 ms) [ok]: After the join, every node gets a different config epoch (29 ms) [ok]: New Master down consecutively (23761 ms) [ok]: Migration target is auto-updated after failover in target shard (4028 ms) [ok]: Large hash with mixed TTL fields maintains expiry state after cluster slot migration (663 ms) [ok]: Export client buffer enforcement (4875 ms) [ok]: Test shutdown safe is working (3411 ms) [80/146 done]: unit/cluster/shutdown (7 seconds) Testing unit/cluster/replica-detach [81/146 done]: unit/cluster/slave-selection (86 seconds) Testing unit/cluster/info [ok]: Hash field active expiry on primary triggers HDEL replication to replica (1902 ms) [ok]: Migration source is auto-updated after failover in source shard (4684 ms) [ok]: Replica redirects key access in migrating slots (34 ms) [ok]: Slot importing with some non-importing data (3216 ms) [ok]: Replica of migrating node returns ASK redirect after READONLY (8 ms) [ok]: Replica of migrating node returns TRYAGAIN after READONLY (2 ms) [ok]: Replica of importing node returns TRYAGAIN after READONLY and ASKING (9 ms) [ok]: Primary lost a slot during the manual failover pausing (838 ms) [ok]: Cluster should start ok (26 ms) [ok]: errorstats: rejected call due to MOVED Redirection (7 ms) [ok]: Nodes should report cluster_state is ok now (6503 ms) [ok]: Sanity for CLUSTER COUNTKEYSINSLOT (12 ms) [ok]: Verify that single primary marks replica as failed (3287 ms) [ok]: New replica inherits migrating slot (858 ms) [ok]: Hash field TTL and active expiry propagates correctly through chain replication (1620 ms) [ok]: Disconnect link when send buffer limit reached (9819 ms) [ok]: New replica inherits importing slot (830 ms) [ok]: It is possible to write and read from the cluster (1422 ms) [ok]: CLUSTER RESET SOFT test (136 ms) [ok]: Coverage: CLUSTER HELP (0 ms) [ok]: Coverage: ASKING (36 ms) [ok]: CLUSTER SLAVES and CLUSTER REPLICAS with zero replicas (1 ms) [ok]: Sharded pubsub publish behavior within multi/exec (0 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (1 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (2 ms) [ok]: SSUBSCRIBE client killed during transaction (7 ms) [ok]: Hash field TTL values remain intact after replica promotion to primary (1095 ms) [ok]: Link memory increases with publishes (1088 ms) [ok]: Link memory resets after publish messages flush (337 ms) [82/146 done]: unit/cluster/base (12 seconds) Testing unit/cluster/cluster-nodes-slots [83/146 done]: unit/cluster/sharded-pubsub (13 seconds) Testing unit/cluster/diskless-load-swapdb [84/146 done]: unit/cluster/links (28 seconds) Testing unit/cluster/manual-failover [ok]: CLUSTER SLOT-STATS cpu-usec reset upon slot migration. (16253 ms) [ok]: Key lazy expires during key migration (345 ms) [ok]: Coverage: Basic cluster commands (69 ms) [ok]: Hash field TTL values persist correctly during FAILOVER command execution (3222 ms) [ok]: Export client buffer excluded from maxmemory (5912 ms) [ok]: fail reason changed (3693 ms) [ok]: Migration not cancelled when snapshot takes more time than repl-timeout (1060 ms) [ok]: CONFIG RESETSTAT resets cluster related stats (122 ms) [ok]: Multiple expired hash fields are replicated as single HDEL command to replica (1418 ms) [ok]: HDEL replication includes only actually expired fields not non-existent ones (107 ms) [ok]: New non-empty replica reports zero repl offset and rank, and fails to win election - shutdown (4515 ms) [ok]: expired_fields metric increments only on primary not replica during field expiry (1285 ms) [ok]: Cluster should start ok (121 ms) [ok]: CLUSTER REPLICATE NO ONE should turn node into empty primary (479 ms) [ok]: expired_fields metric correctly tracks sequential field expirations in replication (1228 ms) [ok]: count - node partial failure (757 ms) [ok]: HINCRBY is executed on repilca's expired fields (216 ms) [ok]: HINCRBYFLOAT is executed on repilca's expired fields (274 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for non-slot specific commands. (7635 ms) [ok]: HINCRBYFLOAT maintains TTL on repilca's fields (215 ms) [85/146 done]: unit/cluster/replica-detach (15 seconds) Testing unit/cluster/pubsub [ok]: HSETNX set the value for expired replica field (229 ms) [ok]: HMSET reports hexpired when overwrites expired fields (79 ms) [ok]: count - node complete failure (1050 ms) [ok]: HSETEX KEEPTTL replica should preserve ttl when field is not expired on primary (318 ms) [ok]: HSETEX KEEPTTL replica should NOT preserve ttl when field is expired on primary (164 ms) [86/146 done]: unit/cluster/info (15 seconds) Testing unit/cluster/cluster-flush-slot [ok]: Restart target primary during migration (without save) causes failure (6260 ms) [ok]: Primary lost a slot during the client pause command (237 ms) [ok]: Overwriting hash with volatile fields updates keys_with_volatile_items tracking (128 ms) [ok]: RESTORE REPLACE clears keys_with_volatile_items tracking (1 ms) [ok]: Zero is a valid ttl in HFE (128 ms) [87/146 done]: unit/hashexpire (186 seconds) Testing unit/cluster/failover2 [88/146 done]: unit/cluster/slot-ownership (60 seconds) Testing unit/cluster/multidb [ok]: Cluster should start ok (70 ms) [ok]: Cluster is writable (163 ms) [ok]: Cluster should start ok (237 ms) [ok]: Continuous slots distribution (178 ms) [ok]: Discontinuous slots distribution (16 ms) [89/146 done]: unit/cluster/cluster-nodes-slots (14 seconds) Testing unit/cluster/many-slot-migration [ok]: Verify that multiple primaries mark replica as failed (3498 ms) [ok]: Multiple slot migration states are replicated (98 ms) [ok]: Restart target primary during migration (with save) causes failure (5612 ms) [ok]: Cross-slot transaction (1 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - sigterm - shutdown-timeout: 10 (10404 ms) [ok]: Cluster is up (370 ms) [ok]: Unable to find a replica to perform an auto failover - sigterm (109 ms) [ok]: New replica inherits multiple migrating slots (1606 ms) [ok]: Slot finalization succeeds on both primary and replicas (237 ms) [90/146 done]: unit/cluster/misc (26 seconds) Testing unit/cluster/replica-redirect [91/146 done]: unit/cluster/auto-failover-on-shutdown (85 seconds) Testing unit/cluster/announced-endpoints [ok]: Cluster is writable (1060 ms) [ok]: Instance #5 is a slave (10 ms) [ok]: Instance #5 synced with the master (2 ms) W[ok]: CLUSTER SLOT-STATS cpu-usec for slot specific commands. (10472 ms) W[ok]: Cluster is up (343 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (44736 ms) [ok]: Restart source primary during migration (without save) causes failure (6174 ms) [ok]: SYNC Flush slot command (83 ms) [ok]: ASYNC Flush slot command (192 ms) [ok]: Cluster is up (379 ms) [ok]: Key-based commands can be used on multiple databases (10 ms) [ok]: Test publishing to master (32 ms) [ok]: Test publishing to slave (35 ms) W[ok]: Restart source primary during migration (with save) causes failure (4032 ms) [ok]: Cluster is up (376 ms) [ok]: Cluster is writable (250 ms) [ok]: Killing one primary node (13 ms) [ok]: Key-based commands across multiple databases (3063 ms) [ok]: Restart target replica during migration (without save) causes success (2123 ms) [ok]: Test cluster info stats for publish (6 ms) [ok]: Cluster is up (34 ms) [ok]: blocked clients behavior during failover (326 ms) [92/146 done]: unit/cluster/pubsub (19 seconds) Testing unit/cluster/replica-in-sync [93/146 done]: unit/cluster/replica-redirect (13 seconds) Testing unit/cluster/cross-version-cluster [ignore]: Other server path not provided [ok]: New non-empty replica reports zero repl offset and rank, and fails to win election - sigstop (7873 ms) [ignore]: Other server path not provided [94/146 done]: unit/cluster/cross-version-cluster (0 seconds) Testing unit/cluster/pubsubshard W[ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (122 ms) [ok]: Test change cluster-announce-bus-port at runtime (318 ms) [ok]: Test change port and tls-port on runtime (224 ms) [ok]: Restart target replica during migration (with save) causes success (2250 ms) [95/146 done]: unit/cluster/announced-endpoints (14 seconds) Testing integration/psync2 [ok]: Slot is auto-claimed by target after source relinquishes ownership (1012 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (5 ms) [ok]: Validate slot statistics using cluster countkeysinslot and cluster getkeysinslot (5981 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: Wait for failover (6629 ms) W[ok]: Killing the new primary node (450 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: Cluster should eventually be up again (265 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for blocking commands, unblocked on keyspace update. (14401 ms) [ok]: Replication: Write to multiple databases and verify replica (1515 ms) [ok]: Restart source replica during migration (without save) causes success (4388 ms) [ok]: SWAPDB is not supported in cluster mode (502 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (3 ms) [ok]: Flush slot command propagated to replica (379 ms) [ok]: Restart source replica during migration (with save) causes success (2191 ms) [ok]: Cross-DB Expiry Handling (2003 ms) [96/146 done]: unit/cluster/cluster-flush-slot (28 seconds) Testing integration/aof-race [ok]: Only primary with slots has the right to mark a node as failed (21500 ms) W[97/146 done]: integration/aof-race (1 seconds) Testing integration/block-repl [ok]: Cluster is up (70 ms) [ok]: wait for new failover (6360 ms) [ok]: Restarting the previously killed primary nodes (2 ms) [ok]: Make sure there is no failover timeout (1 ms) [ok]: First server should have role slave after SLAVEOF (1018 ms) [ok]: Cluster is writable (590 ms) [ok]: Fill up primary with data (2 ms) [ok]: Add new node as replica (18 ms) [ok]: Check digest and replica state (2 ms) W[ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 7544) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (5 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (10 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for blocking commands, unblocked on timeout. (8003 ms) Waiting for process 4610 to exit... [ok]: Pub/Sub shard basics (227 ms) [ok]: client can't subscribe to multiple shard channels across different slots in same call (2 ms) [ok]: client can subscribe to multiple shard channels across different slots in separate call (0 ms) [ok]: sunsubscribe without specifying any channel would unsubscribe all shard channels subscribed (4 ms) [ok]: Verify Pub/Sub and Pub/Sub shard no overlap (7 ms) [ok]: PUBSUB channels/shardchannels (1 ms) [ok]: Persistence across restart with multiple databases (5898 ms) [ok]: Import with default user having no permission (881 ms) [ok]: Copy key to other database (299 ms) [ok]: CLUSTER RESET should fail if databases contain keys (2 ms) [ok]: Move key to other database (1 ms) [ok]: Flushslot with multiple databases (2 ms) W[98/146 done]: unit/cluster/pubsubshard (15 seconds) Testing integration/failover [99/146 done]: unit/cluster/multidb (32 seconds) Testing integration/corrupt-dump-fuzzer [ok]: failover command fails without connected replica (1 ms) [ok]: setup replication for following tests (1017 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 15881) (93 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: failover command to specific replica works (1365 ms) [ok]: CLUSTER SETSLOT with invalid timeouts (1 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (7 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: failover command to any replica works (880 ms) [ok]: failover to a replica with force works (652 ms) W[ok]: failover with timeout aborts if replica never catches up (600 ms) [ok]: failovers can be aborted (260 ms) [ok]: Replica in loading state is hidden (9416 ms) [ok]: Check disconnected replica not hidden from slots (132 ms) [100/146 done]: unit/cluster/replica-in-sync (23 seconds) Testing integration/skip-rdb-checksum [ok]: failover aborts if target rejects sync request (1289 ms) [ok]: Skip RDB checksum sync - tls:0, repl_diskless_sync:yes, repl_diskless_load:on-empty-db (774 ms) [101/146 done]: integration/skip-rdb-checksum (1 seconds) Testing integration/psync2-reg [ok]: PSYNC2: generate load while killing replication links (5027 ms) W[ok]: PSYNC2: cluster is consistent after load (x = 22830) (42 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (23 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [102/146 done]: integration/failover (9 seconds) Testing integration/replication-3 [ok]: PSYNC2 #3899 regression: setup (1147 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9444 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: First server should have role slave after SLAVEOF (800 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: Primaries do not add failure-report after replica is already marked FAIL (3876 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (8 ms) [103/146 done]: unit/cluster/failure-marking (75 seconds) Testing integration/rdb [ok]: PSYNC2 #3899 regression: kill first replica (18 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for transactions. (15521 ms) [ok]: test old version rdb file (10 ms) [ok]: Send CLUSTER FAILOVER to #5, during load (40512 ms) [ok]: RDB encoding loading test (29 ms) [ok]: PSYNC2: generate load while killing replication links (5016 ms) [ok]: PSYNC2: cluster is consistent after load (x = 30952) (37 ms) [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (10 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: Wait for failover (343 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (7 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (1 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (3 ms) [ok]: RDB future version loading, strict version check (0 ms) [ok]: RDB future version loading, relaxed version check (10 ms) [ok]: Cluster should eventually be up again (203 ms) [ok]: RDB future version loading with unknown types, relaxed version check (1 ms) [ok]: Cluster is writable (640 ms) [ok]: Instance #5 is now a master (29 ms) [ok]: RDB foreign version loading, relaxed version check (1 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (78 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: RDB foreign version loading with unknown types, relaxed version check (3 ms) [ok]: Failover cancels slot migration in transferred replica (1240 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Server started empty with empty RDB file (3 ms) [ok]: Sub-replica reports zero repl offset and rank, and fails to win election - shutdown (15979 ms) [ok]: Test RDB stream encoding (416 ms) [ok]: Test RDB stream encoding - sanitize dump (33 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (49 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: Test FLUSHALL aborts bgsave (1165 ms) [ok]: bgsave resets the change counter (107 ms) [ok]: bgsave cancel aborts save (384 ms) [ok]: bgsave cancel schedulled request (117 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9849 ms) [104/146 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (44 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (58 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (279 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (146 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (123 ms) [ok]: PSYNC2: generate load while killing replication links (5053 ms) [ok]: PSYNC2: cluster is consistent after load (x = 38774) (16 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (30 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (298 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2: --- CYCLE 6 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (452 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for lua-scripts, without cross-slot keys. (7667 ms) Waiting for process 9868 to exit... [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (429 ms) [ok]: Migration with no replicas (945 ms) [ok]: CLUSTER SETSLOT with an explicit timeout (3069 ms) [ok]: Primaries will not time out then they are elected in the same epoch (5766 ms) [ok]: Test replication with blocking lists and sorted sets operations (25246 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (365 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (140 