>>> redis: Building community/redis 7.2.5-r2 (using abuild 3.13.0-r5) started Thu, 03 Oct 2024 12:59:38 +0000 >>> redis: Checking sanity of /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.2-r2) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20241003.125939) Executing busybox-1.36.1-r32.trigger OK: 430 MiB in 125 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.5.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 8 3307k 8 288k 0 0 1206k 0 0:00:02 --:--:-- 0:00:02 1205k 100 3307k 100 3307k 0 0 9976k 0 --:--:-- --:--:-- --:--:-- 9961k >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.5.tar.gz >>> redis: Checking sha512sums... redis-7.2.5.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK CVE-2024-31227.patch: OK CVE-2024-31228.patch: OK CVE-2024-31449.patch: OK >>> redis: Unpacking /var/cache/distfiles/edge/redis-7.2.5.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). >>> redis: CVE-2024-31227.patch patching file src/acl.c Hunk #1 succeeded at 1051 (offset -22 lines). patching file tests/unit/acl-v2.tcl Hunk #1 succeeded at 116 (offset -6 lines). >>> redis: CVE-2024-31228.patch patching file src/util.c Hunk #1 succeeded at 54 (offset 21 lines). Hunk #2 succeeded at 70 (offset 21 lines). Hunk #3 succeeded at 192 (offset 21 lines). patching file tests/unit/keyspace.tcl >>> redis: CVE-2024-31449.patch patching file deps/lua/src/lua_bit.c patching file tests/unit/scripting.tcl Hunk #1 succeeded at 613 (offset -86 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o In file included from server.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from networking.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from t_string.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from rdb.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from replication.c:32: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from aof.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from sort.c:32: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from eval.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from multi.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from cluster.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from t_set.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from pubsub.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from object.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from config.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from rio.c:57: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from debug.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC redis-check-rdb.o In file included from t_zset.c:59: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC redis-check-aof.o In file included from db.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from t_hash.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC geo.o In file included from sentinel.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from bitops.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC lazyfree.o CC module.o In file included from syncio.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC evict.o In file included from crc16.c:1: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from bio.c:63: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from slowlog.c:42: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC expire.o In file included from notify.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC geohash.o CC geohash_helper.o In file included from hyperloglog.c:32: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from blocked.c:63: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from t_list.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC childinfo.o CC defrag.o CC siphash.o CC rax.o In file included from latency.c:36: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from sparkline.c:33: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from lazyfree.c:1: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC t_stream.o CC listpack.o In file included from geo.h:4, from geo.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from evict.c:33: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from redis-check-rdb.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from redis-check-aof.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC localtime.o CC lolwut.o CC lolwut5.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:295:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 295 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:446:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 446 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 447 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o In file included from module.c:54: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o In file included from expire.c:33: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from childinfo.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from defrag.c:36: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from t_stream.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC script_lua.o CC script.o CC functions.o In file included from lolwut5.c:36: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC function_lua.o In file included from lolwut.c:36: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from lolwut6.c:42: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC commands.o CC strl.o In file included from acl.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC connection.o CC unix.o CC logreqres.o In file included from socket.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from tracking.c:31: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o In file included from call_reply.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from resp_parser.c:59: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from script_lua.h:51, from script_lua.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from timeout.c:29: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from functions.h:46, from functions.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from tls.c:32: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from commands.c:2: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from unix.c:27: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from functions.h:46, from function_lua.c:42: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from script.c:30: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from logreqres.c:70: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ In file included from connection.c:27: server.h:2051:1: note: the alignment of '_Atomic long long unsigned int' fields changed in GCC 11.1 2051 | }; | ^ LINK redis-benchmark LINK redis-server LINK redis-cli In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:664:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:667:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:516:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:518:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:664:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:667:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:664:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisFormatCommandArgv' at ../deps/hiredis/hiredis.c:667:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisFormatCommandArgv': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:516:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:518:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:516:11: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ In function 'sprintf', inlined from 'redisvFormatCommand' at ../deps/hiredis/hiredis.c:518:16: /usr/include/fortify/stdio.h:303:15: warning: '__orig_snprintf' specified size 4294967295 exceeds maximum object size 2147483647 [-Wstringop-overflow=] 303 | __r = __orig_snprintf(__s, __b, __f, __builtin_va_arg_pack()); | ^ /usr/include/fortify/stdio.h: In function 'redisvFormatCommand': /usr/include/fortify/stdio.h:274:1: note: in a call to function '__orig_snprintf' declared with attribute 'access (read_only, 3)' 274 | _FORTIFY_FN(snprintf) int snprintf(char *__s, size_t __n, | ^ INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 13519 Testing unit/printver [ready]: 13514 Testing unit/dump [ready]: 13515 Testing unit/auth [ready]: 13523 Testing unit/protocol [ready]: 13527 Testing unit/keyspace [ready]: 13518 Testing unit/scan [ready]: 13516 Testing unit/info [ready]: 13517 Testing unit/info-command [ready]: 13521 Testing unit/type/string [ready]: 13524 Testing unit/type/incr [ready]: 13520 Testing unit/type/list [ready]: 13525 Testing unit/type/list-2 [ready]: 13522 Testing unit/type/list-3 [ready]: 13526 Testing unit/type/set [ready]: 13529 Testing unit/type/zset [ready]: 13528 Testing unit/type/hash Testing Redis version 7.2.5 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: DEL against a single item (1 ms) [ok]: SET and GET an item (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: Explicit regression for a list bug (0 ms) [ok]: Vararg DEL (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: info command with at most one sub command (2 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: info command with one sub-section (0 ms) [ok]: INCR against non existing key (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: Is the small hash encoded with a listpack? (1 ms) [ok]: DECR against key created by incr (0 ms) [ok]: DBSIZE (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: reg node check compression with insert and pop (2 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (2 ms) [ok]: INCR over 32bit value (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: DEL all keys (1 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: RESTORE can set LFU (1 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: reg node check compression with lset (0 ms) [ok]: DECRBY negation overflow (1 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: plain node check compression (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: plain node check compression using lset (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: No negative zero (1 ms) [ok]: HRANDFIELD - listpack (7 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (14 ms) [ok]: HRANDFIELD - hashtable (6 ms) [ok]: ZADD INCR LT/GT with inf - listpack (2 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (2 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (1 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: SADD against non set (1 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (1 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (2 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: SADD a non-integer against a large intset (12 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (5 ms) [ok]: Handle an empty query (42 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: SADD an integer larger than 64 bits to a large intset (11 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (3 ms) [ok]: ZLEXCOUNT advanced - listpack (2 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (8 