>>> py3-pymupdf: Building testing/py3-pymupdf 1.26.4-r1 (using abuild 3.16.0_rc4-r0) started Fri, 14 Nov 2025 15:59:49 +0000
>>> py3-pymupdf: Validating /home/buildozer/aports/testing/py3-pymupdf/APKBUILD...
>>> py3-pymupdf: Analyzing dependencies...
>>> py3-pymupdf: Installing for build: build-base py3-mupdf mupdf-dev py3-setuptools py3-gpep517 py3-wheel python3-dev swig
( 1/44) Installing libbz2 (1.0.8-r6)
( 2/44) Installing libffi (3.5.2-r0)
( 3/44) Installing gdbm (1.26-r0)
( 4/44) Installing xz-libs (5.8.1-r0)
( 5/44) Installing mpdecimal (4.0.1-r0)
( 6/44) Installing libpanelw (6.5_p20251010-r0)
( 7/44) Installing sqlite-libs (3.51.0-r0)
( 8/44) Installing python3 (3.12.12-r0)
( 9/44) Installing python3-pycache-pyc0 (3.12.12-r0)
(10/44) Installing pyc (3.12.12-r0)
(11/44) Installing python3-pyc (3.12.12-r0)
(12/44) Installing libpng (1.6.49-r0)
(13/44) Installing freetype (2.13.3-r0)
(14/44) Installing gumbo-parser (0.13.2-r0)
(15/44) Installing libintl (0.24.1-r1)
(16/44) Installing libeconf (0.8.0-r0)
(17/44) Installing libblkid (2.41.2-r0)
(18/44) Installing libmount (2.41.2-r0)
(19/44) Installing glib (2.86.1-r0)
(20/44) Installing graphite2 (1.3.14-r6)
(21/44) Installing harfbuzz (11.3.2-r0)
(22/44) Installing jbig2dec (0.20-r0)
(23/44) Installing libjpeg-turbo (3.1.2-r0)
(24/44) Installing mujs-libs (1.3.6-r0)
(25/44) Installing openjpeg (2.5.4-r1)
(26/44) Installing mupdf-libs (1.26.11-r0)
(27/44) Installing mupdf-cpp (1.26.11-r0)
(28/44) Installing py3-mupdf (1.26.11-r0)
(29/44) Installing mupdf-dev (1.26.11-r0)
(30/44) Installing py3-parsing (3.2.3-r0)
(31/44) Installing py3-parsing-pyc (3.2.3-r0)
(32/44) Installing py3-packaging (25.0-r0)
(33/44) Installing py3-packaging-pyc (25.0-r0)
(34/44) Installing py3-setuptools (80.9.0-r2)
(35/44) Installing py3-setuptools-pyc (80.9.0-r2)
(36/44) Installing py3-installer (0.7.0-r2)
(37/44) Installing py3-installer-pyc (0.7.0-r2)
(38/44) Installing py3-gpep517 (19-r1)
(39/44) Installing py3-gpep517-pyc (19-r1)
(40/44) Installing py3-wheel (0.46.1-r0)
(41/44) Installing py3-wheel-pyc (0.46.1-r0)
(42/44) Installing python3-dev (3.12.12-r0)
(43/44) Installing swig (4.4.0-r0)
(44/44) Installing .makedepends-py3-pymupdf (20251114.155951)
busybox-1.37.0-r25.trigger: Executing script...
glib-2.86.1-r0.trigger: Executing script...