ms) [105/146 done]: integration/block-repl (27 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: RDB load zipmap hash: converts to listpack (8 ms) [ok]: Multi Part AOF can start when no aof and no manifest (477 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (224 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (163 ms) [ok]: client freed during loading (3835 ms) [106/146 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/cross-version-replication [ignore]: Other server path not provided [107/146 done]: integration/cross-version-replication (0 seconds) Testing integration/logging [ok]: PSYNC2: Set #2 to replicate from #4 (1 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (293 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (77 ms) [ok]: Crash report generated on SIGABRT (124 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (262 ms) [ok]: Crash report generated on DEBUG SEGFAULT (21 ms) [ok]: PSYNC2 #3899 regression: kill first replica (72 ms) [ok]: Stacktraces generated on SIGALRM (110 ms) [ok]: Multi Part AOF can load data from old version valkey (rdb preamble no) (808 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: cluster is consistent after failover (113 ms) [ok]: PSYNC2 #3899 regression: kill first replica (9 ms) [ok]: Read syncslots establish response timeout (3012 ms) [ok]: Config hide-user-data-from-log is off (114 ms) [ok]: Migration cannot connect to target (181 ms) [ok]: Config hide-user-data-from-log is on (0 ms) [ok]: Multi Part AOF can load data from old version valkey (rdb preamble yes) (533 ms) [108/147 done]: integration/logging (2 seconds) Testing integration/replication [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (205 ms) [ok]: Slave enters handshake (0 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (367 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (120 ms) [ok]: Test RDB load info (2610 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (server1) (225 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (server2) (126 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: Slave enters wait_bgsave (1131 ms) [ok]: Client blocked on XREADGROUP while stream's slot is migrated (160 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (1071 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (5 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (927 ms) [ok]: PSYNC2 #3899 regression: kill first replica (13 ms) [ok]: MASTER and SLAVE consistency with expire (17652 ms) [ok]: Multi Part AOF can create BASE (RDB format) when server starts from empty (419 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (199 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (60 ms) [ok]: Multi Part AOF can create BASE (AOF format) when server starts from empty (346 ms) [ok]: PSYNC2 #3899 regression: kill first replica (2 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (52778 ms) [ok]: Test child sending info (3319 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 48896) (2 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (3 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [skip]: slave buffer are counted correctly [ok]: PSYNC2 #3899 regression: kill first replica (3 ms) [ok]: Changing aof-use-rdb-preamble during rewrite process (1726 ms) [ok]: PSYNC2 #3899 regression: verify consistency (211 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (1069 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for lua-scripts, with cross-slot keys. (9722 ms) [ok]: failed bgsave prevents writes (1308 ms) [109/147 done]: integration/psync2-reg (23 seconds) Testing integration/replication-4 [110/147 done]: integration/rdb (19 seconds) Testing integration/aof [111/147 done]: integration/psync2 (45 seconds) Testing integration/shutdown [ok]: First server should have role slave after SLAVEOF (9 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (3 ms) [ok]: AOF enable will create manifest file (1519 ms) [ok]: Short read: Server should start if load-truncated is yes (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Bad format: Server should have logged an error (4 ms) [ok]: Unfinished MULTI: Server should have logged an error (10 ms) [ok]: Short read: Server should have logged an error (2 ms) [ok]: Short read: Utility should confirm the AOF is not valid (8 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (2 ms) [ok]: Short read: Utility should be able to fix the AOF (16 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (122 ms) [ok]: AOF+SPOP: Server should have been started (4 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Slave is able to evict keys created in writable slaves (6070 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (276 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: Server should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (3814 ms) [112/147 done]: integration/replication-3 (27 seconds) Testing integration/valkey-check-rdb [ok]: Check old valid RDB (8 ms) [ok]: Check foreign RDB without unknown data (19 ms) [ok]: Check foreign RDB with unknown data (4 ms) [ok]: Check future RDB without unknown data (33 ms) [ok]: Check future RDB with unknown data (3 ms) [ok]: test valkey-check-rdb stats with empty RDB (40 ms) [ok]: test valkey-check-rdb stats function (25 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (4358 ms) [ok]: test valkey-check-rdb stats key space (332 ms) [113/147 done]: integration/valkey-check-rdb (1 seconds) Testing integration/corrupt-dump [ok]: corrupt payload: #7445 - with sanitize (435 ms) [ok]: Test replication with parallel clients writing in different DBs (5330 ms) [ok]: Sub-replica reports zero repl offset and rank, and fails to win election - sigstop (6016 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for functions, without cross-slot keys. (6457 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (380 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (1399 ms) [ok]: corrupt payload: invalid zlbytes header (251 ms) [ok]: Set instance A as slave of B (899 ms) [ok]: INCRBYFLOAT replication, should not remove expire (5 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (3 ms) [ok]: First server should have role slave after SLAVEOF (106 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (4 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: corrupt payload: valid zipped hash header, dup records (189 ms) [ok]: AOF enable/disable auto gc (374 ms) [ok]: corrupt payload: quicklist big ziplist prev len (259 ms) [ok]: Verify 50000 keys for consistency with logical content (23634 ms) [ok]: AOF can produce consecutive sequence number after reload (510 ms) [ok]: corrupt payload: quicklist small ziplist prev len (507 ms) [ok]: Instance #0 gets converted into a slave (145 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: corrupt payload: quicklist ziplist wrong count (417 ms) [ok]: corrupt payload: #3080 - quicklist (120 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (701 ms) [ok]: Multi/Exec Validation During Slot Migration with Multiple Databases (135 ms) [ok]: corrupt payload: quicklist with empty ziplist (532 ms) [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (4308 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (583 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (298 ms) [ok]: AOF will trigger limit when AOFRW fails many times (1431 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2914 ms) [ok]: BLMOVE (left, right) replication, list exists (1004 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (0 ms) [ok]: corrupt payload: #3080 - ziplist (344 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (48 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (141 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (312 ms) [ok]: BLMOVE (right, left) replication, list exists (1003 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (16 ms) [ok]: corrupt payload: listpack invalid size header (514 ms) [ok]: corrupt payload: listpack too long entry len (292 ms) [ok]: First server should have role slave after SLAVEOF (1317 ms) [ok]: corrupt payload: listpack very long entry len (318 ms) [ok]: BLMOVE (right, right) replication, list exists (1004 ms) [ok]: Replication of an expired key does not delete the expired key (562 ms) [ok]: AOF fsync always barrier issue (7302 ms) [ok]: Replica migration persisted through AOF (4429 ms) [ok]: corrupt payload: listpack too long entry prev len (574 ms) [ok]: BLPOP followed by role change, issue #2473 (361 ms) [ok]: Replica output bytes metric (1 ms) [ok]: GETEX should not append to AOF (9 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: corrupt payload: stream with duplicate consumers (299 ms) [ok]: Unknown command: Server should have logged an error (97 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (121 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: Imported keys are persisted through AOF (1057 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: corrupt payload: hash ziplist with duplicate records (1070 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (101 ms) [ok]: Shutting down master waits for replica timeout (5007 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (26 ms) [ok]: corrupt payload: hash listpack with duplicate records (364 ms) [ok]: SET on the master should immediately propagate (64 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (14 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (450 ms) [ok]: FLUSHDB / FLUSHALL should replicate (694 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: corrupt payload: hash ziplist uneven record count (328 ms) [ok]: corrupt payload: hash duplicate records (141 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (5267 ms) [ok]: corrupt payload: hash empty zipmap (263 ms) [ok]: Generate timestamp annotations in AOF (726 ms) [114/147 done]: integration/aof-multi-part (26 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (198 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (320 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (401 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for functions, with cross-slot keys. (9552 ms) [115/147 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (384 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (256 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (55 ms) [ok]: Truncate AOF to specific timestamp (1313 ms) [116/147 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2-master-restart [ok]: Shutting down master waits for replica then fails (3284 ms) [ok]: corrupt payload: fuzzer findings - hash crash (741 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (193 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (261 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (419 ms) [ok]: corrupt payload: fuzzer findings - empty intset (620 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (580 ms) [ok]: Shutting down master waits for replica then aborted (2480 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (883 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (417 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (590 ms) [ok]: Replica can update the config epoch when trigger the failover - automatic (15939 ms) [ok]: Shutting down primary wait for replica after previous block (1978 ms) [117/147 done]: integration/shutdown (21 seconds) Testing integration/valkey-benchmark [ok]: benchmark: set,get (13 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (376 ms) [ok]: benchmark: connecting using URI set,get (19 ms) [ok]: benchmark: connecting using URI with authentication set,get (16 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (5000 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (294 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1309 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (95 ms) [ok]: EVAL can process writes from AOF in read-only replicas (302 ms) [ok]: benchmark: full test suite (472 ms) [ok]: Test valkey-check-aof for old style resp AOF (9 ms) [ok]: Test valkey-check-aof for old style resp AOF - has data in the same format as manifest (68 ms) [ok]: Test valkey-check-aof for old style rdb-preamble AOF (3 ms) [ok]: Test valkey-check-aof for Multi Part AOF with resp AOF base (17 ms) [ok]: Test valkey-check-aof for Multi Part AOF with rdb-preamble AOF base (87 ms) [ok]: Test valkey-check-aof for Multi Part AOF contains a format error (51 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (393 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in fix mode (73 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (14 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (192 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (499 ms) [ok]: benchmark: multi-thread set,get (949 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (420 ms) [ok]: benchmark: pipelined full set,get (730 ms) [ok]: benchmark: arbitrary command (193 ms) [ok]: MOVE should not be allowed while migrating slots with multi databases (473 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (1176 ms) [ok]: benchmark: arbitrary command sequence (36 ms) value:VXKeHogKgJ=[5V9_X^b?48OKF2jGA of the slave lag (3509 ms) [ok]: min-slaves-to-write is ignored by slaves (4 ms) [ok]: Cross-DB COPY command should not be allow during slot migration (166 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (7217 ms) Waiting for process 3071 to exit... [122/147 done]: integration/psync2-master-restart (23 seconds) Testing integration/replication-psync [ok]: Toggle dual-channel-replication-enabled: yes start (3055 ms) [123/147 done]: unit/cluster/slot-migration (141 seconds) Testing integration/replication-buffer [ok]: Slave should be able to synchronize with the master (857 ms) Waiting for process 3071 to exit... [ok]: Detect write load to master (1331 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, dual-channel: no, reconnect: 0) (33 ms) [124/147 done]: unit/cluster/diskless-load-swapdb (119 seconds) Testing integration/psync2-pingoff [ok]: Online toggle dual-channel-replication-enabled on primary, starting with 'yes' (2867 ms) [ok]: Slave should be able to synchronize with the master (730 ms) [ok]: PSYNC2 pingoff: setup (1006 ms) [ok]: PSYNC2 pingoff: write and wait replication (22 ms) [ok]: All replicas share one global replication buffer dualchannel yes (413 ms) [ok]: Replication buffer will become smaller when no replica uses dualchannel yes (44 ms) [ok]: Replica can update the config epoch when trigger the failover - manual (9264 ms) [ok]: Dumping an RDB - functions only: no (8412 ms) [ok]: Detect write load to master (1020 ms) [125/147 done]: unit/cluster/failover2 (110 seconds) Testing integration/dismiss-mem [ok]: replica buffer don't induce eviction (47273 ms) [ok]: Cluster is up (459 ms) [ok]: valkey-cli make source node ignores NOREPLICAS error when doing the last CLUSTER SETSLOT - setslot (5284 ms) [ok]: Dumping an RDB - functions only: yes (2229 ms) [ok]: Scan mode (438 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (761 ms) [ok]: Cluster is writable (1602 ms) [ok]: Instance #5 is a slave (8 ms) [ok]: Instance #5 synced with the master (1 ms) [ok]: Make instance #0 unreachable without killing it (0 ms) [ok]: Send CLUSTER FAILOVER to instance #5 (0 ms) [ok]: dismiss all data types memory (2341 ms) [ok]: Instance #5 is a master after some time (109 ms) [ok]: All replicas share one global replication buffer dualchannel no (467 ms) [ok]: Replication buffer will become smaller when no replica uses dualchannel no (94 ms) [ok]: dismiss client output buffer (1092 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5016 ms) [ok]: dismiss client query buffer (416 ms) [ok]: Connecting as a replica (2231 ms) [ok]: Wait for instance #0 to return back alive (1886 ms) [ok]: Make the old master a replica of the new one and check conditions (1129 ms) [ok]: Empty primary will check and delete the dirty slots (139 ms) [ok]: Replication: commands with many arguments (issue #1221) (39081 ms) [ok]: spopwithcount rewrite srem command (274 ms) [ok]: AOF maintains consistency through many migrations (39083 ms) [126/147 done]: unit/cluster/replica-migration (212 seconds) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, dual-channel: no, reconnect: 1) (6716 ms) [ok]: client