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (4 ms) [ok]: Very big payload in GET/SET (57 ms) [ok]: ZREMRANGEBYLEX basics - listpack (9 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: SCAN basic (74 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (1 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: Negative multibulk length (43 ms) [ok]: Out of range multibulk length (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: Negative multibulk payload length (1 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (40 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: Unbalanced number of quotes (1 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (11 ms) [1/91 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (94 ms) [ok]: DUMP of non existing key returns nil (0 ms) [2/91 done]: unit/type/incr (0 seconds) Testing unit/type/stream-cgroups [3/91 done]: unit/info-command (0 seconds) Testing unit/sort [ok]: latencystats: disable/enable (1 ms) [ok]: latencystats: configure percentiles (1 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: Protocol desync regression test #1 (36 ms) [ok]: latencystats: blocking commands (3 ms) [ok]: latencystats: subcommands (1 ms) [ok]: HRANDFIELD with - hashtable (115 ms) [ok]: Regression for quicklist #3343 bug (137 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (47 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: SCAN COUNT (72 ms) [ok]: Protocol desync regression test #2 (35 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (3 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (42 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: Variadic SADD (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (3 ms) [ok]: Protocol desync regression test #3 (34 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: SCAN MATCH (62 ms) [ok]: XADD wrong number of args (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: Check compression with recompress (90 ms) [ok]: Test LPUSH and LPOP on plain nodes (4 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: test large number of args (46 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: HRANDFIELD with - listpack (111 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (1 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (23 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: XADD with MAXLEN option (87 ms) [ok]: SCAN TYPE (98 ms) [ok]: stats: eventloop metrics (111 ms) [ok]: Set encoding after DEBUG RELOAD (121 ms) [ok]: SREM basics - $type (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (31 ms) [ok]: MIGRATE is caching connections (215 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (3 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (3 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: SREM basics - $type (13 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (1 ms) [ok]: HSET/HLEN - Big hash creation (109 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (1 ms) [ok]: SCAN unknown type (57 ms) [ok]: Test LSET with packed / plain combinations (140 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (1 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (3 ms) [ok]: SUNION with two sets - regular (11 ms) [ok]: SUNIONSTORE with two sets - regular (10 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: SUNION with non existing keys - regular (11 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: XADD with MAXLEN option and the '=' argument (118 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: HGET against the big hash (70 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: SCAN with expired keys (65 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (9 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (1 ms) [ok]: Quicklist: SORT BY key (10 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Crash due to wrongly recompress after lrem (220 ms) [ok]: Quicklist: SORT BY hash field (11 ms) [ok]: HMSET - big hash (54 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: HMGET - small hash (0 ms) [ok]: Generated sets must be encoded correctly - intset (1 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (44 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: SCAN with expired keys with TYPE filter (65 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SUNION with two sets - intset (6 ms) [ok]: SSCAN with encoding hashtable (3 ms) [ok]: HSCAN with encoding listpack (2 ms) [ok]: SUNIONSTORE with two sets - intset (7 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (6 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: XADD with MAXLEN option and the '~' argument (93 ms) [ok]: XADD with NOMKSTREAM option (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (5 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [4/91 done]: unit/protocol (0 seconds) Testing unit/expire [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (19 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (1 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: HMGET - big hash (60 ms) [ok]: HKEYS - small hash (0 ms) [ok]: Test LSET with packed consist only one item (178 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: HKEYS - big hash (14 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (0 ms) [ok]: HSCAN with encoding hashtable (75 ms) [ok]: ZSCAN with encoding listpack (2 ms) [ok]: HGETALL - big hash (28 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (1 ms) [ok]: XADD with MINID option (93 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: HINCRBY can detect overflows (1 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (1 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: EXPIRE - set timeouts multiple times (2 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: ZSCAN with encoding skiplist (80 ms) [ok]: SCAN guarantees check under write load (24 ms) [ok]: SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: HSTRLEN against the big hash (89 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (3 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: Hash fuzzing #1 - 10 fields (32 ms) [ok]: Hash fuzzing #2 - 10 fields (19 ms) [ok]: LPOS basic usage - quicklist (41 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: ZSCAN scores: regression test for issue #2175 (154 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (85 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (42 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (4 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (1 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (1 ms) [ok]: BLPOP: single existing list - quicklist (44 ms) [ok]: BLPOP: multiple existing lists - quicklist (86 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (1 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (1 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (1 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: BLPOP: second list has an entry - quicklist (46 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (1 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (47 ms) [ok]: COPY basic usage for list - quicklist (46 ms) [ok]: COPY basic usage for list - listpack (2 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (21 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (16 ms) [ok]: COPY basic usage for listpack hash (2 ms) [ok]: COPY basic usage for hashtable hash (27 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (90 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: BRPOPLPUSH - quicklist (44 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1094 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (5 ms) [ok]: BLMOVE left right - quicklist (43 ms) [ok]: RENAME can unblock XREADGROUP with data (3 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (2 ms) [ok]: COPY basic usage for stream (205 ms) [ok]: COPY basic usage for stream-cgroups (15 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (2 ms) [ok]: MOVE does not create an expire if it does not exist (2 ms) [ok]: SET/GET keys in different DBs (2 ms) [ok]: MASTERAUTH test with binary password (912 ms) [ok]: BLMOVE right left - quicklist (44 ms) [ok]: RANDOMKEY (14 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (1 ms) [ok]: Regression for pattern matching long nested loops (1 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (3 ms) [ok]: BLPOP: second list has an entry - listpack (2 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (3 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (3 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (2 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (3 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (2 ms) [ok]: BLMOVE right right - listpack (2 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (3 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (2 ms) [ok]: BLPOP with variadic LPUSH (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (2 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: Regression for pattern matching very long nested loops (93 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (3 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (3 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (3 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (2 ms) [ok]: BRPOPLPUSH with multiple blocked clients (3 ms) [ok]: BLMPOP with multiple blocked clients (5 ms) [ok]: Linked LMOVEs (3 ms) [ok]: Circular BRPOPLPUSH (3 ms) [5/91 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (2 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (3 ms) [6/91 done]: unit/auth (1 seconds) Testing unit/multi [ok]: Coverage: HELP commands (3 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: SAVE - make sure there are all the types as values (2 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (0 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (2 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (0 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: stats: debug metrics (115 ms) [ok]: XCLAIM can claim PEL items from another consumer (605 ms) [ok]: Hash fuzzing #1 - 512 fields (1377 ms) [7/91 done]: unit/info (2 seconds) Testing unit/quit [ok]: FUZZ stresser with data model binary (578 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (2 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: Very big payload random access (2315 ms) [8/91 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: BRPOPLPUSH timeout (1012 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: XCLAIM same consumer (203 ms) [ok]: XADD mass insertion and XLEN (2099 ms) [ok]: XADD with ID 0-0 (1 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2102 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (130 ms) [ok]: FUZZ stresser with data model alpha (605 ms) [ok]: WATCH will consider touched expired keys (1106 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (300 ms) [ok]: MULTI / EXEC is not propagated (single write command) (59 ms) [ok]: Hash fuzzing #2 - 512 fields (945 ms) [ok]: XRANGE can be used to iterate the whole stream (378 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (605 