OK: 581 MiB in 149 packages
>>> py3-pymupdf: Cleaning up srcdir
>>> py3-pymupdf: Cleaning up pkgdir
>>> py3-pymupdf: Cleaning up tmpdir
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/py3-pymupdf-1.26.4.tar.gz
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/edge/py3-pymupdf-1.26.4.tar.gz.part'
py3-pymupdf-1.26.4.t 100% |********************************| 87.0M  0:00:00 ETA
'/var/cache/distfiles/edge/py3-pymupdf-1.26.4.tar.gz.part' saved
/var/cache/distfiles/edge/py3-pymupdf-1.26.4.tar.gz: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4457_a.pdf
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/edge/test_4457_a.pdf.part'
test_4457_a.pdf.part 100% |********************************| 12.5M  0:00:00 ETA
'/var/cache/distfiles/edge/test_4457_a.pdf.part' saved
/var/cache/distfiles/edge/test_4457_a.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4457_b.pdf
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/edge/test_4457_b.pdf.part'
test_4457_b.pdf.part 100% |********************************| 7845k  0:00:00 ETA
'/var/cache/distfiles/edge/test_4457_b.pdf.part' saved
/var/cache/distfiles/edge/test_4457_b.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4445.pdf
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/edge/test_4445.pdf.part'
test_4445.pdf.part   100% |********************************| 2608k  0:00:00 ETA
'/var/cache/distfiles/edge/test_4445.pdf.part' saved
/var/cache/distfiles/edge/test_4445.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4533.pdf
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
saving to '/var/cache/distfiles/edge/test_4533.pdf.part'
test_4533.pdf.part    17% |*****                           | 2895k  0:00:04 ETA
test_4533.pdf.part   100% |********************************| 16.0M  0:00:00 ETA
'/var/cache/distfiles/edge/test_4533.pdf.part' saved
/var/cache/distfiles/edge/test_4533.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/py3-pymupdf-1.26.4.tar.gz
/var/cache/distfiles/edge/py3-pymupdf-1.26.4.tar.gz: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4457_a.pdf
/var/cache/distfiles/edge/test_4457_a.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4457_b.pdf
/var/cache/distfiles/edge/test_4457_b.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4445.pdf
/var/cache/distfiles/edge/test_4445.pdf: OK
>>> py3-pymupdf: Fetching https://distfiles.alpinelinux.org/distfiles/edge/test_4533.pdf
/var/cache/distfiles/edge/test_4533.pdf: OK
>>> py3-pymupdf: Unpacking /var/cache/distfiles/edge/py3-pymupdf-1.26.4.tar.gz...
setup.py:217:<module>(): ### Starting.
setup.py:218:<module>(): os.getcwd()='/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4'
setup.py:218:<module>(): platform.machine()='i686'
setup.py:218:<module>(): platform.platform()='Linux-6.12.54-0-lts-i686-with'
setup.py:218:<module>(): platform.python_implementation()='CPython'
setup.py:218:<module>(): platform.python_version()='3.12.12'
setup.py:218:<module>(): platform.system()='Linux'
setup.py:218:<module>(): platform.uname()=uname_result(system='Linux', node='build-edge-x86', release='6.12.54-0-lts', version='#1-Alpine SMP PREEMPT_DYNAMIC 2025-10-21 06:03:21', machine='i686')
setup.py:218:<module>(): sys.executable='/usr/bin/python3'
setup.py:218:<module>(): sys.version='3.12.12 (main, Oct 11 2025, 01:16:26) [GCC 15.2.0]'
setup.py:218:<module>(): sys.version_info=sys.version_info(major=3, minor=12, micro=12, releaselevel='final', serial=0)
setup.py:218:<module>(): list(sys.version_info)=[3, 12, 12, 'final', 0]
setup.py:218:<module>(): CPU bits: 32
setup.py:218:<module>(): sys.argv (6):
setup.py:218:<module>():     0: '/usr/bin/gpep517'
setup.py:218:<module>():     1: 'build-wheel'
setup.py:218:<module>():     2: '--wheel-dir'
setup.py:218:<module>():     3: '.dist'