tracking don't cause eviction feedback loop (4318 ms) [127/147 done]: unit/cluster/cluster-migrateslots (238 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb dual-channel-replication-enabled=no (17757 ms) [ok]: propagation with eviction (63 ms) [ok]: dismiss replication backlog (3046 ms) [128/147 done]: integration/dismiss-mem (7 seconds) [ok]: propagation with eviction in MULTI (74 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, blocking command. (18233 ms) [ok]: lru/lfu value of the key just added (0 ms) [ok]: Piping raw protocol (4013 ms) [ok]: Options -X with illegal argument (23 ms) [ok]: DUMP RESTORE with -x option (19 ms) [ok]: Slave should be able to synchronize with the master (1254 ms) [ok]: Detect write load to master (0 ms) [ok]: DUMP RESTORE with -X option (180 ms) [ok]: Import mode should forbid eviction (2 ms) [129/147 done]: unit/maxmemory (299 seconds) [ok]: valkey-cli pubsub mode with single standard channel subscription (358 ms) [ok]: valkey-cli pubsub mode with multiple standard channel subscriptions (449 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (3550 ms) [ok]: valkey-cli pubsub mode with single shard channel subscription (835 ms) [ok]: valkey-cli pubsub mode with multiple shard channel subscriptions (738 ms) [ok]: Online toggle dual-channel-replication-enabled on replica, starting with 'yes' (13028 ms) [ok]: First server should have role slave after SLAVEOF (1147 ms) [ok]: Data divergence can happen under default conditions (63 ms) [ok]: Data divergence is allowed on writable replicas (145 ms) [ok]: valkey-cli pubsub mode with single pattern channel subscription (636 ms) [130/147 done]: integration/replication-4 (58 seconds) [ok]: valkey-cli pubsub mode with multiple pattern channel subscriptions (659 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (5749 ms) [ok]: valkey-cli pubsub mode when subscribing to the same channel (376 ms) [ok]: Replication backlog size can outgrow the backlog limit config dualchannel yes (8321 ms) [ok]: valkey-cli pubsub mode with multiple subscription types (1474 ms) [ok]: valkey-cli make sure selected db survives connection drops (574 ms) [ok]: Valid Connection Scheme: redis:// (16 ms) [ok]: Valid Connection Scheme: valkey:// (1 ms) [ok]: valkey-cli command table hint will not leak memory when COMMAND fails due to auth (549 ms) [131/147 done]: integration/valkey-cli (30 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, dual-channel: no, reconnect: 1) (9041 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, multi-exec transaction. (9467 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (5288 ms) [ok]: Slave should be able to synchronize with the master (1102 ms) [ok]: Detect write load to master (0 ms) [132/147 done]: integration/psync2-pingoff (22 seconds) [ok]: Toggle dual-channel-replication-enabled: no start (13537 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization dualchannel yes (12113 ms) [ok]: Manual failover vote is not limited by two times the node timeout - drop the auth ack (5663 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, non slot specific command. (8355 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica dualchannel yes (726 ms) [ok]: Online toggle dual-channel-replication-enabled on primary, starting with 'no' (2661 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, dual-channel: no, reconnect: 1) (10038 ms) [ok]: Online toggle dual-channel-replication-enabled on replica, starting with 'no' (2784 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (37719 ms) [133/147 done]: integration/replication-2 (43 seconds) [ok]: Slave should be able to synchronize with the master (1214 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled dual-channel-replication-enabled=yes (22556 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, pub/sub. (7977 ms) [ok]: Replication backlog size can outgrow the backlog limit config dualchannel no (7637 ms) [ok]: dual-channel-replication with multiple replicas (5957 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, dual-channel: no, reconnect: 1) (9488 ms) [ok]: Slave should be able to synchronize with the master (118 ms) [ok]: Detect write load to master (1096 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, dual-channel: no, reconnect: 0) (53 ms) [ok]: Manual failover vote is not limited by two times the node timeout - mixed failover (3790 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization dualchannel no (7535 ms) [ok]: Slave should be able to synchronize with the master (108 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica dualchannel no (613 ms) [ok]: Detect write load to master (1008 ms) [ok]: Test diverse replica sync: dual-channel on/off (5539 ms) [ok]: Keys are accessible (65688 ms) [ok]: Test replica's buffer limit reached (3039 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb dual-channel-replication-enabled=yes (17004 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size. dualchannel yes (5475 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, dual-channel: no, reconnect: 1) (6622 ms) [ok]: Slave should be able to synchronize with the master (201 ms) [ok]: Detect write load to master (4 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (31 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending. dualchannel yes (3855 ms) [ok]: dual-channel-replication fails when primary diskless disabled (1067 ms) [ok]: Test dual-channel-replication sync- psync established after rdb load (1060 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, sharded pub/sub. (12848 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size. dualchannel no (5905 ms) [ok]: Automatic failover vote is not limited by two times the node timeout - mixed failover (4970 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, dual-channel: no, reconnect: 1) (8609 ms) [ok]: Slave should be able to synchronize with the master (109 ms) [ok]: Init migration of many slots (15970 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (48 ms) [ok]: Detect write load to master (1067 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending. dualchannel no (3801 ms) [134/147 done]: integration/replication-buffer (69 seconds) [ok]: CLUSTER SLOT-STATS network-bytes-out, for non-slot specific commands. (7957 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, dual-channel: no, reconnect: 1) (9604 ms) [ok]: Slave should be able to synchronize with the master (214 ms) [ok]: dual-channel-replication: Primary COB growth with inactive replica (13335 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test dual-channel: primary tracking replica backlog refcount - start with empty backlog (710 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, for slot specific commands. (8254 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, for slot specific commands, for reply copy avoidance (67 ms) [ok]: Manual failover will reset the on-going election (5638 ms) [ok]: Test dual-channel: primary tracking replica backlog refcount - start with backlog (2512 ms) [ok]: Psync established after rdb load - within grace period (1338 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, dual-channel: no, reconnect: 1) (10032 ms) [ok]: Slave should be able to synchronize with the master (2030 ms) [ok]: Detect write load to master (0 ms) [ok]: Psync established after RDB load - beyond grace period (3390 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, dual-channel: yes, reconnect: 0) (129 ms) [ok]: Slave should be able to synchronize with the master (1009 ms) [ok]: Detect write load to master (0 ms) [ok]: Test dual-channel-replication primary gets cob overrun before established psync (1521 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, blocking commands. (14038 ms) [ok]: Test dual-channel-replication primary gets cob overrun during replica rdb load (1438 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (43738 ms) [ok]: Broadcast PONG to the cluster when the node role changes (1231 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping dual-channel=yes (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (6961 