>>> thermald: Building testing/thermald 2.5.6-r0 (using abuild 3.12.0-r2) started Thu, 25 Jan 2024 22:34:45 +0000 >>> thermald: Checking sanity of /home/buildozer/aports/testing/thermald/APKBUILD... >>> thermald: Analyzing dependencies... >>> thermald: Installing for build: build-base autoconf automake libtool dbus-glib-dev libxml2-dev linux-headers autoconf-archive gtk-doc upower-dev libevdev-dev (1/71) Installing m4 (1.4.19-r3) (2/71) Installing perl (5.38.2-r0) (3/71) Installing autoconf (2.72-r0) (4/71) Installing automake (1.16.5-r2) (5/71) Installing libltdl (2.4.7-r3) (6/71) Installing libtool (2.4.7-r3) (7/71) Installing dbus-libs (1.14.10-r1) (8/71) Installing libffi (3.4.4-r3) (9/71) Installing libintl (0.22.4-r0) (10/71) Installing libblkid (2.39.3-r0) (11/71) Installing libmount (2.39.3-r0) (12/71) Installing glib (2.78.4-r0) (13/71) Installing dbus-glib (0.112-r6) (14/71) Installing libuuid (2.39.3-r0) (15/71) Installing libfdisk (2.39.3-r0) (16/71) Installing libsmartcols (2.39.3-r0) (17/71) Installing util-linux-dev (2.39.3-r0) (18/71) Installing dbus-dev (1.14.10-r1) (19/71) Installing bzip2-dev (1.0.8-r6) (20/71) Installing libxml2 (2.12.4-r0) (21/71) Installing libxml2-utils (2.12.4-r0) (22/71) Installing docbook-xml (4.5-r8) Executing docbook-xml-4.5-r8.post-install (23/71) Installing libgpg-error (1.47-r2) (24/71) Installing libgcrypt (1.10.3-r0) (25/71) Installing libxslt (1.1.39-r0) (26/71) Installing docbook-xsl (1.79.2-r8) Executing docbook-xsl-1.79.2-r8.post-install (27/71) Installing xz (5.4.5-r0) (28/71) Installing gettext-asprintf (0.22.4-r0) (29/71) Installing gettext-libs (0.22.4-r0) (30/71) Installing gettext-envsubst (0.22.4-r0) (31/71) Installing gettext (0.22.4-r0) (32/71) Installing gettext-dev (0.22.4-r0) (33/71) Installing gdbm (1.23-r1) (34/71) Installing mpdecimal (4.0.0-r0) (35/71) Installing libpanelw (6.4_p20231125-r0) (36/71) Installing readline (8.2.10-r0) (37/71) Installing sqlite-libs (3.45.0-r0) (38/71) Installing python3 (3.11.7-r1) (39/71) Installing python3-pycache-pyc0 (3.11.7-r1) (40/71) Installing pyc (3.11.7-r1) (41/71) Installing python3-pyc (3.11.7-r1) (42/71) Installing linux-headers (6.6-r0) (43/71) Installing libffi-dev (3.4.4-r3) (44/71) Installing bsd-compat-headers (0.7.2-r5) (45/71) Installing libformw (6.4_p20231125-r0) (46/71) Installing libmenuw (6.4_p20231125-r0) (47/71) Installing libncurses++ (6.4_p20231125-r0) (48/71) Installing ncurses-dev (6.4_p20231125-r0) (49/71) Installing libedit-dev (20230828.3.1-r4) (50/71) Installing zlib-dev (1.3.1-r0) (51/71) Installing libpcre2-16 (10.42-r2) (52/71) Installing libpcre2-32 (10.42-r2) (53/71) Installing pcre2-dev (10.42-r2) (54/71) Installing glib-dev (2.78.4-r0) (55/71) Installing dbus-glib-dev (0.112-r6) (56/71) Installing xz-dev (5.4.5-r0) (57/71) Installing libxml2-dev (2.12.4-r0) (58/71) Installing autoconf-archive (2023.02.20-r0) (59/71) Installing py3-pygments (2.17.2-r0) (60/71) Installing py3-pygments-pyc (2.17.2-r0) (61/71) Installing gtk-doc (1.33.2-r3) (62/71) Installing eudev-libs (3.2.14-r1) (63/71) Installing libgudev (238-r0) (64/71) Installing upower (1.90.2-r0) (65/71) Installing upower-dev (1.90.2-r0) (66/71) Installing libevdev (1.13.1-r0) (67/71) Installing libevdev-dev (1.13.1-r0) (68/71) Installing .makedepends-thermald (20240125.223446) (69/71) Installing perl-error (0.17029-r2) (70/71) Installing perl-git (2.43.0-r2) (71/71) Installing git-perl (2.43.0-r2) Executing busybox-1.36.1-r19.trigger Executing glib-2.78.4-r0.trigger No schema files found: doing nothing. OK: 524 MiB in 184 packages >>> thermald: Cleaning up srcdir >>> thermald: Cleaning up pkgdir >>> thermald: Cleaning up tmpdir >>> thermald: Fetching https://distfiles.alpinelinux.org/distfiles/edge/thermald-2.5.6.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 146 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (22) The requested URL returned error: 404 >>> thermald: Fetching thermald-2.5.6.tar.gz::https://github.com/intel/thermal_daemon/archive/v2.5.6.