setup.py:218:<module>():     4: '--output-fd'
setup.py:218:<module>():     5: '3'
setup.py:218:<module>(): os.environ (49):
setup.py:218:<module>():     ABUILD_LAST_COMMIT: '6bd223d3bd03e9db85e4bc1b1e0e541480f46a5b'
setup.py:218:<module>():     APORTSDIR: '/home/buildozer/aports'
setup.py:218:<module>():     BUILDCC: 'cc'
setup.py:218:<module>():     BUILDCFLAGS: '-Os -fstack-clash-protection -Wformat -Werror=format-security'
setup.py:218:<module>():     BUILDCPPFLAGS: ''
setup.py:218:<module>():     BUILDCXX: 'c++'
setup.py:218:<module>():     BUILDCXXFLAGS: '-Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_HARDENING_MODE=_LIBCPP_HARDENING_MODE_FAST'
setup.py:218:<module>():     BUILDLD: 'ld'
setup.py:218:<module>():     BUILDLDFLAGS: '-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs'
setup.py:218:<module>():     CARGO_BUILD_JOBS: '48'
setup.py:218:<module>():     CARGO_HOME: '/home/buildozer/aports/testing/py3-pymupdf/tmp/cargo'
setup.py:218:<module>():     CARGO_PROFILE_RELEASE_CODEGEN_UNITS: '1'
setup.py:218:<module>():     CARGO_PROFILE_RELEASE_LTO: 'true'
setup.py:218:<module>():     CARGO_PROFILE_RELEASE_OPT_LEVEL: 's'
setup.py:218:<module>():     CARGO_PROFILE_RELEASE_PANIC: 'abort'
setup.py:218:<module>():     CC: 'cc'
setup.py:218:<module>():     CFLAGS: '-Os -fstack-clash-protection -Wformat -Werror=format-security'
setup.py:218:<module>():     CMAKE_BUILD_PARALLEL_LEVEL: '48'
setup.py:218:<module>():     CMAKE_GENERATOR: 'Ninja'
setup.py:218:<module>():     CTEST_NO_TESTS_ACTION: 'error'
setup.py:218:<module>():     CTEST_OUTPUT_ON_FAILURE: 'ON'
setup.py:218:<module>():     CTEST_PARALLEL_LEVEL: '48'
setup.py:218:<module>():     CXX: 'c++'
setup.py:218:<module>():     CXXFLAGS: '-Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_HARDENING_MODE=_LIBCPP_HARDENING_MODE_FAST'
setup.py:218:<module>():     DFLAGS: '-Os'
setup.py:218:<module>():     GIT_CEILING_DIRECTORIES: '/home/buildozer/aports/testing/py3-pymupdf'
setup.py:218:<module>():     GOCACHE: '/home/buildozer/aports/testing/py3-pymupdf/tmp/go'
setup.py:218:<module>():     GOFLAGS: '-buildmode=pie -modcacherw -trimpath -buildvcs=false'
setup.py:218:<module>():     GOMODCACHE: '/home/buildozer/aports/testing/py3-pymupdf/tmp/go'
setup.py:218:<module>():     GOTMPDIR: '/home/buildozer/aports/testing/py3-pymupdf/tmp'
setup.py:218:<module>():     HOME: '/home/buildozer'
setup.py:218:<module>():     JOBS: '48'
setup.py:218:<module>():     LDFLAGS: '-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs'
setup.py:218:<module>():     MAKEFLAGS: '-j48'
setup.py:218:<module>():     MQTT_EXEC_PASSWORD: 'd57lWgCDj94F'
setup.py:218:<module>():     OLDPWD: '/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4'
setup.py:218:<module>():     PATH: '/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin'
setup.py:218:<module>():     PERL_MM_USE_DEFAULT: '1'
setup.py:218:<module>():     PWD: '/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4'
setup.py:218:<module>():     PYMUPDF_SETUP_MUPDF_BUILD: ''
setup.py:218:<module>():     REPODEST: '/home/buildozer/packages/'
setup.py:218:<module>():     RUSTFLAGS: ' -Clink-arg=-Wl,-z,pack-relative-relocs'
setup.py:218:<module>():     SAMUFLAGS: '-j48'
setup.py:218:<module>():     SHLVL: '4'
setup.py:218:<module>():     SOURCE_DATE_EPOCH: '1763030895'
setup.py:218:<module>():     SRCDEST: '/var/cache/distfiles/edge'
setup.py:218:<module>():     TERM: 'vt102'
setup.py:218:<module>():     USER: 'buildozer'
setup.py:218:<module>():     git: '/usr/bin/git'
setup.py:242:<module>(): PYMUPDF_SETUP_URL_WHEEL=None
setup.py:245:<module>(): PYMUPDF_SETUP_DUMMY=None
2025-11-14 15:59:57,515 gpep517 INFO Building wheel via backend setup
pipcl.py:849:tag_platform(): From self.tag_platform_: ret=None.