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (102 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: Big Quicklist: SORT BY key (592 ms) [ok]: XAUTOCLAIM as an iterator (204 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (3 ms) [ok]: XAUTOCLAIM with XDEL and count (3 ms) [ok]: XAUTOCLAIM with out of range count (1 ms) [ok]: Big Quicklist: SORT BY key with limit (17 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: XCLAIM with trimming (3 ms) [ok]: XINFO FULL output (11 ms) [ok]: FUZZ stresser with data model compr (598 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (2 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: Consumer seen-time and active-time (209 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (3 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: XREADGROUP with NOACK creates consumer (4 ms) [ok]: BGSAVE (103 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (1 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (106 ms) [ok]: ZDIFF fuzzing - listpack (3869 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1584 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (1 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (1 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (1 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: ZLEXCOUNT advanced - skiplist (2 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: Consumer group read counter and lag sanity (4 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (8 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: Consumer group lag with XDELs (7 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (4 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (12 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (1 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: MULTI and script timeout (405 ms) [ok]: Big Quicklist: SORT BY hash field (616 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (1 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: SDIFF fuzzing (3617 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (8 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (8 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (3 ms) [ok]: SPOP with - intset (3 ms) [ok]: SPOP with - hashtable (3 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (3 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (2 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (104 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (87 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (19 ms) [ok]: Hash table: SORT BY key (12 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: SRANDMEMBER with - intset (24 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (105 ms) [ok]: Hash table: SORT BY hash field (12 ms) [ok]: SRANDMEMBER with - hashtable (26 ms) [ok]: SRANDMEMBER histogram distribution - listpack (83 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (1383 ms) [ok]: EXEC and script timeout (404 ms) [ok]: SRANDMEMBER histogram distribution - intset (68 ms) [ok]: Check consistency of different data types after a reload (694 ms) [ok]: Hash ziplist of various encodings (95 ms) [ok]: Hash ziplist of various encodings - sanitize dump (3 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (74 ms) [9/91 done]: unit/type/hash (4 seconds) Testing unit/acl [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (105 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (4 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (1 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (1 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (1 ms) [ok]: Test password hashes validate input (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (1 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any channel (2 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: Same dataset digest if saving/reloading as AOF? (224 ms) [ok]: By default, only default user is able to subscribe to any pattern (2 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (2 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (4 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (17 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (6 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (3 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (3 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (1 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (1 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (4 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1766 ms) [ok]: ACL-Metrics invalid channels accesses (3 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (105 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (1 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (104 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: default: load from include file, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (3 ms) [ok]: ACL load and save with restricted channels (3 ms) [10/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl-v2 [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: BLPOP: timeout (1071 ms) [ok]: BLPOP: arguments are empty (2 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: Test basic multiple selectors (2 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (0 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: just EXEC and script timeout (402 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: exec with write commands and state change (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (2 ms) [ok]: exec with read commands and stale replica state change (2 ms) [ok]: Single channel is valid (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (3 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Blocking commands ignores the timeout (2 ms) [ok]: Test ACL list idempotency (2 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (4 ms) [ok]: Existence test commands are not marked as access (2 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (2 ms) [ok]: Cardinality commands require some type of permission to execute (3 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (3 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (2 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (1 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: MULTI propagation of PUBLISH (94 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: Test behavior of loading ACLs (0 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [ok]: MULTI propagation of EVAL (100 ms) [11/91 done]: unit/acl-v2 (0 seconds) Testing unit/latency-monitor [ok]: MULTI propagation of SCRIPT FLUSH (102 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (1 ms) [ok]: MULTI propagation of XREADGROUP (102 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: XREAD with non empty second stream (1095 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (0 ms) [ok]: Redis should actively expire keys incrementally (605 ms) [ok]: MULTI with BGREWRITEAOF (206 ms) [ok]: Blocking XREAD will not reply with an empty array (109 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (2 ms) [ok]: XDEL basic test (2 ms) [ok]: XDEL multiply id test (2 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (3 ms) [ok]: Test loading duplicate users in config on startup (16 ms) [ok]: MULTI with config set appendonly (208 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: BRPOP: timeout (1075 ms) [ok]: BRPOP: arguments are empty (2 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: MULTI with FLUSHALL and AOF (2 ms) [12/91 done]: unit/multi (5 seconds) Testing integration/block-repl [ok]: ACL from config file and config rewrite (205 ms) [13/91 done]: unit/acl (2 seconds) Testing integration/replication [ok]: SETNX against expired volatile key (2773 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (1 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: GETDEL propagate as DEL command to replica (64 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (17 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (1 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (1 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2108 ms) [ok]: Redis should lazy expire keys (1003 ms) [ok]: Big Hash table: SORT BY key (545 ms) [ok]: Big Hash table: SORT BY key with limit (18 ms) [ok]: BLMPOP_LEFT: timeout (1076 ms) [ok]: BLMPOP_LEFT: arguments are empty (3 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (2 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SETBIT fuzzing (470 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: First server should have role slave after SLAVEOF (1003 ms) [ok]: Big Hash table: SORT BY hash field (549 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (3 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (10 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (1 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (28 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (34 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (928 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: SORT speed, 100 element list directly, 100 times (19 ms) [ok]: SORT speed, 100 element list BY , 100 times (16 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: ZDIFF fuzzing - skiplist (3903 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: LTRIM stress testing - quicklist (7965 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (2 ms) [14/91 done]: unit/sort (8 seconds) Testing integration/replication-2 [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (2 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (2 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: ZMPOP propagate as pop with count command to replica (19 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (2 ms) [ok]: XDEL fuzz test (1923 ms) [ok]: APPEND fuzzing (275 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (197 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: FLUSHDB (60 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: GETRANGE fuzzing (933 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (1 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (1 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [15/91 done]: unit/type/string (8 seconds) Testing integration/replication-3 [ok]: BLMPOP_RIGHT: timeout (1069 ms) [ok]: BLMPOP_RIGHT: arguments are empty (4 ms) [ok]: BLPOP inside a transaction (2 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (199 ms) [ok]: ZMPOP readraw in RESP2 (3 ms) [ok]: BLMPOP propagate as pop with count command to replica (194 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (42 ms) [ok]: LINSERT - quicklist (46 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (4 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: BZMPOP readraw in RESP2 (198 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: LINDEX consistency test - listpack (111 ms) [ok]: LINDEX random access - listpack (68 ms) [ok]: Don't rehash if redis has child process (518 ms) [ok]: ZUNIONSTORE result is sorted (162 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (57 