ms) [ok]: Diskless load swapdb (different replid): replica enter loading dual-channel-replication-enabled=no (787 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails dual-channel=no (9 ms) [ok]: Slave should be able to synchronize with the master (2638 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (557 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (1746 ms) [ok]: Busy script during async loading (1680 ms) [ok]: Blocked commands and configs during async-loading (727 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (8641 ms) [ok]: The role change and the slot ownership change should be an atomic operation (333 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, replication stream egress. (4503 ms) [ok]: Sync should continue if not all slaves dropped (15404 ms) Waiting for process 25567 to exit... [ok]: Slave should be able to synchronize with the master (1979 ms) [ok]: Detect write load to master (1 ms) Waiting for process 25567 to exit... Waiting for process 25567 to exit... Waiting for process 25567 to exit... [ok]: Primary abort sync if all slaves dropped dual-channel-replication (6234 ms) [ok]: Cluster is up (179 ms) [ok]: Cluster is writable (96 ms) [ok]: Instance #5 is a slave (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (9858 ms) [ok]: Test dual-channel-replication replica main channel disconnected (567 ms) [ok]: Test dual channel replication slave of no one after main conn kill (21 ms) [ok]: Slave should be able to synchronize with the master (1047 ms) [ok]: Detect write load to master (0 ms) [ok]: Node will fix the replicaof when it finds that it is a sub-replica (1637 ms) [ok]: Test dual-channel-replication replica rdb connection disconnected (1352 ms) [ok]: Test dual channel replication slave of no one after rdb conn kill (164 ms) [135/147 done]: unit/cluster/manual-failover (247 seconds) [ok]: Test dual-channel-replication primary reject set-rdb-client after client killed (1386 ms) [ok]: Test replica unable to join dual channel replication sync after started (1167 ms) [ok]: client do not break when cluster slot (7211 ms) [ok]: client can handle keys with hash tag (121 ms) [ok]: slot migration is valid from primary to another primary (405 ms) [ok]: slot migration is invalid from primary to replica (244 ms) [ok]: Replica recover rdb-connection killed (3048 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (10084 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, sharded pub/sub, single channel. (13762 ms) [ok]: Replica recover main-connection killed (2861 ms) [ok]: Slave should be able to synchronize with the master (2131 ms) [ok]: Detect write load to master (3 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, dual-channel: no, reconnect: 0) (188 ms) [ok]: Slave should be able to synchronize with the master (1062 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, dual-channel: no, reconnect: 1) (6681 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, sharded pub/sub, cross-slot channels. (10054 ms) [ok]: Slave should be able to synchronize with the master (905 ms) [ok]: Detect write load to master (2 ms) [ok]: Replica notice main-connection killed during rdb load callback (8831 ms) [ok]: Chained replicas can disconnect protected RDB channel client when using dual channel replication (3858 ms) [136/147 done]: integration/dual-channel-replication (174 seconds) [ok]: CLUSTER SLOT-STATS contains default value upon valkey-server startup (7007 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, dual-channel: no, reconnect: 1) (9382 ms) [ok]: Slave should be able to synchronize with the master (923 ms) [ok]: Detect write load to master (6 ms) [ok]: slot must be unbound on the owner when it is deleted (28804 ms) [ok]: CLUSTER SLOT-STATS contains correct metrics upon key introduction (5142 ms) [137/147 done]: unit/cluster/cluster-slots (381 seconds) [ok]: CLUSTER SLOT-STATS contains correct metrics upon key mutation (4724 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, dual-channel: no, reconnect: 1) (9542 ms) Waiting for process 26332 to exit... [ok]: diskless loading short read (50544 ms) [ok]: CLUSTER SLOT-STATS contains correct metrics upon key deletion (5063 ms) [ok]: Slave should be able to synchronize with the master (3494 ms) [ok]: Detect write load to master (0 ms) [ok]: CLUSTER SLOT-STATS slot visibility based on slot ownership changes (11747 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, dual-channel: no, reconnect: 1) (10855 ms) [ok]: diskless no replicas drop during rdb pipe (14468 ms) [ok]: CLUSTER SLOT-STATS SLOTSRANGE all slots present (0 ms) [ok]: CLUSTER SLOT-STATS SLOTSRANGE some slots missing (2 ms) [ok]: Slave should be able to synchronize with the master (1883 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, dual-channel: yes, reconnect: 0) (57 ms) [ok]: Slave should be able to synchronize with the master (688 ms) [ok]: Detect write load to master (22 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (7525 ms) [ok]: Slave should be able to synchronize with the master (654 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless slow replicas drop during rdb pipe (11665 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (8545 ms) [ok]: Slave should be able to synchronize with the master (635 ms) [ok]: Detect write load to master (52 ms) [ok]: diskless fast replicas drop during rdb pipe (11975 ms) [ok]: CLUSTER SLOT-STATS ORDERBY DESC correct ordering (20739 ms) [ok]: diskless all replicas drop during rdb pipe (1546 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (10020 ms) [ok]: Slave should be able to synchronize with the master (1764 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless timeout replicas drop during rdb pipe (13797 ms) [ok]: diskless replication child being killed is collected (1854 ms) [ok]: CLUSTER SLOT-STATS ORDERBY ASC correct ordering (18047 ms) [ok]: CLUSTER SLOT-STATS ORDERBY LIMIT correct response pagination, where limit is less than number of assigned slots (16 ms) [ok]: CLUSTER SLOT-STATS ORDERBY LIMIT correct response pagination, where limit is greater than number of assigned slots (23 ms) [ok]: CLUSTER SLOT-STATS ORDERBY arg sanity check. (1 ms) [ok]: replication child dies when parent is killed - diskless: yes dual-channel-replication-enabled: yes (1751 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (10287 ms) [ok]: replication child dies when parent is killed - diskless: no dual-channel-replication-enabled: no (2251 ms) [ok]: Slave should be able to synchronize with the master (1163 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless replication read pipe cleanup (1313 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, dual-channel: no, reconnect: 0) (842 ms) [ok]: Slave should be able to synchronize with the master (959 ms) [ok]: Detect write load to master (0 ms) [ok]: replicaof right after disconnection (2959 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (1690 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync with dual-channel-replication yes (3 ms) [ok]: Discard cache master before loading transferred RDB when full sync with dual-channel-replication yes (314 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (6912 ms) [ok]: Slave should be able to synchronize with the master (965 ms) [ok]: Detect write load to master (0 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync with dual-channel-replication no (84 ms) [ok]: Discard cache master before loading transferred RDB when full sync with dual-channel-replication no (131 ms) [ok]: replica can handle EINTR if use diskless load (1238 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (98 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (181 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (139 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (61 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (1214 ms) [ok]: replica actually flushes db if use diskless load with flush-before-load dual-channel-replication-enabled=yes (1132 ms) [ok]: CLUSTER SLOT-STATS metrics replication for new keys (9895 ms) [ok]: replica actually flushes