pipcl.py:857:tag_platform(): From AUDITWHEEL_PLAT: ret=None.
pipcl.py:872:tag_platform(): From sysconfig.get_platform(): ret='linux_i686'.
pipcl.py:886:tag_platform(): tag_platform(): returning ret='linux_i686'.
setup.py:454:get_mupdf_internal(): get_mupdf_internal(): out='dir' location='' sha=None
setup.py:920:build_mupdf_unix(): Using system mupdf.
setup.py:640:build(): build(): mupdf_build_dir=None
setup.py:1089:_build_extension(): _build_extension(): g_py_limited_api=True defines=[]
setup.py:1097:_build_extension(): Building PyMuPDF rebased.
pipcl.py:2683:run_if(): Running command because: File does not exist: '/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp'
pipcl.py:2685:run_if(): Running: swig
pipcl.py:2685:run_if():     -Wall
pipcl.py:2685:run_if():     -c++
pipcl.py:2685:run_if():     -python
pipcl.py:2685:run_if():     -module extra
pipcl.py:2685:run_if():     -outdir /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build
pipcl.py:2685:run_if():     -o /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp
pipcl.py:2685:run_if():     -MD -MF /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp.d
pipcl.py:2685:run_if():     /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/extra.i
pipcl.py:2455:__init__(): self.includes='-I/usr/include/python3.12 -I/usr/include/python3.12'
pipcl.py:2456:__init__():     includes_='-I /usr/include/python3.12'
pipcl.py:2457:__init__(): self.ldflags='-L/usr/lib  -ldl  -lm'
pipcl.py:2458:__init__():     ldflags_='-L /usr/lib'
pipcl.py:2683:run_if(): Running command because: File does not exist: '/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/_extra.so'
pipcl.py:2685:run_if(): Running: $CXX
pipcl.py:2685:run_if():     -fPIC
pipcl.py:2685:run_if():     -shared
pipcl.py:2685:run_if():     -O2 -DNDEBUG
pipcl.py:2685:run_if():     -I/usr/include/python3.12 -I/usr/include/python3.12
pipcl.py:2685:run_if():     /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp
pipcl.py:2685:run_if():     -MD -MF /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/_extra.so.d
pipcl.py:2685:run_if():     -o /home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/_extra.so
pipcl.py:2685:run_if():      -Wall -Wno-deprecated-declarations -Wno-unused-const-variable -Os -fstack-clash-protection -Wformat -Werror=format-security -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_HARDENING_MODE=_LIBCPP_HARDENING_MODE_FAST
pipcl.py:2685:run_if():      -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs
pipcl.py:2685:run_if():     -L/usr/lib  -ldl  -lm
pipcl.py:2685:run_if():     -lmupdf -lmupdfcpp
pipcl.py:2685:run_if():     -Wl,-rpath,'$ORIGIN',-z,origin
pipcl.py:2685:run_if():     -DPy_LIMITED_API=0x030c0000
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp: In function 'void SWIG_TypeClientData(swig_type_info*, void*)':
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp:699:37: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
  699 |     for (cast = head; (cast - head) <= head->value; cast++) {
      |                       ~~~~~~~~~~~~~~^~~~~~~~~~~~~~
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp: In function 'void SWIG_PropagateClientData()':
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp:12794:41: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
12794 |         for (cast = head; (cast - head) <= head->value; cast++) {
      |                           ~~~~~~~~~~~~~~^~~~~~~~~~~~~~