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (109 ms) [ok]: ZMSCORE - listpack (55 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (2 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (67 ms) [ok]: Process title set as expected (2 ms) [ok]: LINDEX consistency test - listpack (179 ms) [ok]: ZSET sorting stresser - listpack (80 ms) [16/91 done]: unit/other (8 seconds) Testing integration/replication-4 [ok]: SCAN regression test for issue #4906 (8465 ms) [17/91 done]: unit/scan (9 seconds) Testing integration/replication-psync [ok]: LINDEX random access - listpack (93 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8899 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (190 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: LINDEX consistency test - quicklist (70 ms) [ok]: LINDEX random access - quicklist (45 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (89 ms) [ok]: LINDEX consistency test - quicklist (118 ms) [ok]: LINDEX random access - quicklist (70 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (136 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (45 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2024 ms) [ok]: LMOVE left left base case - quicklist (45 ms) [ok]: LMOVE left right base case - quicklist (43 ms) [ok]: LMOVE right left base case - quicklist (46 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (57 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (8 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (46 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (93 ms) [ok]: Detect write load to master (1001 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (91 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (294 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (99 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (86 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (1 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (87 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (86 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (44 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2827 ms) [ok]: min-slaves-to-write is ignored by slaves (2 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (43 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (41 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (44 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (44 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (42 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (87 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (2 ms) [ok]: Mass RPOP/LPOP - listpack (50 ms) [ok]: Mass RPOP/LPOP - listpack (94 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (135 ms) [ok]: LMPOP multiple existing lists - quicklist (176 ms) [ok]: LMPOP single existing list - listpack (5 ms) [ok]: LMPOP multiple existing lists - listpack (6 ms) [ok]: LMPOP propagate as pop with count command to replica (86 ms) [ok]: LRANGE basics - quicklist (43 ms) [ok]: LRANGE inverted indexes - quicklist (43 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (2985 ms) [ok]: LRANGE out of range negative end index - quicklist (43 ms) [ok]: LRANGE basics - listpack (2 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (1 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (211 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (338 ms) [ok]: LTRIM basics - quicklist (524 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2005 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (28 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (3710 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: LTRIM out of range negative end index - quicklist (86 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (72 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: LSET - quicklist (44 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (12 ms) [ok]: LTRIM out of range negative end index - listpack (2 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (1 ms) [ok]: LSET against non list value (0 ms) [18/91 done]: unit/latency-monitor (8 seconds) Testing integration/replication-buffer [ok]: Redis should not propagate the read command on lazy expire (95 ms) [ok]: LREM remove all the occurrences - quicklist (43 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (42 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: BLPOP/BLMOVE should increase dirty (4 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: client unblock tests (6 ms) [ok]: client unblock tests (3 ms) [ok]: List listpack -> quicklist encoding conversion (4 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: MASTER and SLAVE consistency with expire (4445 ms) [ok]: List listpack -> quicklist encoding conversion (173 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (48 ms) [19/91 done]: unit/expire (13 seconds) Testing integration/shutdown [ok]: List quicklist -> listpack encoding conversion (224 ms) [ok]: List encoding conversion when RDB loading (8 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (772 ms) [ok]: List invalid list-max-listpack-size config (93 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: List of various encodings (93 ms) [ok]: List of various encodings - sanitize dump (5 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (4 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (2 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (101 ms) [20/91 done]: unit/type/list (14 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (1 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Short read: Server should have logged an error (0 ms) [ok]: Short read: Utility should confirm the AOF is not valid (5 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (6 ms) [ok]: Short read: Utility should be able to fix the AOF (5 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: Test replication with parallel clients writing in different DBs (5359 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (10358 ms) [ok]: SMOVE basics - from regular set to intset (3 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (2 ms) [ok]: XRANGE fuzzing (6883 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: XTRIM with MAXLEN option basic test (125 ms) [ok]: XADD with LIMIT consecutive calls (16 ms) [ok]: XTRIM with ~ is limited (16 ms) [ok]: XTRIM without ~ is not limited (16 ms) [ok]: XTRIM without ~ and with LIMIT (15 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1984 ms) [ok]: MIGRATE cached connections are released after some time (15001 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (11 ms) [ok]: All replicas share one global replication buffer (66 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: MIGRATE is able to migrate a key between two instances (219 ms) [ok]: XADD with MINID > lastid can propagate correctly (14 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: MIGRATE is able to copy a key between two instances (219 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (11 ms) [ok]: LTRIM stress testing - listpack (7942 ms) [21/91 done]: unit/type/list-2 (16 seconds) Testing integration/aof-race [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (217 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (9 ms) [ok]: MIGRATE propagates TTL correctly (217 ms) [ok]: XADD with ~ MINID can propagate correctly (14 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (12 ms) [22/91 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [ok]: intsets implementation stress testing (1572 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (15 ms) [23/91 done]: unit/type/set (16 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when some file missing (108 ms) [ok]: ZMSCORE - skiplist (16 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (16 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (9 ms) [ok]: ZSET sorting stresser - skiplist (24 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (111 ms) [ok]: test old version rdb file (0 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (109 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (109 ms) [ok]: RDB encoding loading test (7 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (111 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (2 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (109 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1923 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (108 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (110 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (3 ms) [ok]: GETSET replication (3 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (3 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Empty stream can be rewrite into AOF correctly (103 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (109 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (104 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6407 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (6554 ms) [ok]: Multi Part AOF can start when no aof and no manifest (127 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Test RDB stream encoding (156 ms) [ok]: Test RDB stream encoding - sanitize dump (11 ms) [24/91 done]: unit/type/stream (18 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can start when we have en empty AOF dir (120 ms) [25/91 done]: integration/replication-2 (10 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1182 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (122 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: corrupt payload: #7445 - with sanitize (216 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (123 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2724 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (124 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (219 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8982 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1821 ms) [ok]: corrupt payload: invalid zlbytes header (217 ms) [ok]: Test FLUSHALL aborts bgsave (366 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (323 ms) [ok]: bgsave resets the change counter (103 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (166 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: corrupt payload: valid zipped hash header, dup records (219 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (325 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (257 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (17 ms) [ok]: corrupt payload: quicklist big ziplist prev len (218 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (126 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (127 ms) [ok]: Shutting down master waits for replica timeout (1974 ms) [ok]: corrupt payload: quicklist small ziplist prev len (218 ms) [ok]: Replication of an expired key does not delete the expired key (514 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (117 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: Writable replica doesn't return expired keys (103 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: corrupt payload: quicklist ziplist wrong count (219 