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 178k 0 178k 0 0 319k 0 --:--:-- --:--:-- --:--:-- 319k >>> thermald: Fetching https://distfiles.alpinelinux.org/distfiles/edge/thermald-2.5.6.tar.gz >>> thermald: Checking sha512sums... thermald-2.5.6.tar.gz: OK thermald.initd: OK >>> thermald: Unpacking /var/cache/distfiles/edge/thermald-2.5.6.tar.gz... aclocal: installing 'm4/ax_check_compile_flag.m4' from '/usr/share/aclocal/ax_check_compile_flag.m4' aclocal: installing 'm4/gtk-doc.m4' from '/usr/share/aclocal/gtk-doc.m4' aclocal: installing 'm4/pkg.m4' from '/usr/share/aclocal/pkg.m4' autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal autoreconf: configure.ac: tracing autoreconf: configure.ac: creating directory build-aux autoreconf: configure.ac: not using Libtool autoreconf: configure.ac: not using Intltool autoreconf: running: gtkdocize --copy autoreconf: running: /usr/bin/autoconf autoreconf: running: /usr/bin/autoheader autoreconf: running: automake --add-missing --copy --no-force configure.ac:68: installing 'build-aux/compile' configure.ac:15: installing 'build-aux/install-sh' configure.ac:15: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' docs/Makefile.am:51: warning: EXTRA_DIST multiply defined in condition TRUE ... gtk-doc.make:51: ... 'EXTRA_DIST' previously defined here docs/Makefile.am:49: 'gtk-doc.make' included from here autoreconf: Leaving directory '.' checking whether make supports nested variables... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for gtk-doc... yes checking for gtkdoc-check... gtkdoc-check.test checking for gtkdoc-check... /usr/bin/gtkdoc-check checking for gtkdoc-rebase... /usr/bin/gtkdoc-rebase checking for gtkdoc-mkpdf... /usr/bin/gtkdoc-mkpdf checking whether to build gtk-doc documentation... no checking for glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes System paths: prefix: NONE exec_prefix: NONE systemdunitdir: tdbinary: ${exec_prefix}/sbin/thermald tdconfdir: ${prefix}/etc/thermald tdrundir: ${prefix}/var/run/thermald checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for dbus_glib_global_set_disable_legacy_property_access in -ldbus-glib-1... yes checking for dbus-1 >= 1.1 dbus-glib-1 >= 0.94... yes checking for gio-unix-2.0 >= 2.22 gmodule-2.0... yes checking for libxml-2.0 >= 2.4... yes checking for gdbus-codegen... /usr/bin/gdbus-codegen checking for liblzma... yes checking for upower-glib... yes checking for libevdev... yes checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking whether the compiler supports GNU C++... yes checking whether g++ accepts -g... yes checking for g++ option to enable C++11 features... none needed checking dependency style of g++... gcc3 checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for size_t... yes checking whether C compiler accepts -Werror -Wall... yes checking whether C compiler accepts -Werror -Wclobbered... yes checking whether C compiler accepts -Werror -Wempty-body... yes checking whether C compiler accepts -Werror -Wformat... yes checking whether C compiler accepts -Werror -Wignored-qualifiers... yes checking whether C compiler accepts -Werror -Wmissing-field-initializers... yes checking whether C compiler accepts -Werror -Wreorder... no checking whether C compiler accepts -Werror -Wreturn-type... yes checking whether C compiler accepts -Werror -Wsign-compare... yes checking whether C compiler accepts -Werror -Wtype-limits... yes checking whether C compiler accepts -Werror -Wuninitialized... yes checking whether C compiler accepts -Werror -Wunused-but-set-variable... yes checking whether C compiler accepts -std=c++0x... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating docs/Makefile config.status: creating docs/version.xml config.status: creating data/Makefile config.status: creating config.h config.status: executing depfiles commands Now type 'make' to compile .. checking whether make supports nested variables... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for i586-alpine-linux-musl-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for gtk-doc... yes checking for gtkdoc-check... gtkdoc-check.test checking for gtkdoc-check... /usr/bin/gtkdoc-check checking for gtkdoc-rebase... /usr/bin/gtkdoc-rebase checking for gtkdoc-mkpdf... /usr/bin/gtkdoc-mkpdf checking whether to build gtk-doc documentation... no checking for glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0... yes checking for i586-alpine-linux-musl-pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes System paths: prefix: /usr exec_prefix: NONE systemdunitdir: tdbinary: ${exec_prefix}/sbin/thermald tdconfdir: /etc/thermald tdrundir: /var/run/thermald checking whether make supports the include directive... yes (GNU style) checking for i586-alpine-linux-musl-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for dbus_glib_global_set_disable_legacy_property_access in -ldbus-glib-1... yes checking for dbus-1 >= 1.1 dbus-glib-1 >= 0.94... yes checking for gio-unix-2.0 >= 2.22 gmodule-2.0... yes checking for libxml-2.0 >= 2.4... yes checking for gdbus-codegen... /usr/bin/gdbus-codegen checking for liblzma... yes checking for upower-glib... yes checking for libevdev... yes checking for i586-alpine-linux-musl-gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking whether the compiler supports GNU C++... yes checking whether g++ accepts -g... yes checking for g++ option to enable C++11 features... none needed checking dependency style of g++... gcc3 checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for size_t... yes checking whether C compiler accepts -Werror -Wall... yes checking whether C compiler accepts -Werror -Wclobbered... yes checking whether C compiler accepts -Werror -Wempty-body... yes checking whether C compiler accepts -Werror -Wformat... yes checking whether C compiler accepts -Werror -Wignored-qualifiers... yes checking whether C compiler accepts -Werror -Wmissing-field-initializers... yes checking whether C compiler accepts -Werror -Wreorder... no checking whether C compiler accepts -Werror -Wreturn-type... yes checking whether C compiler accepts -Werror -Wsign-compare... yes checking whether C compiler accepts -Werror -Wtype-limits... yes checking whether C compiler accepts -Werror -Wuninitialized... yes checking whether C compiler accepts -Werror -Wunused-but-set-variable... yes checking whether C compiler accepts -std=c++0x... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating docs/Makefile config.status: creating docs/version.xml config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/build-aux/missing' aclocal-1.16 CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/build-aux/missing' autoconf cd . && /bin/sh /home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/build-aux/missing automake-1.16 --foreign /bin/sh ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=i586-alpine-linux-musl --host=i586-alpine-linux-musl --prefix=/usr --sysconfdir=/etc --mandir=/usr/share/man --disable-werror --localstatedir=/var build_alias=i586-alpine-linux-musl host_alias=i586-alpine-linux-musl CC=gcc CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs CXX=g++ CXXFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 --no-create --no-recursion checking whether make supports nested variables... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... docs/Makefile.am:51: warning: EXTRA_DIST multiply defined in condition TRUE ... gtk-doc.make:51: ... 