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp: At global scope:
/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4/src/build/extra.i.cpp:3648:20: warning: 'std::string repr(PyObject*)' defined but not used [-Wunused-function]
 3648 | static std::string repr(PyObject* x)
      |                    ^~~~
setup.py:390:git_info(): git_info(): directory='/home/buildozer/aports/testing/py3-pymupdf/src/PyMuPDF-1.26.4' returning branch='' sha='' comment=''
setup.py:740:build(): Running: swig --version
setup.py:742:build(): swig_version_text='\nSWIG Version 4.4.0\n\nCompiled with c++ [i586-alpine-linux-musl]\n\nConfigured options: +pcre\n\nPlease see https://www.swig.org for reporting bugs and further information\n'
setup.py:751:build(): swig_version='4.4.0'
pipcl.py:2946:add_file(): Adding file: src/__init__.py => pymupdf/__init__.py
pipcl.py:2946:add_file(): Adding file: src/__main__.py => pymupdf/__main__.py
pipcl.py:2946:add_file(): Adding file: src/pymupdf.py => pymupdf/pymupdf.py
pipcl.py:2946:add_file(): Adding file: src/table.py => pymupdf/table.py
pipcl.py:2946:add_file(): Adding file: src/utils.py => pymupdf/utils.py
pipcl.py:2946:add_file(): Adding file: src/_wxcolors.py => pymupdf/_wxcolors.py
pipcl.py:2946:add_file(): Adding file: src/_apply_pages.py => pymupdf/_apply_pages.py
pipcl.py:2946:add_file(): Adding file: src/build/extra.py => pymupdf/extra.py
pipcl.py:2946:add_file(): Adding file: src/build/_extra.so => pymupdf/_extra.so
pipcl.py:2946:add_file(): Adding file: src/fitz___init__.py => fitz/__init__.py
pipcl.py:2946:add_file(): Adding file: src/fitz_table.py => fitz/table.py
pipcl.py:2946:add_file(): Adding file: src/fitz_utils.py => fitz/utils.py
pipcl.py:2946:add_file(): Adding file: README.md => pymupdf-1.26.4.dist-info/README.md
pipcl.py:849:tag_platform(): From self.tag_platform_: ret=None.
pipcl.py:857:tag_platform(): From AUDITWHEEL_PLAT: ret=None.
pipcl.py:872:tag_platform(): From sysconfig.get_platform(): ret='linux_i686'.
pipcl.py:886:tag_platform(): tag_platform(): returning ret='linux_i686'.
pipcl.py:721:build_wheel(): Have created wheel size=1,312,077: .dist/pymupdf-1.26.4-cp312-abi3-linux_i686.whl
2025-11-14 16:00:03,023 gpep517 INFO The backend produced .dist/pymupdf-1.26.4-cp312-abi3-linux_i686.whl
pymupdf-1.26.4-cp312-abi3-linux_i686.whl
>>> py3-pymupdf: Entering fakeroot...
2025-11-14 16:00:03,261 gpep517 INFO Installing .dist/pymupdf-1.26.4-cp312-abi3-linux_i686.whl into /home/buildozer/aports/testing/py3-pymupdf/pkg/py3-pymupdf
2025-11-14 16:00:03,956 gpep517 INFO Installation complete
>>> py3-pymupdf-pyc*: Running split function pyc...
'usr/lib/python3.12/site-packages/pymupdf/__pycache__' -> '/home/buildozer/aports/testing/py3-pymupdf/pkg/py3-pymupdf-pyc/usr/lib/python3.12/site-packages/pymupdf/__pycache__'
'usr/lib/python3.12/site-packages/fitz/__pycache__' -> '/home/buildozer/aports/testing/py3-pymupdf/pkg/py3-pymupdf-pyc/usr/lib/python3.12/site-packages/fitz/__pycache__'
>>> py3-pymupdf-pyc*: Preparing subpackage py3-pymupdf-pyc...
>>> py3-pymupdf-pyc*: Running postcheck for py3-pymupdf-pyc
>>> py3-pymupdf*: Running postcheck for py3-pymupdf
>>> py3-pymupdf*: Preparing package py3-pymupdf...
>>> py3-pymupdf*: Stripping binaries
>>> py3-pymupdf*: Scanning shared objects
>>> py3-pymupdf-pyc*: Tracing dependencies...
	python3~3.12
>>> py3-pymupdf-pyc*: Package size: 1.3 MB
>>> py3-pymupdf-pyc*: Compressing data...