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (617 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [26/91 done]: integration/replication-3 (11 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (104 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: corrupt payload: #3080 - quicklist (215 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (106 ms) [ok]: client freed during loading (1033 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: corrupt payload: quicklist with empty ziplist (218 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1871 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (629 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (215 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (321 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: quicklist listpack entry start with EOF (216 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (459 ms) [ok]: Test RDB load info (525 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (0 ms) [ok]: Shutting down master waits for replica then fails (1248 ms) [ok]: BLMOVE (left, right) replication, list exists (1004 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (223 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (3 ms) [ok]: corrupt payload: #3080 - ziplist (217 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (0 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (108 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (222 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (222 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: AOF fsync always barrier issue (5366 ms) [ok]: Shutting down master waits for replica then aborted (521 ms) [29/91 done]: integration/shutdown (8 seconds) Testing integration/logging [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (223 ms) [ok]: Crash report generated on SIGABRT (2 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: GETEX should not append to AOF (0 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [31/91 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: corrupt payload: listpack invalid size header (219 ms) [ok]: AOF enable will create manifest file (555 ms) [ok]: Unknown command: Server should have logged an error (0 ms) [ok]: corrupt payload: listpack too long entry len (122 ms) [ok]: BLMOVE (right, left) replication, list exists (1003 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (2 ms) [ok]: corrupt payload: listpack very long entry len (123 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (102 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: corrupt payload: listpack too long entry prev len (218 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: corrupt payload: stream with duplicate consumers (218 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: corrupt payload: hash ziplist with duplicate records (220 ms) [ok]: corrupt payload: hash listpack with duplicate records (221 ms) [ok]: Generate timestamp annotations in AOF (326 ms) [ok]: Test child sending info (1924 ms) [ok]: BLMOVE (right, right) replication, list exists (1003 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (124 ms) [ok]: PSYNC2 #3899 regression: setup (1004 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (4 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: BLPOP followed by role change, issue #2473 (204 ms) [ok]: corrupt payload: hash ziplist uneven record count (219 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: BZMPOP propagate as pop with count command to replica (188 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (4 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1497 ms) [ok]: corrupt payload: hash duplicate records (215 ms) [ok]: Truncate AOF to specific timestamp (498 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (0 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: failed bgsave prevents writes (235 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (1 ms) [32/91 done]: integration/rdb (7 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: hash empty zipmap (216 ms) [ok]: FLUSHDB / FLUSHALL should replicate (96 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (1 ms) [ok]: MIGRATE can correctly transfer large values (7037 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (122 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (122 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (620 ms) [ok]: MIGRATE can correctly transfer hashes (217 ms) [ok]: ZSET skiplist order consistency when elements are moved (824 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (1 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (217 ms) [ok]: ZRANDMEMBER - listpack (8 ms) [ok]: ZRANDMEMBER - skiplist (8 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (1 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: AOF enable/disable auto gc (208 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3160 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: AOF can produce consecutive sequence number after reload (97 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (220 ms) [ok]: ZRANDMEMBER with - skiplist (233 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (218 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (333 ms) [ok]: MIGRATE timeout actually works (633 ms) [ok]: ZRANDMEMBER with - listpack (229 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (16 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [33/91 done]: unit/type/zset (24 seconds) Testing integration/psync2-master-restart [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: corrupt payload: fuzzer findings - hash crash (226 ms) [ok]: MIGRATE can migrate multiple keys at once (217 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: PSYNC2 pingoff: setup (1003 ms) [ok]: PSYNC2 pingoff: write and wait replication (0 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (1473 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (217 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (216 ms) [ok]: AOF will trigger limit when AOFRW fails many times (615 ms) [ok]: EVAL can process writes from AOF in read-only replicas (225 ms) [ok]: Test redis-check-aof for old style resp AOF (5 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (216 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (8 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (7 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (218 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (5 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (11 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (6 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1123 ms) [34/91 done]: integration/replication-buffer (12 seconds) Testing integration/failover [ok]: FLUSHDB / FLUSHALL should persist in AOF (5 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (226 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (216 ms) [35/91 done]: integration/aof (11 seconds) Testing integration/redis-cli [ok]: corrupt payload: fuzzer findings - empty intset (216 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (216 ms) [36/91 done]: unit/dump (25 seconds) Testing integration/redis-benchmark [ok]: failover command fails without connected replica (0 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: setup replication for following tests (103 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: Interactive CLI: Bulk reply (60 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (113 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (215 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: benchmark: set,get (5 ms) [ok]: benchmark: connecting using URI set,get (5 ms) [ok]: benchmark: connecting using URI with authentication set,get (5 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (22827 ms) [ok]: benchmark: full test suite (88 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (217 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (217 ms) [ok]: Interactive CLI: Parsing quotes (425 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (215 ms) [ok]: benchmark: multi-thread set,get (508 ms) [ok]: failover command to specific replica works (746 ms) [ok]: benchmark: pipelined full set,get (81 ms) [ok]: benchmark: arbitrary command (6 ms) [ok]: benchmark: keyspace length (19 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (215 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (8006 ms) [37/91 done]: integration/redis-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: Interactive CLI: Subscribed mode (605 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (217 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (121 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (216 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (415 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (2 ms) [ok]: Non-interactive TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (13 ms) [ok]: Non-interactive non-TTY CLI: Status reply (1 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (2 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (121 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8513 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (10 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (10 ms) [ok]: failover command to any replica works (934 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1118 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (217 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (217 ms) [ok]: failover to a replica with force works (429 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (120 ms) [ok]: dismiss all data types memory (1112 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2794 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (215 ms) [ok]: Detect write load to master (1001 ms) [38/91 done]: integration/aof-multi-part (12 seconds) Testing unit/pubsub [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9866 ms) [ok]: dismiss client output buffer (328 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (2 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (217 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: failover with timeout aborts if replica never catches up (563 ms) [ok]: PubSub messages with CLIENT REPLY OFF (86 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: failovers can be aborted (25 ms) [ok]: Keyspace notifications: we receive keyspace notifications (47 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: dismiss client query buffer (203 ms) [ok]: Keyspace notifications: we receive keyevent notifications (43 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (215 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (121 ms) [ok]: Keyspace notifications: expired events (background expire) (193 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (2 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (217 ms) [39/91 done]: unit/pubsub (0 seconds) Testing unit/pubsubshard [ok]: failover aborts if target rejects sync request (530 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1438 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (217 