'EXTRA_DIST' previously defined here docs/Makefile.am:49: 'gtk-doc.make' included from here yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for i586-alpine-linux-musl-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for gtk-doc... yes checking for gtkdoc-check... gtkdoc-check.test checking for gtkdoc-check... /usr/bin/gtkdoc-check checking for gtkdoc-rebase... /usr/bin/gtkdoc-rebase checking for gtkdoc-mkpdf... /usr/bin/gtkdoc-mkpdf checking whether to build gtk-doc documentation... no checking for glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0... yes checking for i586-alpine-linux-musl-pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes System paths: prefix: /usr exec_prefix: NONE systemdunitdir: tdbinary: ${exec_prefix}/sbin/thermald tdconfdir: /etc/thermald tdrundir: /var/run/thermald checking whether make supports the include directive... yes (GNU style) checking for i586-alpine-linux-musl-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for dbus_glib_global_set_disable_legacy_property_access in -ldbus-glib-1... yes checking for dbus-1 >= 1.1 dbus-glib-1 >= 0.94... yes checking for gio-unix-2.0 >= 2.22 gmodule-2.0... yes checking for libxml-2.0 >= 2.4... yes checking for gdbus-codegen... /usr/bin/gdbus-codegen checking for liblzma... yes checking for upower-glib... yes checking for libevdev... yes checking for i586-alpine-linux-musl-gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking whether the compiler supports GNU C++... yes checking whether g++ accepts -g... yes checking for g++ option to enable C++11 features... none needed checking dependency style of g++... gcc3 checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for size_t... yes checking whether C compiler accepts -Werror -Wall... yes checking whether C compiler accepts -Werror -Wclobbered... yes checking whether C compiler accepts -Werror -Wempty-body... yes checking whether C compiler accepts -Werror -Wformat... yes checking whether C compiler accepts -Werror -Wignored-qualifiers... yes checking whether C compiler accepts -Werror -Wmissing-field-initializers... yes checking whether C compiler accepts -Werror -Wreorder... no checking whether C compiler accepts -Werror -Wreturn-type... yes checking whether C compiler accepts -Werror -Wsign-compare... yes checking whether C compiler accepts -Werror -Wtype-limits... yes checking whether C compiler accepts -Werror -Wuninitialized... yes checking whether C compiler accepts -Werror -Wunused-but-set-variable... yes checking whether C compiler accepts -std=c++0x... yes checking that generated files are newer than configure... done configure: creating ./config.status /bin/sh ./config.status config.status: creating Makefile config.status: creating docs/Makefile config.status: creating docs/version.xml config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands GEN thd_dbus_interface.h (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/build-aux/missing' autoheader) GEN thermald-resource.c WARNING: Using --header and --body at the same time is deprecated; use --body --prototypes instead INFO: Reading /tmp/dbus-binding-tool-c-marshallers.U47CI2... rm -f stamp-h1 touch config.h.in cd . && /bin/sh ./config.status config.h config.status: creating config.h config.status: config.h is unchanged make all-recursive make[1]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' Making all in . make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' CC thermald-thermald-resource.o CXX src/thermald-main.o CXX src/thermald-thd_dbus_interface.o CXX src/thermald-thd_engine.o CXX src/thermald-thd_cdev.o CXX src/thermald-thd_cdev_therm_sys_fs.o CXX src/thermald-thd_engine_default.o CXX src/thermald-thd_engine_adaptive.o CXX src/thermald-thd_sys_fs.o CXX src/thermald-thd_trip_point.o CXX src/thermald-thd_zone.o CXX src/thermald-thd_zone_cpu.o CXX src/thermald-thd_zone_therm_sys_fs.o CXX src/thermald-thd_zone_dynamic.o CXX src/thermald-thd_preference.o CXX src/thermald-thd_parse.o CXX src/thermald-thd_sensor.o CXX src/thermald-thd_sensor_virtual.o CXX src/thermald-thd_kobj_uevent.o CXX src/thermald-thd_cdev_order_parser.o CXX src/thermald-thd_cdev_gen_sysfs.o CXX src/thermald-thd_pid.o CXX src/thermald-thd_zone_generic.o CXX