db if use diskless load with flush-before-load dual-channel-replication-enabled=no (961 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (8654 ms) [ok]: Replica keep the old data if RDB file save fails in disk-based replication (1697 ms) [138/147 done]: integration/replication (301 seconds) [ok]: Slave should be able to synchronize with the master (874 ms) [ok]: Detect write load to master (0 ms) [ok]: CLUSTER SLOT-STATS metrics replication for existing keys (10442 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (9791 ms) [ok]: Slave should be able to synchronize with the master (932 ms) [ok]: Detect write load to master (0 ms) [ok]: CLUSTER SLOT-STATS metrics replication for deleting keys (8940 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (9448 ms) [139/147 done]: integration/replication-psync (277 seconds) [ok]: CLUSTER SLOT-STATS network-bytes-out with copy avoidance and commandlog disabled (6635 ms) [140/147 done]: unit/cluster/slot-stats (421 seconds) [ok]: Fix cluster (242547 ms) [ok]: Keys are accessible (11679 ms) [141/147 done]: unit/cluster/many-slot-migration (425 seconds) Testing solo test Jemalloc not available. Defrag tests skipped. [142/147 done]: defrag (1 seconds) Testing solo test [ignore]: large memory flag not provided [143/147 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [144/147 done]: violations (0 seconds) Testing solo test [ignore]: large memory flag not provided [145/147 done]: list-large-memory (0 seconds) Testing solo test [ignore]: large memory flag not provided [146/147 done]: set-large-memory (0 seconds) Testing solo test [ok]: Multiple primary nodes are down, rank them based on the failed primary (22551 ms) [147/147 done]: cluster (54 seconds) The End Execution time of different units: 1 seconds - unit/replybufsize 5 seconds - unit/keyspace 0 seconds - unit/quit 6 seconds - unit/querybuf 0 seconds - unit/oom-score-adj 8 seconds - unit/memefficiency 8 seconds - unit/acl 1 seconds - unit/acl-v2 10 seconds - unit/introspection-2 6 seconds - unit/networking 11 seconds - unit/bitops 2 seconds - unit/slowlog 2 seconds - unit/shutdown 4 seconds - unit/tracking 29 seconds - unit/latency-monitor 2 seconds - unit/commandlog 1 seconds - unit/info-command 32 seconds - unit/introspection 2 seconds - unit/lazyfree 1 seconds - unit/pubsub 6 seconds - unit/info 35 seconds - unit/functions 37 seconds - unit/other 5 seconds - unit/bitfield 40 seconds - unit/aofrw 1 seconds - unit/tls 0 seconds - unit/violations 41 seconds - unit/dump 7 seconds - unit/auth 2 seconds - unit/limits 2 seconds - unit/protocol 3 seconds - unit/pubsubshard 47 seconds - unit/sort 11 seconds - unit/multi 34 seconds - unit/obuf-limits 47 seconds - unit/wait 1 seconds - unit/type/incr 21 seconds - unit/expire 10 seconds - unit/type/stream-cgroups 17 seconds - unit/pause 21 seconds - unit/type/hash 14 seconds - unit/cluster/announce-client-ports 27 seconds - unit/type/string 68 seconds - unit/scripting 2 seconds - unit/cluster/packet 47 seconds - unit/scan 37 seconds - unit/type/set 27 seconds - unit/type/list 8 seconds - unit/cluster/slot-migration-response 88 seconds - unit/client-eviction 18 seconds - unit/cluster/faildet 18 seconds - unit/cluster/hostnames 98 seconds - unit/geo 49 seconds - unit/type/list-2 57 seconds - unit/type/stream 24 seconds - unit/cluster/manual-takeover 15 seconds - unit/cluster/transactions-on-replica 27 seconds - unit/cluster/update-msg 45 seconds - unit/cluster/cli 2 seconds - unit/cluster/divergent-cluster-shardid-conf 15 seconds - unit/cluster/noaddr 87 seconds - unit/type/zset 4 seconds - unit/cluster/multi-slot-operations 26 seconds - unit/cluster/consistency-check 48 seconds - unit/cluster/slave-stop-cond 147 seconds - unit/hyperloglog 18 seconds - unit/cluster/no-failover-option 17 seconds - unit/cluster/cluster-shards 97 seconds - unit/type/list-3 3 seconds - unit/cluster/scripting 16 seconds - unit/cluster/pubsubshard-slot-migration 44 seconds - unit/cluster/failover 5 seconds - unit/cluster/half-migrated-slot 33 seconds - unit/cluster/announce-client-ip 8 seconds - unit/cluster/human-announced-nodename 31 seconds - unit/cluster/cluster-reliable-meet 0 seconds - unit/cluster/cluster-response-tls 5 seconds - unit/cluster/cluster-multiple-meets 17 seconds - unit/cluster/shardid-propagation 7 seconds - unit/cluster/shutdown 86 seconds - unit/cluster/slave-selection 12 seconds - unit/cluster/base 13 seconds - unit/cluster/sharded-pubsub 28 seconds - unit/cluster/links 15 seconds - unit/cluster/replica-detach 15 seconds - unit/cluster/info 186 seconds - unit/hashexpire 60 seconds - unit/cluster/slot-ownership 14 seconds - unit/cluster/cluster-nodes-slots 26 seconds - unit/cluster/misc 85 seconds - unit/cluster/auto-failover-on-shutdown 19 seconds - unit/cluster/pubsub 13 seconds - unit/cluster/replica-redirect 0 seconds - unit/cluster/cross-version-cluster 14 seconds - unit/cluster/announced-endpoints 28 seconds - unit/cluster/cluster-flush-slot 1 seconds - integration/aof-race 15 seconds - unit/cluster/pubsubshard 32 seconds - unit/cluster/multidb 23 seconds - unit/cluster/replica-in-sync 1 seconds - integration/skip-rdb-checksum 9 seconds - integration/failover 75 seconds - unit/cluster/failure-marking 20 seconds - integration/corrupt-dump-fuzzer 27 seconds - integration/block-repl 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/cross-version-replication 2 seconds - integration/logging 23 seconds - integration/psync2-reg 19 seconds - integration/rdb 45 seconds - integration/psync2 27 seconds - integration/replication-3 1 seconds - integration/valkey-check-rdb 26 seconds - integration/aof-multi-part 1 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 21 seconds - integration/shutdown 3 seconds - integration/valkey-benchmark 25 seconds - integration/aof 5 seconds - integration/replica-redirect 28 seconds - integration/corrupt-dump 23 seconds - integration/psync2-master-restart 141 seconds - unit/cluster/slot-migration 119 seconds - unit/cluster/diskless-load-swapdb 110 seconds - unit/cluster/failover2 212 seconds - unit/cluster/replica-migration 238 seconds - unit/cluster/cluster-migrateslots 7 seconds - integration/dismiss-mem 299 seconds - unit/maxmemory 58 seconds - integration/replication-4 30 seconds - integration/valkey-cli 22 seconds - integration/psync2-pingoff 43 seconds - integration/replication-2 69 seconds - integration/replication-buffer 247 seconds - unit/cluster/manual-failover 174 seconds - integration/dual-channel-replication 381 seconds - unit/cluster/cluster-slots 301 seconds - integration/replication 277 seconds - integration/replication-psync 421 seconds - unit/cluster/slot-stats 425 seconds - unit/cluster/many-slot-migration 1 seconds - defrag 0 seconds - bitops-large-memory 0 seconds - violations 0 seconds - list-large-memory 0 seconds - set-large-memory 54 seconds - cluster \o/ All tests passed without errors! Cleanup: may take some time... OK >>> valkey: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MM acl.c adlist.c ae.c allocator_defrag.c anet.c aof.c bio.c bitops.c blocked.c call_reply.c childinfo.c cli_commands.c cli_common.c cluster.c cluster_legacy.c cluster_migrateslots.c cluster_slot_stats.c commandlog.c commands.c config.c connection.c crc16.c crc64.c crccombine.c crcspeed.c db.c debug.c defrag.c dict.c endianconv.c entry.c eval.c evict.c expire.c functions.c geo.c geohash.c geohash_helper.c hashtable.c hyperloglog.c intset.c io_threads.c kvstore.c latency.c lazyfree.c listpack.c localtime.c logreqres.c lolwut.c lolwut5.c lolwut6.c lolwut9.c lua/debug_lua.c lua/engine_lua.c lua/function_lua.c lua/script_lua.c lzf_c.c lzf_d.c memory_prefetch.c memtest.c module.c monotonic.c mt19937-64.c multi.c networking.c notify.c object.c pqsort.c pubsub.c quicklist.c rand.c rax.c rdb.c rdma.c release.c replication.c resp_parser.c rio.c script.c scripting_engine.c sds.c sentinel.c server.c serverassert.c setcpuaffinity.c setproctitle.c sha1.c sha256.c siphash.c socket.c sort.c sparkline.c strl.c syncio.c syscheck.c t_hash.c t_list.c t_set.c t_stream.c t_string.c t_zset.c threads_mngr.c timeout.c tls.c