ms) [ok]: PubSubShard with CLIENT REPLY OFF (84 ms) [ok]: corrupt payload: fuzzer findings - huge string (217 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (216 ms) [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (122 ms) [ok]: dismiss replication backlog (1221 ms) [40/91 done]: integration/dismiss-mem (3 seconds) Testing unit/slowlog [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (216 ms) [ok]: Dumping an RDB - functions only: no (2478 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (122 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [41/91 done]: integration/failover (4 seconds) Testing unit/scripting [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - max entries is correctly handled (9 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (3 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (2 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (217 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (2 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (2 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (5 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (204 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (2 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [42/91 done]: unit/pubsubshard (2 seconds) Testing unit/functions [ok]: corrupt payload: fuzzer findings - empty quicklist (227 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (1 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (1 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (2 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (0 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: FUNCTION - test function dump and restore with replace argument (0 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (1 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (1 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - empty zset (218 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: Make the old master a replica of the new one and check conditions (1005 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (217 ms) [ok]: Dumping an RDB - functions only: yes (1007 ms) [ok]: FUNCTION - test function kill (403 ms) [ok]: Scan mode (64 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (2031 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (215 ms) [ok]: SLOWLOG - can be disabled (401 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 45080) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [43/91 done]: unit/slowlog (2 seconds) Testing unit/maxmemory [44/91 done]: integration/psync2-master-restart (7 seconds) Testing unit/introspection [ok]: EVAL does not leak in the Lua stack (913 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (2 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (217 ms) [ok]: FUNCTION - test script kill not working on function (404 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (1 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (54 ms) [ok]: Script return recursive object (169 ms) [ok]: CLIENT KILL close the client connection during bgsave (97 ms) [ok]: Script check unpack with massive arguments (38 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (215 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (44 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (46 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (46 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (2 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR log blocked command only once (2 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (1 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (121 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (2 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (350 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (121 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (216 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (68 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (217 ms) [ok]: Timedout script does not cause a false dead client (54 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (1 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Timedout script link is still usable after Lua returns (88 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (656 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (219 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (76 ms) [ok]: CONFIG save params special case handled properly (867 ms) [ok]: CONFIG sanity (19 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (220 ms) [ok]: Timedout scripts and unblocked command (334 ms) [ok]: CONFIG REWRITE sanity (188 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (351 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (220 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (220 ms) [45/91 done]: integration/corrupt-dump (14 seconds) Testing unit/introspection-2 [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Connecting as a replica (2157 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (323 ms) [ok]: Replication: commands with many arguments (issue #1221) (13295 ms) [46/91 done]: integration/block-repl (27 seconds) Testing unit/limits [ok]: CONFIG REWRITE handles save and shutdown properly (659 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (4 ms) [ok]: CONFIG GET multiple args (0 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (1 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (1 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (0 ms) [ok]: LIBRARIES - delete removed all functions on library (1 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: spopwithcount rewrite srem command (86 ms) [ok]: redis-server command line arguments - error cases (66 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (665 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (216 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (0 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (217 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (1 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (242 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (0 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (218 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (1 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (1 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (2 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (1 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (1 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [47/91 done]: unit/functions (4 seconds) Testing unit/obuf-limits [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (216 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: CONFIG SET client-output-buffer-limit (3 ms) [ok]: Check if maxclients works refusing connections (907 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (482 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (1 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: Piping raw protocol (1540 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (10 ms) [ok]: DUMP RESTORE with -X option (9 ms) [49/91 done]: integration/redis-cli (9 seconds) Testing unit/bitfield [ok]: Replication of SPOP command -- alsoPropagate() API (1351 ms) [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (0 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: BITCOUNT fuzzing without start/end (294 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (602 ms) [ok]: BITFIELD overflow detection fuzzing (221 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3529 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (3 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: BITFIELD overflow wrap fuzzing (326 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: redis-server command line arguments - save with empty input (1079 ms) [ok]: BITCOUNT fuzzing with start/end (507 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (1 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (1 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [50/91 done]: integration/replication-4 (26 seconds) Testing unit/geo [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (1 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (1 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (1 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (0 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (0 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (1 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (214 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (670 ms) [ok]: BITOP and fuzzing (287 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: BITFIELD: setup slave (102 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (186 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (11 ms) [ok]: SCRIPTING FLUSH ASYNC (8 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (0 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: BITOP or fuzzing (261 ms) [51/91 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: cannot modify protected configuration - local (6 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: EVAL does not leak in the Lua stack (406 ms) [ok]: BITOP xor fuzzing (313 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (71 ms) [ok]: BITOP NOT fuzzing (24 ms) [ok]: BITOP with integer encoded source objects (0 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (6 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (2 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (5 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (662 ms) [ok]: MGET: mget shouldn't be propagated in Lua (101 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: Memory efficiency with values in range 32 (461 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (263 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (325 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (549 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (325 ms) [ok]: Script return recursive object (130 ms) [ok]: ziplist implementation: value encoding and backlink (9603 ms) [ok]: Script check unpack with massive arguments (40 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Memory efficiency with values in range 64 (463 ms) [ok]: config during loading (961 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (292 ms) [52/91 done]: unit/bitops (3 seconds) Testing unit/hyperloglog [ok]: CONFIG REWRITE handles rename-command properly (336 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (524 ms) [ok]: Memory efficiency with values in range 128 (449 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (52 ms) [ok]: Timedout script does not cause a false dead client (50 ms) [ok]: Timedout script link is still usable after Lua returns (86 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9723 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (618 ms) [ok]: CONFIG REWRITE handles alias config properly (670 ms) [53/91 done]: unit/introspection (6 seconds) Testing unit/lazyfree [ok]: Memory efficiency with values in range 1024 (642 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9936 