>>> py3-pymupdf-pyc*: Create checksum...
>>> py3-pymupdf-pyc*: Create py3-pymupdf-pyc-1.26.4-r1.apk
>>> py3-pymupdf*: Tracing dependencies...
	py3-mupdf
	python3~3.12
	so:libc.musl-x86.so.1
	so:libgcc_s.so.1
	so:libmupdf.so.26.11
	so:libmupdfcpp.so.26.11
	so:libstdc++.so.6
>>> py3-pymupdf*: Package size: 1.2 MB
>>> py3-pymupdf*: Compressing data...
>>> py3-pymupdf*: Create checksum...
>>> py3-pymupdf*: Create py3-pymupdf-1.26.4-r1.apk
>>> py3-pymupdf: Build complete at Fri, 14 Nov 2025 16:00:04 +0000 elapsed time 0h 0m 15s
>>> py3-pymupdf: Cleaning up srcdir
>>> py3-pymupdf: Cleaning up pkgdir
>>> py3-pymupdf: Uninstalling dependencies...
( 1/44) Purging .makedepends-py3-pymupdf (20251114.155951)
( 2/44) Purging py3-mupdf (1.26.11-r0)
( 3/44) Purging mupdf-dev (1.26.11-r0)
( 4/44) Purging mupdf-cpp (1.26.11-r0)
( 5/44) Purging mupdf-libs (1.26.11-r0)
( 6/44) Purging py3-setuptools-pyc (80.9.0-r2)
( 7/44) Purging py3-setuptools (80.9.0-r2)
( 8/44) Purging py3-gpep517-pyc (19-r1)
( 9/44) Purging py3-gpep517 (19-r1)
(10/44) Purging py3-installer-pyc (0.7.0-r2)
(11/44) Purging py3-installer (0.7.0-r2)
(12/44) Purging py3-wheel-pyc (0.46.1-r0)
(13/44) Purging py3-wheel (0.46.1-r0)
(14/44) Purging py3-packaging-pyc (25.0-r0)
(15/44) Purging py3-packaging (25.0-r0)
(16/44) Purging py3-parsing-pyc (3.2.3-r0)
(17/44) Purging py3-parsing (3.2.3-r0)
(18/44) Purging python3-dev (3.12.12-r0)
(19/44) Purging python3-pyc (3.12.12-r0)
(20/44) Purging python3-pycache-pyc0 (3.12.12-r0)
(21/44) Purging pyc (3.12.12-r0)
(22/44) Purging python3 (3.12.12-r0)
(23/44) Purging swig (4.4.0-r0)
(24/44) Purging gdbm (1.26-r0)
(25/44) Purging gumbo-parser (0.13.2-r0)
(26/44) Purging harfbuzz (11.3.2-r0)
(27/44) Purging jbig2dec (0.20-r0)
(28/44) Purging libjpeg-turbo (3.1.2-r0)
(29/44) Purging libpanelw (6.5_p20251010-r0)
(30/44) Purging mpdecimal (4.0.1-r0)
(31/44) Purging mujs-libs (1.3.6-r0)
(32/44) Purging openjpeg (2.5.4-r1)
(33/44) Purging sqlite-libs (3.51.0-r0)
(34/44) Purging xz-libs (5.8.1-r0)
(35/44) Purging freetype (2.13.3-r0)
(36/44) Purging glib (2.86.1-r0)
(37/44) Purging graphite2 (1.3.14-r6)
(38/44) Purging libmount (2.41.2-r0)
(39/44) Purging libblkid (2.41.2-r0)
(40/44) Purging libbz2 (1.0.8-r6)
(41/44) Purging libeconf (0.8.0-r0)
(42/44) Purging libffi (3.5.2-r0)
(43/44) Purging libintl (0.24.1-r1)
(44/44) Purging libpng (1.6.49-r0)
busybox-1.37.0-r25.trigger: Executing script...
OK: 426 MiB in 105 packages
>>> py3-pymupdf: Updating the testing/x86 repository index...
>>> py3-pymupdf: Signing the index...