trace/trace.c trace/trace_aof.c trace/trace_cluster.c trace/trace_commands.c trace/trace_db.c trace/trace_rdb.c trace/trace_server.c tracking.c unix.c util.c valkey-benchmark.c valkey-check-aof.c valkey-check-rdb.c valkey-cli.c vector.c vset.c ziplist.c zipmap.c zmalloc.c > Makefile.dep 2> /dev/null || true cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o release.o -c release.c cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-server threads_mngr.o adlist.o vector.o quicklist.o ae.o anet.o dict.o hashtable.o kvstore.o server.o sds.o zmalloc.o lzf_c.o lzf_d.o pqsort.o zipmap.o sha1.o ziplist.o release.o memory_prefetch.o io_threads.o networking.o util.o object.o db.o replication.o rdb.o t_string.o t_list.o t_set.o t_zset.o t_hash.o config.o aof.o pubsub.o multi.o debug.o sort.o intset.o syncio.o cluster.o cluster_legacy.o cluster_slot_stats.o crc16.o cluster_migrateslots.o endianconv.o commandlog.o eval.o bio.o rio.o rand.o memtest.o syscheck.o crcspeed.o crccombine.o crc64.o bitops.o sentinel.o notify.o setproctitle.o blocked.o hyperloglog.o latency.o sparkline.o valkey-check-rdb.o valkey-check-aof.o geo.o lazyfree.o module.o evict.o expire.o geohash.o geohash_helper.o childinfo.o allocator_defrag.o defrag.o siphash.o rax.o t_stream.o listpack.o localtime.o lolwut.o lolwut5.o lolwut6.o lolwut9.o acl.o tracking.o socket.o tls.o sha256.o timeout.o setcpuaffinity.o monotonic.o mt19937-64.o resp_parser.o call_reply.o script.o functions.o commands.o strl.o connection.o unix.o logreqres.o rdma.o scripting_engine.o entry.o vset.o lua/script_lua.o lua/function_lua.o lua/engine_lua.o lua/debug_lua.o trace/trace.o trace/trace_commands.o trace/trace_db.o trace/trace_cluster.o trace/trace_server.o trace/trace_rdb.o trace/trace_aof.o ../deps/libvalkey/lib/libvalkey.a ../deps/lua/src/liblua.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-cli anet.o adlist.o dict.o valkey-cli.o zmalloc.o release.o ae.o serverassert.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o cli_commands.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/linenoise/linenoise.o ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-benchmark ae.o anet.o valkey-benchmark.o adlist.o dict.o zmalloc.o serverassert.o release.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto install valkey-server valkey-sentinel install valkey-server valkey-check-rdb install valkey-server valkey-check-aof cc -o valkey-tls.so tls.c -shared -fPIC -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -DBUILD_TLS_MODULE=2 ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto Hint: It's a good idea to run 'make test' ;) install valkey-server /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin install valkey-benchmark /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin install valkey-cli /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin ln -sf valkey-server /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-server ln -sf valkey-cli /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-cli ln -sf valkey-benchmark /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-benchmark ln -sf valkey-check-rdb /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-rdb ln -sf valkey-check-aof /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-aof ln -sf valkey-sentinel /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-sentinel make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.4/src' >>> valkey-tls*: Running split function tls... 'usr/lib/valkey/modules/tls.so' -> '/home/buildozer/aports/main/valkey/pkg/valkey-tls/usr/lib/valkey/modules/tls.so' 'etc/valkey/modules/tls.conf' -> '/home/buildozer/aports/main/valkey/pkg/valkey-tls/etc/valkey/modules/tls.conf' >>> valkey-tls*: Preparing subpackage valkey-tls... >>> valkey-tls*: Stripping binaries >>> valkey-tls*: Running postcheck for valkey-tls >>> valkey-benchmark*: Running split function benchmark... 'usr/bin/valkey-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-benchmark/usr/bin/valkey-benchmark' >>> valkey-benchmark*: Preparing subpackage valkey-benchmark... >>> valkey-benchmark*: Stripping binaries >>> valkey-benchmark*: Running postcheck for valkey-benchmark >>> valkey-cli*: Running split function cli... 'usr/bin/valkey-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-cli/usr/bin/valkey-cli' >>> valkey-cli*: Preparing subpackage valkey-cli... >>> valkey-cli*: Stripping binaries >>> valkey-cli*: Running postcheck for valkey-cli >>> valkey-compat*: Running split function compat... 'usr/bin/redis-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-benchmark' 'usr/bin/redis-check-aof' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-aof' 'usr/bin/redis-check-rdb' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-rdb' 'usr/bin/redis-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-cli' 'usr/bin/redis-sentinel' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-sentinel' 'usr/bin/redis-server' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-server' >>> valkey-compat*: Preparing subpackage valkey-compat... >>> valkey-compat*: Script found. /bin/sh added as a dependency >>> valkey-compat*: Adding .pre-install >>> valkey-compat*: Running postcheck for valkey-compat >>> valkey-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/init.d' >>> valkey-openrc*: Preparing subpackage valkey-openrc... >>> valkey-openrc*: Running postcheck for valkey-openrc >>> valkey*: Running postcheck for valkey >>> valkey*: Preparing package valkey... >>> valkey*: Stripping binaries >>> valkey*: Script found. /bin/sh added as a dependency >>> valkey*: Adding .pre-install >>> valkey*: Adding .post-install libfakeroot internal error: payload not recognized! >>> valkey*: Scanning shared objects >>> valkey-tls*: Scanning shared objects >>> valkey-benchmark*: Scanning shared objects >>> valkey-cli*: Scanning shared objects >>> valkey-benchmark*: Tracing dependencies... so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-benchmark*: Package size: 318.7 KB >>> valkey-benchmark*: Compressing data... >>> valkey-benchmark*: Create checksum... >>> valkey-benchmark*: Create valkey-benchmark-9.0.4-r0.apk >>> valkey-cli*: Tracing dependencies... so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-cli*: Package size: 659.8 KB >>> valkey-cli*: Compressing data... >>> valkey-cli*: Create checksum... libfakeroot internal error: payload not recognized! >>> valkey-cli*: Create valkey-cli-9.0.4-r0.apk >>> valkey-compat*: Tracing dependencies... !redis !redict-compat /bin/sh valkey-cli=9.0.4-r0 valkey=9.0.4-r0 >>> valkey-compat*: Package size: 1.0 B >>> valkey-compat*: Compressing data... >>> valkey-compat*: Create checksum... >>> valkey-compat*: Create valkey-compat-9.0.4-r0.apk >>> valkey-openrc*: Tracing dependencies... >>> valkey-openrc*: Package size: 2.6 KB >>> valkey-openrc*: Compressing data... >>> valkey-openrc*: Create checksum... >>> valkey-openrc*: Create valkey-openrc-9.0.4-r0.apk >>> valkey-tls*: Tracing dependencies... valkey=9.0.4-r0 so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-tls*: Package size: 82.0 KB >>> valkey-tls*: Compressing data... >>> valkey-tls*: Create checksum... >>> valkey-tls*: Create valkey-tls-9.0.4-r0.apk >>> valkey*: Tracing dependencies... /bin/sh so:libc.musl-s390x.so.1 >>> valkey*: Package size: 3.3 MB >>> valkey*: Compressing data... >>> valkey*: Create checksum... >>> valkey*: Create valkey-9.0.4-r0.apk >>> valkey: Build complete at Sun, 10 May 2026 19:28:02 +0000 elapsed time 0h 13m 32s >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Uninstalling dependencies... ( 1/10) Purging .makedepends-valkey (20260510.191431) ( 2/10) Purging linux-headers (7.0.0-r1) ( 3/10) Purging openssl-dev (3.5.6-r0) ( 4/10) Purging tcl (8.6.17-r1) ( 5/10) Purging tzdata (2026b-r0) ( 6/10) Purging procps-ng (4.0.6-r0) ( 7/10) Purging libintl (1.0-r0) ( 8/10) Purging libproc2 (4.0.6-r0) ( 9/10) Purging utmps-libs (0.1.3.3-r0) (10/10) Purging skalibs-libs (2.15.0.0-r0) Executing busybox-1.37.0-r31.trigger OK: 386.1 MiB in 105 packages >>> valkey: Updating the main/s390x repository index... >>> valkey: Signing the index...