ms) [54/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/wait [ok]: Timedout scripts and unblocked command (384 ms) [ok]: HyperLogLog self test passes (948 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: UNLINK can reclaim memory in background (268 ms) [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (679 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (318 ms) [ok]: HyperLogLogs are promote from sparse to dense (496 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (64 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2918 ms) [ok]: lazy free a stream with all types of metadata (108 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [55/91 done]: unit/lazyfree (1 seconds) Testing unit/pause [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: TOUCH alters the last access time of a key (3003 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (344 ms) [ok]: Detect write load to master (1001 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (717 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: Test both active and passive expires are skipped during client pause (103 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1078 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: HyperLogLog sparse encoding stress test (932 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: Test when replica paused, offset would not grow (3 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [56/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/querybuf [57/91 done]: unit/pause (1 seconds) Testing unit/tls [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Memory efficiency with values in range 16384 (2016 ms) [58/91 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (777 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 96874) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [59/91 done]: unit/memefficiency (5 seconds) Testing unit/oom-score-adj [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: Clients are able to enable tracking and redirect it (1 ms) [ok]: The other connection is able to get invalidations (0 ms) [ok]: The client is now able to disable tracking (1 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (1 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (2 ms) [ok]: command stats for scripts (2 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (1 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (3 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (1 ms) [ok]: CONFIG SET oom-score-adj works as expected (15 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (2 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (1 ms) [60/91 done]: unit/introspection-2 (8 seconds) Testing unit/shutdown [61/91 done]: unit/oom-score-adj (0 seconds) Testing unit/networking [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (116 ms) [ok]: CONFIG SET port number (221 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1104 ms) [ok]: Client output buffer hard limit is enforced (6367 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (13 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (648 ms) [ok]: Temp rdb will be deleted in signal handle (84 ms) [ok]: CONFIG SET bind address (216 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: RDB save will be failed in shutdown (3 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (98 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (1 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (101 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Tracking gets notification of lazy expired keys (102 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (2 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (2 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: CONFIG SET bind-source-addr (519 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Tracking invalidation message of eviction keys should be before response (3 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: Tracking gets notification on tracking table key eviction (64 ms) [ok]: Invalidation message received for flushall (2 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Test ASYNC flushall (3 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: client evicted due to large argv (143 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (846 ms) [ok]: Default bind address configuration handling (213 ms) [ok]: Protected mode works as expected (6 ms) [ok]: client evicted due to large query buf (67 ms) [ok]: client evicted due to percentage of maxmemory (13 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (201 ms) [ok]: no-writes shebang flag on replica (106 ms) [ok]: Tracking info is correct (3 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (10 ms) [ok]: RESP2 based basic invalidation with client reply off (44 ms) [63/91 done]: unit/networking (1 seconds) Testing unit/violations [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: client evicted due to large multi buf (91 ms) [ok]: not enough good replicas (1 ms) [ok]: SORT adds integer field to list (1 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [64/91 done]: unit/violations (0 seconds) Testing unit/replybufsize [65/91 done]: unit/tracking (1 seconds) Testing unit/cluster/announced-endpoints [ok]: query buffer resized correctly (2120 ms) [ok]: WAITAOF local copy before fsync (94 ms) [ok]: query buffer resized correctly when not idle (75 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: client evicted due to watched key list (423 ms) [ok]: not enough good replicas state change during long script (618 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (6 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (852 ms) [ok]: Consistent eval error reporting (13 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [66/91 done]: unit/scripting (13 seconds) Testing unit/cluster/misc [ok]: verify reply buffer limits (650 ms) [67/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/cli [ok]: PSYNC2 #3899 regression: verify consistency (45 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (1 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (772 ms) [ok]: WAITAOF local copy everysec (1202 ms) [ok]: WAITAOF local copy with appendfsync always (0 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (19341 ms) [ok]: WAITAOF local if AOFRW was postponed (302 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (2 ms) [68/91 done]: integration/psync2-reg (22 seconds) Testing unit/cluster/scripting [ok]: WAITAOF replica copy before fsync (79 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (804 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: client evicted due to pubsub subscriptions (2153 ms) [ok]: client evicted due to tracking redirection (112 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (102 ms) [ok]: WAITAOF replica copy everysec (714 ms) [ok]: Test change cluster-announce-bus-port at runtime (203 ms) [69/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/hostnames [ok]: query buffer resized correctly with fat argv (2933 ms) [70/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/human-announced-nodename [ok]: Client output buffer soft limit is enforced if time is overreached (4448 ms) [ok]: Key lazy expires during key migration (13 ms) [ok]: Coverage: Basic cluster commands (2 ms) [ok]: Create 3 node cluster (2020 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (6 ms) [ok]: Verify command got unblocked after resharding (43 ms) [ok]: Wait for cluster to be stable (12 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1004 ms) [ok]: ziplist implementation: encoding stress testing (8798 ms) [71/91 done]: unit/type/list-3 (45 seconds) Testing unit/cluster/multi-slot-operations [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (0 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (1 ms) [72/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/slot-ownership [73/91 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/links [ok]: Kill a cluster node and wait for fail state (1620 ms) [ok]: Verify command got unblocked after cluster failure (2 ms) [ok]: Set cluster human announced nodename and let it propagate (107 ms) Port 24162 was already busy, trying another port... [ok]: WAITAOF replica copy everysec with slow AOFRW (2014 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (103 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: Set cluster hostnames and verify they are propagated (210 ms) [ok]: Update hostnames and make sure they are all eventually propagated (215 ms) [ok]: Continuous slots distribution (14 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (2 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (11 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (211 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (106 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (109 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (210 ms) [ok]: WAITAOF replica copy if replica is blocked (893 ms) [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9655 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 143107) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1003 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5038 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: No response for single command if client output buffer hard limit is enforced (130 ms) [ok]: WAITAOF on promoted replica (601 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (104 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3078 ms) [ok]: Human nodenames are visible in log messages (3527 ms) [ok]: Each node has two links with each peer (4 ms) [ok]: Validate cluster links format (1 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [77/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1047 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (22 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (60 ms) [ok]: Obuf limit, KEYS stopped mid-run (87 ms) [78/91 done]: unit/obuf-limits (17 seconds) [ok]: Detect write load to master (1002 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3620 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2003 ms) [ok]: Test restart will keep hostname information (162 ms) [ok]: Test hostname validation (0 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (403 ms) [79/91 done]: unit/cluster/hostnames (8 seconds) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: client evicted due to client tracking prefixes (8816 ms) [ok]: client evicted due to output buf (15 ms) [ok]: client no-evict on (86 ms) [ok]: GEOSEARCH fuzzy test - byradius (17913 ms) [ok]: client no-evict off (59 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: WAITAOF replica isn't configured to do AOF (103 ms) [ok]: avoid client eviction when client is freed by output buffer limit (177 ms) [ok]: Verify that single primary marks replica as failed (3148 ms) [ok]: decrease maxmemory-clients causes client eviction (576 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (901 ms) [ok]: evict clients only until below limit (240 ms) [ok]: Migrate the last slot away from a node