src/thermald-thd_cdev_cpufreq.o CXX src/thermald-thd_cdev_rapl.o CXX src/thermald-thd_cdev_intel_pstate_driver.o CXX src/thermald-thd_rapl_power_meter.o CXX src/thermald-thd_trt_art_reader.o CXX src/thermald-thd_cdev_rapl_dram.o CXX src/thermald-thd_cpu_default_binding.o CXX src/thermald-thd_cdev_backlight.o CXX src/thermald-thd_cdev_modem.o CXX src/thermald-thd_int3400.o CXX src/thermald-thd_cdev_kbl_amdgpu.o CXX src/thermald-thd_sensor_kbl_amdgpu_power.o CXX src/thermald-thd_sensor_kbl_amdgpu_thermal.o CXX src/thermald-thd_zone_kbl_g_mcp.o CXX src/thermald-thd_sensor_kbl_g_mcp.o CXX src/thermald-thd_zone_kbl_amdgpu.o CXX src/thermald-thd_sensor_rapl_power.o CXX src/thermald-thd_zone_rapl_power.o CXX src/thermald-thd_gddv.o CXXLD thermald make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' Making all in docs make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' Making all in data make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[1]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' >>> WARNING: thermald: APKBUILD does not run any tests! Alpine policy will soon require that packages have any relevant testsuites run during the build process. To fix, either define a check() function, or declare !check in $options to indicate the package does not have a testsuite. >>> thermald: Entering fakeroot... make install-recursive make[1]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' Making install in . make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' make[3]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' /bin/mkdir -p '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/man/man5' /bin/mkdir -p '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/man/man8' /bin/mkdir -p '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/sbin' /usr/bin/install -c -m 644 man/thermal-conf.xml.5 '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/man/man5' /usr/bin/install -c -m 644 man/thermald.8 '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/man/man8' /usr/bin/install -c thermald '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/sbin' make[3]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' Making install in docs make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' make[3]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' make[3]: Nothing to be done for 'install-exec-am'. Nothing to install make[3]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/docs' Making install in data make[2]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[3]: Entering directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/dbus-1/system.d' /bin/mkdir -p '/home/buildozer/aports/testing/thermald/pkg/thermald/etc/thermald' /usr/bin/install -c -m 644 org.freedesktop.thermald.conf '/home/buildozer/aports/testing/thermald/pkg/thermald/usr/share/dbus-1/system.d' /usr/bin/install -c -m 644 thermal-cpu-cdev-order.xml '/home/buildozer/aports/testing/thermald/pkg/thermald/etc/thermald' make[3]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[2]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6/data' make[1]: Leaving directory '/home/buildozer/aports/testing/thermald/src/thermal_daemon-2.5.6' >>> thermald-doc*: Running split function doc... >>> thermald-doc*: Preparing subpackage thermald-doc... >>> thermald-doc*: Running postcheck for thermald-doc >>> thermald-openrc*: Running split function openrc... >>> thermald-openrc*: Preparing subpackage thermald-openrc... >>> thermald-openrc*: Running postcheck for thermald-openrc >>> thermald*: Running postcheck for thermald >>> thermald*: Preparing package thermald... >>> thermald*: Stripping binaries >>> thermald-doc*: Scanning shared objects >>> thermald-openrc*: Scanning shared objects >>> thermald*: Scanning shared objects >>> thermald-doc*: Tracing dependencies... >>> thermald-doc*: Package size: 36.0 KB >>> thermald-doc*: Compressing data... >>> thermald-doc*: Create checksum... >>> thermald-doc*: Create thermald-doc-2.5.6-r0.apk >>> thermald-openrc*: Tracing dependencies... >>> thermald-openrc*: Package size: 16.0 KB >>> thermald-openrc*: Compressing data... >>> thermald-openrc*: Create checksum... >>> thermald-openrc*: Create thermald-openrc-2.5.6-r0.apk >>> thermald*: Tracing dependencies... so:libc.musl-x86.so.1 so:libdbus-1.so.3 so:libdbus-glib-1.so.2 so:libevdev.so.2 so:libgcc_s.so.1 so:libgio-2.0.so.0 so:libglib-2.0.so.0 so:libgmodule-2.0.so.0 so:libgobject-2.0.so.0 so:libintl.so.8 so:liblzma.so.5 so:libstdc++.so.6 so:libupower-glib.so.3 so:libxml2.so.2 >>> thermald*: Package size: 488.0 KB >>> thermald*: Compressing data... >>> thermald*: Create checksum... >>> thermald*: Create thermald-2.5.6-r0.apk >>> thermald: Build complete at Thu, 25 Jan 2024 22:35:29 +0000 elapsed time 0h 0m 44s >>> thermald: Cleaning up srcdir >>> thermald: Cleaning up pkgdir >>> thermald: Uninstalling dependencies... (1/71) Purging .makedepends-thermald (20240125.223446) (2/71) Purging automake (1.16.5-r2) (3/71) Purging libtool (2.4.7-r3) (4/71) Purging libltdl (2.4.7-r3) (5/71) Purging dbus-glib-dev (0.112-r6) (6/71) Purging libxml2-dev (2.12.4-r0) (7/71) Purging autoconf-archive (2023.02.20-r0) (8/71) Purging autoconf (2.72-r0) (9/71) Purging m4 (1.4.19-r3) (10/71) Purging gtk-doc (1.33.2-r3) (11/71) Purging py3-pygments-pyc (2.17.2-r0) (12/71) Purging py3-pygments (2.17.2-r0) (13/71) Purging upower-dev (1.90.2-r0) (14/71) Purging upower (1.90.2-r0) (15/71) Purging libevdev-dev (1.13.1-r0) (16/71) Purging libevdev (1.13.1-r0) (17/71) Purging dbus-dev (1.14.10-r1) (18/71) Purging dbus-glib (0.112-r6) (19/71) Purging dbus-libs (1.14.10-r1) (20/71) Purging git-perl (2.43.0-r2) (21/71) Purging perl-git (2.43.0-r2) (22/71) Purging perl-error (0.17029-r2) (23/71) Purging perl (5.38.2-r0) (24/71) Purging glib-dev (2.78.4-r0) (25/71) Purging bzip2-dev (1.0.8-r6) (26/71) Purging docbook-xsl (1.79.2-r8) Executing docbook-xsl-1.79.2-r8.post-deinstall (27/71) Purging docbook-xml (4.5-r8) Executing docbook-xml-4.5-r8.post-deinstall (28/71) Purging gettext-dev (0.22.4-r0) (29/71) Purging gettext-asprintf (0.22.4-r0) (30/71) Purging gettext (0.22.4-r0) (31/71) Purging gettext-envsubst (0.22.4-r0) (32/71) Purging libxml2-utils (2.12.4-r0) (33/71) Purging libxslt (1.1.39-r0) (34/71) Purging libffi-dev (3.4.4-r3) (35/71) Purging linux-headers (6.6-r0) (36/71) Purging libgcrypt (1.10.3-r0) (37/71) Purging libgpg-error (1.47-r2) (38/71) Purging libgudev (238-r0) (39/71) Purging libxml2 (2.12.4-r0) (40/71) Purging pcre2-dev (10.42-r2) (41/71) Purging libedit-dev (20230828.3.1-r4) (42/71) Purging bsd-compat-headers (0.7.2-r5) (43/71) Purging ncurses-dev (6.4_p20231125-r0) (44/71) Purging libncurses++ (6.4_p20231125-r0) (45/71) Purging zlib-dev (1.3.1-r0) (46/71) Purging libpcre2-16 (10.42-r2) (47/71) Purging libpcre2-32 (10.42-r2) (48/71) Purging python3-pyc (3.11.7-r1) (49/71) Purging python3-pycache-pyc0 (3.11.7-r1) (50/71) Purging pyc (3.11.7-r1) (51/71) Purging util-linux-dev (2.39.3-r0) (52/71) Purging libfdisk (2.39.3-r0) (53/71) Purging libsmartcols (2.39.3-r0) (54/71) Purging libuuid (2.39.3-r0) (55/71) Purging xz-dev (5.4.5-r0) (56/71) Purging xz (5.4.5-r0) (57/71) Purging eudev-libs (3.2.14-r1) (58/71) Purging python3 (3.11.7-r1) (59/71) Purging gdbm (1.23-r1) (60/71) Purging gettext-libs (0.22.4-r0) (61/71) Purging glib (2.78.4-r0) (62/71) Purging libmount (2.39.3-r0) (63/71) Purging libblkid (2.39.3-r0) (64/71) Purging libffi (3.4.4-r3) (65/71) Purging libformw (6.4_p20231125-r0) (66/71) Purging libintl (0.22.4-r0) (67/71) Purging libmenuw (6.4_p20231125-r0) (68/71) Purging libpanelw (6.4_p20231125-r0) (69/71) Purging mpdecimal (4.0.0-r0) (70/71) Purging readline (8.2.10-r0) (71/71) Purging sqlite-libs (3.45.0-r0) Executing busybox-1.36.1-r19.trigger OK: 379 MiB in 113 packages >>> thermald: Updating the testing/x86 repository index... >>> thermald: Signing the index...