using redis-cli (3936 ms) [ok]: evict clients in right order (large to small) (251 ms) Port 24174 was already busy, trying another port... [ok]: client total memory grows during client no-evict (127 ms) [ok]: client total memory grows during maxmemory-clients disabled (128 ms) [80/91 done]: unit/client-eviction (14 seconds) [ok]: WAITAOF master sends PING after last write (1202 ms) [ok]: WAITAOF master client didn't send any write command (1202 ms) [ok]: redis-cli --cluster create with cluster-port (1935 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 184159) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 5 --- (1 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6529 ms) [ok]: redis-cli --cluster add-node with cluster-port (1102 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [81/91 done]: unit/cluster/cli (17 seconds) [ok]: Disconnect link when send buffer limit reached (9007 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: Link memory increases with publishes (596 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (1 ms) [ok]: Link memory resets after publish messages flush (538 ms) [82/91 done]: unit/cluster/links (15 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3332 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Verify that multiple primaries mark replica as failed (6148 ms) [83/91 done]: unit/cluster/failure-marking (14 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2333 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1327 ms) [ok]: setup replication for following tests (103 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (21917 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (673 ms) [84/91 done]: unit/wait (28 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (8018 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 224561) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (4 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (191 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: GEOSEARCH fuzzy test - bybox (14486 ms) [ok]: GEOSEARCH box edges fuzzy test (37 ms) [85/91 done]: unit/geo (32 seconds) [86/91 done]: integration/psync2 (47 seconds) [ok]: Detect write load to master (1002 ms) [ok]: AOF rewrite during write load: RDB preamble=no (44079 ms) [ok]: Turning off AOF kills the background writing child if any (105 ms) [ok]: AOF rewrite of list with listpack encoding, string data (106 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (201 ms) [ok]: AOF rewrite of list with listpack encoding, int data (106 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (206 ms) [ok]: AOF rewrite of set with intset encoding, string data (107 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (336 ms) [ok]: AOF rewrite of set with intset encoding, int data (56 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (234 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (107 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (193 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (105 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (231 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (57 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (213 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (106 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (214 ms) [ok]: AOF rewrite functions (55 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (218 ms) [ok]: BGREWRITEAOF is refused if already in progress (10 ms) [87/91 done]: unit/aofrw (71 seconds) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9698 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (1002 ms) [ok]: slave buffer are counted correctly (37050 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (47409 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9707 ms) [ok]: replica buffer don't induce eviction (7956 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (249 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (23225 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (60 ms) [ok]: client tracking don't cause eviction feedback loop (1384 ms) [ok]: propagation with eviction (97 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: lru/lfu value of the key just added (2 ms) [88/91 done]: unit/maxmemory (61 seconds) [ok]: Slave should be able to synchronize with the master (1814 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (7970 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (2205 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (900 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [89/91 done]: unit/hyperloglog (61 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6518 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (8081 ms) [ok]: Slave should be able to synchronize with the master (1816 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (22609 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9754 ms) [ok]: Slave should be able to synchronize with the master (1817 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (10881 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (100 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (26095 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (440 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6476 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (1 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (343 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (884 ms) [ok]: Busy script during async loading (895 ms) [ok]: Blocked commands and configs during async-loading (443 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (1 ms) Waiting for process 30415 to exit... Waiting for process 30415 to exit... Waiting for process 30415 to exit... Waiting for process 30415 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (8094 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9709 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9773 ms) [90/91 done]: integration/replication-psync (165 seconds) Waiting for process 30996 to exit... [ok]: diskless loading short read (26334 ms) [ok]: diskless no replicas drop during rdb pipe (7891 ms) [ok]: diskless slow replicas drop during rdb pipe (3955 ms) [ok]: diskless fast replicas drop during rdb pipe (6542 ms) [ok]: diskless all replicas drop during rdb pipe (1737 ms) [ok]: diskless timeout replicas drop during rdb pipe (6559 ms) [ok]: diskless replication child being killed is collected (1533 ms) [ok]: replication child dies when parent is killed - diskless: yes (1162 ms) [ok]: replication child dies when parent is killed - diskless: no (1466 ms) [ok]: diskless replication read pipe cleanup (970 ms) [ok]: replicaof right after disconnection (1833 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (933 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (3 ms) [ok]: Discard cache master before loading transferred RDB when full sync (111 ms) [ok]: replica can handle EINTR if use diskless load (651 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (96 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (147 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (59 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (107 ms) [ok]: PSYNC with wrong offset should throw error (2 ms) [ok]: Test replication with lazy expire (114 ms) [91/91 done]: integration/replication (210 seconds) Testing solo test [91/91 done]: list-large-memory (1 seconds) Testing solo test [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (2 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/type/incr 0 seconds - unit/info-command 0 seconds - unit/protocol 1 seconds - unit/keyspace 1 seconds - unit/auth 2 seconds - unit/info 0 seconds - unit/quit 4 seconds - unit/type/hash 5 seconds - unit/type/stream-cgroups 0 seconds - unit/acl-v2 5 seconds - unit/multi 2 seconds - unit/acl 8 seconds - unit/sort 8 seconds - unit/type/string 8 seconds - unit/other 9 seconds - unit/scan 8 seconds - unit/latency-monitor 13 seconds - unit/expire 14 seconds - unit/type/list 16 seconds - unit/type/list-2 0 seconds - integration/aof-race 16 seconds - unit/type/set 18 seconds - unit/type/stream 10 seconds - integration/replication-2 11 seconds - integration/replication-3 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 8 seconds - integration/shutdown 1 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 7 seconds - integration/rdb 24 seconds - unit/type/zset 12 seconds - integration/replication-buffer 11 seconds - integration/aof 25 seconds - unit/dump 1 seconds - integration/redis-benchmark 12 seconds - integration/aof-multi-part 0 seconds - unit/pubsub 3 seconds - integration/dismiss-mem 4 seconds - integration/failover 2 seconds - unit/pubsubshard 2 seconds - unit/slowlog 7 seconds - integration/psync2-master-restart 14 seconds - integration/corrupt-dump 27 seconds - integration/block-repl 4 seconds - unit/functions 1 seconds - unit/limits 9 seconds - integration/redis-cli 26 seconds - integration/replication-4 1 seconds - unit/bitfield 3 seconds - unit/bitops 6 seconds - unit/introspection 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/lazyfree 16 seconds - integration/psync2-pingoff 1 seconds - unit/pause 1 seconds - unit/tls 5 seconds - unit/memefficiency 8 seconds - unit/introspection-2 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 1 seconds - unit/networking 0 seconds - unit/violations 1 seconds - unit/tracking 13 seconds - unit/scripting 1 seconds - unit/replybufsize 22 seconds - integration/psync2-reg 3 seconds - unit/cluster/announced-endpoints 6 seconds - unit/querybuf 45 seconds - unit/type/list-3 2 seconds - unit/cluster/scripting 4 seconds - unit/cluster/misc 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 6 seconds - unit/cluster/human-announced-nodename 17 seconds - unit/obuf-limits 8 seconds - unit/cluster/hostnames 14 seconds - unit/client-eviction 17 seconds - unit/cluster/cli 15 seconds - unit/cluster/links 14 seconds - unit/cluster/failure-marking 28 seconds - unit/wait 32 seconds - unit/geo 47 seconds - integration/psync2 71 seconds - unit/aofrw 61 seconds - unit/maxmemory 61 seconds - unit/hyperloglog 165 seconds - integration/replication-psync 210 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 0 seconds - defrag 2 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis-openrc*: Running split function openrc... >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.5-r2.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 28.0 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.5-r2.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-x86.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redis*: Package size: 3.7 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.5-r2.apk >>> redis: Build complete at Thu, 03 Oct 2024 13:03:36 +0000 elapsed time 0h 3m 58s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20241003.125939) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.2-r2) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.36.1-r32.trigger OK: 413 MiB in 117 packages >>> redis: Updating the community/x86 repository index... >>> redis: Signing the index...